Hierarchy Authorization using Variable via Customer Exit

Hi experts,
I am wondering if I can do Hierarchy Authorization using Variable via Customer Exit? I know it can be done on normal value authorization by putting $+(the variable name). So can we do the same for Hierarchy authorization?
For my case I have a 0ORGUNIT and I would allow the role to access anything below its node. So do I put $VARORGUNIT in Technical Node Name and Hierarchy name as ORGEH, Type of authorization = 1 and Area of Validity = 3.
Points will be given!
Thanx!

Hello Chee Jason,
Are you working with version 3.5 or 7.0
How do you specify Hierarchy variable?
Any advise you can share is very much appreciated.
Thanks,
Patrick

Similar Messages

Double Role for Analysis Authorization using Variable via Customer Exit

Hi Guys I have been implementing AA using variable via customer exit and I have run into this problem, I wonder anyone have encountered this.
Example I have a User having 2 sets of authorization Roles
Role 1
Personnel Area = A, B
Personnel Sub Area = 1,
Role 2
Personnel Area = A
Personnel Sub Area = 1, 2
And what we can derive this that is the user is able to see A-1 B-1 and A-2 BUT NOT B-2 when we run all.
But instate when we run the report it is drawing B-2 as well as because we are entering
Personnel Area = A,B
Personnel Sub area = 1,2
Any idea how to solve this?
<removed by moderator>
Edited by: Siegfried Szameitat on Dec 3, 2008 2:41 PM

Hello Chee Jason,
Are you working with version 3.5 or 7.0
How do you specify Hierarchy variable?
Any advise you can share is very much appreciated.
Thanks,
Patrick

Hierarchy authorization with variables of type exit

Hi all,
I am trying to implement hierarchy based authorizations with variables. After collecting information from the SAP documentation and this forum, I think I know more or less how to do it, but it's not working and it has me very confused.
These are the steps I have followed:
- From RSSM, I have created a hierarchy authorization object including my characteristic and 0TCTAUTHH
- From RSSM again, I have created a hierarchy authorization pointing to the node $ZG_V_008
- From the Query designer, I have created a hierarchy node variable of processing type customer exit ZG_V_008 (are any special settings needed here?)
- From the Query designer, I have created another hierarchy node variable of processing type authorization, and I have used this variable to restrict the hierarchy for my characteristic
- I have edited the EXIT_SAPLRRS0_001 to watch for I_STEP = 0 and give values to ZG_V_008 (we'll get to my code later in case we solve this issue first
It is my understanding that with this setup, the user exit will be called to process the value of ZG_V_008 in I_STEP = 0, however, when debugging, I don't see any calls for the function with I_STEP = 0.
What have I done wrong?
Thanks a lot in advance.
Guillermo

Thanks, Jimmy, but that does not help much: my problem is that my user exit is not evaluated with I_STEP=0, but there are no error messages or anything like that.
I have created a test user without a developer role to see if that could have any impact, but it's still not working.
Any ideas?

Passed i_step = 2,3(Hierarchy Node Variable with Customer-Exit)

Hellow !
I want to insert the following ststement to force the variable to be executed with i_step = 2 or 3.
CASE I_VNAM.
when 'ZTEST'.
    CLEAR loc_var_range. REFRESH loc_var_range.
    CLEAR: l_s_range, ytest001.
LOOP AT i_t_var_range INTO loc_var_range.
   SELECT * FROM ytest001
              WHERE bname = sy-uname
                    AND node   = loc_var_range-low.
        IF sy-subrc = 0.
          l_s_range-low = loc_var_range-low.
          l_s_range-high = '0HIER_NODE'.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
         else.
          l_s_range-low = '#'.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
         endif.
ENDLOOP.
However, Passed customer-exit(Enhancements for Global Variables in Reporting) i_step =2,3
Regards,
Don

Hi,
in addition to Anil's valid input, make sure that ZTEST is NOT ready for input. Indeed "ready for input" vars cannot be changed via customer exits.
hope this helps...
Olivier.

Formula Variable with customer Exit (ABAP Code)

Hi Experts,
Please advise me wether i am going in the right way to achieve my requirment else please advise me any alternate approach and update me with the abap code for my customer exit as i am not familiar with ABAP.
My Requirment:
Data :
Emp_ID----Start_Date(DATS)---End_Date(DATS)
I had a user entry (intreval) VARIABLE created on Start_Date
User will enter the date intreval he want to analyze...
Ex: 01.01.2008 to 01.02.2008
Now i want to use the No of Days between user entered date intreval in my calculaction of a keyfigure
In the above example it is 31 days
So i created a Formula Variable of Customer Exit now i need a code that will
pass the user entered dates to
FM: FIMA_DAYS_AND_MONTHS_AND_YEARSImport parameters Value
I_DATE_FROM 01.01.2008
I_DATE_TO 01.02.2008
I_FLG_SEPARATE ' '
Export parameters Value
E_DAYS 31
E_MONTHS 1
E_YEARS 1
and need to pass the E_DAYS (31) to the result of formula
User Entry Variable (Intreval) : ZST_VAR
Formula Variable (Customer Exit) : ZND_EXIT
Code
WHEN 'ZND_EXIT'.
    DATA: low_date2 TYPE d,
    high_date2 TYPE d,
    num_days TYPE N,
    new_low_date2 TYPE d.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO ls_varrange WHERE vnam = 'ZST_VAR'.
        CLEAR l_s_range.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        ls_varrange-low = low_date2.
        ls_varrange-high = high_date2.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
    I_DATE_FROM          = low_date2
    I_DATE_TO            = high_date2
    I_FLG_SEPARATE       = ' '
IMPORTING
    E_DAYS               = NUM_DAYS
l_s_range = NUM_DAYS.
APPEND l_s_range TO e_t_range.
EXIT.
ENDLOOP.
endif.

Hello,
Before the WHEN statement it shoud have a CASE statement. In the user exit coding place your WHEN statement anywhere between CASE...ENDCASE statement.
your code should look like
DATA: low_date2 TYPE d,
high_date2 TYPE d,
num_days TYPE N,
new_low_date2 TYPE d.
Case i_vnam.
WHEN 'ZND_EXIT'.
IF i_step = 2.
LOOP AT i_t_var_range INTO ls_varrange WHERE vnam = 'ZST_VAR'.
CLEAR l_s_range.
l_s_range-sign = 'I'.
l_s_range-opt = 'BT'.
low_date2 = ls_varrange-low.
high_date2 = ls_varrange-high.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = low_date2
I_DATE_TO = high_date2
I_FLG_SEPARATE = ' '
IMPORTING
E_DAYS = NUM_DAYS
l_s_range-low = NUM_DAYS.
APPEND l_s_range TO e_t_range.
EXIT.
ENDLOOP.
endcase.
Thanks
Chandran

Formula Variable with customer exit

Hi,
can we use Formula variables with customer exit based on characteristics(ex Bill date)? if yes, can you guys help me on this.
Thanks
kri

Yes , you can use a formula variable with customer exit based on characteristics .
Depends on the requirement what you want to show in the formula variable ,
Eg : if you want to show the max fiscal year period , in that case :
create a new formula in the keyfigure section of your query , go to edit , you can see formula variable below the keyfigures ,
right click on the same and create new formula variable :
Write the code for the formula varible in the backend as we do for normal customer exit varaible :
for this e.g the code will be :
FORM get_variable_value
      tables E_T_RANGE      type RSR_T_RANGESID
      using I_VNAM          type RSZGLOBV-VNAM
            I_VARTYP        type RSZGLOBV-VARTYP
            I_IOBJNM        type RSZGLOBV-IOBJNM
            I_S_COB_PRO     type RSD_S_COB_PRO
            I_S_RKB1D       type RSR_S_RKB1D
            I_PERIV         type RRO01_S_RKB1F-PERIV
            I_T_VAR_RANGE   type RRS0_T_VAR_RANGE
            I_STEP          type I.
DATA L_S_RANGE LIKE LINE OF E_T_RANGE.
DATA loc_var_range LIKE rrrangeexit.
Data : l_inPer TYPE string.
IF i_step = 1.
Select min( distinct FISCPER )
        from /BIC/A(DSO name)
        into l_minper .
    l_s_range-sign = 'I'.
    l_s_range-opt = 'EQ'.
    l_s_range-low = l_minper .
    APPEND l_s_range TO e_t_range.
endif.
drag the formula variable in the new formula created and exexcute the query , you will be able to see the output .
This is just an example , your code will differ as per your requirement .

I need example for VARIABLES with Customer Exit.

hi every body i need example for Variable for Customer Exit.

Hi,
You can define 'Formula' variables in your customer exit..for example..
you need to calculate no of machine running hours per month, in order to
caculate the machine total utilization time..in this context.. you need to know
how may hours are there in an month by month..
you can define a variable and write the code in the customer exit for deriving the total no. of hours available for that month and get that value into a variable for further calution like deducting the down time and set up time so on..in your
calculated KF..
Hope this helps..
Assign points if useful..
Cheers,
Pattan.

Formula variable in Customer exit

Hi Experts,
I need help.
I create
 first Formula variable (Z_OPTSEL) for a user entry, mandatory, ready for input, dimension ID = Number and
 second Formula variable (Z_OPT1), customer exit, mandatory, not ready for input, dimension ID = Number .
User Exit code in ZXRSRU01 is :
When 'Z_OPT1'.
case i_step.
when '2'.
clear e_t_range.
read table I_T_VAR_RANGE INTO loc_var_range with key vnam = 'Z_OPTSEL'.
if sy-subrc = 0.
 if loc_var_range-low = '1'.
 l_s_range-low = '2'.
 endif.
 if loc_var_range-low = '2'.
 l_s_range-low = '0'.
 endif.
endif.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
clear l_s_range-high.
APPEND l_s_range TO e_t_range.
endcase.
Unfortunately, I get no value in loc_var_range-low (from Z_OPTSEL) so , I never can fill up Z_OPT1 !! What could I do to fix it ?
Any help would be welcome .
Thanks


My Dear Friend 
Please try the below code: 
Case vnam. 
When 'Z_OPT1'. 
check i_step = 2. 
 
read table I_T_VAR_RANGE INTO loc_var_range with key vnam = 'Z_OPTSEL'. 
 
if sy-subrc = 0. 
Clear l_s_range. 
if loc_var_range-low = '1'. 
l_s_range-low = '2'. 
endif. 
if loc_var_range-low = '2'. 
l_s_range-low = '0'. 
endif. 
endif. 
l_s_range--sign = 'I'. 
l_s_range-opt = 'EQ'. 
APPEND l_s_range TO e_t_range. 
endcase. 
 
Hope it helps. 
Cheers Abhijit 

Removed

Prob in text variable with customer exit

Hi to all
I am working in PA module in HR ,In my Report i have to count total number of trainee and lateral in given Date range that From date to To Date , Before that i have to calculate a Total Employee Strength before one day of From date , suppose user enter a 1st of April 2007 to 1st of jun 2007 , so Employee strength should be calculated on the 31march 2007, for that i have written custome exit , now i am getting a value also , for Display that date have a created a text variable with customer exit , but i am not able to get that date , it should be display strength as on 31march2007 , instead of it is displaying Strength as on 00.00.0000.I am giving a cod also
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = 'EB1A'.
append LS_Range to e_t_range.
WHEN 'ZPA_DATE'.
if i_step = 3.
READ TABLE I_T_VAR_RANGE INTO L_S_VAR_RANGE WITH KEY VNAM = 'ZPA_DATE'.
IF SY-SUBRC = 0.
ZTEST = L_S_VAR_RANGE-LOW.
ztest1 = ZTEST - 1.
export p = ztest1 to MEMORY ID 'VALUE'.
ENDIF.
endif.
WHEN 'ZFRMDAT'.
if i_step = 3.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = ztest.
append LS_Range to e_t_range.
endif.
when 'ZPA_CDAT'.
if i_step = 3.
ztest1 = ztest - 1.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = ztest1.
append LS_Range to e_t_range.
endif.
when 'ZPA_VAR3'.
if i_step = 3.
ztest1 = ztest - 1.
import p = ztest1 from memory id 'VALUE'.
concatenate ztest16(2) ztest14(2) ztest1+0(4) into date separated by '.'.
move date to temp.
move 'Hello' to temp.
ls_range-sign ='I'.
ls_range-opt = 'EQ'.
ls_range-low = temp.
append LS_Range to e_t_range.
endif.
Please help me to come out
Thanks

Hi Stefania,
to me it looks like your local variable num_mese is not defined with the correct data type.
Try to change
if num_mese = 09 to if num_mese = '09',
same for 10 -> '10', 11 -> '11'.
If that does not help please let me know your coding where you define the type of num_mese (DATA statement).
Regards
Stephan

Characterstic variable with customer exit

Can u some bady help me.
How to express about Characterstic variable with customer exit
Edited by: chenna reddy on Aug 7, 2008 9:48 PM

Hi,
The variable may be personalized with some value.
To remove the personalization for a user:
Step 1: RSA1 -> Search for ODS 0PERS_VAR
Step 2: Manage -> Contents ->selective deletion
Step 3: Put the user to remove the personalization
http://help.sap.com/saphelp_nw04/helpdata/en/01/42c73c13b0ce5be10000000a114084/content.htm
Regards
Happy Tony

Fill BEx Variable with more than one value via Custom Exit

Dear SDN comunity,
I want to fill a BEx Variable via a custom exit. My problem is, I don't know how to fill this variable with more than one value.
I try to give you some background info based on an exaple:
Variable-Details
Type of Variable: Characteristic Value
Variable Name: ZCCD
Description: Company Code Selection
Processing by: Custom Exit
Characteristic: Company Code
Variable Represents: Multiple Single Values
This is the used ABAP code:
WHEN 'ZCCD'.
CLEAR l_s_range.
l_s_range-low = '2002;2004'.
l_s_range-sign = 'I'.
l_s_range-sign = 'EQ'.
APPEND l_s_range TO e_t_range.
The system returns this message:
Value "2002;2004" is too long for variable ZCCD
appreciate your help!
//michael

Eugene, Marcus
it works now, thx a lot!
Please find attached the final code:
CLEAR l_s_range.
l_s_range-low = '2002'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR l_s_range.
l_s_range-low = '2004'.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
(Delta to Marcus's code is bold)

Using Formula Variable in Customer Exit variable

Hi,
I want to assign valuees of 2 Formula Variables to one cstomer exit variable based on some Characteristic.
Example. Formula variables are Early and Late. If Early = 3 and Late = 4 , I want to pass value to the Customer Exit variable as Low = 3 and High = 4.
The problem is in I_T_VAR_RANGE there is no value for formula variable in LOW field.
Other variables based on Characteristics have values in this field.
What can I do in this case?
Regards
SSS

SSS,
You can restrict your characteristic with two variables in the value range options of restricting.
One can be used as low and the other can be high.
Hope that helps.
Thanks.

How to use formula variable in customer exit

Hi all,
I just want to use formula varible in customer exit
For eg,
I have created formula variable with user manual lnput eg: ZFM_V01 = 30
Another char variable with user manual input eg: 0keydate = 28/02/2011
Required output,
I just want to read my ZFM_V01 value in customer exit
Result = 0KEYDATE - ZFM_V01
EG:
result = 28/02/2011 - 30
Required result = 29/01/2011
Kindly guide me how u get formula varibale value into customer exit(CMOD) and find the required result. please help me.
Thanks & Regards,
R. Saravanan

Sorry, Bhanu,Ashwin need more info
As my understand ::
Function module RSW_CURRENCY_TRANSLATION uses the following parameters
Import parameters
I_CTTNM : Currency translation key (optional)
I_AMOUNT: Amount in source currency (not optional !!) (data type: floating point !!)
I_SCUR : Source currency (optional) I_TCUR : Target currency (optional)
I_TIME_IOBJVL : InfoObject for determination of the time reference (optional)
I_SCUR_IOBJVL : InfoObject for determination of the the source currency (p.eg. 0COMP_CODE) (optional)I_TCUR_IOBJVL : InfoObject for determination of the the target currency (p.eg. 0COMP_CODE) (optional)
I_PERIV : Fiscal year variant (optional)
I_RATE : Exchange rate (optional)
Export parameters
E_AMOUNT : Amount in target currency (data type: floating point !!)
E_RATE : Exchange rate
E_SCUR : Source currency
E_TCUR : Target currency
I created a Currency key(ZXX) which takes CAD and converts to GBP on Planned Exchange rate (P) with time reference 0CALMONTH.
In my case :
Currency Key : ZXX (Confused here)
Source Curr :CAD
Target Curr :GBP
I need a Variable ,which takes time reference and gives back the exchange rate .
,,I am I missing some thing ?
Sudh

Text Variable through Customer Exit using FM MONTH_NAMES_GET

Hi Friends,
I have a query which runs through a variable Key date(ZPDATE). (Key date may also be changed by the user).
I have another customer exit variable(ZVNDATE1) where it reads from the Keydate variable and it represents one month less than the key date and it holds two dates first day of month and last day of month.
Let say: Key date(ZPDATE) = 12.03.2008
             ZVNDATE1 = 01.02.2008 and 28.02.2008
I have created RKF Overdues-1 ristricted with ZVNDATE1.
My requirement is I wan to represent this RKF Overdues-1 as Feb 2008 . In order to do that I want to create a Text variable(ZTEXT1) using customer exit .
As I am not very good in ABAP please can anybody provide me the code for text variable:
I am writing in the below.. but I dont know how to represent FM..etc..
WHEN 'ZTEXT1'.
        READ TABLE i_t_var_range INTO w_var_range WITH KEY vnam = 'ZVNDATE1'.
        IF SY-SUBRC = 0.
          CLEAR l_s_range.
          l_date = w_var_range-low.
                   CALL FUNCTION MONTH_NAMES_GET'
Please can you provide me the remaing code..
Thanks
Sudhakar..

Hi Sudhakar,
Instead what you can do is, add few more lines of code instead of calling fm.
case 'month'.
If month = '1'.
desc = 'jan'.
elseif month = '2'.
desC = 'feb'.
endcase.
concatenate desc year into w_v_range-low.
Hope that helps.
Thanks

Table look up using value from customer exit variable

I have a customer exit variable, CURRMON, which the user enters in the format MM/YYYY. From this entry, I would like to do the following to calculate and display the number of business days in the selected month:
Do the following to get Business Days in month.
Use the KF "FBA Day" (CTAFBAD) from the CTA_M01 infocube and write ABAP routine.
1. Based on user entry cal month get the last calendar day .
2. Do a master data look up (CTAFBAC is the master data object), using the last calendar day from step 1.
3. CTAFBAD is the attribute of CTAFBAC so move the value of CTAFBAD to the result, and display this result
Can anyone help me with this?

Hello,
You can use i step = 1 in SMOD transaction and write the code there.
l_s_range-low = sy-uname.
append ls_range to e_t_range.
regds,
Shashank

Hierarchy Authorization using Variable via Customer Exit

Similar Messages

Maybe you are looking for