Hide row in information windows FOI

Hy,
i have a problem.
An information of my dynamic jdbc_query is useful for calculating advanced style to use, but i don't want to display this value on the information window when i click on the drew area.
How can i solve my problem ?
Thank you in advanced.
Best Regards.

Hi,
I'm a bit confused with your description, If you encounter any problem with Windows 7 using experience, it would be better to provide an example or Screenshoot for your problem.
Thanks for your understanding!
Roger Lu
TechNet Community Support

Similar Messages

  • Information windows hide themselves

    Why is it that the Windows 7 version of windows hides information windows and frequently other types of windows from view behind other windows. Often no notice of the window is even present in the taskbar and therefore can cause the user to believe the computer
    is locked up when its merely waiting for user input. If the most recent window open were to be pushed to the foreground always, it would eliminate the need to when something is not working to minimize all windows in case there's a message lurking that can't
    be seen. I find this quirk of 7 intensely annoying at best. 
    Whizzerd

    Hi,
    I'm a bit confused with your description, If you encounter any problem with Windows 7 using experience, it would be better to provide an example or Screenshoot for your problem.
    Thanks for your understanding!
    Roger Lu
    TechNet Community Support

  • How to hide a drive in Windows 7, Service Pack 1

    Could someone please tell me how to hide a partitioned drive (example my drive E:/) so that my kids cannot access it on their separate, non administrative account?

    How to hide a partition in Windows?
    Right-Click on My Computer [Computer in Windows Vista and Windows 7]
    Click on Manage
    From the list of options Click on Disk Management that will be located in the left-bottom section
    All your hard disk and its partitions will be show in the right hand side
    Right-Click on the partition that you want to hide and select "Change Drive Letters and Path"
    Click on "Remove" and click "Yes"
    Your drive will now be hidden in my computer
    To unhide the drive :
    Go to Disk Management Right-Click on the hidden partition [there will not be a drive letter on the hidden drive] again select "Change Drive Letters and Path"
    Click on add and select an appropriate drive letter.
    Click Ok
    Now the drive is unhided.
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • In numbers, can i hide rows of data in a chart and still have that data show up in my graph?

    In numbers, can i hide rows of data in a chart and still have that data show up in my graph?

    yes.
    To hide rows (or columns), select the rows (or columns), then right click in the row (or column) tab to expose the contextual menu.  Select the menu item "Hide ..."

  • How do you get to the "Multiple Item Information" window so I can click "Part of a compilation:?

    How do you get to the "Multiple Item Information" window so I can click "Part of a compilation"?  When I transfer a CD to iTunes, and the CD has ten tracks, it loads as ten different albums.  Also, once this happens, do I have to delete the album and start over or is there a way to merge the albums in iTunes?  Using iTunes 10.04.08.

    And you've made me remember that using the compilation flag may only work in iTunes if you go into the Songs view, then use View > Column Browser > Show Column Browser and then View > Column Browser > Group Compilations to make sure this line is ticked.
    It is also best if View > Column Browser > Use Album Artists is also ticked.
    tt2

  • Changing "file type" in Link Information Window (CS3)

    Hola,
    I am having a problem in Indesign (CS3), and I was wondering if anyone here might be able to help.
    I'm a student updating an older .INDD file for a 47 page book. The pages were all updated as .AI files, but for some reason
    3 of the pages in our InDesign document were assigned a .PDF "file type" in the Link Information window.  When I try and "Relink" to the updated .AI files,
    the program won't link to the .AI file. It will properly re-link to a .PDF version of the file.
    Is there a way to reset that "file type" in the Links Window from .PDF to .AI?
    Ultimately I can use .PDF versions for this, but I'd prefer to have them all .AI files.
    That would be cleaner and easier for the next students down the road who are going
    to inheriet this project.  It seems like this should be an easy thing to do, but I can't figure it out...
    Thank you very much for any information you can provide.  
    ¡Muchas gracias!
    Javier

    Hola,
    Thank you for the quick reply!  I now suspect that I didn't correctly identify the problem.
    In the Links Panel for 44 of the 47 pages, they read pathname/*.AI, so no problem there (although the file type is also .PDF in the link window for those 44 pages that can link to the .AI).
    For three of the pages though, when I try and link them to pathname/*.AI, I get an error message in the document that indicates that "this is an Adobe Ilustrator file that was saved without PDF content".  When I relink those three to pathname/*.pdf, they work.
    So I'm thinking at this point that the problem isn't Indesign, but with the original .AI files that I'm trying to link to. I also suspect that my original idea to change the "file type" in the Links Panel to ".AI" is incorrect, since it's a .PDF file type for all of the 47 pages in this document!
    ¡Muchas gracias!
    Javier

  • Hide row values for certain column in GRR2

    Hi Experts,
    Looking for some help in report painter. I need to hide row values for certain columns in report painter. The requirement is I have 5 columns in the report, the 5 th column is the sum of col 1 to 4 and in my row i have a formula setup to sum of values for each column, what i would like to do is for column 1 thru 4 i didnt want to display the total values in row total but i wanted to dispaly value for column 5 in row total. I have been trying my best with putting formula, but couldnt succeed.
    Could somebody let me know is there an way to get this addressed.
    Thanks in advance
    Best Regards,
    gj

    How was it achieved ? Did you use sections for the columns for which rows needed to be hidden?
    I have a smiliar issue of hiding certain rows for few columns.

  • 2x2 table. 4 empy cells. Can hide rows but not columns. grayed out. argh!

    Only one sheet with a single table with 4 cells.
    I don't see any merged cells.
    Is there any other attribute that prevents columns from being hidden?
    I realize that one cannot hide all the columns or all the rows.
    I was given a spreadsheet months ago with this problem.
    Couldn't figure it out so worked around it by creating a new one and copying over the data.
    Still have the original, so I have pruned it down to a 2x2 table that still has the problem!
    Sure would like to know what is going on.

    You can take a table down to a single visible cell, but no further.
    This worked for me to show only cell B2:
    Expand the 2 x 2 table using the handle at the lower right to include more than two rows and more than two columns.
    Click the header tab for column A and choose Hide Column.
    Click the header tab for Row 1 and choose Hide Row.
    Grab the handle and drag it up and to the left to collapse the table to a single visible cell.
    This was done with a new sheet after placing data in the top left block of four cells. YMMV, of course.
    Regards,
    Barry

  • Can't highlight and copy text from the Podcast Information window

    With previous versions of iTunes I was able to convert Podcasts to AIFF files in my music library and then copy the track notes and text from the information window pane in Podcasts. With iTunes 8, I can get the information windows to pop-up but the text is not highlightable. Any ideas how I can cut and paste the info? thanks.

    I think I finally figured out the copy paste podcast thing and I do not know why I did not think of this earlier.
    Instead of clicking on the "i" symbol to get the information about the podcast to come up in the window that you cannot copy and paste from, hit command i or File> Get Info. The window that opens is just like the one that opens when you get info from a track in your regular music library. You can copy and paste from this one, even if it is a Podcast.
    paul

  • Query in selecting row wise information

    Hello All,
    Could you please help me in getting the row wise information for the Financial Reporting Studion Report? I have a report where the row information will be Revenue and Expenses. but the revenue and expenses should only carry for specific cost centers. For example XXXXRevenue should carry revenue for GL Account XXXX.
    Iam not able to do this. Please help me.
    Thanks.

    Hi Geoff,
    You can use the ROW_NUMBER and CASE Functions to acheive this. Here with , i have give u a small idea with an ex:
    Qry :
    B.ItemCode,SUM(B.PO1)[PO1],SUM(B.POQty1)[POQty1],SUM(B.PO2)[PO2],SUM(B.POQty2)[POQty2] From
    select Itemcode
    CASE when Sno=1 Then DocNum End [PO1]
    CASE When Sno=1 Then Qty End [POQty1]
    CASE when Sno=2 Then DocNum End [PO2]
    CASE When Sno=2 Then Qty End [POQty2]
    From(
    Row_Number() Over (Order By Opor.Docnum) [Sno], Opor.DocNum,POr1.ItemCode,sum(POr1.Quantity)[Qty] from OPOR join Por1 on Opor.DocEntry=por1.DocEntry
    ItemCode='20002' group by oPor.DocNum,por1.ItemCode
    A where A.Sno<=2)B Group By B.ItemCode
    Result :-
    ItemCode  PO1         POQty1           PO2            POQty2
    20002       18            1.000000         19                10.000000
    Thanks,
    Karthikeyan.P

  • Hide row and cell by cell formatting

    Hello,
    I am new to both diadem and VBS and I am having difficulties in translating calculations between excel and diadem.  I know that diadem doesn't have the same cell by cell formatting that excel does but is there a way to either hide rows that do not meet a certain condition or a way to say use an equation of the form
      =IF(H5> 0,J5+M4,0), where H is the conditional column and M is the resultant column?
    Thank you

    Hello ccimac,
    You might want to look at the IIF function to help you solve that particular problem,
    Example:
    Call Calculate("Ch(""ResultNV"")=IIf( Ch(""Channel1"")>1,Ch(""Channel1""),NoValue)" )
    This will create a NEW data channel called ResultNV that checks (in this example) whether a channel called Channel1 is larger than 1 or not. If it is, the value will the the actual channel value, if the values are smaller than 1 the software will replace the values with a NoValue - which is DIAdem's way of saying that a "cell" contains invalid values.
    Does that work for your question? Feel free to ask if you have further questions,
         Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • Hide row in planning book using BADI /SAPAPO/ADVX USER_EXIT_MACRO

    Dear All,
       I would like to have your suggestion how to hide row in planning book using BADI USER_EXIT_MACRO
       the requirement is when I drill down the object by region, the first line will be "total" and the second and third line
       will be region like "north" and "south".
       I want to show only "total" line and hide region detail.
       Would it be possible to do this using the badi USER_EXIT_MACRO?
    Thank you in advance,
    Boonsom

    Hi,
    In the Interactive Planning, you see a Cap-like icon on the top-left...... click on it and choose the characteristic (say, region) and say ok. You will then be able to see the Region just on top of the planning table. When you load the data, by default, it will have "Total" as option, and with your wish, you can choose to see the data for a particular region (North, South etc).
    Regards,
    Guru Charan.

  • How to hide the report progress window

    hii all
    i am running a report using a run_product builtin from a form but i want to hide the report progress window
    how can i do that
    thanks

    Ayman,
    the only way to do this is to run teh Reports in asynchronous mode which will have it running as a background job.
    frank

  • How to hide rows when no value entered automatically

    is there a way in conditional formatting where i can hise a row of information when no value is entered against that row , simlar to a macro in excel?
    thanks fred 69

    Fred,
    Yes, you can use the Reorganize Panel to show only rows that meet certain criteria. I would think that you could find a way to use that feature to accomplish your goal.
    Jerry

  • How to hide rows if all values are Zero  (0) horizontally?

    Hi,
    I have got a requirement to hide rows from the results if all values are equal to zero horizontally.
    Example:
    Region   M1    M2   M3
    East     0      0    3
    West    10     20    0
    South   -5      0    5
    North    0      0    0In the above example only North Region row should be hidden from the results becasue all the measures values are zero.
    Can someone please let me know the logic to achieve this?
    Thank in advance.

    Hi Karthik,
    Your answer was spot on(you are awarded points) but not my question. My client uses some X erp, which removes all zero value records when he clicks to see results. He wanted the same thing for Answers (he does not want to add any filters). Is there anyway to achive that, like using javascript or something?
    Thanks in advance.

Maybe you are looking for