Hiding Select options on a selction screen

hi,
How to Hide Select options on a selction screen
thnks.

hi,
eg:-
select-options: sel_mat for mard-matnr no-display.
select-options: sel_plnt for mard-werks.
in this the sel_plnt will appear and sel_mat will not be seen on the selction screen. there are many options avaliable with select-options..
Like
    [OBLIGATORY / NO-DISPLAY]
    [VISIBLE LENGTH vlen]
    [NO-EXTENSION]
    [NO INTERVALS]
    [MODIF ID modid] ... .
reward points if useful and mark answered if u got the answer

Similar Messages

Select option in user defined screen

Hi friends,
In my program i m in need of using select-options ( input in terms of range ) . i saw some thread . in that they have mentioned FM : COMPLEX_SELECTIONS_DIALOG and some have given call subscreen ***.
but i don't know how to use it. i have never used subscreen in my program..
so u please tell me how to get it.
Thanks and regards,
kani,.

Refer:
[http://www.saptechies.com/select-option-in-a-dynpro/]
[Complex_Selections_dialog in Module Pool Programming;
[How to put "selection options without intervals" on screen painter?;

Getting select options in module pool screen

hi experts,
can any one suggest me how to provide select options in module pool screen.
thank you,
regards
vijay

Hi,
Take two fields on screen first for low value and other for high value (say vbeln_low and vbeln_high) also design a button next to the high textbox for select-option button used to display popup.
Using these two input fields append a range (say r_vbeln for vbap-vbeln) for the field to be used (either in query or anywhere).
ranges : r_vbeln for vbap-vbeln.
IF NOT vbeln_high IS INITIAL.
    IF NOT vbeln_low LE vbeln_high.
      MESSAGE e899 WITH text-007. "high value is smaller than low value
    ENDIF.
ENDIF.
r_vbeln-sign = 'I'.
r_vbeln-low = vbeln_low.
IF vbeln_high IS INITIAL.
    r_vbeln-option = 'EQ'. "if user takes only a singlr value
ELSE.
    r_vbeln-option = 'BT'. "if user takes both low & high value
    r_vbeln-high = vbeln_high.
ENDIF.
APPEND r_vbeln. "append range
CLEAR r_vbeln.
On the button click call this FM to call a popup for select-options.
DATA : tab TYPE rstabfield.
tab-tablename = 'VBAP'.
tab-fieldname = 'VBELN'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
   EXPORTING
     title                   = text-002
     text                    = ' '
     signed                  = 'X'
*         lower_case              = ' '
*         no_interval_check       = ' '
*         just_display            = ' '
*         just_incl               = ' '
*         excluded_options        =
*         description             =
*         help_field              =
*         search_help             =
     tab_and_field           = tab
    TABLES
      range                   = r_vbeln
   EXCEPTIONS
     no_range_tab            = 1
     cancelled               = 2
     internal_error          = 3
     invalid_fieldname       = 4
     OTHERS                  = 5.
IF sy-subrc EQ 2.
    MESSAGE s899 WITH text-003. "no value selected
ELSEIF sy-subrc <> 0 AND sy-subrc <> 2.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
This whole code will append your range r_vbeln to be used in program.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

Select Option on Module Pool screen

How to display select options on Module Pool screen ?

Via the search functionality, you will find something like :
SELECTION-SCREEN BEGIN OF SCREEN 101 AS SUBSCREEN.
SELECT-OPTIONS: S_CARRID FOR SPFLI-CARRID,
S_CONNID FOR SPFLI-CONNID.
SELECTION-SCREEN END OF SCREEN 101.
and to use a CALL SELECTION-SCREEN xxxx in your module pool.
regards,
Hans

Select-options in user defined screen

hi all,
I designed a screen numbered 1000 and placed alv on it.
I also put an input box on the screen and i want to display selections like select-options .....
thanks in advance
Jose

Hi,
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_werks FOR marc-werks OBLIGATORY,      "Plant
                s_erdat FOR aufk-erdat OBLIGATORY,      "Order Date
                s_aufnr FOR aufk-aufnr,                 "Order Number
                s_qmdat FOR qmel-qmdat,                 "Job Card Date
                s_qmnum FOR qmel-qmnum,                 "Job Card Number
                s_herst FOR equi-herst,                "Vehicle Registration Number
                s_sernr FOR equi-sernr.                "Vehicle Serial Number
PARAMETERS:     p_ename LIKE pa0001-ename.              "Service Supervisor/Advisor\
SELECTION-SCREEN END OF BLOCK blk_1.

Select option in Dialog program screen

Hi friends,
do we have any way to get a select option displayed in dialog programming ?
or
create a screen field with the properties of a select option in dialog screen ?
or
any standard function module to support this scenario ?
Thanks and Regards
Sakthi.

Hi,
i don't know you checked it or not, but i am able to do it, i send the screen shot also to you check it..
it is possible,with some coding also check it once...
REPORT ZTEST_SCREEN                            .
DATA : BEGIN OF IT_DYNPFIELDS OCCURS 3.
        INCLUDE STRUCTURE DYNPREAD.
DATA : END OF IT_DYNPFIELDS.
DATA: TEST(10) TYPE C.
RANGES: R_UNAME FOR SY-UNAME.
DATA:     V_USERNAME LIKE SY-UNAME.
DATA : V_PROG LIKE D020S-PROG VALUE 'ZTEST_SCREEN',
       V_DNUM LIKE D020S-DNUM VALUE '0100'.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'TEST'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module GET_CURSOR_USERNAME INPUT
*       text
MODULE GET_CURSOR_USERNAME INPUT.
REFRESH IT_DYNPFIELDS.
CLEAR   IT_DYNPFIELDS.
MOVE 'V_USERNAME' TO IT_DYNPFIELDS-FIELDNAME.
APPEND IT_DYNPFIELDS.
CLEAR   IT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      DYNAME               = V_PROG
      DYNUMB               = V_DNUM
      TRANSLATE_TO_UPPER   = 'X'
    TABLES
      DYNPFIELDS           = IT_DYNPFIELDS
    EXCEPTIONS
      INVALID_ABAPWORKAREA = 1
      INVALID_DYNPROFIELD = 2
      INVALID_DYNPRONAME   = 3
      INVALID_DYNPRONUMMER = 4
      INVALID_REQUEST      = 5
      NO_FIELDDESCRIPTION = 6
      INVALID_PARAMETER    = 7
      UNDEFIND_ERROR       = 8
      DOUBLE_CONVERSION    = 9
      STEPL_NOT_FOUND      = 10
      OTHERS               = 11.
IF SY-SUBRC = 0.
    READ TABLE IT_DYNPFIELDS WITH KEY FIELDNAME = 'V_USERNAME'.
    IF SY-SUBRC = 0.
      V_USERNAME = IT_DYNPFIELDS-FIELDVALUE.
    ENDIF.
ENDIF.
PERFORM GET_MULTIPLE.
ENDMODULE.                 " GET_CURSOR_USERNAME INPUT
*&      Form GET_MULTIPLE
*       text
* --> p1        text
* <-- p2        text
FORM GET_MULTIPLE .
* Dynamically holding Field name
FIELD-SYMBOLS: <FST> TYPE STANDARD TABLE.
IF R_UNAME[] IS INITIAL.
    IF NOT V_USERNAME IS INITIAL.
      R_UNAME-SIGN = 'I'.
      R_UNAME-OPTION = 'EQ'.
      R_UNAME-LOW = V_USERNAME.
      APPEND R_UNAME.
      CLEAR R_UNAME.
    ENDIF.
ENDIF.
ASSIGN R_UNAME[] TO <FST>.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
    EXPORTING
      TITLE             = 'Select Multiple Value'(059)
      TEXT              = 'Finish Group'(058)
      SIGNED            = 'X'
      LOWER_CASE        = ' '
      NO_INTERVAL_CHECK = 'X'
      JUST_DISPLAY      = ' '
      JUST_INCL         = 'X'
    TABLES
      RANGE             = <FST>
    EXCEPTIONS
      NO_RANGE_TAB      = 1
      CANCELLED         = 2
      INTERNAL_ERROR    = 3
      OTHERS            = 4.
IF SY-SUBRC = 0.
    READ TABLE R_UNAME INDEX 1.
    IF SY-SUBRC = 0.
      V_USERNAME = R_UNAME-LOW.
    ENDIF.
ENDIF.
ENDFORM.                    " GET_MULTIPLE
Flow loogic....
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
PROCESS ON VALUE-REQUEST.
*- To capture the cursor and for f4
FIELD V_USERNAME      MODULE GET_CURSOR_USERNAME.
in screen i have one field v_username
for that field do this
<b>double click on field which you want to make it as select option, it will display the attributes screen, in that click on program attributes button , now go to poss. entries in the dropdown choose 1 show at selection.</b>
Regards
vijay

Values of select-options lost in tabbed screen when in batch mode

Hi,
I have a very strange problem. When I run the following program in online mode (with values given for s_time1-low, s_time1-high and p_time1 on the second tab), everything is fine and the values given for s_time1 and p_time1 are printed. However, if I run the program in background (batch mode), the values s_time1-low and s_time1-high are initial and this is what is printed out.
Does anyone have a clue what could be the reason for this behavior? Any help is much appreciated!
Best regards,
Michael.
Demo-Program:
REPORT zdemo.
SELECTION-SCREEN: BEGIN OF TABBED BLOCK maintab FOR 26 LINES,
TAB (20) button1 USER-COMMAND pushmain DEFAULT SCREEN 100,
TAB (20) button2 USER-COMMAND pushtime DEFAULT SCREEN 200,
END OF BLOCK maintab.
*********** MAIN SCREEN (100) ***********
SELECTION-SCREEN: BEGIN OF SCREEN 100 AS SUBSCREEN.
PARAMETERS:     p_test TYPE i DEFAULT 10000.
SELECTION-SCREEN: END OF SCREEN 100.
*********** TIMEFRAME SCREEN (200) ***********
SELECTION-SCREEN: BEGIN OF SCREEN 200 AS SUBSCREEN.
SELECT-OPTIONS:   s_time1 FOR sy-timlo NO-EXTENSION.
PARAMETERS:       p_time1 AS CHECKBOX DEFAULT ' '.
SELECTION-SCREEN: END OF SCREEN 200.
START-OF-SELECTION.
WRITE:/ 's_time1-low:', s_time1-low.
WRITE:/ 's_time1-high:', s_time1-high.
WRITE:/ 'p_time1:', p_time1.

Hi,
I played around with the code a little bit: When I load a variant containing data for both tab strips and I do not click on the second tabstrip and run the program then in online mode, se values for s_time1 are also missing. It seems that SELECT-OPTIONS are only initialized with values when the user activated the tab. Strange enough that this does not hold for normal PARAMETERS where the values are alway initialized.
Unfortunately, I did not find a solution for this problem yet.
Help is appreciated very much!
Regards,
Michael.

How to create select-options in my own screen?

Hi
I create my screen and i wish to place select-options on screen. how to do that?

There is no SAP standard way of creating select options on screen.However you can create your own select options by providing two fields on screen in which maximum and minimum values can be entered.
screen fields :
input1 : <minimum value>
input2 : <maximum value>
data :
range for <some field>
then you can fill a range with these values.For eg.
range-low = <low value input field>.
range-sign = 'I'.
range-option = 'BT'.
range-high = <high value input field>.
append range.
*Now write your select statement.
select * from <some table> where <field> in <range>

How to put "selection options without intervals" on screen painter?

Hello all,
       I need to put a field for pernr(personal number) on screen painter (module program) and user should be able to enter a list of pernr's to process. I know in report program I can do this by:
SELECT-OPTIONS: s_lpernr FOR pa001-pernr NO INTERVALS.
How can I get this work on sccreen painter in module programming? How can I add a field on screen painter with a range without intervals? Please let me know.
Thanks.
Mithun.

You can also do this using the function module COMPLEX_SELECTIONS_DIALOG.
REPORT ZTEST_SCREEN                            .
DATA : BEGIN OF IT_DYNPFIELDS OCCURS 3.
        INCLUDE STRUCTURE DYNPREAD.
DATA : END OF IT_DYNPFIELDS.
DATA: TEST(10) TYPE C.
RANGES: R_UNAME FOR SY-UNAME.
DATA:     V_USERNAME LIKE SY-UNAME.
DATA : V_PROG LIKE D020S-PROG VALUE 'ZTEST_SCREEN',
       V_DNUM LIKE D020S-DNUM VALUE '0100'.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'TEST'.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module GET_CURSOR_USERNAME INPUT
*       text
MODULE GET_CURSOR_USERNAME INPUT.
REFRESH IT_DYNPFIELDS.
CLEAR   IT_DYNPFIELDS.
MOVE 'V_USERNAME' TO IT_DYNPFIELDS-FIELDNAME.
APPEND IT_DYNPFIELDS.
CLEAR   IT_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      DYNAME               = V_PROG
      DYNUMB               = V_DNUM
      TRANSLATE_TO_UPPER   = 'X'
    TABLES
      DYNPFIELDS           = IT_DYNPFIELDS
    EXCEPTIONS
      INVALID_ABAPWORKAREA = 1
      INVALID_DYNPROFIELD = 2
      INVALID_DYNPRONAME   = 3
      INVALID_DYNPRONUMMER = 4
      INVALID_REQUEST      = 5
      NO_FIELDDESCRIPTION = 6
      INVALID_PARAMETER    = 7
      UNDEFIND_ERROR       = 8
      DOUBLE_CONVERSION    = 9
      STEPL_NOT_FOUND      = 10
      OTHERS               = 11.
IF SY-SUBRC EQ 0.
    READ TABLE IT_DYNPFIELDS WITH KEY FIELDNAME = 'V_USERNAME'.
    IF SY-SUBRC = 0.
      V_USERNAME = IT_DYNPFIELDS-FIELDVALUE.
    ENDIF.
ENDIF.
PERFORM GET_MULTIPLE.
ENDMODULE.                 " GET_CURSOR_USERNAME INPUT
*&      Form GET_MULTIPLE
*       text
* --> p1        text
* <-- p2        text
FORM GET_MULTIPLE .
* Dynamically holding Field name
FIELD-SYMBOLS: <FST> TYPE STANDARD TABLE.
IF R_UNAME[] IS INITIAL.
    IF NOT V_USERNAME IS INITIAL.
      R_UNAME-SIGN = 'I'.
      R_UNAME-OPTION = 'EQ'.
      R_UNAME-LOW = V_USERNAME.
      APPEND R_UNAME.
      CLEAR R_UNAME.
    ENDIF.
ENDIF.
ASSIGN R_UNAME[] TO <FST>.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
    EXPORTING
      TITLE             = 'Select Multiple Value'(059)
      TEXT              = 'Finish Group'(058)
      SIGNED            = 'X'
      LOWER_CASE        = ' '
      NO_INTERVAL_CHECK = 'X'
      JUST_DISPLAY      = ' '
      JUST_INCL         = 'X'
    TABLES
      RANGE             = <FST>
    EXCEPTIONS
      NO_RANGE_TAB      = 1
      CANCELLED         = 2
      INTERNAL_ERROR    = 3
      OTHERS            = 4.
IF SY-SUBRC EQ 0.
    READ TABLE R_UNAME INDEX 1.
    IF SY-SUBRC = 0.
      V_USERNAME = R_UNAME-LOW.
    ENDIF.
ENDIF.
ENDFORM.                    " GET_MULTIPLE

Display Select option in module pool screen

What are the Function modules used to display Select option type fields in a module pool screen?

hi,
You can use the SELECT-OPTIONS statement to place a group of fields on the screen that allows users
to enter complex selections. The selection may be a single value, or any form of interval
Selection ranges are stored in programs using an internal table.
The ABAP statement SELECT-OPTIONS <selname> FOR <field> declares an internal table called
<selname>, containing four fields - SIGN, OPTION, LOW, and HIGH. The fields LOW and HIGH have
the same type as the field <field>.
The SIGN field can take the value 'I' (for inclusive) or 'E' (for exclusive).
The OPTION field can contain relational operators (EQ, NE, LE, LT, GE, GT), pattern operators (CP,NP), and operators that allow you to enter intervals (BT, NB).
SELECTION-SCREEN BEGIN OF BLOCK conn WITH FRAME TITLE text-001.
PARAMETERS pa_car LIKE wa_sflight-carrid OBLIGATORY.
SELECT-OPTIONS: so_car FOR wa_sflight-carrid,
SELECTION-SCREEN END OF BLOCK conn.
Hope this helps, Do reward.

How to create select-options on module pool screen

Hi all
I want get a range of values from the user from the module pool screen.
Is there any element available on module pool screen like select options on the selection screen of reports.
reply me ASAS.
Thanks.

hi krishna
actually I want to display the details of PO numbers from 45000100 to 45000150. user will enter this range on the module pool screen just as we enter on the selection screen of report. My question is do we have a button like select-option on the module pool screen.
Plz . reply me ASAP.
Thanks.

EREC: Duplicate selection options on job search screen

Hello,
I am getting duplicate selection options for unregistered job search. Functional Area, contract type, country are being displayed two times. I looke dup search templates, but didnt find any duplicate values.
Help is much appreciated.

Hi Nicole,
thank you for pointing me in the right direction. I had more than one search template assigned in the search tempalte groups table. I removed that, which solved the problem.
Thanks Again

Passing multiple values to select-option low by submit at one go from zpro.

Hi all,
I have a requirement pass descrete multiple values form my z-program to to select-option low on selction screen of standard SAP program using SUBMIT statment at one go.At the same time select-option high will be empty.I will be thankful if anybody can help me in this regard.
Sandeep.

Hi Check this link...on submitting programs
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db9d7535c111d1829f0000e829fbfe/frameset.htm
here is the code . we are calling the same program....you can call any other program as well.
REPORT demo_program_submit_rep1.
DATA number TYPE i.
PARAMETERS      paramet(14) TYPE c.
SELECT-OPTIONS selecto FOR number.
The program DEMO_PROGRAM_SUBMIT_REP1 is called by the following program using various parameters:
REPORT demo_program_submit_sel_screen NO STANDARD PAGE HEADING.
DATA: int TYPE i,
      rspar TYPE TABLE OF rsparams,
      wa_rspar LIKE LINE OF rspar.
RANGES seltab FOR int.
WRITE: 'Select a Selection!',
SKIP.
FORMAT HOTSPOT COLOR 5 INVERSE ON.
WRITE: 'Selection 1',
     / 'Selection 2'.
AT LINE-SELECTION.
CASE sy-lilli.
    WHEN 4.
      seltab-sign = 'I'. seltab-option = 'BT'.
      seltab-low = 1.   seltab-high   = 5.
      APPEND seltab.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH paramet eq 'Selection 1'
                      WITH selecto IN seltab
                      WITH selecto ne 3
                      AND RETURN.
    WHEN 5.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'E'. wa_rspar-option = 'BT'.
      wa_rspar-low = 14. wa_rspar-high = 17.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'PARAMET'. wa_rspar-kind = 'P'.
      wa_rspar-low = 'Selection 2'.
      APPEND wa_rspar TO rspar.
      wa_rspar-selname = 'SELECTO'. wa_rspar-kind = 'S'.
      wa_rspar-sign = 'I'. wa_rspar-option = 'GT'.
      wa_rspar-low = 10.
      APPEND wa_rspar TO rspar.
      SUBMIT demo_program_submit_rep1 VIA SELECTION-SCREEN
                      WITH SELECTION-TABLE rspar
                      AND RETURN.
ENDCASE.

SELECT-OPTIONS in table maintenance generator screen

Hi
Is it possible to create SELECT-OPTIONS in table maintenance screen?
My requirement is to allow the user to enter single Company code and Range of G/L Accounts in the Table Maintenance input screen. Please let me know.
Thanks
Abdul Hakim

Hello Tamas,
As a matter of fact we can add a custom selection-screen to the TMG screen & without manually modifying the TMG
You can do so by using the [Event AA: Instead of the Standard Data Read Routine|http://help.sap.com/saphelp_nw04s/helpdata/en/91/ca9f56a9d111d1a5690000e82deaaa/content.htm].
Please check the code snippet:
DATA: gv_fldate TYPE s_date.
* User-defined selection-screen
SELECTION-SCREEN: BEGIN OF SCREEN 9000.
PARAMETERS:     p_carrid TYPE s_carr_id OBLIGATORY.
SELECT-OPTIONS: s_fldate FOR gv_fldate OBLIGATORY.
SELECTION-SCREEN: END OF SCREEN 9000.
*&      Form sub_yvsflight_event_aa
*       text
FORM sub_yvsflight_event_aa.
DATA: ls_temp_data TYPE yvsflight,
        lt_temp_data TYPE STANDARD TABLE OF yvsflight.
* Call the user-defined selection-screen
CALL SELECTION-SCREEN 9000 STARTING AT 25 10.
* Populate the int. table TOTAL
PERFORM get_data_yvsflight.
* Delete the records which are not required
LOOP AT total.
    ls_temp_data = <vim_total_struc>. "Copy to local struct.
    IF ls_temp_data-carrid NE p_carrid OR
       ls_temp_data-fldate NOT IN s_fldate.
      DELETE total. "Remove the record from the TOTAL
    ENDIF.
ENDLOOP.
ENDFORM.                    "sub_yvsflight_event_aa
BR,
Suhas

Hiding Select options on a selction screen

Similar Messages

Maybe you are looking for