Hierarchy display problem in BW:BEX
Members,
I have an issue with displaying hierarchy in BEx. It is for a profit center hierarchy. The heirarchy is loaded for info object 0Profit_ctr, attribute change run is completed and it shows as an active hierarchy in maintain hierarchy settings. I checked the H table, I'm able to see the hierarchy values. In Bex for the InfoObj, I have selected the active hierarchy checkbox and the hierarchy name. I get a '#' symbol, which is basically a not assigned symbol. It is not that I want to suppress #, but I get the not assigned symbol for all profit ctrs, including the ones which belong to the heirarchy(standard).
Eg: #/1000002626 (i.e. hier/prctr).
I traced the flow for 0profit_ctr from Datasource to the Infoprovider, also the master data. If I try using a hierarchy to filter, no data is selected, it is the same case when I do it in Hierarchy attributes setting by level in the maintain hierarchies.But I have a lot of data(i.e. with many profit centers ) that belongs to that hierarchy.I tried using both variable and fixed hier.
Believe I'm missing something. Any help and pointers are really appreciated.
Thanks in advance.
Hi,
yes its diaplaying for all the levels in the query and upto only 6 levels in the portal.
is there any way to set the level of hierarchy in th WAD in the teamplate.
I have one query which is displayed in the portal. The Query has hierarchial selection criteria. I am executing the same query using analyzer. Its taking the variable from the selection and displaying it on the analyzer. I have used the option to " display the query on web " from the BEX query designer. From there its opening and displaying the results with the given selection criteria.
Where as when i open the query seperately in portal, its not displaying the results upto the entire level of hierachy ( only 6 levels are displayed
I came to know from one of my colleague that the porblem is with the Web item and the hierarchial variable declared in WAD was different from the variable declared in the BEX Query designer.
Pls advise on this ..
BR
Sherwin on behalf of a fren.
Similar Messages
-
Hi,
I've got a query driven from an organisational unit HR hierarchy. Unfortunately, neither way of presenting the information from the hierarchy is satisfactory.
The two options I know of are to have the rows showing as a flat structure, but org. unit displaying as a hierarchy, or have all the rows displayed within a hierarchy.
For example, with org unit as hierarchy, but the rows flat I'd get something like this:
Org Unit Grantholder GrantNo Sponsor Grant Value
University Prof X 441 Test Co. 100
442 TestCorp 75
Prof Y 443 Test Co. 120
Prof Z 444 TestCorp 80
Result: 375
Faculty Prof X 441 Test Co. 100
442 TestCorp 75
Prof Y 443 Test Co. 120
Prof Z 444 TestCorp 80
Result: 375
Res Sch Prof X 441 Test Co. 100
442 TestCorp 75
Prof Y 443 Test Co. 120
Prof Z 444 TestCorp 80
Result: 375
Dept A Prof X 441 Test Co. 100
442 TestCorp 75
Prof Y 443 Test Co. 120
Result: 295
Dept B Prof Z 444 TestCorp 80
Result: 80
There will be potentially thousands of Grantholders at University level through to dozens within a department. This approach becomes grossly unwieldly for a user.
The obvious way to overcome this is to show grantholders only within the node they are assigned by setting the entire set of rows to use a hierarchical structure:
Hierarchical Rows Grant Value
University 375
Faculty 375
Research School 375
Department A 295
Prof X 175
441 100
Test Co. 100
442 75
TestCorp 75
Prof Y 120
443 120
Test Co. 120
Department B 80
Prof Z 80
444 80
TestCorp 80
As the characteristics aren't laid out in labelled columns, the results are less clear and with even a small number of characteristics, drilling down within the hierarchy becomes a chore. Also, the BEx Analyser can't handle all the indents required for four levels of hierarchy and then a dozen characteristics.
I'm aware there are a few cosmetic options to play with, such as opening nodes above instead or below in the first example or defaulting open all nodes at a specified level in the second example, but none of those solve the core problems.
Ideally, the solution I'm looking for would produce the results shown below:
Org Unit Grantholder GrantNo Sponsor Grant Value
University Result: 375
Faculty Result: 375
Res Sch Result: 375
Dept A Prof X 441 Test Co. 100
442 TestCorp 75
Prof Y 443 Test Co. 120
Result: 295
Dept B Prof Z 444 TestCorp 80
Result: 80
(To be honest, to me this seems the most obvious way to present hierarchical data, so I find it surprising that it's not a standard option).
Another option might be if the org unit hierarchy can be split into separate columns:
Node 1 Node 2 Node 3 Node 4 Grantholder, etc...
University Faculty Res Sch Dept A Prof X
Prof Y
Dept B Prof Z
This is the approach used in the original versions of the reports that we're trying to re-create in BW. However, in that case, each org unit record held information for all its parent nodes and this isn't the case with the org unit hierarchy we get from SAP.
These reports will be delivered predominantly via the web.
Any suggestions for compromises would also be appreciated.
Thanks.Hi Vincent,
we came across the same problem. Moreover, the way the hierarchies are displayed interfere with our authorizations on the hierarchies. By giving detailed data on Root level, the user sees information that he is not entitled to see.
I am sorry that I cannot offer any help right now. Did you come across a solution in the mean time?
Regards
Catrin -
Error in BO Webi using Authorization analysis in Bex with hierarchy display
Hi Experts ,
When we run the WEBI report created on bex query which has 0comp_code restricted with characteristic variable of processing type Authorization and Not ready for input.
The hierarchy display is active in Bex (as we want to see L01, L02.... in webi)
The authorization analysis is working perfectly when I test in Bex analyser (at any drill down level).
But in BO webi, I get below error
The database error text is: The supplied XML is not valid. [char name & Level].
I dont get this error when I deactivate hierarchy display in Bex.
Also I dont get this error for user ids having 0BI_ALL
Please help me to resolve this.
Thanks
SavioHi Atul,
You can achieve this by dragging these two fields in the filter bar section of the webi. then apply variables on these fields.
hope it helps
Regards,
Rathy -
Variable hierarchy display not changed (BEx analyzer)
Hi
We have a BEx query, in which a drilldown characteristic is displayed as an hierarchy
Hierarchy display is active
Selected hierarchy:
Name - constant
Version - customer exit variable
Customer exit calculates version from manual input variable.
We need to view the report in BEx Analyzer.
When the query is opened, we select manual input variables and the hierarcy's version is set correctly.
The issue is that when we change manual input variables at runtime, the data is refreshed,
but hierarchy display is not changed. The selected hierarchy's version remains unchanged.
In order to change hierarchy display, we need to open characteristic properties and change the selected hierarchy manually
or we need to reopen the query and provide another manual input variables.
Our system version is 7.01 patch level 9
Is there any way to fix this problem
Or some workaroud?
Any help will be appreciated.
ThanksMichael, thank you for reply.
But I don't see how these notes may help me with my problem.
1753959 - I don't get a short dump
1745472, 1751321 - system displays all queried nodes, the problem is that if I input another variable, hierarchy version variable is calculated via user-exit properly (I see it in ABAP debugger), but displayed hierarchy has version, which was set when I opened query initially.
1717433 - nodes are returned with non-empty result. I can see that data is refreshed, hierarchy version is requested correctly, but is displayed incorrectly. We can see, for example, new hierarchy leaves, but in "n/a" node.
I tried to run the same report on system with version 7.01, patch level 12 and get the same behaviour.
My problem is similar to that described in notes 993151, 957219, but our system patch level is already higher. -
i tunes not working and the problem its displaying is
m signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.5.3.3
Application Timestamp: 4f14cc3d
Fault Module Name: QuickTime.qts_unloaded
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 4cf45322
Exception Offset: 706e1040
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
please help.im having this problem to ive uninstalled and installed but this still comes up!!
Problem signature:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.7.0.21
Application Timestamp: 504d85d9
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00000000
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 5129
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 -
BEx Exceptions Display Problem
Hello,
I have next problem with displaying my exceptions in BEx query:
I have 2 visible keyfigures in columns in my query: A and B. I need to build my exception condition on the A one's data and I need to colour a column under the B one.
But when I execute the query I get filled cells under the B keyfigure, but the condition is applied to the B one also. I need help on this question.
My exceptions settings:
General bookmark:
"Exception is active" is selected
Condition: Bad if >0 and <1
Definition bookmark:
KeyFigures - B,
"Before List Calculation" is selected
Display bookmark:
"Exception Affects Data Cells" is selected
Key Figures - A
"Characteritic Cells" is not selected
Cell Restrictions bookmark:
"Exception Affects Everything" is selected
I have BI Addon 7.x (based on 7.10) Support Package 9 Revision 614
NetWeaver Patch Level:
SAP_ABA 700 19 SAPKA70019
SAP_BASIS 700 19 SAPKB70019
PI_BASIS 2006_1_700 9 SAPKIPYM09
SAP_BW 700 21 SAPKW70021
FINBASIS 600 16 SAPK-60016INFINBASIS
SEM-BW 600 16 SAPKGS6016
BI_CONT 703 14 SAPKIBIIQ4
Thanks in advance,
DzmitryHi.
If your B key figure is calculated using value of A key figure you can do the following:
Suppose, B and A key figures have dependency like
B = 2 * A + 1
Since A must lie in (0, 1), then B must lie in (1,3) when A takes values from interval (0, 1),
that is now you should
replace condition:
Bad if >0 and <1
to
Bad if >1 and <3
and apply it to column B only. ( Definition tab, Exception is defined on field ). -
Hierarchy display in BEX is confusing
I am having an issue with the customer group hierarchy display in BEX:
In RSA1 hierarchy display like this
Customer group 1
--Customer A
--Customer B
--Customer C
In BEX (restricting characteristic or variable selection for 0customer/0sold_to) it displays:
Customer group 1
--Customer group 1
--Customer A
--Customer B
--Customer C
It confuses the users as to which is the correct Customer group 1 node to select for the queries. I could not find any setting that may control this behaviour.
This is a time dependent hierarchy. We are in 3.1c
Any help is much appreciated.
JoeHi,
set the properties of your characteristic
Values of posted nodes to hide
http://help.sap.com/saphelp_nw04/helpdata/en/1a/25213c9cffa027e10000000a11402f/frameset.htm
Regards
Heike -
In a report we are using orgunit hierarchy and we have another field in the report Manager name (manager of the orgunit). Currently at the top level of the hierarchy all managers are displayed for every node under it. Example
Level 1
Org 1----Manager 3
Manager 2
Manager 1
Level 2
Org 2-----Manager 2
Manager 1
Level 3
Org 3----Manager 1
Is there a way to only display Manager 3 for Org 1 and Manager 2 for Org 2? We thought about compounding orgunit with manager but we could run into an issue with time dependency. Any other suggestions without removing the hierarchy display?Not sure if this fits your situation or not, but look in orgunit and see if there is a manager in there already (if not you can customize it and add it in). Then you can display the orgunit on your report and then also display the orgunit's manager attribute.
You are displaying the manager and orgunit from transaction data. This manager could be the employee's manager, cost center manager, orgunit manager, etc...
Brian -
Problem while opening Bex query on the web
Hello BW experts,
I have a problem while opening Bex query from my SAP Favorites.See below.
When i double click on the query, i get the following page, with the server name KBWS01QX.
But, from RSRT Tcode, select the query > query display as HTML > Click on ABAP Web , click execute as shown below, it is going to the correct URL as in the 2nd screen shot below.
My question is why is it going to the wrong URL when i open it from SAP Favorites menu?
I want it to open the same URL as it opened from RSRT(which is the right one)
What is the Config needed to make it to work from SAP favorites.
Any help would be appreciated.
Thanks alot.
SVHello,
Thank you all for your responses.
See below some additional info.
From RSRT, this time I clicked on JAVA WEB, and i get the below URL, which is the same URL i was getting when i executed the query from SAP favorites.
http://kbws01qx.xxxxxxx.com:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCONSUMPTION
Also, i have executed the Function module : RSBB_URL_PREFIX_GET and i get the below values.
It seems that it is trying to connect to Java portal something services may be, but i want it to open in ABAP web only.
Please help. -
Problem with a Bex Query Report with Web Intelligence
Hello!
I have a Bex query (with query Bex version 7.0) I'm connecting with Web Intelligence (4.0) but one of the attributes instead of displaying the description shows only the key, and it is strange because other cubes if given by the conversion.
I wonder if there is a solution for this or if it is a problem of version 4.0 of Web Intelligence.
I await your response,
Greetings!Hi,
Whereabouts in the application are you seing this problem? (in the query panel conditions, in the prompt list of values, or in the table block? )
also, what do you mean by "and it is strange because other cubes if given by the conversion" ?
it's worth noting that the "key and text display properties" in the Bex Query Designer do not influence webi. WebI consumes the global infoobject property from BW RSH1.
Regards,
H
p.s. if you need to understand which features are or are not supported with BI 4.0 tools, please look here: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d056e1bc-2794-2e10-959e-8779c5623cc5 -
Erro in Hierarchy Display in Crystal Report 2008
HI Experts,
I have connected MDX Query with Crystal Reports 2008. In my MDX Query, I took G/L Account as an Info-object Hierarchy in which there are more than 10 nodes and each nodes having G/L accounts range. When i tried to create a crystal report from MDX query, in G/L account field i am not getting hierarchy but all G/L accounts comes together.
How to get hierarchy of an infoobject in crystal report ?
Regards,
Rishit KamdarHI,
to get or find an answer/solution about your question/problem?
I planning also to use Hierarchy Display in CR. And it is very interessting for me to know if that is working.
Thanks
Andreas -
Wierd lines on my display and frequent lock-ups w/ and w/o display problems
When booting I sometimes get weird lines and blocks on my display (the GRAY Apple screen) and then it hangs, other times the computer will boot and run fine for 20-30 minutes and then the display goes wonkers with blocks and lines and the computer does not respond. The only way I can get it to boot is to reset the PRAM by letting it CHIME 3x and then occasionally it will boot without issue and run, while other times I still get the blocks and lines on the display.
When I am able to get it to recover and re-boot after the lock-up and display problems and occasionally the box in the middle asking me to re-boot similar to a kernel panic the OPS gives me the option to REPORT the error and here is the error for others who would know more...
Thank you in advance,
Darren
Interval Since Last Panic Report: 104960 sec
Panics Since Last Report: 5
Anonymous UUID: 7D1AEF43-7E19-4F58-A1E0-48FA992A2814
Wed Nov 18 15:49:50 2009
panic(cpu 0 caller 0x9cdb10): NVRM[0/1:0:0]: Read Error 0x00009410: CFG 0xffffffff 0xffffffff 0xd2000000, BAR0 0xd2000000 0x5d3e2000 0x084700a2, D0, P1/4
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x5c99b7d8 : 0x21b2bd (0x5cf868 0x5c99b80c 0x223719 0x0)
0x5c99b828 : 0x9cdb10 (0xbb7fec 0xc209c0 0xbc3660 0x0)
0x5c99b8c8 : 0x147690d (0x8b5ac04 0x7edf004 0x9410 0xabd962)
0x5c99b908 : 0x1534e6a (0x7edf004 0x9410 0x5c99b968 0x9)
0x5c99b948 : 0xb51ca5 (0x7edf004 0x91ed004 0x0 0x0)
0x5c99b968 : 0xac155b (0x91ed004 0x5c99baa4 0x0 0x0)
0x5c99b9b8 : 0x145f290 (0x7edf004 0x3d0900 0x5c99baa4 0x0)
0x5c99bad8 : 0xab2821 (0x7edf004 0x91cf004 0x815200c 0x200)
0x5c99bb18 : 0xb1f172 (0x7edf004 0x91cf004 0xeb9bcc0 0xeb9bc04)
0x5c99bbc8 : 0xb202db (0x7edf004 0x91f0404 0x0 0x0)
0x5c99bc58 : 0x14bb7a3 (0x7edf004 0x91f0404 0x9 0x2)
0x5c99bd68 : 0x14ed407 (0x7edf004 0x91cf404 0x0 0x0)
0x5c99be98 : 0xad3934 (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bec8 : 0x9d61fb (0x7edf004 0x91ca404 0x0 0x0)
0x5c99bf08 : 0x5491b5 (0x0 0x9499680 0x1 0x29c50a)
0x5c99bf58 : 0x5481e6 (0x9499680 0x1 0x5c99bf88 0x547d9d)
0x5c99bf88 : 0x548640 (0x8abaf00 0x7e9ecc0 0xe780850c 0x2a6e5f)
0x5c99bfc8 : 0x29d68c (0x8abaf00 0x0 0x10 0x88bbfc4)
Kernel Extensions in backtrace (with dependencies):
com.apple.nvidia.nv50hal(6.0.6)@0x136b000->0x17f1fff
dependency: com.apple.NVDAResman(6.0.6)@0x96f000
com.apple.NVDAResman(6.0.6)@0x96f000->0xc21fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
dependency: com.apple.iokit.IONDRVSupport(2.0)@0x961000
dependency: com.apple.iokit.IOGraphicsFamily(2.0)@0x943000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10C540
Kernel version:
Darwin Kernel Version 10.2.0: Tue Nov 3 10:37:10 PST 2009; root:xnu-1486.2.11~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
System uptime in nanoseconds: 3788331456483
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0xf02000, size 0x12288) - last unloaded 94521475551
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 2.2.2
org.virtualbox.kext.VBoxNetFlt 2.2.2
org.virtualbox.kext.VBoxUSB 2.2.2
org.virtualbox.kext.VBoxDrv 2.2.2
com.bresink.driver.BRESINKx86Monitoring 5.0
com.pctools.iantivirus.kfs 1.0.1
com.apple.driver.AppleHWSensor 1.9.2d0 - last loaded 31800108689
com.apple.filesystems.ntfs 3.1
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleHDA 1.7.9a4
com.apple.driver.AirPort.Atheros 412.19.4
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.2
com.apple.driver.AppleIntelMeromProfile 19
com.apple.driver.ACPISMCPlatformPlugin 4.0.1d0
com.apple.driver.AppleLPC 1.4.9
com.apple.driver.AppleBacklight 170.0.14
com.apple.driver.AppleUpstreamUserClient 3.1.0
com.apple.GeForce 6.0.6
com.apple.driver.AppleUSBTrackpad 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.iokit.SCSITaskUserClient 2.6.0
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.0
com.apple.iokit.AppleYukon2 3.1.14b1
com.apple.driver.AppleAHCIPort 2.0.1
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleIntelPIIXATA 2.5.0
com.apple.driver.AppleUSBHub 3.8.4
com.apple.driver.AppleFWOHCI 4.4.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBUHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagementClient 96.0.0
com.apple.driver.AppleIntelCPUPowerManagement 96.0.0
com.apple.driver.DspFuncLib 1.7.9a4
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IO80211Family 310.6
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOBluetoothSerialManager 2.2.4f3
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.IOAudioFamily 1.7.2fc1
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.9a4
com.apple.iokit.IOHDAFamily 1.7.9a4
com.apple.iokit.AppleProfileFamily 41
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 4.0.1d0
com.apple.nvidia.nv50hal 6.0.6
com.apple.NVDAResman 6.0.6
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.CSRUSBBluetoothHCIController 2.2.4f3
com.apple.driver.AppleUSBBluetoothHCIController 2.2.4f3
com.apple.iokit.IOBluetoothFamily 2.2.4f3
com.apple.iokit.IOUSBHIDDriver 3.8.4
com.apple.driver.AppleUSBMergeNub 3.8.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOATAPIProtocolTransport 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.0
com.apple.iokit.IOAHCIFamily 2.0.2
com.apple.iokit.IOATAFamily 2.5.0
com.apple.iokit.IOUSBUserClient 3.8.5
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBFamily 3.8.5
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.16f11
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 128 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), Atheros 5416: 2.0.19.4
Bluetooth: Version 2.2.4f3, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: ST9320421ASG, 298.09 GB
Parallel ATA Device: MATSHITADVD-R UJ-857E
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x021a, 0x5d200000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
Anyone know what is causing my problems? I thought it was heat so I downloaded a CPU and FAN temperature monitor and the CPU was getting VERY HOT at first so I then ramped-up the CPU FAN SPEED to maximum - it turns out the CPU FAN was not rotating well at low speed - since then I have cleaned and checked the fans and they all work as they should and blow on high(er) when the CPU temperature is above a certain level.S.U.
Is there a kb article or something that would illuminate what to look for in these logs, or is it a matter of learning by osmosis?
Both. I am not skilled in reading logs. It is a very technical and time consuming task for the uninitiated (me!) In scanning a log I look for the backtrace and loading dependencies. The first item in the backtrace is usually the roadblock.
Beyond that you can look at the Technical Note TN2063: Understanding and Debugging Kernel Panics
Should make for good bedtime reading. Puts you right to sleep.
c -
Display Problem with RowHeader of a Scroll Pane
Hi,
I am trying to display row headers for a table using another table
Here is the code
import javax.swing.*;
import javax.swing.table.*;
public class RowNumberHeader extends JTable {
protected JTable mainTable;
public RowNumberHeader(JTable table) {
super();
mainTable = table;
setModel(new RowNumberTableModel());
setRowSelectionAllowed(false);
JComponent renderer = (JComponent)getDefaultRenderer(Object.class);
public int getRowHeight(int row) {
return mainTable.getRowHeight();
class RowNumberTableModel extends AbstractTableModel {
public int getRowCount() {
return mainTable.getModel().getRowCount();
public int getColumnCount() {
return 1;
public Object getValueAt(int row, int column) {
return new Integer(row + 1);
}and then
JTable displayTable = new JTable(...);
scrollPane = new JScrollPane(displayTable);
JViewport jvp = new JViewport();
jvp.setView(new RowNumberHeader(displayTable));
scrollPane.setRowHeader(jvp);the problem I have is that when a row is selected inside the row header, some rows go blank and you can see the selection is all screwed up. I tried setting the selection mode to ListSelectionModel.SINGLE_SELECTION but that didn't help.
A refresh of the entire screen (minimize/maximize) seems to resolve the problem. I am using jdk1.4.1 in Windows 2000.
Any ideas?
SylvainAgain the problem is that when you click on the row headers, some row header rows go blank (completely white) so you can't see what they show.
ie say I have table
Row 1 - 1 2 3
Row 2 - 2 4 5
Row 3 - 5 7 7
Row 4 - 5 6 7where Row X is the row header. So for example, if you click on Row 2, you will get something like
Row 1 - 1 2 3
Row 2 - 2 4 5
- 5 7 7
Row 4 - 5 6 7until the screen is refreshed or you click some other row header.
hmm ok, I added calling repaint on the table whenever a row is selected and at least the display problem goes away; however, the selected indexes from the event don't always match the index of the row selected. I think actually that may be the source of the display problem.
Here is the code I added in the constructor:
getSelectionModel().addListSelectionListener(new ListSelectionListener()
public void valueChanged(ListSelectionEvent e)
System.out.println("Header table selection is: First = " + e.getFirstIndex() +
" Last = " + e.getLastIndex());
RowNumberHeader.this.repaint();
}); -
Macbook and HP 2510i monitor display problem - help
Hello,
I am having display problem with my Macbook (Intel) and my 25'' HP 2510i monitor via DVI.. Until last monday I do not have any problems and my monitor was working flawless with my macbook.. Last monday I used the monitor with my HP Notebook to try Windows 8 on large screen. And after that try when I connect the monitor back to Macbook there is no display.. I tried the steps below
- I connected Macbook to my Phillips Plasma TV and it worked (no error with display card of Macbook or the wire or the adaptor)
- I connected the monitor back to HP laptop it worked.. (so no error with the monitor)
- I unplugged monitor to cut electricity and tried.. nope not working
- I did several tricks with macbook no effect
- I reinstalled Mountain Lion .. no effect
- I formatted Macbook, reinstalled Snow Leopard.. Not working.. I installed back Mountain Lion .. not working
Whatever I tried the HP2510i is not displaying, mirroring my Macbook..
Any help will be appreciated
ThanksMy graphic card details;
NVIDIA GeForce 9400M:
Chipset Model: NVIDIA GeForce 9400M
Type: GPU
Bus: PCI
VRAM (Total): 256 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0863
Revision ID: 0x00b1
ROM Revision: 3462 -
When I try to open Quicktime I get a message saying it has stopped working. The error message says:
Problem Event Name: BEX
Application Name: QuickTimePlayer.exe
Application Version: 7.73.80.64
Application Timestamp: 508900dd
Fault Module Name: QuickTimePlayer.dll
Fault Module Version: 7.73.80.64
Fault Module Timestamp: 508900c0
Exception Offset: 00005b6d
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 3081
Additional Information: 9da7
Additional Information 2: 9da7586a62744150d954cf6a5ec876d1
Additional Infromation 3: db4f
Additional Information 4: db4f7e51c3cffddbf929f5acfefa97e3
Similarly, when I try to play media on iTunes, or when my iPhone is backing up, I get a message saying iTunes has stopped working with the error:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 11.0.1.12
Application Timestamp: 50c8fc7e
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0800a3bc
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 3081
Additional Information: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: Same as 2We'd better check to see if some other application has stashed old versions of QuickTime componentry down in your system files.
So we'll go looking for the older QuickTime componentry in the most common locations for it to be stashed.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
If you have a 32-bit version of Windows, open the "System32" folder.
If you have a 64-bit version of Windows, open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)
Maybe you are looking for
-
MOVED: MSI Neo2-P network cable unplugged
This topic has been moved to Off-Topic Technical. https://forum-en.msi.com/index.php?topic=96663.0
-
Is there a way to play to 2 blue tooth devices at the same time?
is there a way to play to 2 blue tooth devices at the same time from my ipad?
-
Error in converting character string to smalldatetime data type
I've installed SQL Server 2000 on my new laptop and Crystal Report XI, out of sudden, the Crystal Report to certain view can't run and I got the following error: Details: 22007 [Microsoft][ODBC SQL Server Driver][SQL SERVER]Syntax Error cnverting cha
-
Use Previews not working in CS6 Mac
It was working in 5.5, but appears to be broken for CS6. I just rendered a spot using MB Looks on an adjustment layer. Took 6 minutes. I then immediately exported the sequence, and it took 6 minutes. My past experience is that the export should h
-
I had to switch to the Chrome browser because Safari has too many issues with Mountain Lion or Retina on my new $4000 Macbook Pro! It gets stuck in the middle of loading sites like eBay or even Google News. Half the screen shows and the other half is