Hierarchy change, client reassignment and trustedrootkey

I manage a child primary site (mixed mode) with about 5000 clients. All the clients are pre-provisioned with the trustedrootkey flag.
There is no AD schema extension, we never use client push to deploy clients.
The clients get the MP from DNS.
In the next few months, I want to break the parent child relationship and have the child be a standalone primary before I plan the migration to SCCM 2012.
My question is what happens to the clients when I break the parent child relationship in this scenario. There is no AD for the clients to look up to.
As soon as my primary gets a new trustedrootkey will the clients be unmanaged?
Everything I've read tells me they will get assigned to the first MP that replies to their AD or DNS query or they go unmanaged.
Am I looking at agent deployments all over again?
Thanks

My question is what happens to the clients when I break the parent child relationship in this scenario. There is no AD for the clients to look up to.
As soon as my primary gets a new trustedrootkey will the clients be unmanaged?
Everything I've read tells me they will get assigned to the first MP that replies to their AD or DNS query or they go unmanaged.
Am I looking at agent deployments all over again?
1) Nothing will happened to the cleints
2) I will NOT get a new cert
3) That is not true. As long as they can continue to contact your primary server (MP) then will will continue to be managed.
4) Only if you want to. But you will have to deploy new clients for CM12.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Similar Messages

Client Copies and Currency Changes

Hi All,
Looking for some experience with client copies and currency changes. We have a source system that was created with EUR as the system currency (SCC4 setting). We are building a new system with an export of the source system. The target system will be USD (or one of several other currencies). The question is how do you resolve the currency differences? Is it possible to create a new client from a source client of a different currency? (i.e. SIDCLNT100 = EUR , SIDCLNT110 = USD). What type of conversion is needed and where in the process is it performed? Thoughts or comments on experience is greatly appreciated!!

Hi Lee,
You can do a client copy and create a specific client for the PI (formerly XI) and BI capabilities or just use client 001 for both.
Obviously the latter option is the easiest one.
The only benefit is that security might be easier with a separate client for each but that is a pretty weak argument in my opinion.
BTW: You can't share a client for PI/BI with an ERP client.
Cheers,
Mike.

How can I create a client console and work together with the Cache Server?

How can I edit the following Cache-Server.cmd file to create a client console and work together with the Cache Server?
The following is the cache server file: contacts-cache-server.cmd
@echo off
setlocal
if (%COHERENCE_HOME%)==() (
set COHERENCE_HOME=c:\coherence
set CONFIG=C:\home\oracle\coherence\Contacts
set COH_OPTS=%COH_OPTS% -server -cp %COHERENCE_HOME%\lib\coherence.jar;C:\home\oracle\
coherence\Contacts;C:\home\oracle\coherence\Contacts\classes;
set COH_OPTS=%COH_OPTS% -Dtangosol.coherence.cacheconfig=%CONFIG%\contacts-cache-config.xml
java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3 %4 %5 %6 %7
:exitEdited by: junez on 23-Oct-2009 09:20

Hi
To run the console, change DefaultCacheServer to CacheFactory
Paul

How to restrict user to change "Client" in sp01

Hi,
I have a requirement that must release my users to use sp01, but I want to restrict them to see only the spools in the logon client. Recently, they can change the "client" field in t-code sp01, is there anything I can do to disable "client" field from specific users ?
Diana

You can restrict through the object S_ADMI_FCD below mention activity
SP01     Use of SP01 (all users)
SP0R     Spool request management (all users)
SPAA     Spool administration (device administration)
SPAB     Spool administration (general settings)
SPAC     Spool administration (device type, character sets)
SPAD     Spool administration (all clients)
SPAM     Spool administration (cross-client job authorization)
SPAR     Client-specific spool administration
SPOS     Use of Transaction SP01 (all systems)
SPTD     TemSe administration (all clients)
SPTR     Client-specific TemSe administration
ST0M     Change trace switches
And you can restrict device also through the below mention object
SPODEVICE
S_SPO_ACT
S_SPO_PAGE
Provide the sp01 authorization as per your requirement

Different product hierarchy in sales order and in service order

Dear experts,
In VA03, I notice that
- under Line Item > Sales B, there is a field Product Hierarchy
- under Line Item > Account assignment, there is a field Order. From here, it links to a service order. In the service order, I can see a field Product Hierarchy too.
I would like to know if there is an implication when the field Product Hierarchy in sales order and in service order are different. Is it possible that this will cause an inconsistency?
Usually these two fields have the same value, since the value in sales order is copied from service order. However, in my case, the product hierarchy is changed/updated in service order, but not in sales order.

Hi,
We have document pricing procedure maintained at two levels for Sales order or Billing type.
The pricing procedure is determined based on SAles Area Customer pricing procedureDocument Pricing procedure+pricing procedure.
Example :For Sales Document type the document pricing rpocedure will be A and for billing type 'B"
Sales Area1A+Pricing procedure A
Sales Area1B+Pricing procedure B
Now A will be maintained in VOV8 and B will be maintained in VOFA.So two pricing procedures.
Regards,

Client dependent and client independent in ALE

I am going through pdf learning of an ALE scenario,i couldnot get wat is meant by client Independent and client dependent.
How can i conclude
Create message type (WE81){color:green} Client independent {color}
To create a new message type, follow these next few steps:
u2022 Enter transaction WE81 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Create logical message type)
u2022 Choose Create logical message type by double clicking on it
u2022 Click on change icon to enter change mode
u2022 Click on New entries to add a new type
u2022 Enter the required message type, in our case it is ZINVRV and an appropriate description
u2022 Save and exit.
Your message type has now been created. The next step will be to link it to the IDoc.
2.2.1. Link message to IDoc type (WE82 & BD69) {color:green} Client independent {color}
To link the message type to the IDoc type follow these next few steps:
u2022 Enter transaction WE82 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> EDI: Message Types and Assignment to IDoc Types)
u2022 Click on change icon to enter change mode
u2022 Click on New entries to create the link
u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
u2022 Save and exit
u2022 Enter transaction BD69 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Assign message type to IDoc for ALE)
u2022 Click on change icon to enter change mode
u2022 Click on New entries to create the link
u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
u2022 Save and exit
Your IDoc is now linked to your message type. We still need to link object types and add the message to the model before we can use the message.
2.2.2. Maintain object type for message type (BD59) Client independent
The ALE objects are used to create links between IDocs and applications objects, to control the serialisation, to filter messages in the customer model and to use listings.
For our own message type and IDoc you must maintain object types for the links.
If you want to check the serialisation for the message type, then you must maintain object types for the serialisation. If no serialisation object has been maintained for a given message type, then the serialisation will not be checked for this message type.
To add an object type to our message type, follow these next few steps:
u2022 Enter transaction BD59 (ALE -> Extensions -> ALE object maintenance -> Maintain object types)
DOC NAME: ALE_SCENARIO_DEVELOPMENT_PROCEDURE
Version 1 Page 6 of 16
ALE Scenario Development Guide
u2022 Type in your message type ZINVRV and press enter
u2022 Click on New entries
u2022 Enter your object type, LIFNR (We need to use the vendor as a filter object), the segment name where LIFNR resides, Z1INVRV, a number 1 for the sequence followed by the actual field name LIFNR
u2022 Save and exit.
You have now created an object that weu2019ll use as a filter object in the customer model to direct the flow of messages to the various logical systems based on the vendors in the filter of the message type ZINVRV.
We now need to add our new message type to the distribution model.
2.3. Configuring the Distribution Model
This task is performed on your ALE reference client.
2.3.1. Manual Configuration (BD64) {color:green} Client dependent {color}
To manually configure the customer distribution model, read the ALE configuration procedure, and follow these steps:
u2022 Perform the Maintain customer distribution model directly function. (ALE -> Distribution customer model -> Maintain customer distribution model directly)
u2022 Specify the customer model you want to maintain and the logical system that is to be the sender of the messages OR create a new model. (Create model ALE with logical system ALELS1C400)
u2022 Choose the receiving systems to which the sending system must forward message type ZINVRV to.
u2022 For each receiving logical system allocate the message type necessary for communication to the receiving systems as per ALE configuration procedure.
u2022 Create filter objects (in our case LIFNR as the object type with the associated vendor number, 0000018001 with leading zeros, in the object area) for the message types.
u2022 Save the entries.
Refer my query within color:green
Edited by: aditya sharma on Jul 14, 2010 12:57 PM
Edited by: aditya sharma on Jul 14, 2010 1:01 PM

A client is an independent business unit within an R/3 System, Data in the R/3 are classified as cleint-Dependent and client-independent.
Client-independent data such as ABAP Programs, R/3 repository objects throught the entire system. Other data is client-dependent. meaning, it can be viewed from one client. Cleint-dependent data includes customizing application and user data.
Eg.
Scripts are client dependent, means the changes done to SAP scripts in particular client will not be reflected in other client.
Smartforms are client independent, means changes done in one client will be reflected in all the clients.
Server : ECC6
Client : 100 , 200 , 300 , 400
Now suppose you have developed report in DV server client 100.
Then you will be able to see that in all clients.
Hence this is called as client independent. You can change anywhere and changes will be reflected to all ...
Now suppose you have developed a script in DV client 100.
You will not be able to see that in client 200 or 300 or 400 unless ytou copy that from client since it is client dependent.

How to improve client handover and roaming between AP's

Improving client Handover and roaming between APs
There are a few standards and methodologies available to use to improve handover of clients between APs. Most are focused on VOIP technologies, but it must always be remembered that we cannot control the client Handover (especially with legacy clients) we can only encourage them. Some Standards and methods work well for some environments and some do not - test the recommendations extensively before implementing in a live Production environment. It must also be noted that all settings take effect immediately once applied, however from a client perspective it might need to re-associate for the changes to take effect client side.
As with everything else in IT, if a perfect method/solution existed there would only be one - try them all and keep the best.
The Standards and Definitions
802.11k
IEEE 802.11k allows a device to quickly identify nearby APs that are available for roaming. When the signal strength of the current AP weakens and the device needs to roam to a new AP, it will already know the best candidate AP with which to connect to.
802.11r
IEEE 802.11r specifies fast Basic Service Set (BSS) transitions between access points by redefining the security key negotiation protocol, allowing both the negotiation and requests for wireless resources to occur in parallel.
When a device roams from one AP to another on the same network, 802.11r streamlines the authentication process. BSS allows a devices to associate with APs more quickly. Coupled with 802.11k's ability to quickly identify the target AP, BSS's faster association method may enhance application performance.
Handoff Assist
The AP monitors the RSSI for every associated client. If the RSSI for a specific client falls below "low-rssi-threshold" and continues to fall for the "rssi-falloff-wait-time", then the AP will send a de-auth to the client.
The de-auth is meant to kick the client away from the current AP and get it to re-authenticate to a nearby AP. This will have the effect of helping a client handover between 2 APs.
BUT (Big But), if the client gets de-authed and takes a while to re-authenticate (if it even does re-authenticate automatically after a de-auth), then this will have the effect of destroying communication instead of helping it -- mostly found with legacy clients.
Remove Lower Transmit Rates
Removing lower transmit rates is a way to promote better roaming, BUT not all clients respond well, or even respond to it.
The practice is that the basic rates are a subset of the transmit rates. If you only want to allow speeds 9 and up, you would select only the transmit rates of 9 and up, and the basic rates of 9 and 11. If a legacy client expects the rates of 1 and 2 it will not connect.
Local Probe Threshold
Local probe Threshold prevents a client from connecting to an AP with a too low a signal - helps more with initial connection than roaming.
The local probe threshold parameter is not supposed to force clients to roam as soon as they pass near an access point with a good signal, but rather to NOT hold on to an access point with a weak signal (avoiding sticky clients).
PMK Caching
Defined by 802.11i and is a technique available for authentication between a single AP and a station. If a station has authenticated to an AP, roams away from that AP, and comes back, it does not need to perform a full authentication exchange. Only the 802.11i 4-way handshake is performed to establish transient encryption keys.
Opportunistic Key Caching (OKC)
Is a similar technique to PMK, but not defined by 802.11i, for authentication between multiple APs in a network where those APs are under common administrative control. An Aruba deployment with multiple APs under the control of a single controller is one such example. Using OKC, a station roaming to any AP in the network will not have to complete a full authentication exchange, but will instead just perform the 4-way handshake to establish transient encryption keys
Implementation and Configuration
802.11k
802.11k is configured in your VAP profile. Tick the option to “Advertise 802.11k”. There after set the Handover Trigger Feature Settings.
Tick the “Enable Handover Trigger feature” and then set RSSI threshold by specifying the -dBm level at what the hand over trigger should be sent to the client
802.11r
802.11r is configured under SSID of your VAP profile. Tick the option to “Advertise 802.11r”
HandofF Assist
Station Handoff Assist is enabled in RF Optimization under the RF Management section of AP configuration.
Tick the “Station Handoff Assist” option to enable it, next set the Low RSSI Threshold – the threshold determines above what level no deauth gets sent
Lower Transmit Rates
Transmit rates can be adjusted in the Advanced tab of SSID under your VAP profile.
Remember that the basic rates are a subset of the transmit rates. If you only want to allow speeds 9 and up, you would select only the transmit rates of 9 and up, and the basic rates of 9 and 11
Local Probe threshold
Local Probe threshold can be adjusted in the advanced tab of SSID under your VAP profile.
Depending on the density of your APs consider values between 20 and 40 -- 40 being aggressive in an AP dense area.
Deny Broadcast Probes
Denying Broadcast Probes can cause problems with Roaming especially if the SSID is hidden – leave option disabled.

Hi, thank you for the helpful guidance. I have a basic question, if the device roam from one AP to another AP with the same SSID. Is there a need of re-authentication given a) the network uses EAP based authentication; b) the network uses MAC address authentication. If there is no need of EAP re-authentication, how the 802.11 keys are moved to the new AP. Thank you very much if you could help me clarify my thought.

Ability to change font size and font color thru console

I have a console that a client can pretty much do all the
changes they
want.. now they want to be able to change the font sizes for
certain titles
and also the color..
Since 95% of the site is controlled with CSS is there
something i can add
to the console page to allow them to change the size and
color of the titles
and text?
ASP, SQL2005, DW8 VBScript

Here's what I have done in the past. Maybe not elegant, but
it works. (I
use PHP, but I'm sure you can modify for ASP.)
In the HEAD of each web page, include regular old embedded
STYLE tags,
but INCLUDE an external PHP file:
<head>
<style type="text/css">
<?php include('styles/testcss.php'); ?>
</style>
</head>
Now in that included PHP file, just have CSS code which pulls
in your
dynamic data. Here's an example snippet:
body {
color: #600;
background-color: <?php echo
$row_recordset['bgcolor'];?>
Of course, you'll need the code for the recordset somewhere
too.
Alec
Adobe Community Expert

Problem with hierarchy change run in aggregates

Hi,
I have made changes in Cost center hierarchy (infact I have included 2 cost centers in a seperate node). After it I loaded hierarchy into BW through Process chain. Process chain uses Attribute/hierarchy change run process. Consequently Cost center hierarchy is loaded into BW successfully.
In Cost center master data, hierarchy table, i can see two new records for these added costcenters in Active status. It means hierarchy change has worked properly.
I have also read that hierarchy change run automatically reflects the changes in Aggregates, that are using Cost center info objects.
But my problem is I did not find new added cost centers in any aggregate using cost center info object. Though it should be taken care by Attribute/hierarchy change run.
Please suggest, if I make any change in source system hierarchy, then how and when it will impact aggregates ? How can I test that hierarchy change has impacted aggregates ?
Thanks and Regards
Saurabh

Hi Fede
Did you manage to solve your problem?
I have a similar situation where the technical ID of the hierarchy is set as default value for the hierarchy variable in the variable input screen.
I have noticed that if I un-check the option "Suppress 'Unassigned' Node" in the Hierarchy Attributes Settings in RSH1, then the default value is gone, but I would like to have it checked in order not to display the unassigned nodes for the end users.
Any help or comments on what you have done to overcome this problem would be jhighly appriciated.
Thanks.
Regards
Peter

Questions on Client Failver and Fast Failover

've few questions regarding Client Failover and Fast Faiolver of Oracle Database HA. Before I ask those questions I would like to explain my environment. Below are the details.
- We have two physical locations called 'ABC' and 'PQR'
- ABC is the primary site.
- PQR is the standby site.
- In ABC, we have Oracle RAC database (11.2.0.2) with two nodes.
- In PQR, we have a single server standalone database (11.2.0.2) with ASM. This is not a RAC.
- Data Guard has been configured between ABC and PQR and it is working as expected.
- Please note that we have a licence for Active Data Guard.
- We have Oracle Identity Management products at both ABC and PQR and they are going to use RAC database as a primary database which is in ABC.
- We did not configure Data Guard broker yet.
We want to achieve below goals:
Goal 1:
Whenever RAC primary goes down completely, standby database should become primary database AUTOMATICALLY and it should allow read/write operation.
I guess this is called 'Fast Failover'. Please let me know if I am wrong.
Questions :
- To make this happen, Do I need to configure Data Guard Broker so that standy database becomes primary when RAC goes down completely with planned or unplanned outage.
- Let's say RAC goes down completely, how long does Data Guard broker take to make standby db as Primary.
- What about the client/application who already connected to RAC.
- Let's standby DB has become as primary and after sometime if RAC comes back , Does data guard automatically changes the role of RAC to primary ?
Goal 2:
As I explained above, all Oracle IDM products and applications speak to RAC database they only know about RAC database which is primary.They are not aware of standby database.
- Whenever a client session is in progress with RAC primary database, if RAC goes down completely , we would like to expect client session should get transferred standby datbase without loosing session information . However before this happens, standby database should become primary becuase client session may perform write operations.
- Whenever a client is trying to connect to RAC prmary and assume RAC is completely down, we would like to expect client connections should get transferred to standby database.
However before this happens, standby database should become primary becuase client session may perform write operations.
As per my knowledge, above scenarios are called 'client failver'. Please let me know if I am wrong.
Questions:
1. Please throw some light to achieve above features.
2. As per my understanding, before client failover happens, fast failover should have already occured and standby should get switch to primary role. I guess all this happens through TIMEOUT parameters. What are those.
Could you please help ?
Thanks

859875 wrote:
Goal 1:
Whenever RAC primary goes down completely, standby database should become primary database AUTOMATICALLY and it should allow read/write operation.
I guess this is called 'Fast Failover'. Please let me know if I am wrong.You are correct.
>
Questions :
- To make this happen, Do I need to configure Data Guard Broker so that standy database becomes primary when RAC goes down completely with planned or unplanned outage.Yes (you can also use Grid Control that will use Data Guard Broker).
>
Goal 2:
As I explained above, all Oracle IDM products and applications speak to RAC database they only know about RAC database which is primary.They are not aware of standby database.
- Whenever a client session is in progress with RAC primary database, if RAC goes down completely , we would like to expect client session should get transferred standby datbase without loosing session information:This is not possible: it is possible only for SELECT statement and only in a single RAC database.
You can find some interesting documents on MAA home page (best pratices, case studies...):
http://www.oracle.com/technetwork/database/features/availability/maa-090890.html

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane.

Change the class and type in javascript or select statement of region

Application Express 3.2.0.00.27
I have a manually created tabular form where I need pk to be updatable or not not updateable depending on whether its a new record or not.
I am attempting this thru 2 different ways.
1st:
using decode in select statement of region:
SELECT decode(c001,NULL,APEX_ITEM.POPUP_FROM_LOV(15,c001,'AUTH_LOV',NULL,NULL,0,NULL,NULL,NULL,'YES','f15_' || '#ROWNUM#'),
apex_item.display_and_save(15,c001,'f15_'|| '#ROWNUM#')) authid,
apex_item.hidden(16, c002, NULL,'f16_'|| '#ROWNUM#') empid,
-- apex_item.display_and_save(16,c002,'f16_'|| '#ROWNUM#') empid,
apex_item.date_popup(17, rownum, c003, 'DD-MON-YYYY',20,2000,NULL,'f17_' || '#ROWNUM#')deldate,
apex_item.textarea(18,c004,5,40,NULL,'f18_'|| '#ROWNUM#') "Delegation scope",
apex_item.textarea(19,c005,5,40,NULL,'f19_'|| '#ROWNUM#')"Delegation limits",
apex_item.select_list_from_lov(20,c006,'YESNO_LOV',NULL,'NO','N','%','f20_'|| '#ROWNUM#')"ORA Signed",
apex_item.date_popup(21, rownum, c007, 'DD-MON-YYYY', 20,2000,NULL,'f21_' || '#ROWNUM#') "Del expiry",
apex_item.date_popup(22, rownum, c008, 'DD-MON-YYYY', 20,2000,NULL,'f22_' || '#ROWNUM#') "Date removed",
apex_item.textarea(23,c009,5,40,NULL,'f23_'|| '#ROWNUM#') "Delegation comments",
apex_item.POPUP_FROM_LOV(24,c010,'DELEGATION_LOV',NULL,NULL,0,NULL,NULL,NULL,'YES','f24_' || '#ROWNUM#') "Delegator",
apex_item.display_and_save(25,c011,'f25_'|| '#ROWNUM#') status,
-- apex_item.display_and_save(26,seq_id,'f26_'|| '#ROWNUM#') seq_id,
apex_item.hidden(26, seq_id,NULL,'f26_'|| '#ROWNUM#') ||
apex_item.checkbox(27, seq_id,NULL,NULL,':','f27_'|| '#ROWNUM#') chkbx
FROM apex_collections
WHERE collection_name = 'DELEG_COLL'
AND c011 IN ('O','N','U','D')
--order by c001However this approach yields this error when I try to pick a value from the lov:
Error: Can't move focus to the control because it is invisible, not enabled, or of a type that does not accept the focus.
My other approach is to attempt to change the type and class in javascript. I am trying this but I get an error when I attempt to change the class and type like this:
<script type="text/javascript">

</script>

not completely duplicate...here in this thread I am stressing what I am trying to accomplish and asking for help on the javascript side.

Change material type and valuation class

hi
my client want to change material type and valuation class in their production system. but the material no. and some transaction had done by this material. anything i need to concern? especially, in FI part. thank

Hey Changing of Material Type is one step
Changing of valuation class is other
and underneth that changing of account is another attached to the valuation class.
The basic requiremnt will be that client want to change the G/L code attached to the valuation class.
If you have already done some transaction it is not fininacialy right to move valuation classes.
Tell in detail what is the requiremnt.

What exactly is the diff between client dependant and client independant te

Hi gurus,
What is the diff between client independant and client dependant term.. I initially had a confusion related to client independant and client dependant Transport requests, where else are these words applicable, do they apply to data as well, if so how? any links to help me understand the difference..
regards,
kishore

Hi Kishore,
Client Independant: These objects are not specific to any client. And it is universal which can be viewed,changed across the clients.
Client Dependant: These are the objects can be viewed, changed for the client for which it has been assigned. Other clients do not have access on these objects.
In SAP, all objects are finally stored as tables. "Mandt" is key field which determines whether the object is client dependant or not.
Client Independant transport requests will make the transported objects available across the clients. and Client dependent transport request make the objects available only for the client mentioned by field "Mandt"
Regards,
Dinesh D

Changing WPA Username and Password

Hi Guys,
I am quite new to Wireless. would appriciate any help on this issue.
I am using a 891w as autonomous AP. I got some basic config from support forum.. Once configuration was done, i could see the SSID; but it was asking for username which i could not figure out. Here is the config below.
hostname ap
no aaa new-model
dot11 syslog
dot11 ssid WirelessNetwork
   vlan 1
   authentication open
   authentication key-management wpa
   guest-mode
   mbssid guest-mode
   wpa-psk ascii 7 cisco
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm
encryption mode ciphers aes-ccm
broadcast-key vlan 1 change 30
ssid WirelessNetwork
antenna gain 0
station-role root
interface Dot11Radio0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption vlan 1 mode ciphers aes-ccm
encryption mode ciphers aes-ccm
broadcast-key vlan 1 change 30
ssid Wirelessnetwork
antenna gain 0
dfs band 3 block
channel dfs
station-role root
interface Dot11Radio1.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface GigabitEthernet0
description the embedded AP GigabitEthernet 0 is an internal interface connecting AP with the host router
no ip address
no ip route-cache
interface GigabitEthernet0.1
encapsulation dot1Q 1 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address dhcp client-id GigabitEthernet0
no ip route-cache
cns dhcp
end
Please help me change the username and password for the SSID.
I hope in the able example the password is cisco.
Thanks you.

Hi,
This should be asking you only the password not the username as you have confired with wpa-psk. What client device are you testing this with? If this is wondows machine please choose your sececurity as WPA-Personal on the wireless profile and then it would asked for the Security Key..You will have to enter your password there. The password from the configuration i can see it as cisco.
wpa-psk ascii 7 cisco
Hope thats helos,
Regards
Najaf
Please rate when applicable or helpful !!!

Hierarchy change, client reassignment and trustedrootkey

Similar Messages

Maybe you are looking for