ADF wont work with custom LoginModule! Question for Mr. Nimphius!
ive setup login module as shown in:
http://www.oracle.com/technology/products/jdev/howtos/10g/jaassec/index.htm
code:
actionContext.getHttpServletRequest().isUserInRole("Administrators") works! but i also want this code to work in ADF:
appmod.getSession().isUserInRole("Administrators")
with default loginmodule "oracle.security.jazn.tools.Admintool" everything is ok! i can get roles in adf but with custom login module i cant!
in ApplicationModule config i have setup
jbo.security.config =
jbo.security.context = oracle.security.jazn
jbo.security.enforce = Must
jbo.security.loginmodule = oracle.sample.dbloginmodule.DBTableLM.DBTableLoginModule
please help!
thank you very much for the reply!!!!
i did what you told but no luck... :(((
i still can not get user role from application module!
this code:
if (AppModule.getSession().isUserInRole("Administrators"))
System.out.println("User is in role! ");
simply does not work!
ive tested on standallone oc4j, ive tested on embeded jdveloper 10.1.2.1 !
i get NullPointerException at at oracle.jbo.server.security.jazn.JboJAZNUserManager.isUserInRole(JboJAZNUserManager.java:113)
the thing is that i can use isUserInRole() from request but i can not from application modulle....
...ive lost hours in decompiling and tracking down ADF code just to realize that there is no way to use custom login module with ADF because the thing is hard coded to use xml or ldap..
the only way i see how to solve the problem is to extend oracle.jbo.server.SessionImpl
and override
getUserRoles()
and
isUserInRole(String s)
i can substitute session class with my own by setting
SessionClass = oracle.jbo.server.ExtendedSessionImpl
in file jboserver.properties (which is inside bc4jmt.jar)
the easier way is to write my own function isUserInRole() in EntityImpl... i always can get user principal name with AppModule.getUserPrincipalName()
what do you think?
Similar Messages
-
LoginModule with JAAS, setup question for Frank Nimphius
Hi Frank,
i am trying to use a custom LoginModule in conjuction with the setup procedure in your "J2EE Security in Oracle ADF Web Applications" white paper. Have you done this before? can you provide roadmap for additional/alternate setup steps needed to use a LoginModule?
this is my original post from early this week:
JAAS Setup question
thanks,
brendenBrenden,
please refer to the OC4J security documentation which si a part of the Oracle Application Server documentation that can be looked up online here on OTN. Custom LoginModule configurations require OC4J 9.0.4. In addition, this feature also only works with the jazn-data.xml provider and not with OID.
From the perspective of this whitepaper, the LoginModule will be used by the OC4J container to authenticate users and thus should not require any change in teh paper.
I haven't yet had the time created an example and document that showcases how to do this. Hopefully christmas will give me some rest to look into this.
Frank -
Can Actions Menu of Interactive Reports work with Custom Authentication?
My testing is leading my to believe that Actions Menu do not work with Custom Authentication (but only work with APEX Authentication) in APEX 3.1.2? If that's true then is there a work around to this?
Just to clarify, I've posted/asked this question twice before:
1) Re: Actions Menu in Interactive Reports does not sort, filter, select cols etc
2) Interactive Report actions don't work for users (i.e. for non-developers)
But I've come to believe this is the main problem. I just don't know how to resolve/work around this?
Thanks for any help.I haven't setup a sample because my custom authentication is using LDAP authentication. I'm not sure how I can replicate that on the samples server?
I'm using LDAP authentication with a Page Sentry function. My further testing reveals that the Page Sentry function is setting the APEX variable user to NULL (ie blank) whenever there's any code in the Page Sentry function box. PL/SQL code as simple as
BEGIN return TRUE; END;
in the Page Sentry function box sets the "user" is set to <null>. When the Page sentry function box is left empty (no code specified) it sets the "user" properly after authentication against the specified LDAP directory.
What all this has to do with Interactive Reports...
It seems like when the user is NULL it messes-up Interactive Reports that are stored in the flows database. Although it shows the default report properly, but no runtime interactive actions (filtering, sorting, column break, etc.) work.
Can someone please correct or confirm this?
Thanks. -
What can I do when I have downloaded RAW plugin 8.7.1 and it wont work on either PSE 12 or PSE 13????
Hi I asked a computer engineer to install RAW plug in 8.7.1. on PSE 12 for me, and he couldnt do it either. I have bought PSE 13 and followed the advise I was given - go to Edit - expert - Help - plugins - RAW - update- and IT WORKS !!! DW
Original message----
From : [email protected]
Date : 25/01/2015 - 11:53 (GMTST)
To : [email protected]
Subject : How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
How can I get RAW pictures to open in PSE 12 and PSE 13? I have installed the plugin 8.7.1 but it wont work with either.
created by susanl96972449 in Photoshop Elements - View the full discussion
Hello, I have been experiencing similar problems and followed the suggestion and yes, the raw icon comes up as illustrated but there is nothing there to indicate any further action can be taken. So I am presuming that means it is installed and no further action required?
Here's my problem: I have had no problems getting my pics into my organiser in Elements 12 from either my Nikon D7100 or my Fujifilm X100S - until last week. Suddenly when they are imported all I see is the timer icons but they don't open to let me view them. If I click on one it will open and I can then edit it but it will not save an image onto the grid for me to view so it's really frustrating not being able to view all my photos in order to decide what to edit and compare them.
Here's what action I've taken so far - restarted the computer (endlessly), checked the updates and installed them, checked I have the latest raw plug in (I do) and gone into edit/update thumbnail (doesn't do a thing) - and torn out a fair amount of my hair. So anyone out there experienced this and can give me some advice? Please?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7129439#7129439 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7129439#7129439
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim
I bought an iphone4s before my carrier put my sim in it i updated itunes now wont work with my sim
Hello Aaron1658,
It sounds like you are unable to activate your phone with the SIM provided to you by your carrier. Try these steps in the following article to help you troubleshoot what it happening, named:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Symptoms
Your iPhone may display one of the following messages when you attempt to activate it:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
"The iPhone is not recognized and cannot be activated for service."
"iTunes was unable to verify your device."
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
If this is not what you are referring to, would you provide some more information about what is happening? Any error messages, prompts, etc.?
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Skype wont work with my mac os 10.5.8
afternoon, tried to download skype on my power book g4 and it after download I try to open the dm and it says wont work with this artitecture.
I am running 10.5.8 after I have download the dm the window that I should put it into the applications had like a do not enter symbol.
Thank you for your helpYour Mac is too old to run it.
http://www.skype.com/en/download-skype/skype-for-mac/
Click the system requirements on that page & you will see…
1GHz Intel processor.
Mac OS X 10.5.8+.
100 MB free disk space.
Either USB or regular headset if your Mac does not have a built-in microphone.
Download drivers if you are using an external webcam.
For voice calls recommend broadband connection with 100 kbps down / 100 kbps up.
For group video calling everyone on the call needs Skype 5.0 for Windows or Mac or higher plus webcams. For best quality we recommend you use a high-speed broadband connection of 4Mbps down/512kbps up and a computer with a Core 2 Duo 1.8 GHz processor. As a minimum you’ll need a high-speed broad connection of 512kbps down/128kbps up and a computer with a 1 GHz processor.
Your Mac has a Power PC processor not an Intel CPU.
See Skype's FAQ for more info…
https://support.skype.com/en/faq/FA34492/is-skype-for-mac-being-discontinued-on- mac-os-x-10-4-tiger-and-below-as-well-as-on-mac-devices-running-on-powerpc-archi tecture -
I bought a new ipad3 packed but after opening its box there are no headsets in it and iphone headsets wont work with iphone so is it normal I mean why there are no heas sets with ipad3 ?
Headsets don't come with the iPad. All you get is the iPad, USB cable and wall charger.
Since you're new to iPad ...
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
External isight wont work with imac g4
Hello,
I recently purchased a second hand isight camera using ebay.
I have an older imac g4 and the isight wont work with it at all.
I have scoured the forums on this topic and looked through all of EZ Jim's suggestions but I think my problem is a little bit different.
I'll explain exactly what happens and my troubleshooting so far...
The imac G4 is powered off, I plug in the external isight via firewire 400
The imac boots up into leopard 10.5.8 (using leopard assist)
In system profiler the isight is listed under the firewire tab.
( I can post system profiler info on this if its needed)
When I turn on the camera ichat launches, but then in the video tab it says no camera is connected.
Photobooth just has the no camera sign, but interestingly when ichat is opened photobooth says "camera off"
sometimes photobooth even lets me click the photo button, it counts down but then it doesnt take a picture... obviously!
Skype doesnt work.
I have an imac 24" running snow leopard 10.6.6 .... that also detects the camera but it won't work with any application such as skype or ichat.
I have tried (on my G4) unplugging my usb bluetooth module but nothing changes.
My G4 is connected via ethernet to an external router.
The firewire cable seems ok, I dont have any other firewire devices, but if it was a problem with the BUS or the cable then im guessing it wouldnt show in system profiler.
I am thinking the camera is probably damaged, but before I start a paypal enquiry I would like to see if it is just my computer or a setting i need to change.
(oh I used the application isight updater in core services but the install button is greyed out)
Any help would be amazing!!
Thanks!!!Well, about all you can do would be to try a different and known good
FireWire cable, as a replacement for what may be a defective FW400
cable that came with the iSight camera. The cable can be defective
with one bad wire, yet sometimes appear available to the computer.
• How to Troubleshoot iSight (note external vs internal)
http://support.apple.com/kb/ht2090
• iMac G5 (iSight), & Intel-based iMac: Using External video camera:
http://support.apple.com/kb/HT2819
If you know of someone with an older Mac without a built-in iSight
camera, to test that one on, this may be an OK idea. Not sure if you
could get any traction by taking the camera to an Apple Specialist
and ask if they could check it out for you; that may also cost you.
{And since your computer does not officially support Leopard 10.5,
the other avenues of support would probably not be open to you.
At least not with the old iMac G4 and an unsupported 10.5 install.}
I have an external iSight camera which was included with my G4 Mini
1.5GHz model, and that appeared to work OK with 10.5.8 at one point.
But I really have no need for it, since I don't use photobooth & so on.
And haven't tried that with my iMac G4 computers at all. No need to.
With a computer not equipped with an iSight camera, the Leopard 10.5
installation should still support the eventual addition of one; even if the
computer itself appears to not officially support a Leopard 10.5 install.
(You refer to Leopard Assist, a means to install in slower CPU Macs.)
The FW cable is about the most easy to consider at this point.
In the course of a year, I've found good replacement cables at
several places, even those at thrift stores in perfect shape, work
and I use them for FW external hard disk drives, primarily. To have
spares is nearly always a good idea. Test & keep known good ones.
I'm not certain how the external iSight FW camera may work on
a newer Intel-based 24" iMac with a built-in iSight camera, too.
Does your 24" computer have FireWire 400+800 ports? Can you
choose an external iSight camera and ignore the built-in one?
These secondary topics have probably been discussed in the other
forum area for Intel-based iMac computer models; if you chose to
try & use that camera with a model computer with one built-in...
• Apple - Support - Discussions: for Intel-based iMac
http://discussions.apple.com/category.jspa?categoryID=189
There is a possibility, if never tried and the iMac G4 computer was
acquired second-hand, that the FW port within it may be band; but
the cable is the first item since it is cheapest, in troubleshooting.
So, anyway, the hour is late here (1AM) so hopefully the matter
can be resolved with a known-good replacement FW400 cable.
You should not have to restart the iMac G4 (800?) model in order
to get a FireWire item to be recognized. It should appear in the
System Profiler's list under FireWire, such as things normally do.
Of course, the camera could be defective as well. Been some
time since they were available on sale, new from Apple...
You could ask around to find out if there is a way to use that
external iSight camera with your newer Intel-based 24" Mac
by someone having it ignore its own built-in camera; in a
way as to not affect its normal operation, that is.
Good luck & happy computing!
+{ edited 2x }+ -
Built in mic wont work with desktop version of skype
So i had skype already on the computer when i got it sense it had windows 8 well it just started to show that the skype i was using was going out of date so i decided to follow the link to download the desktop version now it wont work with my mic not sure if it a issue with microsoft end or skypes end. anyone got any ideas how to fix this problem?
Fault Module Name: iTunes.dll
That one often indicates a user-account-specific issue on the PC.
In the course of your troubleshooting to date, have you checked through the user-specific troubleshooting section of the following document?
[iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues|http://support.apple.com/kb/TS1717] -
Could not load the Multiprocessor Support module because it wont work with
Here is a strange error message, there are actually 2.
But they arent making PSE 8 unusable, just very annoying.
Here is the first one,,,,,,,,,
"Could not load the Multiprocessor Support module because it wont work with this version of photoshop."
When I open PSE 8, on my new Intel Mac, I get this message and nobody seems to know what the problem is.
My new Mac has 2 processors? Could that be what the message is saying?
But when I click the error message away, PSE 8 works fine.
There is another one too,
"Could not load the FastCore Routines module because it doest not work with this version of photoshop."
I just click it away and no problem, just a pita.
So if they dont effect it, I shouldnt worry, but my classmates are concerned.
Do you here have any idea what it is, and how to get rid of it?
There is info on the web about it, but no solutions.
Thank you,
JaneThis is interessting, as does my new Mac have 2 processors or 2 cores? I havent come across how this works yet, nor how to find it on my Mac.
Yes, I just found a site which explains it well,
http://macperformanceguide.com/Optimizing-Cores.html
I have one processor with 2 cores.
And the equivalent of the Task Manager is the Activity Monitor, where I see only one processor.
You sure explained this well! I now think we can find the problem, though its not effecting either my PS or PSE, its just an annoying message that I have to click away.
http://kb2.adobe.com/cps/407/kb407809.html
Is what Adobe tells us, this is for Windows, but it could apply to Macs?
I have tons of third party plug ins, and this problem is within the last month, and I didnt see the error messages before. Thats confusing, as I would have thought it would have shown up right from the start.
I just moved some of my plug ins, lets see if this changes anything, nope, but only one message appeared this time.
This will be fun to see what the real answer is! As I find out more, I will add it here.
Thank you,
Jane -
iPhone 4S. Swipe to unlock wont work can only swipe up for control pannel and camera but no buttons will work cant even turn off and on as it wont work. cannot restore iphone either as it wont let me.
Hey Angus97,
These are the recommended troubleshooting steps to take when you are unable to Slide to Unlock:
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
from: iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Welcome to Apple Support Communities!
All the best,
Delgadoh -
Discoverer Viewer/Plus does not work with Custom EUL owned by APPS user
I am facing a unique issue with one of my customers. They have a custom EUL named XX_EUL_US and this does not allow connecting through discoverer viewer or discoverer plus.
I have worked with custom EULS before at other customers and this was never the case. I am being told that this issue is happening as the EUL owner is APPS instead of some other user. Is this the case? Can discoverer viewer not be used with EULs owned by apps user?
Please not that the Default EUL in ICX profiles is set to this EUL and no other EUL profiles are set.
Appreciate any thoughts on this.Hi,
I am not sure what you mean when you say you have a "custom EUL named XX_EUL_US". The EUL table should be created in a schema named XX_EUL_US. This will then be the EUL owner. You will then need to connect to Discoverer Administrator as the EUL owner and grant privileges to Apps users and/or responsibilities.
The user should then be able to connect to Discoverer Plus/View using their apps username, responsibility and password.
To be able to connect directly from an apps menu you need to have the ICX parameters set correctly. The ICX: Discoverer Default End User Layer Schema Prefix should be set to XX_EUL (without the _US). The ICX: Discoverer End User Layer Language Override should be set to US or not set at all.
Rod West -
Hi Mark,
I own Adobe Creative Suite 5 Design Premium Upgrade and I bought the upgrade to Adobe Creative Suite 6 Production Premium but it wont work with my serial number what have I done wrong
MickMoving this discussion to the Downloading, Installing, Setting Up forum.
Aussimick you will want to enter in the qualifying serial number from the full version of Adobe software you purchased. You can find the serial numbers located under your account by following the steps listed in Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html. -
Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment
Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment
Hi.
This is definitely not supported, and I don't know that any work is scheduled in the future
to support this JDK on WLS 5.1.
Having said that, I was able to start WLS 5.1sp12 with JDK 1.4 with no errors. I didn't
exercise any features, however.
Regards,
Michael
Rakesh Gupta wrote:
Is there service pack available for weblogic 5.1 to work with JDK 1.4 for NT Environment--
Michael Young
Developer Relations Engineer
BEA Support -
Site list update not working with TED and Zenworks for Servers
Product: Zenworks for Desktops 7Sp1 and Zenworks For Server/TED 7Sp1HP5
Subject: Site list update not working with TED and Zenworks for Servers ,
all on Linux
Description: We have an exiting environment with 6 ZfS Servers and now we
brought up a new Server for another location. I configured all same as on
the other Server and the new one created all NAL-Apps at the new location.
But in the Application Site list on the golden App is this Application
missing. So I clicked on the Link up site list on the Distribution Screen
in C1. On ApplicationSite list the App from the new location is missing.
So I removed all and added the new from the new location and now i see all
in the application site list.When I install an app on the client on the
new location NAL is connecting alway th the same (wrong location-server
and i get an msi error 1612 or id=53272 with path=\Wrong serverpath to
file.
I looked on the other tab on C1 at the golden app an I see the backlinks
are going to all other servers without the new one. Software installation
on other locations are ok
RegardsAndreas,
I forgot to mention that you can also set the loging level on the Distributor and the Subscriber to 6. to do this at the Zenworks Server Management prompt type "setconsolelevel 6" if you want to capture this to the log file ted.log then use "setfilelevel 6"
Next delete the Distribution from the Subscriber and then re-push the channel.
What we are looking for here in the log is the creation of the object and the linking information about the gold object. it should look like this (not the failure part ;-))) )
In this excerpt you will see the entry
Golden App =
This should be were the link is to
You can check this both ways in the Golden App and in the Distributed Application.
Here is a log from me that shows this info as an example of what you should be looking for.
2008.05.29 03:35:41 [TED:Work Order In(yourserver.yes.com)] Receiving distribution: Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_YOURSERVER.BRN.FL.SUBS.SUBSCRIBERS.ZSM. GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Handle Event: Work order IN completed... Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
2008.05.29 03:35:41 [TED:Event Processing] Received (from haverhi-flbrn1.yesbank.com) Creating new application failed,
Subscriber Tree Name= YOUR-TREE,
Subscriber DN = SUBSCRIBER_HAVERHI-FLBRN1.BRN.FL.SUBS.SUBSCRIBERS.ZSM.GRS.CBH,
Golden App = SCRIPT-MS-HOTFIX.APP.BRN.ZENGOLD.GRS.CBH,
Attempted AppName = SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH,
error message: Failed creating SCRIPT-MS-HOTFIX.APP.BRN.HAVERHI.PALM.FL.CBH. With error message: Setting the trustee for BRN.HAVERHI.PALM.FL.CBH on the file "VOL1:\ZEN\UTILS" failed. Look in subscriber log file for more details..
Maybe you are looking for
-
Can you transfer iPhone 3GS to the 4S?
Does this article (http://support.apple.com/kb/HT2109) still work moving from a 3GS with IOS4 to a new 4S with IOS5?
-
I took pictures for work. I downloaded them to iPhoto, is there anyway to add the lats/longs now? Can it be done automatically?
-
How to tigger next screen in screen painter?
Hi friends i want to know how can i go to my next screen that is i want to know what should me my code in flow logic. I have one screen say 1000 in which i have entered my Empid- and password then it should go to next screen say 100 where i will have
-
Hi all, I want to access the .fmb file for the Suppler form in oracle apps. I can get the path from the 'About Oracle Applications' window of Help menu. In that path i can find only the .fmx files. Where can i find the .fmb file of that .fmx file???
-
How do I transfer Photoshop Elements 12 from my old laptop to new laptop?
How do I transfer Photoshop Elements 12 from my old laptop to new laptop? Also, I'd like to upgrade to Elements 13.