Hide the travel check box in MSS team view in SAPHCM

Hi All,
How to hide the Travel check box in the above diagram.client don't want the travel functionlaity.
Please help me out here.
Regards,
Kiran

As mentioned in the specified thread
You can enhance the Webdynpro component: HRESS_C_LEA_TEAM_CALENDAR
View :V_TEAM_CALENDAR
To remove the color in the calender enhance the method BIND_CALENDAR_DATA_NEW
delete the record from "wd_this->gt_new_cal_entries" where legend id = "TRAVEL"
To remove the legend color enhance the method PARSE_XML
delete the record from "wd_this->gt_new_legends" where legend id = "TRAVEL"
Or Deactivate the BADI implementation HRMSS_TEAMCALE_TRAVEL_IMPL in SPRO
Employee Self-Service (Web Dynpro ABAP) -> Service-Specific Settings ->Team Calendar ->BAdI: Team Calendar Enhancement with Additional Information
Regards,
Jyothi

Similar Messages

The "Delete" check box is not working in a table

I have created a Master-Multi Detailed groups page, I can "Add Row" to the Master table, which is saved to the DB okay, but I cannot Add rows to the DB in the detailed table, and I cannot Delete the records (by checking the delete check boxes and hitting "save"). Independent if these record are saved in the DB or not.
Any idea what might be happening
Is it related that I do not get the "Save" confirmation message when I add a new record and hit save for example? How do I get this confirmation message back?
Thanks in advance
Mohamed

Yes, that might well be related.
You probably performed an ADF drag and drop action in one of your pages, which causes the default ADF Phase listener to be added to the faces-config.xml. If you remove this <phase-listener> entry everything should work OK again.
Steven Davelaar,
JHeadstart team.

While creating a PO in ME21N the return check box is automatically ticked.

Hi SAP Gurus,
I am facing a problem while creating a PO.
Every time I am trying to create a PO in ME21N, the return check box at the Item level of the PO is automatically getting ticked.
The check box can't be unticked even in change mode of the PO.
So all of the PO's with different document types are getting created with the Return check box ticked.
Can you help me to uncheck the Return tab in the Item level.
Please advice if any configuration is required or the code has to be modified.
Thanks in adavance.
Regards
Subhasis

Hi,
Go to the Table T007A, where you find the tax codes.
Input & out put taxes are the tax types.
In FTXP T.code give the tax code and click on the
Input tax codes are used for purchase cycle and out put taxes are for sales cycle. I Hope you have given the sales related tax code. Thats why system is giving the error message.
In T007 Table give the proper input and get the details.
Regards,

Rules applying the green check to the dictionary check boxes on upper right while ordering a service.

Rules applying the green check to the dictionary check boxes on upper right while ordering a service.
I'm trying to find information in the manuals about when the green check is applied to the dictionary check boxes to the right of the service form during ordering moment. I have customers who want to know why the check is missing when they enter the data displaying for that dictionary.
Thanks.

Hi Nancy,
The expected behavior is that the box should be checked once there are no remaining mandatory fields in the particular dictionary. Once the user completes and then exits the last mandatory field, the box should be checked. Is this not the behavior you are seeing?

The spell check box is ticked in options , but still dosn't work , why?

I have just downloaded fire fox on to my new computer, and although the spell check box is ticked in the options menu , I can't get spell check to work, can anyone help me?
== This happened ==
Every time Firefox opened
== from it being downloaded

Not all locales come with a dictionary installed for licensing reasons.
If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions) and selected.
You can see which dictionary is selected if you right-click in a text area and open the ''Languages'' submenu.
Also make sure that [[X]"Check Spelling" in the right-click context menu has a tick.
You can also try to toggle the "Check Spelling" item off and on again.
See http://kb.mozillazine.org/Spell_checking and [[Using the spell checker]]
See also http://kb.mozillazine.org/Dictionaries
You can look here for more dictionaries: https://addons.mozilla.org/firefox/browse/type:3

Trying to select the Calendar check box in iCloud window and then it asks me If I want to merge I hit ok and the it tries to ad see spinning fan icon and then just quits and is then unchecked. Does Anyone have a solution to fix this?

Trying to select the Calendar check box in iCloud window and then it asks me If I want to merge I hit ok and the it tries to ad see spinning fan icon and then just quits and is then unchecked. Does Anyone have a solution to fix this? It works just fine on all other 5 Macs I have. I have tried to sign out and in and even restart the computer. I am running Yosemite on all 6 of my Macs.

Search the web or help doco about the Captivate feature called Return to Quiz. It will do what you are looking for here according to your description. There's even a Youtube video from a year or two back that shows how it works.

How can I hide the tool data box?

How can I hide the tool data box that reads out the loction in Photoshop CS6?
It appears when I move a layer or change the size.
It is very distracting and totally useless for me (I'm an artist - not an engineer).
I can't find a setting to remove that black box. I hope there is a way to make it go away...
Thanks!

It sounds like your talking about the transformation values.
In the photoshop preferences under Interface you can set Show Transformation Values to Never

MSS Team View evaluation path for non chief positions (s-s)

Hello,
We have a problem with display of employees under non chief manager - reporting managers (connection A002). In our organization we have line managers and under them team managers who are leading team of employees. Those managers want to see their employees under MSS Team View iView.
I have checked forum posts and try to create correct evaluation path but i didn't get results yet. I have created 2 evaluation paths:
Z_MANG (copy of SAP_MANG):
10 *     B 008      S
20 S    B 002      S
30 US A 208 P
Z_S-S (copy of MSSDIREC):
10 S A 002     S
20 S A 008     P
30 S A 008     US
I also included them into rules so:
Root rule (rule 1) - Z_MANG
Target rule (rule 3) - Z_S-S
I have also done customizing under Object and Data provider and if I choose standard evaluation paths (e.g. SAP_MANG and MSSDIREC), I get employees shown - if I give manager a hat (A012 connection).
Could you please help me with advice, where am I wrong? I think that first evaluation path (Z_MANG) is ok and it finds non chief manager, maybe is a problem with second one that don't show employees?
Thank you for answers in advance.
Best regards,
David

My first suggestion was either use Bottoms-up approach or top-down dont use both..like either use either of below
S A 002 Reports (line) or
S B 002 Is line supervisor
but figured u will still have depth issues..so therefore
you cld experiment like below..i understood your requirement, and i am suggesting this totally off-hand thats on top of my head..as i said experiement doing this way..
say you have four levels why dont you use different evalutaion path to link them between each level..
say 1st to 2nd (reports to A002)
      2nd to 3rd (subordinate to A005)
      3rd to 4th/4th to 3rd (Is line supervisor B 002 )etc
this way you will not have the depth issue as each one is diffeent Ev path..
...oops i can see people laughing at this solution..but well..i tried!

MSS Team View change Bizcard Text

Hello,
We are implementing MSS Team View on Portal. And want to change the Home No. text in the Bizcard displayed when the Manager hovers over the employee.
Any help would be highly Appreciated.
Please refer to the screen below:

Hi Rohit,
there is a customizing activity where you should be able to change the text.
Go to Personnel Management --> Manager Self-Service (Web Dynpro ABAP) --> Organizational Chart Visualization --> Configure Organizational Chart Visualization
If you don't have any customer specific entries, the standard customizing can be found under "Check standard organizational chart configuration"
Select the MSSBIZVIEW entry
Go to the structure MSS_EMP_HIER:
And then to the MSS_TMV_BIZ_NAV navigation field group (as you want to change communication settings here)
If you then open the navigation fields, you should be able to edit the text that is shown:
Hope this solves your issue and helps.
Regards,
Marc

Can MSS Team Viewer for HR Users to See All Org?

Hi MSS Expert:
Our company has modified R/3 MDT scenario that specially give HR users to display all org structure and run reports through PPMDT. We're now implmenting MSS 60.1, backend ESS 5.0, after configured the objects and data provider that's derived from MDT evalution path, we can not overwrite the team viewer that can give HR user to have full access to entire org structure view. Is MSS team viewer only limited to line manager who has chief position? Or can it be configured to adopt both line manager and special HR users? Any guidance will be greatly appreciated.
Helen

Hi Helen,
being chief is a pre-req for MSS..You can create custom function modules & evaluation paths to bring in different levels of employees in to the Team Viewer.. but cannot give access to a special user... one has to be a chief of an Org Unit to get access to MSS..
Regards,
Suresh Datti

Employee search in MSS Team view

Hi,
Our requirement is to add a new criteria (employee by cost center) to the search criteria drop down in MSS Team view.
I have done the following steps in Object and Data provider node in spro-
u2022     Define rules for object selection
u2022     Define object selection
u2022     Define organizational structure views
u2022     Group organizational structure views
The new criteria is now visible in the dropdown, but on selecting the dropdown value no fields for input of cost center are displayed. Are there any settings that need to be done to define the input fields? If yes, what are these settings and where do I do them?
TIA.

Hi Diana,
Now I see the problem. And I dont think it is possible.
I recoment you to look at class CL_HRWPC_SEARCH_VIA_SELID. This class used by MSS for employee search. You can see it in IMG Define object selection. Copy and try modify it or find ther class you can use. I hope will work without any modification in NWDS.
All I did was definition rules for object selection where I put my FM for object selection. I did not enter any values the searsh was in the FM.
Evgeny

Acrobat X: Option to hide the dotted line in between pages when viewing in 2 page view?

Acrobat X: Anyone know if there is an option to hide the dotted line in between pages when viewing in 2 page view? So that the 2 pages can look seemlessly joined, with no gap and no dotted line? This would be useful when viewing PDF magazines or books in which 2 pages join for a larger picture.

Create a Page 0 item which will be available on all pages.OMG yes I can use items in page 0 ! I should have think of that :/ Shame on me.
Application item values can be set from JavaScript using AJAX and an On-Demand Process.Yes I already tried ajax with ODP, my getappitem() function works but my setappitem() function won't assign value to application item, but it's not a problem now, I removed the ajax part and I will use page items :D
Thank you fac586.
Yann.

How to pass the check box values from one view to another view

Hi Experts,
I have a selection screen view which consists of check boxes.
WBS System status.
Release                      Completed                  Closed as 3 check boxes.
Note : The above ones are check boxes.
Based on the selection made by the user, those values needs to be passed to second view which retrieves the data and
displays the data accordingly.
At the same time if the user does not make any selection, then WBS System status should contain Released, Completed and Closed values and that needs to be sent to Second view.
Kindly advise.
Regards,
Chitrasen

hi ,
make a attribute of type WDY_BOOLEAN to achieve this functionality
u need to follow these steps :
1 in side ur component controller , under the ATTRIBUTES tab , make 3 attributes say attr1 , attr2 and attr3 of type WDY_BOOLEAN
2 create a context node , cn_check and 3 context attribute ca_check1 , ca_check2 and ca_check3 in ur first view for
release , complete and close check boxes
3 inside the DOINIT of ur 1st view , set the attributes attr1 , attr2 and attr3 to blank
wd_comp_controller->attr1 = ' '
wd_comp_controller->attr2 = ' '
wd_comp_controller->attr3 = ' '
4 inside the method , where u r validating , if the check boxes are checked or not , read the attributes ca_check1 , ca_check2 and
ca_check3
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
    DATA ls_cn_check TYPE wd_this->element_cn_check.
    DATA lv_ca_check1 LIKE ls_cn_check-ca_check1.
*   navigate from <CONTEXT> to <CN_CHECK> via lead selection
    lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
*   get element via lead selection
    lo_el_cn_check = lo_nd_cn_check->get_element( ).
*   get single attribute
    lo_el_cn_check->get_attribute(
      EXPORTING
        name = `CA_CHECK`
      IMPORTING
        value = lv_ca_check1 ).
IF lv_ca_check1 EQ 'X' .
wd_comp_controller->attr1 = ' X'
wd_comp_controller->attr2 = 'X '
wd_comp_controller->attr3 = ' X'

How to hide the warning Dialog box in illustrator?

I need to open the pdf file in 'illustrator cs3' through visual basic coding and then save it as eps. But if i open the pdf file in illustrator some times 'warning dialog box' opened due to the font missing. I need to hide that warning dialog box while opening. Kindly help me.
Thanks,
Prabudass

Thanks for your answer, Mark...
I found out that the actual JS-Script code has to be... :
app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;

How to get the "delete" check box back?

Hi Guys,
I just used the "Migrate to Interactive Report" feature. After doing so, the check box is gone that is used to indicate rows to delete. A copy of the region is marked as "disabled" and the check box is still there, but it's not in the newly created region. Without that check box, my page has no way to delete rows. How do I add the check box to the new Interactive Report region? I'd rather not re-create the page from scratch.
Thanks,
Kim
P.S. I'm using Apex 4.1 and Oracle 11g xe - all running on Windows 7.

How about something like this? Instead of a check box add a new column with a delete image, you can use something like delete.gif (#IMAGE_PREFIX#delete.gif). The downside is that will be deleting one at a time, but in my experience this may not be an issue.
Add a hidden item to hold the ID of the row your want to delete. We'll call it P1_ID.
The new column with the delete image will need to "branch" to a URL and use this code (ALL in one single line)
apex.confirm("Are you sure you want to delete?", {
request:"DELETE_ROW",
set:{"P1_ID":#ID#}
});Then add a page process that fires when the request is DELETE_ROW
Would probably look something like this:
delete from some_table where id = :P1_ID;
A similar technique can be used for checkboxes, but it's a little more advanced as you need to loop through the selections.
Oh and add the column to the IR you don't really need to select anything. Or better yet, you could re-use the ID column of the report if you have one as your delete column. The #ID# on the code above needs to be the name of your column. So if your column is EMPNO the above would be #EMPNO# instead of #ID#.
Hope this helps.
-Jorge

Hide the travel check box in MSS team view in SAPHCM

Similar Messages

Maybe you are looking for