Hide coupled numeric value in Publisher
Hi everybody,
is there any possibility to hide a coupled numeric value (only one of the two) in Publisher?
For instance, I have coupled numeric value with 5g/10lb. I want to display on the metric value.
Cheers
Christian
Hi Christian,
I believe that it is not possible to achieve this requirement with current MDM Publisher.
Please consider filling a feature request.
Regards,
Hedda Cohen.
Similar Messages
-
Extracting numeric value of a char
Hi All,
I need to get the numeric value of the chars. Here is the code I am using:
TextField userNumber = new TextField("User Number:", "", 10, TextField.NUMERIC);
String forNumber = userNumber.getString();
char number2 = forNumber.charAt(1);
char number3 = forNumber.charAt(2);
char number10 = forNumber.charAt(9);
long counter = number10 * (number2 + number3);
The result I am getting is the product of the ASCII values instead of the numeric values.
I've been searching for the solution for a couple of days now but nothing had worked. Thanks for any help.volcanohere wrote:
I have no intention of learning every bit of code there is in Java.BTW, I doubt there is one person on this planet the knows every bit of code, including the SUN staff who created the language. I looked up those methods in the API. That is what it is there for. If you are incapable of doing the smallest bit of research then you won't succeed for very long. And that doesn't just apply to programming. -
Looking for help with javascript to autofill checkboxes based on a numeric value.
I have a numeric field that I would like to have 1 - checkbox
out of five autofilled based on a numeric value.
For instance the numeric value is TotalPoints
If the TotalPoints Value is >10 autofill this checkbox
If the TotalPoints Value is 10 - 19 autofill this checkbox
If the TotalPoints Value is 20 - 49 autofill this checkbox
If the TotalPoints Value is 50 - 69 autofill this checkbox
If the TotalPoints Value is 70+ autofill this checkbox
Assistance in writing the correct script for this would be greatly appreciated.All the checkboxes have separate names.
Check box #1 is AssetClass.0 with the export value of 1
Check box #2 is AssetClass.1 with the export value of 2
Check box #3 is AssetClass.2 with the export value of 3
Check box #4 is AssetClass.3 with the export value of 4
Check box #5 is AssetClass.4 with the export value of 5
Score and StrategyUse the following calculation to determine your point score and indentify the appropriate strategy listed below.A. Add your points for questions 1 – 2.
B. Add your points for questions 3 – 12.
C. Subtract B from A. (Numeric Text Box) name is TotalPoints
Points Strategy Asset Class Mix (check boxes as named above)
0 – 10 Primarily Fixed Income: 80% Fixed Income; 20% Equity
10 – 19 Balanced Fixed Income-Oriented: 60% Fixed Income; 40% Equity
20 – 49 Balanced Equity-Oriented: 40% Fixed Income; 60% Equity
50 – 69 Primarily Equity: 20% Fixed Income; 80% Equity
70+ Equity: 95%; 5% Cash -
Popup Key LOV, NULL and "Invalid numeric value undefined for column"
Hello.
I've created an item based on database column of NUMBER type and set the following properties:
Display As = Popup Key LOV (Displays description, returns key value)
List of values definition=select 'display_value' d, 1 r from dual
Null display value=%
Null return value=
Display Null=Yes
When I select "%" in the LOV and try to apply changes to database I get error:
ORA-20001: Error in DML: p_rowid=1781, p_alt_rowid=N1, p_rowid2=, p_alt_rowid2=. ORA-20001: Invalid numeric value undefined for column N2
Error Unable to process row of table TTT.
If I set Display As = Select List, all works fine. But I need Popup Key LOV.
Could anybody help me?
I use Application Express 2.2.1.00.04Hi all,
I did my homework and solved this issue. First I would like to thank Patrick Wolf for the invaluable help he gives out on thread Re: Null value handling in LOVs The code presented here is just a minor edit to his code, but an essential one when dealing with Popup Key LOV items.
Here's what I did:
1. Create an Application Process.
Name: RemoveNulls
Sequence: 0
Point: On Submit: After Page Submission - Before Computations and Validations
Process Text:
BEGIN
FOR rItem IN
( SELECT ITEM_NAME
FROM APEX_APPLICATION_PAGE_ITEMS
WHERE APPLICATION_ID = TO_NUMBER(:APP_ID)
AND PAGE_ID IN (TO_NUMBER(:APP_PAGE_ID), 0)
AND LOV_DISPLAY_NULL = 'Yes'
AND LOV_DEFINITION IS NOT NULL
AND LOV_NULL_VALUE IS NULL
LOOP
IF (V(rItem.ITEM_NAME) = '%null' || '%' OR V(rItem.ITEM_NAME) = 'undefined')
THEN
Apex_Util.set_session_state(rItem.ITEM_NAME, NULL);
END IF;
END LOOP;
END;Error Message: #SQLERRM#Condition: None
2. You should be able to submit a Popup Key LOV with a NULL value now.
Once again, THANKS, Patrick! You rock! I'm seriously thinking of trying ApexLib now :)
Georger -
Get numerical values from 2D array of string
Hello!
I start by saying that I have a base knowledge of LabView. I'm using LabView 2011. I'm doing some communications test via Can-Bus protocol. As you can see in pictures of the block diagram and of the front panel that I've attached I'm using "Transmit Receive same Port" LabView example. It works very good but I would need to insert the 8 data bytes that I receive from the server in 8 different numerical variables so that I could use them to make some operations. How can I get numerical values from the 2D array of string that I attached?
Every example that you can provide is important!
Thank you very much!
Attachments:
1.jpg 69 KB
2.jpg 149 KBHi martiflix,
ehm: to unbundle data from a cluster I would use the function Unbundle(ByName)…
When you are new to LabVIEW you should take all the FREE online resources offered by NI on their website!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
BEx report hangs- selecting Alpha numeric values
I am working on the existing customer report
customer is the selection parameter for my report.
Issue is Customer has numerical and alpha numerical values.
If i give parameter rangs of value is numerical
01 - 500 query works fine
01-50cust1
50 cust1 - 195 cust2
query hangs.
Is their any way we can improve the query performance .
for searching alphanumerica values.
I have a workbook is built based on the query.
morethan 6 queries attached in the sheet 1....sheet2
each sheet has it is own query with values.
when I refresh and execute the workbook with the customer alphanumerica values it hangs.
Query is built based on the multiprovider.
Please help me onthisHello,
Try exporting in the 'fully formated grids and text'. It shouldl give you the 'member alias' used in the report.
Looks like if you export in the 'querry ready grids and text' it will show the 'member name' as in database although the report may have used the 'member alias'.
Regards -
How to hide dynamic parameters values in the URL with Reports 6i
Hi,
I want to know a way of hiding the parameters values when asking for a report through the web.
Now I'm using the Reports 3.0.5.8 with a Cartridge defined in the Oracle Web Application Server 3.0.1.0.1. When you ask for a report with the parameters DESTYPE = cache and DESFORMAT = pdf, it is fully generated and in the Address or Location box of the browser, you can see http://webserver/cache/report.pdf (where cache is the virtual directory defined in the OWAS in which the .pdfs are cached). So, users cant see the Url used to generate the report.
Im trying to upgrade this configuration to Reports 6i with Cgi in a web server. I generate reports with no problems. The problem I have is I cant find how to hide the parameters values as before. I mean, when I ask for a report, once its generated I can see http://webserver/cgi-bin/rwcgi60.exe?server=ServerName&report=report.rdf&userid=user/pass@connection&destype=cache&desformat=pdf&P1=value1&P2=value2 in the Location box. It allows user to ask for another report changing the values of the parameters. I use these parameters to execute some query written in the Data Model. For example, imagine that the P1 represents the company id, the user (that is supposed to see only data of its company) can change this id, ask for a new report and see data of another company.
Ive already tried to use the key mapping option, but its not useful to me because the parameters values are dynamic and its impossible to define different entries in the cgicmd.dat for each possible value. The option of loading the parameter form before running a report is not useful to me either, because there exists specific screens for this purpose.
Is there any solution?
Thank you.
Marma Bonfiglio.Hi Rakesh,
I am using BI 7.0
The last option I have is 'Hide' for 'Calculate single values as' .
I have the below options for 'Calculate single values as'
1. Normalise according to Next group level Resul.
2. Normalize according to Overall Result
3. Rank number
4.Olympic Rank Number
5.Maximum
6. Minimum
7.Counter for all detailed values
8.Counter for all detailed values that are non zero
9.Moving average
10.Moving average That is Not zero ,null or Error
11. Hide.
So could you please tell me where i can find 'suppress result' option for the keyfigure .
Many thanks -
SQL Query (updateable report) Region - Conditionally Hide and Set Values
SQL Query (updateable report) Region - Conditionally Hide and Set Values
Outline of requirement :-
Master / Detail page with Detail updated on same page using SQL Query (updateable report).
The detail region has the following source
SELECT item_id,
contract_id,
CASE WHEN hardware_id IS NOT NULL THEN
'HA'
WHEN backup_dev_id IS NOT NULL THEN
'BD'
WHEN hardware_os_id IS NOT NULL THEN
'HS'
END item_type,
hardware_id,
backup_dev_id,
hardware_os_id
FROM "#OWNER#".support_items
WHERE contract_id = :P26_CONTRACT_IDThe table support_items implements arced relationships and has the following columns
CREATE TABLE SUPPORT_ITEMS
ITEM_ID NUMBER NOT NULL,
CONTRACT_ID NUMBER NOT NULL,
HARDWARE_ID NUMBER,
BACKUP_DEV_ID NUMBER,
HARDWARE_OS_ID NUMBER
)A check type constaint on support_items ensures that only one of the fk's is present.
( hardware_id IS NOT NULL
AND backup_dev_id IS NULL
AND hardware_os_id IS NULL
OR ( hardware_id IS NULL
AND backup_dev_id IS NOT NULL
AND hardware_os_id IS NULL
OR ( hardware_id IS NULL
AND backup_dev_id IS NULL
AND hardware_os_id IS NOT NULL
) Hardware_Id is a FK to Hardware_Assets
Backup_dev_id is a FK to Backup_Devices
Hardware_os_id is a FK to Hardware_op_systems
The Tabular Form Element based on item_type column of SQL query is Displayed As Select List (based on LOV) referencing a named list of values which have the following properties
Display Value Return Value
Hardware Asset HA
Backup Device BD
Computer System HSThe Tabular Form Elements for the report attributes for hardware_id, backup_dev_id and hardware_os_id are all Displayed As Select List (Based on LOV).
What I want to do is only display the Select List for the FK depending on the value of the Select List on Item Type, e.g.
Item_Type is 'HA' then display Select List for hardware_id, do not display and set to NULL the Select Lists for backup_dev_id and hardware_os_id.
Item_Type is 'BB' then display Select List for backup_dev_id, do not display and set to NULL the Select Lists for hardware_id and hardware_os_id.
Item_Type is 'HS' then display Select List for hardware_os_id, do not display and set to NULL the Select Lists backup_dev_id and hardware_id.
There are properties on elements to conditionally display it but how do we reference the values of the SQL query Updateable region? they are not given a page item name?
Also on the Tabular For Elements there is an Edit tick against a report item - however when you go to the Column Attributes there is not a property with which you can control the Edit setting.
What's the best way of implementing this requirement in APEX 3.1?
Thanks.>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "user13515136".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I have a multi-row region that displays values and allows entries in a number of fields.Provide exact details of how this has been implemented. (An example on apex.oracle.com is always a good way to do this.)
I should like the fields to be conditional in that they do not permit entry, but still display, if certain conditions apply (e.g. older rows greyed out). Can this be done? Almost anything can be done, often in multiple ways. Which are appropriate may be dependent on a particular implementation, the skills available to implement it, and the effort you're willing to expend on it. Hence it's necessary to provide full details of what you've done so far... -
XDOFX if-then-else command testing of space and numeric value
Hi,
I have the following xdofx statement in a RTF template to display the value of one variable or another, depending on the value it contains: (the variable can contains both space or null or a numeric value).
<?xdofx: If Amount_1 = " then 'display amount_2' else If Amount_1 = 0 then 'display amount_2' else 'display Amount_1' end if?>
Result: When Amount_1 variable contains space or null value, then this If-then-else statement works. But When Amount_1 contains a number such as 0, it gives error "SBL-OMS-00203" (when it's checked against [=" ] in If condition). What's causing this? Is XDOFX being confused to test a variable that supposedly a character string (default by testing against [ =" ]), but find a number in the variable?
Any work around solution? (So [=" ] and [=0 ] can both be specified against a variable in an if-then-else statement in XDOFX).
Thanks a lot.
A.try
<?xdofx:if (Amount_1 =’’) then ‘display amount_2’ else if (Amount_1 =’0’) then ‘display amount_2’ else ‘display Amount_1’ end if?>or
<?xdofx:if (Amount_1 =’’) then ‘display amount_2’ else if (to_number(Amount_1) =0) then ‘display amount_2’ else ‘display Amount_1’ end if?> -
Creating a sound from an array of numeric values and playing it on speakers
How do I create take a sound I have stored as an array (or could be an arraylist if needed) of numeric values (at the moment as doubles) whiten my program and output it to speakers? I am using blueJ.
for example (0, 0.1, 0.4, 0.8, 0.9, 1, 0.8, 0.6, 0.3, 0.1, etc...) would be a very high frequency sin wave.
Edited by: alan2here on Feb 6, 2008 11:28 AMI stumbled upon this thread with a question somewhat related:
I've recorded a wave file from microphone. But what I would like is an array of numbers in the same way alan said. I'm also working on my own project involving signal processing (i'm trying to do speech recognition).
I can't really find a nice way of getting that array of numbers. I've tried to find out how wave file stores it's data, and directly read from the File object, but i figured there should be an easier way...
I used this code to read the sound:
* SimpleAudioRecorder.java
* This file is part of jsresources.org
* Copyright (c) 1999 - 2003 by Matthias Pfisterer
* All rights reserved.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
|<--- this code is formatted to fit into 80 columns --->|
import java.io.IOException;
import java.io.File;
import javax.sound.sampled.DataLine;
import javax.sound.sampled.TargetDataLine;
import javax.sound.sampled.AudioFormat;
import javax.sound.sampled.AudioSystem;
import javax.sound.sampled.AudioInputStream;
import javax.sound.sampled.LineUnavailableException;
import javax.sound.sampled.AudioFileFormat;
public class SimpleAudioRecorder
extends Thread
private TargetDataLine m_line;
private AudioFileFormat.Type m_targetType;
private AudioInputStream m_audioInputStream;
private File m_outputFile;
public SimpleAudioRecorder(TargetDataLine line,
AudioFileFormat.Type targetType,
File file)
m_line = line;
m_audioInputStream = new AudioInputStream(line);
m_targetType = targetType;
m_outputFile = file;
/** Starts the recording.
To accomplish this, (i) the line is started and (ii) the
thread is started.
public void start()
/* Starting the TargetDataLine. It tells the line that
we now want to read data from it. If this method
isn't called, we won't
be able to read data from the line at all.
m_line.start();
/* Starting the thread. This call results in the
method 'run()' (see below) being called. There, the
data is actually read from the line.
super.start();
/** Stops the recording.
Note that stopping the thread explicitely is not necessary. Once
no more data can be read from the TargetDataLine, no more data
be read from our AudioInputStream. And if there is no more
data from the AudioInputStream, the method 'AudioSystem.write()'
(called in 'run()' returns. Returning from 'AudioSystem.write()'
is followed by returning from 'run()', and thus, the thread
is terminated automatically.
It's not a good idea to call this method just 'stop()'
because stop() is a (deprecated) method of the class 'Thread'.
And we don't want to override this method.
public void stopRecording()
m_line.stop();
m_line.close();
/** Main working method.
You may be surprised that here, just 'AudioSystem.write()' is
called. But internally, it works like this: AudioSystem.write()
contains a loop that is trying to read from the passed
AudioInputStream. Since we have a special AudioInputStream
that gets its data from a TargetDataLine, reading from the
AudioInputStream leads to reading from the TargetDataLine. The
data read this way is then written to the passed File. Before
writing of audio data starts, a header is written according
to the desired audio file type. Reading continues untill no
more data can be read from the AudioInputStream. In our case,
this happens if no more data can be read from the TargetDataLine.
This, in turn, happens if the TargetDataLine is stopped or closed
(which implies stopping). (Also see the comment above.) Then,
the file is closed and 'AudioSystem.write()' returns.
public void run()
try
AudioSystem.write(
m_audioInputStream,
m_targetType,
m_outputFile);
catch (IOException e)
e.printStackTrace();
public static void main(String[] args)
if (args.length != 1 || args[0].equals("-h"))
printUsageAndExit();
/* We have made shure that there is only one command line
argument. This is taken as the filename of the soundfile
to store to.
String strFilename = args[0];
File outputFile = new File(strFilename);
/* For simplicity, the audio data format used for recording
is hardcoded here. We use PCM 44.1 kHz, 16 bit signed,
stereo.
AudioFormat audioFormat = new AudioFormat(
AudioFormat.Encoding.PCM_SIGNED,
44100.0F, 16, 2, 4, 44100.0F, false);
/* Now, we are trying to get a TargetDataLine. The
TargetDataLine is used later to read audio data from it.
If requesting the line was successful, we are opening
it (important!).
DataLine.Info info = new DataLine.Info(TargetDataLine.class, audioFormat);
TargetDataLine targetDataLine = null;
try
targetDataLine = (TargetDataLine) AudioSystem.getLine(info);
targetDataLine.open(audioFormat);
catch (LineUnavailableException e)
out("unable to get a recording line");
e.printStackTrace();
System.exit(1);
/* Again for simplicity, we've hardcoded the audio file
type, too.
AudioFileFormat.Type targetType = AudioFileFormat.Type.WAVE;
/* Now, we are creating an SimpleAudioRecorder object. It
contains the logic of starting and stopping the
recording, reading audio data from the TargetDataLine
and writing the data to a file.
SimpleAudioRecorder recorder = new SimpleAudioRecorder(
targetDataLine,
targetType,
outputFile);
/* We are waiting for the user to press ENTER to
start the recording. (You might find it
inconvenient if recording starts immediately.)
out("Press ENTER to start the recording.");
try
System.in.read();
catch (IOException e)
e.printStackTrace();
/* Here, the recording is actually started.
recorder.start();
out("Recording...");
/* And now, we are waiting again for the user to press ENTER,
this time to signal that the recording should be stopped.
out("Press ENTER to stop the recording.");
try
System.in.read();
catch (IOException e)
e.printStackTrace();
/* Here, the recording is actually stopped.
recorder.stopRecording();
out("Recording stopped.");
private static void printUsageAndExit()
out("SimpleAudioRecorder: usage:");
out("\tjava SimpleAudioRecorder -h");
out("\tjava SimpleAudioRecorder <audiofile>");
System.exit(0);
private static void out(String strMessage)
System.out.println(strMessage);
}Daniel -
How do I get my XML numeric values to show up when loaded into flash?
Hi there,
I've created an AS2 3D carousel It loads text values in the "content" section of the code below - including numbers and special characters into the .swf but...
What I can't figure out, is how to get it so that the "Tooltip" loads the text into the movieclip, but can also have numeric and special characters in it.
For example, I need the title of one of the icons on this carousel to be "3D Images," but only the "D Images" shows up from the XML text for the tooltip. The content when a user clicks on the icon can include numbers, just not the titles for some reason.
http://iongeo.com/collaboration_test_dev/video_arctic_imaging.html
I think it has something to do with the way that my text is loaded from the xml document specifically for the tooltip and tipText for the movie clip. Can numeric values be loaded into a movie clip in AS2? PLEASE HELP!
import mx.utils.Delegate;
import mx.transitions.Tween;
import mx.transitions.easing.*;
var numOfItems:Number;
var radiusX:Number = 300;
var radiusY:Number = 75;
var centerX:Number = Stage.width / 2;
var centerY:Number = Stage.height / 2;
var speed:Number = 0.05;
var perspective:Number = 130;
var home:MovieClip = this;
theText._alpha = 0;
theHeader._alpha = 0;
var tooltip:MovieClip = this.attachMovie("tooltip","tooltip",10000);
tooltip._alpha = 0;
var xml:XML = new XML();
xml.ignoreWhite = true;
xml.onLoad = function()
var nodes = this.firstChild.childNodes;
numOfItems = nodes.length;
for(var i=0;i<numOfItems;i++)
var t = home.attachMovie("item","item"+i,i+1);
t.angle = i * ((Math.PI*2)/numOfItems);
t.onEnterFrame = mover;
t.toolText = nodes[i].attributes.tooltip;
t.content = nodes[i].attributes.content;
t.header = nodes[i].attributes.header;
t.icon.inner.loadMovie(nodes[i].attributes.image);
t.r.inner.loadMovie(nodes[i].attributes.image);
t.icon.onRollOver = over;
t.icon.onRollOut = out;
t.icon.onRelease = released;
function over()
//BONUS Section
home.tooltip.tipText.text = this._parent.toolText;
home.tooltip._x = this._parent._x;
home.tooltip._y = this._parent._y - this._parent._height/2;
home.tooltip.onEnterFrame = Delegate.create(this,moveTip);
home.tooltip._alpha = 100;
function out()
delete home.tooltip.onEnterFrame;
home.tooltip._alpha = 0;
function released()
//BONUS Section
home.tooltip._alpha = 100;
for(var i=0;i<numOfItems;i++)
var t:MovieClip = home["item"+i];
t.xPos = t._x;
t.yPos = t._y;
t.theScale = t._xscale;
delete t.icon.onRollOver;
delete t.icon.onRollOut;
delete t.icon.onRelease;
delete t.onEnterFrame;
if(t != this._parent)
var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,t._xscale,0,1,true);
var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,t._yscale,0,1,true);
var tw3:Tween = new Tween(t,"_alpha",Strong.easeOut,100,0,1,true);
else
var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,t._xscale,100,1,true);
var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,t._yscale,100,1,true);
var tw3:Tween = new Tween(t,"_x",Strong.easeOut,t._x,150,1,true);
var tw4:Tween = new Tween(t,"_y",Strong.easeOut,t._y,250,1,true);
var tw5:Tween = new Tween(theText,"_alpha",Strong.easeOut,0,100,1,true);
var tw5:Tween = new Tween(theHeader,"_alpha",Strong.easeOut,0,100,1,true);
theText.text = t.content;
theHeader.header = t.header;
var s:Object = this;
tw.onMotionStopped = function()
s.onRelease = unReleased;
function unReleased()
//BONUS Section
var sou:Sound = new Sound();
sou.attachSound("sdown");
sou.start();
delete this.onRelease;
var tw:Tween = new Tween(theText,"_alpha",Strong.easeOut,100,0,0.5,true);
var tw:Tween = new Tween(theHeader,"_alpha",Strong.easeOut,100,0,0.5,true);
for(var i=0;i<numOfItems;i++)
var t:MovieClip = home["item"+i];
if(t != this._parent)
var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,0,t.theScale,1,true);
var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,0,t.theScale,1,true);
var tw3:Tween = new Tween(t,"_alpha",Strong.easeOut,0,100,1,true);
else
var tw:Tween = new Tween(t,"_xscale",Strong.easeOut,100,t.theScale,1,true);
var tw2:Tween = new Tween(t,"_yscale",Strong.easeOut,100,t.theScale,1,true);
var tw3:Tween = new Tween(t,"_x",Strong.easeOut,t._x,t.xPos,1,true);
var tw4:Tween = new Tween(t,"_y",Strong.easeOut,t._y,t.yPos,1,true);
tw.onMotionStopped = function()
for(var i=0;i<numOfItems;i++)
var t:MovieClip = home["item"+i];
t.icon.onRollOver = Delegate.create(t.icon,over);
t.icon.onRollOut = Delegate.create(t.icon,out);
t.icon.onRelease = Delegate.create(t.icon,released);
t.onEnterFrame = mover;
function moveTip()
home.tooltip._x = this._parent._x;
home.tooltip._y = this._parent._y - this._parent._height/2;
xml.load("icons.xml");
function mover()
this._x = Math.cos(this.angle) * radiusX + centerX;
this._y = Math.sin(this.angle) * radiusY + centerY;
var s = (this._y - perspective) /(centerY+radiusY-perspective);
this._xscale = this._yscale = s*100;
this.angle += this._parent.speed;
this.swapDepths(Math.round(this._xscale) + 100);
this.onMouseMove = function()
speed = (this._xmouse-centerX)/8000;Kglad, you are my HERO!
Thanks so much for your reply, I did not know about the embed options within flash...
Mike -
How to represent a -1 numeric value with text?
Hi All,
Question: How do I get the value of negative one (-1) in a numeric column to display as "all"?
Background: For our lottery players, they are able to opt in to various automated alerts. One column is an integer value representing one of five different thresholds for sending an alert: 10,000, 50,000, 100,000, 500,000, and -1. The -1 value
actually represents all of the other 4 values, or simply "all thresholds," meaning "send me an alert at every one of these thresholds."
What is the best way to represent the -1 value in the cube? A user won't understand that -1 is equivalent to "all choices". I could change the view so that the column is a string instead of an integer, but I assume this is going to
affect the cube in a negative way, such as unexpected sorting, etc.
I asked our resident SSAS guy if a numeric value could be displayed (not read) as "all values" while actually storing the -1 value, but all he could suggest was changing the data type and using a case statement to replace -1 with "all values."
This does not seem like a fix to me.
Is there a way to make SSAS display a negative one value as "all choices" without changing the data type of the source column itself?
Thanks,
Eric BNormally you would have a lookup on the number and a text value for the result displayed to users in the cube.
KeyValue
DisplayValue
10000
$10,000
50000
$50,000
100000
$100,000
500000
$500,000
-1
All Values -
Function module to convert character value of month into numeric value?
Hi Experts,
I need to convert a character value of a month in three alphabets to its numeric value.
e.g. 'jun' should be converted into '06' and 'jan' into '01' using a function module.Can anybody please provide me a similar function module?
TIA
Abhishektry this code:
DATA: text(20) TYPE c,
date TYPE sy-datum.
text = '06. Jul 06'.
TRANSLATE text TO UPPER CASE.
TRANSLATE text USING '. '.
CONDENSE text NO-GAPS.
CALL FUNCTION 'CONVERSION_EXIT_SDATE_INPUT'
EXPORTING
input = text
IMPORTING
output = date.
WRITE date USING EDIT MASK '__.__.____'.
Regards,
Dara. -
Error message - BSEG-WRBTR enter a numeric value
Hi,
I am having a problem with loading data using a abap program that calls RFBIBL00 program and the fb01 Transaction. The process is that the user enters the data in a excel sheet, saves as a tab deliminted txt file. The abap program reads the txt file, does some processing and submits the RFBIBL00 program with the FB01 code. When I check in SM35, it shows on the "incorrect " tab. When you display the log for the process, It is displaying "Formatting error in the field BSEG-WRBTR; see next message" and "Enter a numeric value". I am not sure where to start looking to try to correct this problem. I am tracing the abap program that submits the RFBIBL00 process and I am not finding where this is occuring. I am new to the ABAP world and I am having a hard time figuring this out. Can someone please let me know if I am proceeding in the right direction or if there is another way of solving this. I am not sure what program is generating the above error messages. If there is more information that is needed, please let me know and I will try to get it for you.
thanks in advance for the help on thisHi,
There may be two possiblities for this issue.
1. Incorrect data passed to the field BSEG-WRBTR
2. Check the Decemial Notation(Menu Path->System->status->Own profile and Defaults Tab). If it is diffrent with the entered amount format, then it will trigger error.
YOu can run the Bach in the fouground by choosing fouground radio button option in the Pop up.
Thanks,
Ramakrishna -
Assigning a Numeric Value in a Cell Based on Text in Another Cell
In advance, thanks for your assistance. I'm trying, in vain, to assign a numeric value in a cell based on text (from a dropdown menu) in another cell. For example, in cell A5 I have a dropdown list that includes the options "blue", "red", "white", and "gold." I want cell C15 to be 2 if A5="blue"; I want C15 to be 0 if A5="red"; I want C15 to be 2 if A5="white"; and, I want C15 to be 1 if A5="gold."
Tippet,
This is a job for LOOKUP.
The expression for the Result cell is: =LOOKUP(A2, Lookup :: A1:A4, Lookup :: B1:B4)
The aux. table contains the matches that you assign for the colors.
Regards,
Jerry
Maybe you are looking for
-
Hello Gurus, I like to send a text file from the aplication server to spool or send this file to a specific printer. What instructions do you know? Thanks. Joseph.
-
In Pages, is there a way to have both portrait and landscape pages within the same document?
Question: In Pages, is there a way to change the orientation within the same document so that one page is portrait and the next page is landscape, for example?
-
Which carrier is available for GUAM to use for the iPad 2?
I wanted to know which carrier is best for me to use on Guam for the iPad 2?
-
Navigating does not initialize BindingContainer
I have 6-step process. The last step is a review (call it P6) and does overall validation on page load (implemented in PagePhaseListener after prepareModel phase). If it finds some errors, I want to forward to specific step and display it. If there a
-
Essbase 11.1.1.1.3 - Run as a Service
Hi, Just installed Essbase and want to run it as a service but it doesn't show up in the Services? I configured it already with user info etc.. and it was running. I shut it down and now want to just start it as a service. Is there a way to do that?