Hierarchical Calculation of POC across Projects

Hi All
I m facing problems in calculation of POC across multiple projects in a specific hierarchy. So that all progress of multiple projects be reflected at the top level specific project. I had maintained the relationship across projects through subnetworks.
When i run cne2. It calculates the progress of multiple projects. CNE5 represents the progress of all projects individually. I want to have the progress of all projects represented in one top level project.
I want to use the Progress calculation through concept of summarization. For that i defined the hierarchy but i m still unable to use that hierarchy in progress analysis.
Regards

Ok i know it is way way late - try specifying the treecolumn

Similar Messages

MDX Sum of Max across Projects

I am designing a warehouse to handle some project information. We currently receive monthly reports of project Data, and one of the measures are :
Value Added During the Month
Current Total Value of Project ( which is Original Value + Sum of Value Added up to that point of time )
Some of the Dimensions used are :
Date Dimension
Geography Dimension which includes Hierarchy for projects : Country -> Region -> Project
I am trying to create a measure to be able to answer the following questions:
What is the Total Value of Projects for Specific year or Time Frame ?
What is the Total Value of Projects for specific Country or Region ?
This means i need to Sum the last reported value for the Projects that came into a specific year , or sum of latest project value present in a certain country.
I have currently written this calculation to my SSAS project :
AS Sum
[Geography SID].[Project Hierarchy].[Project Code].Members ,
[Measures].[Current Contract Value]
The [Current Contract Value] is a MAX measure in the Cube, ( i am assuming for now that the latest Value of project is going to be Max, still not sure how to handle it if it is not the case )
This calculation is giving me the correct answers when seen over Date dimension.
However, when seen over Country or Area , which are in the same dimension as the Project property being used to group the Max measure, it does not work, and gives me the Sum of Project values for all the Projects and not just projects inside each Country.
Any help on how to write the MDX query to allow for grouping by properties across the Hierarchy and obtain the attended measure.
Thank you for the help.

calculated member is working just fine for single employee but what about aggregation.
I'd like to aggregete the calculated member over company organization structure
for example
Empleyee
clculataed member Str_ogr
(sum of conctacts)
Employee1
1
a
Empleyee2
2
a
Employee3
0.75 b
Emmopye4
2 b
In my case all aggregation equals =2 but I'd like to get corect numbers
for str_org_ a =3
and form str b= 2,75

Please help to understand the Service parts planning,we r tring to do poc for project

Hi
Please help to understand the Service parts planning,we r tring to do poc for project
1)How the sales history flow from cube to Interactive forecasting screen(like dp in apo there is no Planning area to store data and no load planning area from cube,so please let me know how it will load data?)
2)How the Final demand will flow to DRP for further planning?
3)What is the exact purpose of BOD?
4)What is the leading indicator forecasting and the purpose?
5)Where data will store in SPP (forecasting and other data like liveache in dp)?
6)Product interchangeability and use?
6)Can you please forward the process document to understand the flow as i am not able understand the help document
Thanks for advance help
Regards
kkk

Hi,
Please check Service Part Supply Plan - Enterprise Services in SAP Advanced Planning and Optimization - SAP Library
BR

Does the dependent task/milestones across projects in a Master project get updated automatically?

Hi
We have a master project which has 5 sub projects in our PS 2013 environment. The milestones in the sub projects have dependency across projects with in the Master project.
Would like to know, if we update a milestone in one of the sub projects, would it automatically update the other milestone in another project (which has dependency)..?
Please suggest.

When you open the sub-project, you can see the corresponding linked tasks in grey color. As soon as you modify, can see the changes in the respective linked tasks.
Later when you open the other sub project, you will get a prompt like "Links between Projects 'project name'"
choose the task and accept the changes, later click on close.
Then you can see the changes reflected in the respective tasks.
Not mandatory to open the master project and expand.
Cheers. Happy troubleshooting !!! Sriram E - MSFT Enterprise Project Management

Sharing User Defined Variables across projects

Hi,
I'm wondering if it's possible to share User Defined Variables across projects. What I have in mind is that I would like to have my User Defined Variables configured in a central location and then insert them into my projects as linked variables so that they update automatically when I change their values. For example, I define a variable named Product_Version that has its value set to 9. Then I insert this variable into all my projects as a linked variable. After 2 months the product version changes to 10, so I change the value of the variable to 10 in the location where it is stored and it is automatically updated in all the projects. Can this be done somehow? I'm new to RoboHelp and I can't find any answer. I've been searching for the solution for some time in the product help, on the Internet to no avail. I even contacted Adobe Support and they redirected me to this forum I used Help and Manual before and their way of dealing with user variables was pretty simple.

Hi there
Unfortunately RoboHelp doesn't offer up a way to allow this, At least, not directly.
However, I do believe I found a way to make it happen, The variables are stored in a file named rhvariable.apj. So what you could do is to add this file as a Baggage File to each of your projects that will share the variables.
Now you would create a Shared Location as well as a new Category in your Resource Manager. This will create a common location to store the apj file.
Add the Baggage File to the location. Repeat the process for all projects that are sharing the variables.
Now, when the variable gets changed in any of the participating projects, the shared location should be updated and you can accomplish the goal.
However, note that even though you will have what you are wanting, it will still require opening each of the participating projects, synchronizing the APJ file and generating the output in order to update it all. No way I'm aware of to escape that.
Cheers,,, Rick

How to refer a common Skins and Templates across projects

Requirement : I had created multiple projects in an application, what i want to do is to refer the common Skin and Template created across the project.
I found the way where i can locate the resource bundle across projects, in Project Properties. Is there any other way like that or any config files to be added to incorporate it.

1. create the application with Template & create adflibrary jar out of that project.
2.deploy adfLibraryJar
3.add this jar in to your project. you will able to see the that template in pageTemplate dropdown.

TFS 2012 scrum board across projects

So we have recently upgraded to tfs 2012. I have a query that I can see in team explorer across projects. Our sprint query has Team Project In @Project, OtherProjectName. In team explorer, this works fine. But when I go to the query in the web interface
and/or the board, it only shows the work items from @Project. I really, really, really love the board. It prevents me from using the stupid scrum power tools to cut up story and task cards for our manual board. I hope this is something that I can make work!
Anyone?
Stephanie

Hi Stephanie,
Thanks for your post.
For this scenario, please submit it to User Voice site at: http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate it
seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Sharing of Tests across Projects

Is it possible to share Tests across Projects:
e.g.
Say I create a Project say v1.0, with requirements R1.1, R1.2 and R1.3 and create Tests named T1, T2, T3.
Subsequently, when I create Project v2.0, is it possible to search and map T1, T2 to R2.1, 2.2 for the purpose of regression test coverage tracking.
Thanks.

Hi
You can clone projects, but I don't think is possible to map requirements of tests from one project to another.
Regards
Alex

Library settings in Jdeveloper (how to make it shared across projects)

I am using Jdeveloper 10.1.3.4
I have a folder called com-libraries (which means common libraries) with lots of jar files inside that folder and sub-folders. Currently I have to add one jar file at a time, but Is there a way of instead adding the path of the folder and am good to go?
Instead of adding libraries for each and every individual projects, I thought of using it across all the projects, like shared libraries.
I thought of adding it to tools -> Embedded OC4J Server Preferences -> Libraries.
I add my libraries successfully there. Those changes are reflected in application.xml file.
But still it does not take effect. I restarted Jdeveloper and but still no help. Is this an issue with Jdeveloper or am I doing something wrong here?
Is there some other way to use user libraries as shared libraries for all of my projects which I open locally? If yes, then how?
Thanks in advance for your answers.

Hi user add the library to the Default Proyect Properties:
Tools > Default Proyect Properties >Libraries
You can create a new library with a lot of jars with a particular name "myLibrary":
Add Library > New or Load Dir.
Good Luck

Substitution of Profit center across project structure.

Dear All,
Requirement: Need to substitute profit center entered at Project definition level (at all times) to all project elements (WBS elements, N/W header and Activities). Also I need to validate this complete structure for the profit center inconsistency.
Problem: I have created Substitution rules, which will substitute across all the project objects (only when a new project is created). But if you change the profit center afterwards, it will change only at WBS elements level, however profit center at N/W and Activities will be substituted only when you make some changes to them. To avoid this I have created a validation, which will check across the complete structure.
Now after changing the profit center using CNMASS for all the objects, even though in physical you can find the new value at N/W header, however while saving it will validate and finds only the oldvalue and hence throws an error.
Can anyone throw some light on this?
With regards,
Harisha

Hi Martina,
My problem in detail:
I am creating a new project structure XXXX (having WBS elements, N/W and Activities) with initial profit center as AA. 1st time while saving the project, profit center AA will be substituted to all objects (I have maintained substitution rules at all objects)
Now again I will reopen the same project XXXX and I will change the profit center of project XXXX to BB (in the project definition level). With this due to automatic substitution only the profit center at WBS elements will be changed to BB. But not at N/W header and Activities (till you make some changes to N/W or Activity the profit center will be AA only, afterwards if you make any changes to N/W and Activities profitcenter will changes to BB). To avoid this difference I have created a validation rule, which will check the inconsistency of profit center all along the structure.
Now I am using mass change functionality to change the profit center in onego at all the objects. After making the masschange the profit center at all objects will become BB (but still not saved), however while saving the system validates the profit center and found still N/W and Activities having AA only (in database), so it wont allow us to save.
If you require further information please ask me again.
With regards,
Harisha

Trial to Full Version: Still have black bar across project...why?

I just downloaded the full version of Premiere Elements 9 for my Mac. The project I had created with the trial version I was led to believe would cease to have the black bar across the video once I downloaded and installed the full version. The black bar still exists. Is there something else I need to do to get it to go away?
Thanks,
-John

Hi
Seleting "Timeline > Delete Rendered Files" hasn't worked for me - the black line is still there.   Now I've done it, the "delete rendered files" option has greyed out so obviously Elements think it's done what it can.
Im using Premiere Elements 9 on Windows 7.   Could there be anything else I need to do?
Other info:
I'm using A Dell Pavilion hP Laptop with i7 Q720 1.60 GHz and 4GB RAM
My project uses MPG4 fles covnerted to AVI format but still with MPG4 codecs in (haven't figured how to sort that one out yet despite great help here...)
My Project is set up as DV - NTSC.
Workflow - haven't used any transitions or anything. One single mp3 on one track (although slip up 8 or 9 times to stop slippage), with hundreds of 2-3 second video clips (as above) on 3 video tracks.
Anything else I can tell you?
Really hope you can help as I've just spent about 8 hours on this project!
[EDIT - could it have anything to do with the fact that I have been rendering clips as I went along (I had to as I was having trouble with file formats). If so, there is there any way of "re-doing" a project, or do I have to start again from sratch?   I guess the auto-saves won't help me as I've been rendering every 30 secs or so.]
[EDIT 2 - problem solved (after a very worried hour!).   I removed all files from the organiser and then brought them all back in, and that did the trick]
Cheers
Oli

Applying User Defined Variables across project

Hello,
I'm working with the User Defined Variables feature and can't
seem to figure out how to apply a variable/value across all topics.
I may have misunderstood the definition of what this is supposed to
do, so it may be user error. It is my understanding that if you
have information that use repeatedly, for instance if I refer to a
product name in numerous topics and the product name changes, I can
set up a user defined variable and set this to update all the
occurrences. I can change it going in each topic and each sentence
where the occurence is by right-clicking the word and selecting
Insert User Defined Variable. Any ideas as to what I can do to make
a global update. Also, I'm reading the help, but still seem to be
missing something.
Thanks,
Michele

Thank you, Peter! This article is very informative and much
more clear (to me) than what I read in the RoboHelp help manual. I
understand now that this feature is used when you are creating
topics in a project and anticipating what may change--in which case
you insert the variable as you need it, then if it changes in the
future you can update it easily. I was looking at it as more of a
global search and replace to update information that already
exists. I think it will come in handy with our documentation
projects.
Thanks again. :-)
Michele

Create reusable BPM Human Task Form across Projects

Hi,
I have a challange in my project. I have a BPM application with many BPM process inside, and each BPM process has its own human tasks. Is easy for each HT create a form in a jspx file, for that an independent project is created.
The challange is: most of the HT payload is just informative, and it is wanted to be shown in most of the HT across the application so, what do you suggest me to do, in order to avoid reorganize a form every time I create it with "Autogenerate Form" or "Launch Create Form Wizard" options in the HT?. With reorganize a form I mean: put this label here, change this to read-only, change the layout, etc...
Thank you!
AAPDL

Hi,
its best to post this question to the SOA forum. The answer on this forum would be to use a page template, a parametrized bounded task flow and then add the bounded task flow to each page that has the template. However, the task flow in the HT case is generated, which means that you re-build it all the time (meaning you don't work with the same task flow but multiple). If you know how to just use the HT API to access the information to display, you could write a generic bounded task flow for this. Check on the SOA forum if they can come up with a template approach for your use case.
Frank

Sharing Site.Master Across Projects

I'm trying to figure out the best way in an ASP.net application to share my site.master file across multiple projects in the same solution.
Currently I have one project called Common which has the actual site.master. Then in my other projects I have added the site.master as a link. The problem is, it isn't recognized by any pages I create using the linked file. It shows up when I create a new
page and can be selected, but when the page is generated, the MasterPageFile="" is blank even though I selected it on the page creation menu. If I type it in manually it just gets a red squiggly.
If read, https://msdn.microsoft.com/en-us/library/aa992039(VS.80).aspx and am not really sure how or which of these would apply or be easiest to implement and maintain. The simple solutions seems to defeat the purpose of what I'm trying to do which
is eliminate the code in each of the projects and just have it exist in a single common project.
While building the master page also seems like a good solution there are issues with needing to make changes to the web.config between test and productions that need to be addressed and this solutions seems to make that somewhat difficult if not impossible.
I would really appreciate any feed back that you might have.
If this is the incorrect forum please let me know and I can relocate.
Rodney

Please post questions related to ASP.NET in the ASP.NET forums (http://forums.asp.net ).

Sharing resource across projects in OSB11g

Hi,
We have some common resources like Service Account, Proxy Server, JNDI Provider, Custom Resources etc in our projects that should be shared across different projects. Among these resources like proxy server can be created only in Configuration projects and resources like service account can be created only in osb project.
I found that files created in configuration project can be used across the projects. Is there any way to share the resource across the configuration projects? i.e accesing Service account residing in confuguration project from another configuration project.
I tried with project references but did not get success. And i tried to do standards java mechanism creating jar of configuration project and adding this jar to another projects, seems to be this is not possible.
Please let me know the best way doing this? Is there anyway to share wsdls and xsds too?
Thanks
Siva

Hi Manoj,
Yes, i am referring to configuration project of OEPE. I am creating all resources in OEPE and the deploying the same to OSB. I have created different configuration projects for different systems we have, that will have all related projects. Because of this the need has come for sharing the resources across configuration projects in OEPE itself. I am able to reuse the resources across the projects within single configuration project.
When i deployed i am seeing only the projects in OSB, so able to share the same in sbconsole.
What's the general practice while using OEPE? single configuration projectfor all the projects in them?
Thanks
Siva

Hierarchical Calculation of POC across Projects

Similar Messages

Maybe you are looking for