Hide certain steps in the execution view

I am trying to modify the TestStand 4.0 simple OI using C# 2005 for the OI and LabVIEW 8.2.1 for the test development.
In many ways, there is more on this "simple" interface than an operator needs to see.
The execution window is too verbose.  I would like to not display step types such as flow control, message box, and action.  I have not been able to find anything in the TS classes to help me with this besides creating my own output window, which seems is a bit excessive.
Is there a way to implement step filtering?
Thanks
Message Edited by John J on 06-12-2007 03:07 PM

Hi Costello,
Currently, there is not a quick and easy solution to the question posed by John J. However, there has been a specific (as opposed to general) solution found on the forums, but it is done for a simple operator interface in LabVIEW, not in C#. This link will take you to that forum discussion. Once you see how Josh's simple operator interface was done in LabVIEW, you should be able to compare the changes in LabVIEW with the original simple operator interface, and apply those changes to your code in C#. If you do not have LabVIEW installed on your computer, I would then recommend downloading the evaluation version of LabVIEW from here. 
Jonathan F.
National Instruments
Applications Engineer

Similar Messages

  • Can I hide certain folders from the 'tree view' under Site Manager - Pages?

    In the above image, is there a way to hide the circled folders from the listing?
    This will help in reducing confusion and possible breakages.

    Hi AirborneAgency,
    unfortunately there is not, educate the admins of this site not to touch these folders instead. That's what I do with my clients and it works just fine.
    Nicole - BCGurus.com   |  http://bcgurus.com/Business-Catalyst-Templates for only $7

  • I want to hide certain pictures in the "Gallery"so only I can see when I want.  How can I do this?

    I want to hide certain pictures in the "Gallery"so only I can see when I want.  How can I do this?

    Sometimes depending on the SD card (you set the sd card to be where photos are sent) and then place a security code on the files and photos. I know this can be done on a computer not 100% sure about a cell phone.
    Another option is to have the photos sent to Picassa (going to be Google+ shortly) or Photo bucket or other web spots for photos or even Drop Box etc. this way your photos are away from the phone, and only the ones on the phone you don't care about remain on the cell
    So I hope it works out ok for you.

  • How to hide a field in the maintenance view (URGENT) ???

    I have created a custom table with following fields:-
    MANDT (mandatory)
    KOKRS (mandatory)
    KHINR (mandatory)
    KHINRNAME
    KOSTL (mandatory)
    KOSTLKHINR
    I have a requirement that i should get a pop-up to fill the value of KOKRS but user should not be able to see its value in the maintenance view.
    I have given the maintenance attribute 'S' to KOKRS field so that pop-up should be there , now please advice on how to prevent KOKRS field to be shown in the maintenance view.

    in SE51 try to change the attributes of the field in the screen. Either visible length to be 0 or check and see if any other attribute would be of help.

  • Hide certain templates in the Project Builder

    Hello friends,
    Is there any way that we can hide the templates like activity element, milestone, PS texts in the project builder.
    As we are not using those templates we want to hide those as those are creating lot of confusions from the end users.
    We have a requirement to hide it.
    Any suggestions to achieve it will be helpful.
    Regards,
    Lohith

    Hi...Lohith...
    you can use the following function modules to accomplish this (for all your users without having them make the changes on their own)
    CNPB_W_READ_PREFS_FROM_DB
    (needs the user id's to read preferences...)
    CNPB_W_WRITE_PREFS_TO_DB
    (in this one you change the preferences of the users to suit your needs, and the necessary indicators, like deactivate activity elements etc)
    and also CNPB_W_SET_PREF_VALUE to change prefs for your userid (for testing it)
    You can try in a test envinronment FM: CNPB_W_SET_PREF_VALUE and set values of parameters 09:activity elements (' ' or 'X') 10:materials etc....
    (after you run FM in se37 goto CJ20N project builder to check on your userid's changes)
    Try it and let me know...(we have done it for some users and it works)
    Cheers
    Panagiotis

  • ADF DVT: Hide certain series of the Horizontal Stacked Bar

    Hello,
    I am trying to achieve a 'waterfall chart' effect by using the <dvt:horizontalBarGraph> of type BAR_HORIZ_STACK. I have really 3 series to show with different colors, but i also provided the 4th series to be the 'offset' value - which tells from which position on Y-axis the first colored bar should be shown. In another word, i created a horizontal stacked bar, with 4 series of data, but i want to hide the bar for 1st series, make it completely transparent.
    I tried to play with <dvt:series> attributes, but can't find 'visible' or 'transparent' or something like that. And i tried to make the background of the first bar to be the same as the chart background - but that won't give good result: First of all, i want to keep the gradient color effect of the bars, but there's no easy way to keep the background to have the same gradient color in the same areat; Second, due to the same reason i can't make a 3D bar to be transparent over a mono-colored background. Third, i want to see the vertical grid lines which connects to the scale values, so even if i make the bar with plain color with no 3D or gradient effect, i will make the background grid lines disconnected.
    Thank you very much for your help!
    Feng

    Achie,
    This is not an issue with the graph as such, but the data issue. Since the value of the data that is being displayed is huge and other datas are relatively very small to occupy the graph area (Ex : 60105 Vs 10).
    You may want to try implementing zoomListener and/or zoomScrollListener for the graph to zoom and see the small datas.
    &amp;lt;dvt:graph&amp;gt;
    -Arun

  • Hide certain parts of the table

    Hi All,
    I have rtf tempalte with a table. I want part of the rows/ columns to invisible in the output. I tried using "No Border" option, but the lines still show up in PDF output. also, I found many threads with rtf vs pdf output but none of them ends with an answer. Why is there a difference. Any help or pointing any documentation would be appreciated.
    Thanks.

    I got it
    Thanks.

  • How to hide a field of the maintenance view?

    I want to show not all fields of my table in maintenance view. How to realize it?

    Hi Yichao,
    Chk these links
    https://help.sap.com/saphelp_nw04/helpdata/en/5a/0c889a4d5911d2a5fb0000e82deaaa/content.htm
    http://help.sap.com/saphelp_45b/helpdata/en/cf/21ec5d446011d189700000e8322d00/frameset.htm
    thanks and regards
    srikanth.p

  • Clearing the Sequence View Display

    We are using a LabView UI to the TestStand engine.
    When a test is completed the the UI Sequence View background colour changes from white to grey and the results of the test remain in the View, does anyone know how to clear the View?
    Regards
    Steve
    There are 10 types of people in the world that understand binary, those that do and those that don't.

    Steve,
    You could set the ExecutionView Manager's  Execution property  to NULL every time an execution ends. In this way the execution view would be 'cleared'.
    If you want to modify the LV Full Featured Operator Interface to handle the Application Manager's EndExecution callback follow the following steps.
    1.Use LabVIEW to  open TestStand\OperatorInterfaces\NI\FullFeatured\LabVIEW\TestExec.llb.
    2. Select Full OI - Configure Event Callbacks.vi.
    3. Open the block diagram and add anew callback to the reg event callback node.
    4. Connect the Application Manager branch to the event source ref input.
    5. Select EndExecution form the callback list.
    5. Pass the Execution View Manager Reference as the User Parameter.
    6. Create a new Callback VI and name it END EXE CBACK.
    7. Inside the callback VI set the IExecutionVIewManager Execution property to NULL.
    Hope it helps.
    If you have any question let me know.
    Antonio Lie.

  • How to return the month view format on IPhone to show text of events and not dots?

    The month view in my IPhone ICal is now filled with dots to let me know I have an event as opposed to the former view where I could see text at a glance and know what I had to do on certain days.  The month view of days with dots is now worthless to me unless i can change it back to see text.  Also, you have to scroll through to see all the hours in a day.  Is this really necessary?  Who has time to enter in so much activity on their daily calendar that is reqires scrolling through the hours?  Can I make the entire day appear on one screen if I'm in day view?
    Thanks for your help.

    You can see what is similar to the List view by tapping on the magnifying glass. The former Month view with a couple of lines ot text under it no longer exists.
    Feedback to Apple can be made at www.apple.com/feedback and click on the appropriate link.

  • Is there a way to organize shared folios in the content viewer app?

    I have quite the collection of folios that have been shared with me. My list has grown quite a bit and it's getting harder to find certain folios in the Content Viewer App on my iPad. The ordering seems to be somewhat random. Is there any way to organize the list of folios? Bonus Question: Any way to create folders and place certain folios inside of folders?
    Thanks!

    Use library filters.

  • Execution view not visible

    Hi,
    I am using the full IO example for labview in test stand examples. I haave made some modification to suit my application. When I run this main vi everything appears properly. the execution view is visible and shows the trace of the testing. When I launch this VI from another VI using the invoke node through the RUN VI method, the execution view and the report view are not visible.
    Where could be the error?
    Regards
    Gopal

    Hi Gopal,
    I ran your VI (I simply modifed the Open VI Reference Path to point to my unmodified Full OI:  C:\Program Files\National Instruments\TestStand 3.5\OperatorInterfaces\User\Full-Featured\LabVIEW\TestExec.llb\Full OI - Top-Level VI.vi) and the execution view appeared fine.  Please try this with an unmodified version of the OI.  Assuming you get the same result, you may want to compare the differences and/or make your changes incrementally from the original version.
    Here are the execution views after I launch the OI with your VI: 
    Message Edited by AEDavid on 05-10-2007 05:04 PM
    Cheers,
    David Goldberg
    National Instruments
    Software R&D
    Attachments:
    execution.JPG ‏88 KB
    executionafter.JPG ‏80 KB

  • Colum Configuration in the Team Viewer iview

    Hi Customizers/Developers,
    We have been running MSS for some time on our portal, and just recently an issue has been raised by our customers. In the upper, right corner in the Team Viewer iview there is an icon leading to a new window where one can add certain information in the Team Viewer column (I think the window/icon is called something like Column Configuration). One of the options here is TO_ATTEND, but we want to remove this option.
    Does anyone know where to change/custimize this?
    I tried to look in the IMG -> integration with other SAP components -> business packages/functional packages -> MSS -> Object and data provider -> Define Columns. But I couldn't figure out quite what to do.
    Have anyone else faced the same issue? What were your experiences?
    Help is highly appreciated!
    Many thanks!
    Regards,
    Stina.

    Stina,
    can you upload a screenshot
    Thanks
    Bala Duvvuri

  • Hide certain characteristic properties

    Hello,
    We have web reports which have 'Display Characteristic Properties' enabled in the templates so it displays on the context menu. When the user clicks on the 'Properties' of a characteristic, it displays ALL the attributes of that characteristic. However, we want to be able to hide certain attributes from the Properties selection, although keep them as an attribute of the characteristic. Eg, We have 0EMPLOYEE which has an attribute 0DATEBIRTH. But we do not want the users to be able to select this attribute from the Properties option and display it. Is it possible to restrict the attribute list somehow? Thanks, Linda

    Hi,
    I believe you need to limit the access by using authorizations. You need to make the attributes relevant for authorization and grant authorization to the users you want.
    Check this link:
    http://help.sap.com/saphelp_bw33/helpdata/en/6b/ebb3ac244f11d5b2e30050da4c74dc/content.htm
    Hope it helps,
    David.

  • Deactivate the WM execution view in MM01

    hi,
    how to deactivate the WM execution view and WM packaging view in material master  in MM01...i already checked material types in SPRO the above mentioned views are not  there....how to deactivate the above views?
    Thanks
    Muthuraman.D

    I hope you changed the Material type after you created the material. You can only put a deletion flag for the Warehouse and the storage type.
    If you want to hide the views for a particular user, then you can create a screen sequence and assign to those users.
    Step1: In OMT3B, create a screen sequence by copying from the existing one.
                 Then delete the WM1 and WM2 from the data screens.
    Step2: In OMT3E, Screen Sequence Control - Enter the screen sequence you created - assign the user.

Maybe you are looking for

  • How to retrieve data from this XML

    Hi I am getting below XML file and I need to get data from the file into table in a database ( SQL SERVER ). Please kindly help to shred and load the data into a table  <claimInvoice xmlns="http://www.XYZ.com">   <INum>INum1</INum>   <dueAmount xmlns

  • XML / XSLT :: String value replace

    Hello, I have XML configuration files that's look like this : <dynamical.configuration.notwork.AdapterConfiguration>   <name>adapter demo</name>   <tool__version>1.0</tool__version>   <module>cadence</module>   <basedir>fun</basedir>   <output__dir>o

  • FBL1N - Cheque information display required

    Hi Gurus, While displaying Vendor Line item display, i need to know the cheque information for payment made against an invoice. I currently do it by selecting the line item and clicking the icon for displaying chq info (cntrlshiftF7), and get the chq

  • Error 1051414

    Hi, I'm trying to migrate an Essbase application from a server with version 9.3.1 (not exterrnalize but with NTLM ldap and no SSL)to a new server on version 11.1.1 (externalize with MSAD and with SSL) and get this error. 1051414 Failed to set role fo

  • Array as method argument

    Is there anyway to pass an Array as argument without declare an array variable before? Example: public class MyClass public MyClass myMethod( HOW CAN I PASS AN ARRAY HERE !); public void myMethod(String[] myArray) // The method body ;