Hide Button Advanced Search in the Account

Hi Colleagues,
in CRM 4.0 I try to hide the Advanced Search Button for the User in the search area and need to know if I can hide the button with customizing or not?
Please can you help or asssist?
Application: COMM_BUPAR (Account)
Event: INIT
Fieldgroup: RES_SEARCH_04
Structure: CRMT_BSP_SEARESQ_RESELL
Search Group: ACC
Regards, Anja

Did you try the transaction variant for this? The transaction code for maintaining transaction variants is SHD0. The generic flow of configuration for a transaction variant is:
A) CREATE SCREEN VARIANTS - Create a screen variant for a program name and screen number
B) CREATE TRANSACTION VARIANT - Create a transaction variant and assign the screen variants create above to this transaction variant
C) SET DEFAULT TRANSACTION VARIANT - Set the transaction variant create above (in point B) as the default transaction variant so it becomes applicable for all users. Advance setting is possible to assign the transaction variant to specific user or user groups.
Let me know if this works.

Similar Messages

  • Error when doing a search in the Account Dim

    I get this error sometimes: "The member exists in NEXT...Do you want to expand?"
    It only happens in the Account dimension and when the view is ID and Description. Any Ideas? Thx.

    I've just had the same issue on my system, where I would see "The member exists in NEXT...."
    It wasn't on all dimensions, but was on most of them within one of the Applications.
    I took a note of the dimensions that gave the error and then did a Full Process on each individual dimension that was affected.
    Following that, I logged out of BPC Excel and back in.
    Once I had done that, everything worked perfectly again
    I don't know if this will resolve your issue, but good luck with it.
    Craig

  • How can I do an 'advanced' search in the 'Find Bar'?

    I want to be able to search for any instance of either "hour" or "min" (for example) in an open page. Is there any way to do this? (e.g. hour | min, "hour" OR "min", etc.)
    == This happened ==
    A few times a week
    == I started wanting to do more complex 'Find Bar' searches.

    https://addons.mozilla.org/en-US/firefox/addon/99836/ does this
    The bug filed for having this built-in to Firefox is:
    https://bugzilla.mozilla.org/show_bug.cgi?id=298127

  • New field in account advanced search

    Hello Experts,
    I'm facing issue where the new field is not showing up on the advanced search screen for account (CRMM_ACCOUNT).  The new field has been added to both search request and search result structure.  The logic has also been implemented to incorporate the new field into the search query. 
    When add this new field to the field group, the field displays on the 'Get' drop down box and I was able to search by this new field fine.  However, it doesn't get display on the advanced search screen.
    Any help would be appreciated.
    Thanks,
    --Jamie.

    Hi Jamie,
    What i understand is the field has been added in Field Grp ACC_SEARCH_LOG_04 but its not showing up in Advanced Search right. I hope you should do this step i.e  Goto-> Layout Generation and Uncheck 'Only Check Fields Groups' from the checkbox and Enter the Field Grp in Field Grp field over there then execute it. Hope you can see the Custom field there.
    When you click Show advanced search you can see the 'Find Dropdownlist box ' select 'All Accounts' value from there and check whether your custom field is populating there or not.
    Thanks,
    Raju

  • Advance Search Button and iPad Reader-how to troubleshoot?

    I have a collection (1100 pages) that was the result of merging 136 individual PDF's derived form Microsoft Word files into one collection. I've added bookmarks and a bookmark button to perform and advanced search. The translation is nice.
    On the laptop/desktop the button works as anticipated.
    On the iPad (most current reader) nothing happens. However the search icon (magnifying glass) on the tool bar performs.
    Not to confuse my audience should I have 2 flavors-iPad vs all other platforms? Reader/laptop does not have a search icon option but it is available under Edit/Advanced Search.
    Also there are hyperlinks in several locations. These do not fire up Safari on the iPad. Might this be a limitation or do I have to do some unique coding. In this case I have about 140 instances throughout the collection.
    If this is a limit due to the Reader/iOS I can probably get away with "this is not supported" statement for this release (September 1).
    One OT: The Search function on the iPad (first gen) works but it is not as quick as on the laptop/desktop. Just an observation. Happy to have Adobe in teh stable of PDF readers for the iPad.

    Thanks. For this application there are a potential universe of 17K members. $10 for an app will not fit the scenario. Nevertheless the Reader is a great start and I can control the download options (kiosk system at convention) to list "laptop/desktop" versus iPad.
    Could you elaborate on how to get links to work? I've got the original Word documents, its derived PDF and using Acrobat Pro X (Mac). There are about a dozen obvious links that I'd like to try to get to work and learn how to make this work.

  • Disable, hide or disappear 'Search' from Start on account

    Here is my problem, I have a computer with two accounts, Teacher (administrator) and Kids (standard /child), both are local accounts and would like to Disable, hide or disappear ' Search' from the Start Screen on the Kids account only! Any ideas? I know
    this is possible using Group Policy Editor, but this would affect both accounts, any help will be appreciated.
    Thank you
    Rafael
    Forgot to mention that I'm also aware that it can be turn off on in Control Panel/Turn Windows Features On or Off 

    Hi,
    Even we hide the search bar in the start screen, kid can still search in other locations like Windows explorer or Internet explorer, so what is your final purpose? Maybe we can find a alterative solution. BTW, how about Kiosk metioned by Robert?
    Yolanda Zhu
    TechNet Community Support

  • Want to change the labels on the buttons on search criteria

    Want to change the labels on the buttons on search criteria as i work on Arabic ADF Project
    i want to change the label of "SEARCH" button , "ADVANCES SEARCH" , "BASIC" , "SAVED SEARCH"
    i don't know how to change this labels as when i drug search criteria over the form i don't know how to change this fields
    thanks i advance

    Hi,
    Arabic language is supported by ADF Faces RC on the fly. When you incorporate localization in your application and set the locale attribute of your page's <f:view> tag to "ar", the labels of the query component will already be shown in Arabic. Please see sample code snippet below:
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
              xmlns:f="http://java.sun.com/jsf/core"
              xmlns:h="http://java.sun.com/jsf/html"
              xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <jsp:directive.page contentType="text/html;charset=UTF-8"/>
      <f:view locale="ar">
    ....Please see the following blog-post for details: http://soadev.blogspot.com/2010/03/adf-faces-rc-supplement-on-how-to.html
    regards,
    Pino

  • Who is Who - dropdown list for fields in the advance search

    Hello:
    In the advance search of the Who is Who service, we have the Organization Unit and Cost Center as searching fields.
    We can't be able to see the dropdown list for these 2 fields from the Portal.
    Do anyone have any idea of what configuration is missing?
    Thanks.
    Regards,

    hi,
    according to my knowledge they don't have Unique ID but unique names attached to them.
    open Outlook
    go to Tools -> Forms -> Design Form -> select Message then right click on 'To' textbox and chose Advance Properties it has a field 'Name' that name can be used for reference in your development.
    hope this helps you.

  • Want to switch off the general search and open the advanced search

    Hi All,
    I want to switch off the general search and open the advanced search when i load my application. For this I have followed the steps previously posted in the forum.
    I have created a version(0001)  and for that version i have checked the open advance search. If i do this way it works perfectly but when i click on the result list the detail tab does not come. But when i remove this settings and go through general search both the advance search and the general search works properly. I am able to get the details tab.
    Why am I not getting the details tab if i open the advanced search directly. Please give your inputs.
    Thanks & Regards,
    Anuradha.P

    Hi Anuradha.
    Please check the following thread:
    URGENT!!! Show Advance Search in INIT event
    Best regards.
    Armando Rodriguez.

  • The accounting is apportioned across the period of the advance charge.

    Hi All,
    We have a new requirement from the business which is as below
    When invoicing in advance, say quarterly, the accounting is apportioned across the period of the advance charge ie if we invoice for Rent in Advance at the beginning of December for the period 25th December 2009 to 24th March 2010 inclusive, the apportionment to the accounts should be:
    7 days in December;
    31 days in January;
    28 days in February and
    24 days in March.
    If any one of you have come accross such type of requirment, your inputs given/provided would be much appreciated.
    Thanks and Regards
    Sri

    Hi all
    Can any one let me know how can I go ahead with this requirement
    Thnks and Rgds
    Sri

  • Issues in Advanced Search

    Hi I am implementing a search page from scratch using Query Bean with advanced search as default panel. I am not sure if Advanced search supports the following:
    1. I have to hide just the advanced search region upon a button (submit) click. Results table should still be shown.
    2. I want to define 10 criteria rows but I would like to show only 4 when the page loads. User should be able to add other criteria manually.
    Can you please let me know if the above are possible using Query Bean and Advanced Search?
    Thanks in advance
    Murari

    Murari,
    See the response inline:
    1. I have to hide just the advanced search region upon a button (submit) click. Results table should still be shown.
    Its feasible.
    2. I want to define 10 criteria rows but I would like to show only 4 when the page loads. User should be able to add other criteria manually.
    This is also feasible.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Portal Advanced Search – default business object

    Within the Shopping Area for Employee Self Services, apart from changing the Application Parameter in the  Advanced Search iView, does anyone know if there is a way of configuring the Advanced Search in the backend of SRM to default to u2018Shopping Cartu2019 instead of u2018Conformationu2019?
    Thanks
    Claire

    Hi,
    if you are using portal-independant navigation you can do the following.
    Go to the corresponding PFCG role and open it in edit mode. On the tab "Menu" click on "Advanced Search" (normally found directly below "Home"). Call the context menu using the right mouse button and click on "Details". For the parameter SAPSRM_BOTYPE change the default value BUS2203 (Confirmation) to the business object you want to use as a default, e.g. BUS2121 for Shopping Cart. Then save the role.
    If this doesn't work make sure that the user in question doesn't have other roles overriding this setting.
    Best regards,
    Marcus

  • ADVANCED SEARCH - dropdown values deletion

    Hi all,
    We are on SRM 7.1.
    query:
    For the employee self service role,for teh link ADVANCED SEARCH,in the dropdown,I want to display only 1 values i.e. PO and Shopping cart.Can someone direct me how can  configure that?
    I klnow the default value in dropdown can be changed but I want to remove some of the entries first in teh dropdown for the field.
    Pls advise.

    Hi,
    You dont need to remove the authorization object from the User profile.
    You jst need to modify data in Authorization profile.
    I tried in my system and I was able to remove it.
    Please follow below step:
    1) T.code PFCG
    2) Give role /SAPSRM/EMPLOYEE (It can be any required role- If you are using customized role you have to pick up role accordingly) and click on change button
    3) Goto Authorizations tab
    4) Click on 'Change authorization data' at lower part of Authorizations tab,which will lead you to another screen
    5) Now expand the BBP component and SRM: Advanced search.Here you can see all the business object for Advance search.
    6) Now double click on object type BUS2203(Basically White color area)
    7) One pop up screen will come, there you can remove the required Business object.
    8)Once it is removed,save and Click on Generate(Shift + F5)
    9) Go n check the advance search option.
    Let me know if you will stuck somewhere.
    Thanks,
    Ankur

  • PCUI Advanced Search Refresh / Trigger by Event

    Hello,
    I created an Advanced Search in the Case Management PCUI. But the search is only started when I change the selection in the shuffler drop-down list. I would like to add a refresh button that triggers the search again, starts a new query and updates the list, since new cases are automatically created by a workflow in the background. There is a REFRESH event, but the PCUI manuals says it should not be used. Any ideas?
    thanks,
    Jari

    How can I make changes to the properties XML and keep multi language support for the Advanced Search Box?
    I am wondering this as well. It doesn't look like there's a good way to translate Managed Properties in SP2013. So we have untranslated text for Refiners, result sort options, and Advanced Search properties.
    It looks like site translation (resources file) should do this, but A) the option is only presented if Publishing is enabled, and B) it doesn't seem to be working anyway.
    The best solution I can come up with is to translate everything dynamically using JavaScript. I'm sure there's a better way, but I haven't been able to find it.

  • Advance search

    Hi all,
    In the advance search,why the data filter (poplist) has only 2 items("is" and s"tarts with") if there is only one criteria?
    Only If I click on the "Add" button to create one more critera,the data filter(poplist) would have other items("is not","contains","end with").
    How to control the poplist's item?
    about the image,you can refer to:
    http://picasaweb.google.com/binghaohuang/OAF/photo#5239812633185033522
    Thanks in advance,
    Binghao
    Edited by: binghao on Aug 28, 2008 10:49 PM

    Hi
    This is done to avoid Blind Query. If there is only one criteria then it should match the String exactly or it should have at least one Starting literal.
    Cheers,
    Ganesh

Maybe you are looking for