[Hierarchy] ... but with custom RFC

Hi,
I would like to know if it is possible to have both advantages of Query (for the support of hierarchies) and custom RFC (for flexibility).
What makes VC able to recognize query data ?
If I have the same output structure as with the FM 'RS_VC_QUERY_DATA_FLAT', will VC be able to display the indent, the '+'/'-', ... ?
That would make possible to build data table that would not rely uniquely on queries.
Thanks in advance.
Best regards,
Guillaume

This little "hierarchy-functionality" only kicks in, when the dataservice is of type BI AND has hierarchies on this field enabled.
So, unfortunately no chance with an RFC.
The only (very awkward) way to do that is to use a remote cube on this RFC and using a BI query then. But then you'd basically still need to load the master data into BI and make it have a hierarchy.

Similar Messages

Connection with Customized RFC

Hi,
i am trying to connect with the SAP RFC that is not the inbuild one but its a customized RFC in SAP.
Is there any different way of connecting through customized RFCs or its a normal way?
Is anybody have done similar work.

Hi Naren,
how are you doing ?
>>Thanks a lot for the mail. Amit,
you are most welcome
>>where to set this FM properties (Is it in .net or SAP).
at this point i'd recommend that you do some reading starting with :
http://help.sap.com/saphelp_nw2004s/helpdata/en/51/d5470940fd564b888f4beb9523fa6c/frameset.htm
this should help clarify many things
the setting lies in the SAP system. it is definied on the RFC [remote function call]
when you have logged on the the SAP system [your backend] open transaction : se37, select your rfc, select edit, select properties, select remote enabled.
save and then activate the rfc
>> What FM stands for ?
FM = function module
a RFC is a FM which is remote enabled
remote function call
only after any FM is remote enabled, will it be visible in the visual studio server explorer, and only after that can a proxy be generated
>> i just have the RFCs name on which i have to establise the connection to fetch
>> the data. i able to connect to this RFC but its not returning me any data.
if you are able to connect to this RFC , then it would mean that the FM is already remote enabled
>>there is no error in the code but its not returning me the data.
at this point you have successfully established a connection, what remains for you is to study the input parameters and ensure that you correctly populate the input structures. also keep in mind that the results are user & client specific, so ensure using transaction se37 that your inputs are fine and you receive the expected results
[hit F8 for a single test of a RFC]
my asnwer is similar to Daniel's in your other thread
Not able to fetch the data using RFC
my request to you is to read more documentation on how to create NCo proxies
please read Rima's answers here
.Net Connector 2.0 Samples
and if you chose to do a search for 'samples' in this forum, you will come across other valuable resources which will give you a gr8 start for most regular working tasks.
happy reading )
with respect,
amit
Message was edited by:
amit chawathe

Role without Tcode but with customized "Z" Object only

Hi all,
Please help my querry is that with a Single Role as while seeing that role in PFCG in Menu Tab no Tcode is assigned and in the Authoriztion Tab -> change authorization tab just a single(one) Z auth object is maintained with Display actvt and i am not able to understand how this is going how the user are able to access the the Role without TCODE assigned but with just a Z authobject. please tell How this is going and working .
Your help will be greatly appreciated and pleas tell how this Z auth object are created.
Thanks,
Chandresh.

>
> You need to provide more infos (from the system) and just asking on site is a good idea (as mentioned by Alex).
>
> Cheers,
> Julius
I agree that asking onsite could give more insight into the Z-Object usage. I can explain the probable reason of having the Z-Object as a stand alone authorization
In a role inheritance scenario, when you have roles with 100+ transactions (role A, B,C, .......) which act as the master roles and the derived roles being A1,A2,A3...... depending on the number of inherited roles you have in the set-up, authorization objects like customer authorization group or vendor authorization group can be a tough task (as these are not called in the organization level values) - in this situation as the authorization groups would have to maintained individually in the inherited roles and can be a time consuming task with the additional risk of passing down the values of the master role every time it is generated and inherited - a better option could be to maintain a non-existent value in the master role , inherit it so the non-existent value is passed down to the inherited roles. To give access on the specific authorization groups , create a role with only the object F_KNA1_BED or F_BKPF_BED as might be the case and maintain organization specific values in these object and assign it to the users who need it
My guess would be that the Z-object the operator mentions is something that is developed to address such an issue

ADF wont work with custom LoginModule! Question for Mr. Nimphius!

ive setup login module as shown in:
http://www.oracle.com/technology/products/jdev/howtos/10g/jaassec/index.htm
code:
actionContext.getHttpServletRequest().isUserInRole("Administrators") works! but i also want this code to work in ADF:
appmod.getSession().isUserInRole("Administrators")
with default loginmodule "oracle.security.jazn.tools.Admintool" everything is ok! i can get roles in adf but with custom login module i cant!
in ApplicationModule config i have setup
jbo.security.config =
jbo.security.context = oracle.security.jazn
jbo.security.enforce = Must
jbo.security.loginmodule = oracle.sample.dbloginmodule.DBTableLM.DBTableLoginModule
please help!

thank you very much for the reply!!!!
i did what you told but no luck... :(((
i still can not get user role from application module!
this code:
if (AppModule.getSession().isUserInRole("Administrators"))
System.out.println("User is in role! ");
simply does not work!
ive tested on standallone oc4j, ive tested on embeded jdveloper 10.1.2.1 !
i get NullPointerException at at oracle.jbo.server.security.jazn.JboJAZNUserManager.isUserInRole(JboJAZNUserManager.java:113)
the thing is that i can use isUserInRole() from request but i can not from application modulle....
...ive lost hours in decompiling and tracking down ADF code just to realize that there is no way to use custom login module with ADF because the thing is hard coded to use xml or ldap..
the only way i see how to solve the problem is to extend oracle.jbo.server.SessionImpl
and override
getUserRoles()
and
isUserInRole(String s)
i can substitute session class with my own by setting
SessionClass = oracle.jbo.server.ExtendedSessionImpl
in file jboserver.properties (which is inside bc4jmt.jar)
the easier way is to write my own function isUserInRole() in EntityImpl... i always can get user principal name with AppModule.getUserPrincipalName()
what do you think?

PO PDF errors when using custom RTF Template, but works with custom xsl

Hi,
I have done following set up steps for PO PDF
Setup / Organizations / Purchasing Options / Control TAB / set 'PO Output Format' = 'PDF'
setup / purchasing / document types / select "Standard Purchase Order" / Set the Document Type Layout to your new template.
But with the RTF template the PO Output for communication completes with error. However when I use custom XSL-FO style sheet, it works.
Can anyone help me how I can make my RTF work? When click on the preview of the template, it shows the PDF output though. Am I missing any other set up steps? Your help is greatly appreciated.
Thanks,
Sharmila

I think the only way to have control over the html output is to enclose the tags or any information within a borderless table and align the text and table as necessary...
Thanks,
Bipuser

Report with custom hierarchy

Hi experts!
I have an assignment to do.
My clients wants a report with a hierarchy but he wants to see "Total" on last row of a table.
My hierarchy is:
+Total
---Level1
---Level2
-----Level2.1
My analysis should to see:
LevelA1 (Can Drill)
LevelA2 (Can Drill)
Level 2.1 (Can Drill)
Total (No Drill)
In selection steps pane:
1. Start with all members
2. Then, Keep all members of: LevelA levels
I think that I have another step to show TOTAL and no drill
Is that possible???

Yes we can do this:?
Create a hierarchy accordingly and go to col properties there u have a interaction option check the drill option accordingly for what all columns u need a drill down keep that.Do and let me know for any updates
If helps mark as correct :)

I m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help. i have told them nuumerous times that for better understanding i have made a video of it but no response.. really disspoint

i m having issues with the phone which i made a recording but the customer care support in our place donot seem to be of much help.
i have told them nuumerous times that for better understanding i have made a video of it but no response..
really disspointed with your customer support.
i have uploaded them in google docs..links below.. t
he first one happened on 30th of april 2014 https://docs.google.com/file/d/0B6z0lUXVGPGrc0tXNnZFaDQ3WDg/edit
the second happened today. i called customer care but no satisfactory respose either. https://docs.google.com/file/d/0B6z0lUXVGPGrSldEeWQ3aGFhaDA/edit
who is going to help me out and atleast pay attention to what my problem is. apple seems to ignore my attempts to show them what is the problem... the dont even want to see the videos.. !! disgusting.
its still under warrenty. please help.

Take your iPhone to an Apple Store or authorized service center in the country where you purchased the iPhone and they will look at it and replace it under warranty if applicable.
If you cannot take it person contact them to determine how to send them your phone.
You can't expect them to replace your iPhone without first examining it.

Hi there i have ipod touch 2nd gen and i am tryna restore it but i get error 21 with orginal fireware and 1601 with custom fireware and when it connected to itunes and i try to boot it up by restoring it white screen with lines thorugh it

hi there i ahve ipod touch 2nd gen and i am tryna restore it but get error 21 with orginal fireware and 1601 with custom firewarw and when connected it to itunes and i try to boot it by resotring it white screen with lines through it

Those errors are covered here:
http://support.apple.com/kb/TS3694

Runtime error - FBL1N - vendor balance with customer line item

Hi gurus,
One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
Runtime Errors         PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
     not caught in
    procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "RSDBRUNT" is meant to execute an external PERFORM,
    namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
    this routine does not exist.
    This may be due to any of the following reasons:
    1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
    The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
    the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
    2. If the program SAPMSSY1 is involved in the runtime error, one of
    the function modules called via RFC is not flagged as remote-capable.
    (see Transaction SE37 Goto -> Administration -> RFC flag)
    3. There is an inconsistency in the system. The versions of the
    programs "RSDBRUNT" and "RFITEMAP " do not match.
Warm regards,
Dhananjay R.

Hi martin
still problem was not solved. actually i am working on ECC 6.0 & not required to implement the sap note on development. i had done the configuration in vendor master & customer master for clearing.
please suggest me.....what to do ?
Than'x
Dhananjay R

FBL1N error - vendor balance with customer item

Hi gurus,
One scenario where i have assign vendor as customer & customer as vendor in vendor & customer data. also make tick mark for both clearing with vendor & customer.
when i see the customer report with vendor item it shows me the customer & vendor dues but when i tried to see the vendor balance with customer line item it gives dump error.
Runtime Errors         PERFORM_NOT_FOUND
Exception              CX_SY_DYN_CALL_ILLEGAL_FORM
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FORM', was
     not caught in
    procedure "%_LDB_CALLBACK" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    The program "RSDBRUNT" is meant to execute an external PERFORM,
    namely the routine "CB_DDF_GET_KNA1 " of the program "RFITEMAP ", but
    this routine does not exist.
    This may be due to any of the following reasons:
    1. One of the programs "RSDBRUNT" or "RFITEMAP " is currently being developed.
    The name "CB_DDF_GET_KNA1 " of the called routine may be incorrect, or
    the routine "CB_DDF_GET_KNA1 " is not yet implemented in the program "RFITEMAP
    2. If the program SAPMSSY1 is involved in the runtime error, one of
    the function modules called via RFC is not flagged as remote-capable.
    (see Transaction SE37 Goto -> Administration -> RFC flag)
    3. There is an inconsistency in the system. The versions of the
    programs "RSDBRUNT" and "RFITEMAP " do not match.
Warm regards,
Dhananjay R.

Hi Dhananjay,
Pls show the error/ dump to the ABAPer
Regards,
Kiran

No Query Result After Using Hierarchy Node Variable (Customer Exit)

Hi
I have problem at my query. It doesn't show anything in BEx but when i check the data in BW using tcode LISTCUBE i can display the data.
This problem happen when i change the restrictions for one of characteristic in filter value.
The characteristic is custom Infoobject (ZCPARTNER), which like Infoobject Partner Unit.
Previously I set the restriction with constant value, example : A500,A700,A710,A720,A730,A740 and it worked before.
But when I change it using hierarchy node variable (customer exit), this problem is arise.
Here is my code at ZXRSRU01
WHEN 'ZHIEPART'. --> hierarchy node variable
   BREAK-POINT.
    IF i_step = 2.
    Read from ZZCONSGR information
      LOOP AT i_t_var_range INTO loc_var_range
         WHERE vnam = 'ZZCONSGR' OR vnam = 'ZOCONSGR'. --> read input value from consolidation group variable
        CLEAR l_s_range.
        CLEAR l_s_range-low.
        IF loc_var_range-low EQ '000000000000030000'
           OR loc_var_range-low EQ '000000000000010130'.
          l_s_range-low = 'MEZBUNITMDI'.
          l_s_range-high = '0HIER_NODE'.
        ELSEIF loc_var_range-low EQ '000000000000040000'
           OR loc_var_range-low EQ '000000000000010160'.
          l_s_range-low = 'MEZBUNITMPI'.
          l_s_range-high = '0HIER_NODE'.
        ENDIF.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Here the hierarchy in BW system:
XXX Cons Unit Hierarchy Set; InfoObject ; Node Name
- XXX Cons Unit Hierarchy Set; 0HIER_NODE; ZBUNITALL
- XXX DownStream ... ; OHIER_NODE; MEZBUNITMDI
     - ME/A730; 0CS_UNIT; MEA730
     - ME/A740; 0CS_UNIT; MEA740
- XXX Power ; OHIER_NODE; MEZBUNITMPI
    - ME A800 - A808; OHIER_NODE; MEZBUNITMPI
    - PT Mitra xxx; 0CS_UNIT; MEA820
Anyone can help my problem? Thank you
Regards,
Satria B Tandyono

Hi Satria,
Instead of following code ---
CLEAR l_s_range-low.
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
l_s_range-high = '0HIER_NODE'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
l_s_range-high = '0HIER_NODE'.
ENDIF.
try this ---
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
ENDIF.
Note : whenver the option is EQ, the system takes only low value.

Portal content translation with custom theme

Dear Gents,
I am experiencing a very strange problem.
I have tried to change some english iview names to arabic using portal content translation. Since I wont understand properly what each word means, I used hindi names instead of arabic.
So far so good.
For this test user, I am using a brand new portal desktop with copied framework page.
Everything works lovely when using SAP standard themes in my custom desktop But when I use my own theme, the theme does not load. I can see the roles and full navigation hierarchy, but without theme images or colors..
Has anyone faced the similar issue before? Please guide
Regards,
Ankur Agarwal

Hi Ankur,
so when you log into the portal by using your theme than you will see your desktop but without any images and colors of your theme, isn't it?
Are you sure you have define a proper desktop rule?
So this desktop rule switch to your Portal Desktop?
The desktop is assignt to the portal framework page and the theme?
And the theme itself is stored successfully during the saving process?
So perhaps open your theme once more and save it once more.
But wait until you have really saved your theme. This takes time.....
During saving of the theme all the needed css files will be created.
Best regards
Frank

How do I add URI web link with custom tooltip like "CLICK HERE TO UPDATE" instead of URI web link in tooltip.

How do I add URI web link with custom tooltip like "CLICK HERE TO UPDATE" instead of URI web link in tooltip.

You've probably found an answer to this by now, but I think this has been addressed in another forum -- The link below suggested using a button and adding the tooltip to the button.
https://forums.adobe.com/thread/304974?start=0&tstart=0
Sounds like it would work but I haven't actually tried it.
Good luck~!

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?

Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?
Thanks!
-Adrian

the old apps are on my computer but they have had upgrades since they were put on the ipod originally. you think you would get a warning about this when you restored. I was not worried about losing the progress of the apps but i would have been worried about the app it self!!!!!

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

[Hierarchy] ... but with custom RFC

Similar Messages

Maybe you are looking for