Hiding selected staves in a "section" of a composition

I am pretty familiar with the Score Editor in Logic, but I would like to hide a staff in a certain section of a composition and can't figure out how to do it. Say I have a piece with piano and vocals on separate tracks and there is a piano interlude in the middle. If I don't want to view the blank vocal part above the piano, during the interlude, in the printed score, what do I do? I understand "Score Sets," but they don't seem to allow you to hide a staff/instrument/track for a determined amount of time. Thank you for any assistance.

Hi , you could split the region(s) in the arrange and mute the part(s) you don't wish to be visible.
Have a nice day!

Similar Messages

Hiding selection-screen

Hi All,
I have a requirment to hide a selection-screen block based on the radio button option displayed in selection-screen.
I am able to do this, but in this block there are some mandatory fields to be filled .
So every time when i change the radio button , i have to fill the mandatory fields in order to hide it .
Pls let me know how to hide a block without entering the mandatory fields in it .
Thanks & Regards,
Rajasekhar.

Hi Rajasekhar,
Either remove the 'obligatory' keyword from the syntax when you declare the mandatory fields, rather, check in your program, whether these fields are filled for suitable radio-button corresponding to that block, and if these are empty, give error message 'Fill in required fields'. Thus while hiding the block for a different radio-button You do not require to fill these fields.
Else, just code some default values in the program to these mandatory fields, so that You need not enter the values to these fields before hiding the block.
Regards,
Birendra

Using Select Expert Inserts Blank Section

I'm using Crystal Reports XI Developer Edition and it recently started to display some strange behavior. Every time I use the Select Expert to add a parameter, Crystal adds in an empty ghost section. I refer to it as a ghost section because you can see it in preview mode as an unlabeled, blank section between the report footer and the page footer, but when I go into design view it's not there. How can I make this section not appear?

Hello Mary,
I can't explain why it would do that but here are some things to try;
1) Ensure you are patched up with the latest service pack, SP4
2) Try lowering the screen resolution
3) Try lowering the hardware acceleration
4) If you are using dual monitors only use Crystal Reports on the primary
5) Have someone else try logging onto your machine and see if they receove the same behaviour
Some questions if the above does not resolve the issue;
1) Is this happening on other machines?
2) What Operating System is CR installed on
3) Could you please detail the exact workflowif the following statement is incorrect > go into the Select Expert, select a field to filter on, select a parameter from the drop down list of values.
4) What happens if you manually create the record selection formula where field = parameter?
5) Does this happen with any field type or is limited to a specific type?

Hiding selective fields in a report based on other field in the same report

Hello!
I am trying to create a report of the inventory items. 2 of the fields in the report would be the sale price of the item, and one of the properties (prop1) from the Item Master Property tab.
Depending on whether Prop1 is Y/N, the price of the item should be displayed.
If Prop1 = N, Price is displayed
If Prop1 = Y, Price gets hidden
Using queries, is it possible to create this kind of reports?
I am using SAP 2005b PL 42.
Thanks for any suggestions....
Prajwal

Hello Prajwal,
It is definely possible !!
If you have already created your query pls paste the same here so that I can help you otherwise. I will give you a general guidelines and you can take it from there..
Using the CASE Statement inside your SELECT you can achieve this.
SELECT T1.ItemCode AS 'Item No.', T1.ItemName AS 'Item Description',
CASE WHEN T1.QryGroup1 = 'N' THEN T0.Price ELSE 0 END 'List Price'
FROM [dbo].[ITM1] T0 INNER JOIN [dbo].[OITM] T1 ON T1.ItemCode = T0.ItemCode WHERE T0.PriceList = 1

Urgent : Dynamically showing or hiding Header, main , or trailer section in reports

Hi List,
I have posted this question earlier also but didn't get any response. Can somebody please have a look at it and let me know whether it's possible or not ?
Hi List,
Can some body tell me how to hide/show header, main, or trailer section programatically ? I have a report in which i have to show or hide these sections based on a condition. I'm checking for value of a parameter and based on some calculation i have to show or hide main section. I mean if main section is visible then header section should not or vice versa.
Can somebody suggest some way to achieve this ?
Thanks in advance for your help

did u tried format trigger or conditional formatting.
U can write a basic checks using conditinal
formatting for ex.
if param1 greater than 100 hide the object.
hope this helps.
sh
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Manish Kothari ([email protected]):
Hi List,
I have posted this question earlier also but didn't get any response. Can somebody please have a look at it and let me know whether it's possible or not ?
Hi List,
Can some body tell me how to hide/show header, main, or trailer section programatically ? I have a report in which i have to show or hide these sections based on a condition. I'm checking for value of a parameter and based on some calculation i have to show or hide main section. I mean if main section is visible then header section should not or vice versa.
Can somebody suggest some way to achieve this ?
Thanks in advance for your help<HR></BLOCKQUOTE>
null

Hiding selection screen fields upon clicking a button

Hi .
I have a requirement like we need to hide and bring back the selection screen fields upon clicking a button( Expand and collapse in the same button) .
in ABAP Query,we can maintain this, for the variant we created.
We need this functionality on the selection-screen presently.
How to achieve this in the selection -screen?
Valuale pointers are desparately needful.
Regards,
SSR.

Hi,
SELECTION SECREEN (P_) Parameter
(S_) Select Options
SELECTION-SCREEN : BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001,
BEGIN OF LINE,
COMMENT (26) C1 MODIF ID XYZ.
SELECT-OPTIONS : S_MATNR FOR MARA-MATNR MODIF ID XYZ NO-EXTENSION .
SELECTION-SCREEN : END OF LINE,
BEGIN OF LINE,
COMMENT (26) C2 MODIF ID XYZ.
SELECT-OPTIONS : S_MATKL FOR MARA-MATKL MODIF ID XYZ NO-EXTENSION .
SELECTION-SCREEN : END OF LINE.
PARAMETERS : R_MATNR RADIOBUTTON GROUP RAD1 DEFAULT 'X'
MODIF ID ABC USER-COMMAND MAT,
R_MATKL RADIOBUTTON GROUP RAD1.
SELECTION-SCREEN END OF BLOCK blk1.
INITIALIZATION.
C1 = 'Product Code'.
c2 = 'Product Group'.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME0(7) = 'S_MATNR' OR SCREEN-NAME0(7) = 'S_MATKL'.
SCREEN-INPUT = '0'.
SCREEN-INVISIBLE = '1'.
ENDIF.
CASE SCREEN-NAME+0(7).
WHEN 'S_MATNR'.
IF R_MATNR = 'X'.
SCREEN-INPUT = '1'.
SCREEN-INVISIBLE = '0'.
ENDIF.
WHEN 'S_MATKL'.
IF R_MATKL = 'X'..
SCREEN-INPUT = '1'.
SCREEN-INVISIBLE = '0'.
ENDIF.
ENDCASE.
IF R_MATNR = 'X'.
IF SCREEN-NAME = 'C1'.
C1 = 'Product code'.
C2 = SPACE.
ENDIF.
ENDIF.
IF R_MATKL = 'X'.
IF SCREEN-NAME = 'C2'.
C2 = 'Product Group'.
C1 = SPACE.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
Hope it helps.
best regards,
Nagaraj Kalbavi

REG hiding selection-screen comment

Hi all,
Cud any one tell me how to hide a selection-screen comment.

hi chaitanya,
see the example may be useful.
SELECTION-SCREEN BEGIN OF BLOCK BLOCK.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(8) PWD.
SELECTION-SCREEN POSITION 35.
PARAMETERS: PASSWORD(8) MODIF ID AAA.
SELECTION-SCREEN END OF LINE.
PARAMETERS: PROGRAM(8).
SELECTION-SCREEN END OF BLOCK BLOCK.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = 'AAA'.
      SCREEN-invisible = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
reward if useful,
thanks and regards

Hiding Selected Plots

Hi,
I am plotting live data from tags on historical trend graphs. The graphs plot data from various different tags on one graph (to allow comparison), however sometimes I would like the ability to hide other plots so I can show a specific plot in more detail. A bit like hiding columns of data in Excel hides the corresponding data on a chart!
Is there a "hide" function/command/option on these charts?
The only (very crude) method I have discovered is simply turning the plot I want to hide the same colour as the background!! Many thanks for any ideas...
Stuart

This is what Paul described. Is this the simplest code ever or what?
Note that the order is imporant - the properties are executed top-to-bottom.
To learn more about LabVIEW, I suggest you try searching this site and google for LabVIEW tutorials. Here and here are a couple you can start with. You can also contact your local NI office and join one of their courses.
In addition, I suggest you read the LabVIEW style guide and the LabVIEW user manual (Help>>Search the LabVIEW Bookshelf).
Try to take over the world!
Attachments:
Plots.GIF ‏3 KB

Dynamically showing or hiding Header, main , or trailer section

Hi List,
Can some body tell me how to hide/show header, main, or trailer section programatically ? I have a report in which i have to show or hide these sections based on a condition. I'm checking for value of a parameter and based on some calculation i have to show or hide main section. I mean if main section is visible then header section should not or vice versa.
Can somebody suggest some way to achieve this ?
Thanks in advance for your help
null

Hello
You have to create a format trigger for each of the item you want to hide/show like this:
function B_2FormatTrigger return boolean is
begin
if :p_format = 'N' then
return(FALSE);
end if;
return (TRUE);
end;
To create a format trigger, you have to go in advance layout section of the property palette and choose format trigger.
Hope this help
Karine

Hiding select column in LOV results table

Is there a way to hide the select column easily in an LOV popup window? Right now I have a two column results area and it appears the LOV object dynamically adds a column of radio buttons in a column labeled SELECT and another column labeled QUICK SELECT. I wish to hid the SELECT column of radio buttons. It is not there when I look at the personalize link.
So right now the only two columns I have in my LOV mappings are Pay Period and Check Number. The results table renders as:
Select | Quick Select | Pay Period | Check Number |
I want it to not show the SELECT column. Any ideas?
Kris
Edited by: Kristofer Cruz on Feb 26, 2013 12:30 PM

Kris,
Did you try changing the render property of the table region of the LOV ?
Regards
Sridhar

Hiding Select options on a selction screen

hi,
How to Hide Select options on a selction screen
thnks.

hi,
eg:-
select-options: sel_mat for mard-matnr no-display.
select-options: sel_plnt for mard-werks.
in this the sel_plnt will appear and sel_mat will not be seen on the selction screen. there are many options avaliable with select-options..
Like
    [OBLIGATORY / NO-DISPLAY]
    [VISIBLE LENGTH vlen]
    [NO-EXTENSION]
    [NO INTERVALS]
    [MODIF ID modid] ... .
reward points if useful and mark answered if u got the answer

Regarding hiding Selection screen block

hi all ,
i have 2 blocks in the selection screen. the First block has 4 radiobuttons and the second block has 4 parameters.
i need to hide the block 2 based on the radiobutton checked in the initail block.
if radiobutton 1 or 2 is selected then the block should not be visible and if the rdbtn 3 or 4 is selected the block should be visible
i have wriiten the code but it doesn't work at all. the block is hidden but when i select the radiobtn 3 or 4 it doesn't work
the code i hve wriiten is as follows
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: par1 RADIOBUTTON GROUP rg2 DEFAULT 'X' USER-COMMAND ucom1
PARAMETERS: par2 RADIOBUTTON GROUP rg2 .
PARAMETERS: par3 RADIOBUTTON GROUP rg2 .
PARAMETERS: par4 RADIOBUTTON GROUP rg2
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER p_pwwrk TYPE plaf-pwwrk MODIF ID FSC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS p_wch TYPE cr_hname MODIF ID FSC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECT-OPTIONS s_mdv01 FOR g_mdv01 MODIF ID FSC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK a1.
I have declared this after Initialization.
AT SELECTION-SCREEN OUTPUT.
if par3 eq 'X' or par4 eq 'X'.
LOOP AT SCREEN.
IF screen-group1 = 'FSC'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
endif.
can anybody please suggest.
Thanx
Srinivas

Hiding Input Fields Locate the document in its SAP Library structure
To suppress the display of the input field on the selection screen, you use the following syntax:
PARAMETERS p ...... NO-DISPLAY ......
Although parameter p is declared, it is not displayed on the selection screen.
If the parameter belongs to the standard selection screen, you can assign a value to it either by using the DEFAULT addition when you declare it, or during the INITIALIZATION event. If you call the executable program using the SUBMIT statement, the calling program can also pass the value.
When you use user-defined selection screens, you can assign a value to the parameter at any time before calling the selection screen.
If you want to display a parameter only in certain cases, for example, depending on the values entered by the user in other input fields of the selection screen, you cannot use the NO-DISPLAY addition. If you use NO-DISPLAY, the parameter actually is an element of the interface for program calls, but not an element of the selection screen. As a result, you cannot make it visible using the MODIFY SCREEN statement.
To hide a parameter that is an element of the selection screen, you must declare it without the NO-DISPLAY addition and suppress its display using the MODIFY SCREEN statement.
We can Hide parameter / select option in selection screen dynamically by manipulating screen object.
SCREEN is like an internal table with a header line. However, you do not have to declare it in your program. Go to debugging mode and then view structure of screen.
You can modify SCREEN in your ABAP program during the PBO event of a screen. Its contents override the static attributes of the screen fields for a single screen call. The only statements that you can use with SCREEN are:
LOOP AT SCREEN.
MODIFY SCREEN.
ENDLOOP.
We can hide parameter by set screen-active to 0.
Here is example of how to hide parameter in selection screen. Write it, and change click on radiobutton to hide parameter.
    REPORT ZAALGAL0006.
    DATA: d_ucomm LIKE sy-ucomm.
    PARAMETERS: p_grpa1(10) MODIF ID A,
    p_grpa2(5) MODIF ID A,
    p_grpb1(2) MODIF ID B.
    PARAMETERS: p_actA RADIOBUTTON GROUP rad1 USER-COMMAND ACT DEFAULT 'X',
    p_actB RADIOBUTTON GROUP rad1.
    AT SELECTION-SCREEN.
    d_ucomm = sy-ucomm.
    AT SELECTION-SCREEN OUTPUT.
    LOOP AT screen.
    IF p_actA = 'X'.
    IF screen-group1 = 'B'.
    screen-active = 0.
    ENDIF.
    ELSEIF p_actB = 'X'.
    IF screen-group1 = 'A'.
    screen-active = 0.
    ENDIF.
    ENDIF.
    MODIFY screen.
    ENDLOOP.
    START-OF-SELECTION.
regards,
srinivas
<b>*reward for useful answers*</b>

Hiding selection screen full block

Hi Gurus,
I want to hide following selection screen in the out put.
plz guide me how can i do it.
SELECTION-SCREEN BEGIN OF BLOCK bestandsart
    PARAMETERS lgbst LIKE am07m-lgbst.
    PARAMETERS bwbst LIKE am07m-bwbst DEFAULT 'X'.
    PARAMETERS sbbst LIKE am07m-sbbst.
SELECTION-SCREEN END OF BLOCK bestandsart.
points will be rewared.
Regards
Rajesh

Hi,
use modif statment.
eg
parameters lgbst like am07m-lgbst modif id 'SRN'.
in the at selection-output event.
use this code.
loop at screen.
if screen-group1 = 'SRN'.
     screen-active = 0.
     modify screen.
endif.
endloop.
regards,
Santosh Thorat
Edited by: santosh thorat on Jan 4, 2008 6:17 PM
Edited by: santosh thorat on Jan 4, 2008 6:18 PM

Hiding Selected Slides in the Outline Pane

I have some slides that I'd rather not have show up in the pane. For example I have 5 slides with the same title, I don't want to have 5 of the same name showing up in the outline pane, I only want the first slide. I know you can hide slides in PowerPoint which hides their names in the pane but then the Fast Forward button doesn't move you to the next slide but to the next unhidden slide, or in my case the next quiz. This is a problem as the quizzes are locked down and the FF button has moved the viewer directly to the quiz without having seen the content being quizzed. To make matters worse, the viewer can't navigate away from the quiz without answering the question(s).
Does anyone know how to hide slides in the Outline pane without hiding them in PowerPoint? Thanks in advance.

Hi Face ,
I think providing a Navigation name to the slide via Slide Properties may help . It won't hide it but it will allow you to put a navigation name which will be shown as that slide's name in Outline Pane .
-Leo

Hiding Selection Screens

I wanted to ask for a way to hide my selection screens.
Im working on 3 blocks with all radio buttons. There is block b1 which has 3 radio buttons, and blocks b2 and b3.. which i want hidden and I dont know how to hide it. Blocks b2 and b3 must only show up when a selection from any radio buttons from b1 is made. Can anybody tell me how to hide the blocks at startup?
Here is my code...
data: group_id(3) type c.
Selection parameters
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
PARAMETERS:p_frm LIKE ekko-aedat,
           p_to LIKE ekko-aedat.
SELECTION-SCREEN END OF BLOCK a.
selection-screen begin of block b1 with frame title text-002.
parameters: pad radiobutton group one,
            pbb radiobutton group one,
            pcrc radiobutton group one.
selection-screen begin of block b2 with frame title text-003.
parameters: p_aj radiobutton group thr modif id sru default 'X' user-command ucom,
            p_ae radiobutton group thr modif id sru,
            p_as radiobutton group thr modif id sru,
            p_ak radiobutton group thr modif id sru.
parameters: thr no-display.
selection-screen end of block b2.
selection-screen begin of block b3 with frame title text-003.
parameters: p_bae radiobutton group two default 'X' user-command ucom modif id bb,
            p_mg radiobutton group two modif id bb,
            p_mkt radiobutton group two modif id bb,
            p_co radiobutton group two modif id bb.
parameters: two no-display.
selection-screen end of block b3.
selection-screen end of block b1.
parameters: b2 no-display.
at selection-screen output.
screen-active = 0.
case 'X'.
    when pad.
      group_id = 'sru'.
    when pbb.
      group_id = 'bb'.
endcase.
loop at screen.
    if screen-group1 = group_id.
      screen-active = 1.
      modify screen.
    endif.
endloop.
Thanks!!! Your help is very much appreciated.

HI JILL
PLS SEE THIS CODE MAIN ABSERVE THE GROUP IDS
AND SCREEN-INVISIBLE WHERE U WANT SCREEN IS HIDE THAT TIME U USE SCREEN-INVISIBLE = 1.
OK
SEE IT BELOW CODE
PLS COPY THE CODE AND TEST IT .
*SELECTION SCREEN FOR SELECTION CRITERIA
SELECTION-SCREEN BEGIN OF BLOCK charly
                 WITH FRAME TITLE text-100.
PARAMETERS: rb_dis RADIOBUTTON GROUP rb DEFAULT 'X'
                                  USER-COMMAND ucomm ,
            rb_hid RADIOBUTTON GROUP rb .
           P_DEL TYPE VBAK-VKGRP .
SELECTION-SCREEN END   OF BLOCK charly.
*SELECTION sCREEN FOR PO TABLE
SELECTION-SCREEN BEGIN OF BLOCK b2
                 WITH FRAME TITLE v_text.
SELECT-OPTIONS : s_xblnr FOR zmshub-xblnr MODIF ID gr2,
                 s_bstkd   FOR zmshub-bstkd MODIF ID gr2,
                 s_posex   FOR zmshub-posex_e MODIF ID gr2,
                 s_kdmat FOR zmshub-kdmat MODIF ID gr2.
PARAMETERS : p_upload LIKE ibipparms-path LENGTH 90 MODIF ID gr3 ,
             p_down LIKE ibipparms-path DEFAULT 'C:\output_log.txt'
                                       MODIF ID gr3.
SELECTION-SCREEN END OF BLOCK b2.
*SELECTION sCREEN FOR DOWNLOADING
SELECTION-SCREEN BEGIN OF BLOCK b4
                 WITH FRAME TITLE text-105.
PARAMETERS :
          rb_n_d_f RADIOBUTTON GROUP rb1 DEFAULT 'X' ,
          rb_ftp   RADIOBUTTON GROUP rb1 ,
          p_f_n TYPE c LENGTH 25 DEFAULT 'FILE NAME .TXT',
          rb_ws_d RADIOBUTTON GROUP rb1 ,
          p_dw_f_n TYPE c LENGTH 25 DEFAULT 'C:
TEMP\FILE.TXT',
          rb_op_ds RADIOBUTTON GROUP rb1 ,
          p_log_p LIKE filename-pathintern DEFAULT 'ZHKWEB01',
          p_pa_fn LIKE rlgrap-filename MODIF ID gr1
                 DEFAULT '//SOME-DIR/FILE.TXT',
          rb_ob_dw    RADIOBUTTON GROUP rb1,
         p_file LIKE filename-pathintern   "logical path
                    DEFAULT 'ZHKWEB01',       "name
         p_fname LIKE rlgrap-filename MODIF ID gr1     "path &
*filename
                 DEFAULT text-t02,             "/some-dir/file.txt
          p_f_name TYPE c LENGTH 25 DEFAULT
SOME-SERVERNAME\SOME-DIR\SOME-FILE.TXT'.
SELECTION-SCREEN END OF BLOCK b4.
AT SELECTION-SCREEN OUTPUT.
IF NOT rb_dis IS INITIAL.
    LOOP AT SCREEN.
      IF screen-group1 = 'GR3'.
        screen-invisible = 1.
        screen-input = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF screen-group1 = 'GR2'.
        screen-invisible = 0.
        screen-input = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
I WILL BE USEFUL
KK.

Hiding selected staves in a "section" of a composition

Similar Messages

Maybe you are looking for