Hierarchy extractor for FICO

Hi Experts,
I am trying to create an extractor for cost center group hierarchy (transaction code KSH3) and cost element group hierarchy (transaction code KAH3) from R/3 so that this hierarchy will be populated into BW data source. I am using transaction code RSO2 to create the generic datasource and I from what I understand, extraction can be done using DB view, SAP query or function module. And the function module is chosen because this is a hierarchy that I need to extract.
Please advice on how do I about this.
I have searched the internet and I have found some of examples given using function module PHIE_HIERARCHY_CATALOG and PHIE_HIERARCHY_TRANSFER. Is this function module only can be use when extracting HR related hierarchy? Because my requirements is to extract from cost center and cost element groups which falls under FICO module.
Your reply is very much appreviated.

Try the SAP delivered 0COSTCENTER_0101_HIER for cost centers and 0COSTELMNT_0102_HIER Cost element
pts appreciated.

Similar Messages

Extractor for FICO (Internal Order)

Hi Gurus,
I was wondering if you happen to know any extractor that can capture transaction that uses Internal Order? in FICO..I can't seem to find one. Thanks in advance.
- Kit

Hi Kit,
Internal Order in FI will be collected in BSEG table( AUFNR is the field).So based on this table i hope there is no standard DS.
For your Info :
The following link will provide you the source tables for SD,MM&FI Extractors ;
http://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
Regards
Ram.

Extractor for Product Group/Member Allocation- hierarchy (table u2013 PGMI ).

Hello experts
I am looking for standard extractor for Product Group/Member
Allocation- hierarchy (table u2013 PGMI on the ECC).
Is there a standard extractor for product group-hierarchy?
Best Regards,
Tal Shalom.

Hi Lory,
I thought the document contained an explanation of remote key mapping. Obviously it doesn't, sorry.
Setting up remote key mapping is a bit complicated.
First of all go to the MDM console and check your product category field in the main table (catalog items). Is key mapping set to "yes"?
then go to the data manager and switch to the table containing the product categories in record mode. Right click on any entry and check the remote key data. Are remote keys available for your product categories. I assume that there are no remote keys available - this is the reason the system behaves as you describe it.
Setting up remote keys for existing product categories AFAIK can only be done manually in Data Manager. Alternatively you can delete your hierarchy and create it once more, creating remote keys for every entry in the table. You can chose any remote system, it just has to be the same all the time.
In import manager you have to clode the code field of your product category (basically the material group number) and assign it once to the product category in MDM and once to the remote key.
Be sure to check your configuration in MDM Import Manager, the entry "Do not update record matching field value" needs to be set to no. Otherwise no remote keys are created.
Now you can import your categories creating your hierarchy, as usual. The remote keys are created automatically.
You should assign remote keys to all fields that should be matched in a similar way, UOM, currency etc.
Hope you could follow this brief version.
Best regards,
Marcus

Generic hierarchy extractor

hi,
I have to extract hierarchy from R/3 system where there is no standard extractor. I found the table for the extractor. From that table, i have to select only certain fields(5 out of 10 fields) and extract it to BI system as hierarchy. So, for this, i am thinking of creating a custom hierarchy extractor. Please advise how we can create custom hierarchy extractor.Also, let me know if there is any other way to get this hierarchy into BI system.
Thanks in advance....

Hi,
We cannot create a generic hierarchy & use in BI, as in RSO2 there is no feasibility of creating a generic extractor for hierarchy.
you can opt for a flat file as a source to load hierarchy in BI.
Or you can take functional team help in creating a hierarchy in R/3 & use it.

CO-PA generated extractors for custom characteristics

Hi, gurus!
I have user-defined (transaction KEA5) characteristic WWVD in CO-PA. This char. has some values defined (transaction KES1). Values grouped in user-defined hierarchy (transaction KES3). Characteristic WWVD used in some Operating Concern. When I generate CO-PA extractor for the Operating Concern, I got generated extractors for characteristic WWVD - 0G_CWWVD_TXT. Everything is fine.
Question: is there any way to generate extractor for user-defined hierarchy for characteristic WWVD? or I should create it by myself as generic datasource or somehow else?
Thanks,
Andrew.

hi andrew
u can use link to see document on How to COPA.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how to co-pa extraction 3.0x
hope it helps.
assign the points if it works.

Step by Step for FICO(GL,Assets and CO) Extraction

Hi gurus,
I am trying to see if i can get a step by step extraction process for FICO extraction cos am abt to start a project to extract and load GL,Asset and Controlling data into a BW system.I am thinking I shd be able to get a lot of the reports needed by installing the 0FI_GL_4.
Please any help will be appreciated and points will be awarded as well.

please search the forum before you post a thread, there are lot of threads discussing the same topic.
coming to steps in extraction:
install DS
replicate DS
create transformation between the DS and DSO
the same applies to DSO and cube.
But most of the times, no delivered DS supplements the clients finacial requirement, so if thats the case you would need to enhance the DS with the additional fields that would be needed in the reporting stand point

Extractor for PM process orders

Hi Experts,
We are looking for a PM extractor for process orders, this is to get component information (material details), we found 2LIS_04_P_MATNR but it's limited to production orders only, also tried filling setup tables for this extractors but not fetching process orders at all.
http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htm

Is there any clues?

Is there any standard extractor for AFD provided by SAP?

Hi.
We are planning to implement SEM-BCS ? From this forum and SAP documentation( help.sap.com and service.sap.com), I just found that integration with ECC is total records(RFD) and some master data. Unfortunately, I could't find any further integration point. AFD such as inventory balance, Gross profit etc seems to be extracted from ECC such as FI, MM or CO module. But there is no mention in SAP documentation.
I think I missed good integration point SAP provided.
Otherwise, We have to develop the some program to extract AFD. Is my understanding correct?
Is there anybody who has experience to extract AFD from ECC with standard extractor or CBO program?

The main problem with automatical load of AFD is the strict dependence on the ECC/R/3 configurations that might differ very significantly.
So, there is no standard extractors for AFD.
IPI - I used to figure out the ways of calculating the figures needed for IPI with non-standard functionality. And understood that even with a standard functionality the task of extracting the proper values are not esy at all.
IPA - there are so much data that needed to be entered for IPA, plus FI-AA configuration depends on implementation...
CoI - the most of data for it is accessible in ECC, even in RFD.
So, forget about the standard and easy way of extracting the data needed. Try to examine the configuration of modules you are interested in, and find the ways to extract the data.

BW Extractor for FS10N Repot

Hello all,
I have seen few threads on BW extractors for FS10N report.
I would like to know which is the best BW extractor to use for FS10N report.
Is it 0FI_GL_4 or 0FI_GL_10 or 0FI_GL_1? Could anyone please suggest.
Thanks,
Praveen Tati

Thank you Murali.
The table FAGL_ACTIVEC has no entries in ECC. I assume it is not active.
I will use 0FI_GL_4 extractor and enhance as per the requirement.
Could you please tell me what setting I need to do to get latest delta's when I run data load from BW?
I understand that I need to do some settings in tables BWOM_SETTINGS, BWOM2_TIMEST.
Thank you very much.
Praveen
Edited by: Praveen Tati on Jun 17, 2011 11:12 PM

Can I have TWO Extractors for ONE InfoObject ???

Hi all,
We have two extractors (Business Content & Generic Extractor for 0WBS_ELEMT_ATTR). Can we have these TWO extractors for 0WBS_ELEMT InfoObject. If yes, can I have the procedure, PLEASE ?
Thanks.

Hi Venkat,
You can try to use Flexible update. For this you will need to make your InfoObject an InfoProvider. See here for an example:
http://help.sap.com/saphelp_nw04/helpdata/en/87/3fdf9587f211d5b2ff0050da4c74dc/content.htm
Hope this helps...

Extractor for AR aging report ?

Can anybody tell me if there is a standard extractor for this query ?
I would also appreciate if you can tell me what we can get out of this report.
Thanks,
Rishi.

Hi Rishi
Use following for AR aging report (All business content objects)
Data source: 0FI_AR_4
Info cube: 0FIAR_C03
Query :0FIAR_C03_Q0005
Hope this helps
Regards
Pradip

Important, I cant seem to find the hierarchy chart for Sony - For a research paper

Hello,
College student and a PS3 gamer.
I need a hierarchy chart for Sony - For a research paper
Thank.
Solved!
Go to Solution.

Hi J D,
Welcome to Sony Community!
Unfortunately, Information about educational research or reports cannot be provided online. I would recommend the book "MADE IN JAPAN," written by Akio Morita (our founder) as an excellent resource for both the history of Sony and our products. You may also want to visit the following website for a detailed presentation of the company history:
http://www.sony.net/SonyInfo/CorporateInfo/History/SonyHistory/
You may also wish to review our Annual Financial Report at:
http://www.sony.net/SonyInfo/IR/financial/ar/index.html
If my post answers your question, please mark it as "Accepted Solution".
Thank you for your post.

Role with SPRO for FICO

Hello SAP EXperts,
Can anyone tell me how to create a role with SPRO authorization for FICO transactions and roles only. I need to assign a role with which a FICO consultant can do all the customizing related tasks in the development server. Please give some solution.
I invite your valuable inputs
Thanks & Regards
Vanitha
Edited by: Vanitha badampudi on Oct 21, 2008 1:33 PM
Edited by: Vanitha badampudi on Oct 21, 2008 1:36 PM

Hi there,
The easiest way to get all of the t-codes, is for a customising project to be created in the IMG with all of the relevant IMG activities assigned to it. (Your FI CO consultant can assist here.)
Once that has been done, you can go and create a role in PFCG. Select the menu tab, then select Utilities - Customizing Auth. and it will then ask you to select a customising project.
Once you've done that, all IMG activities and transactions for that customising project will automatically be entered into the menu.
You then need to go and maintain and generate the authorisations.
That's my suggestion.
Hope you can use it.
Regards
Lucille

Scenarios for FICO report

Hi gurus
     anybody please say a scenario for
1)Exception
2)Condition,
3)Variables,
4)RRI
for FICO based reports... its urgent ..please help me out...
   i will assign points
Thanks in advance
pradeep

See below scenarios on which you can implement Exceptions, conditions,........etc on keyfigs.
1. Balance Sheet and P&L: Actual/Actual Comparison
Technical name: 0FIGL_VC1_Q0001
Based on: Virtual InfoCube 0FIGL_VC1
Use
This query is used to display the balance sheet and P&L in two different report periods. The report periods are broken down in the columns, the balance sheet structure/P&L is displayed hierarchically in the report rows.
The balance sheet/P&L is created for exactly one company code. This must be entered using a variable.
Filters
InfoObject     Description of the InfoObject (and restriction or calculation formula)
0COMP_CODE     Company code, variable 0P_COCD (individual value, required entry)
0VERSION     Version, constant value 1
0CURTYPE     Currency type, constant value 10 (company code currency)
0VTYPE     Version, constant value 10 (actual)
0FISCVARNT     Fiscal year variant, variable 0P_FVAEX (SAP exit variable)
User-Defined Characteristics
InfoObject     Description
0BUS_AREA     Business area
0GL_ACCOUNT     General ledger account
Rows
InfoObject     Description of the InfoObject (and restriction or calculation formula)
0GLACCEXT     Balance sheet/P&L item
Columns
InfoObject     Description of the InfoObject (and restriction or calculation formula)
Structure     Key figures
0FIGL_VC1_CK001     1.              Balance value, calculated key figure for the 0FIGL_VC1:
0FIGL_VC1_CK001 = 0VAL_STOCK + 0VAL_FLOW
Structure     Periods:
Report period     1.              Selection for characteristic 0FISCPER, variable 0I_FPER
Comparison period     2.              Selection for characteristic 0FISCPER, varianble 0FI_FPER2 (= copy of variable 0I_FPER)
Absolute variance     3.              Formula:
Report period comparison period
Variance (%)     4.              Formula:
Report period % comparison period
2. Bal. Sheet and P&L (Cost-of-Sales Acc.): Actl/Actl Comparison
Technical name: 0FIGL_VC2_Q0001
Based on: virtual InfoCube 0FIGL_VC2
Use
This query is used to display the balance sheet and P&L according to the cost-of-sales accounting method in two different reporting periods. The reporting periods are expanded in the columns, the balance sheet/P&L item (hierarchically) in the reporting rows.
The balance sheet/P&L is created for a single company code that must be entered using a variable.
Filters
InfoObject     Description of the InfoObject (and restriction or calculation formula)
0COMP_CODE     Company code, variable 0P_COCD (individual value, required entry)
0VERSION     Version, constant value 1
OCURTYPE     Currency type, constant value 10 (company code currency)
0TYPE     Value type, constant value 10 (actual)
0FISCVARNT     Fiscal year variant, variable 0P_FVAEX (SAP exit variable)
User-Defined Characteristics
InfoObject     Description
0BUS_AREA     Business area
0FUNC_AREA     Functional area
0GL_ACCOUNT     G/L account
Rows
InfoObject     Description of the InfoObject (and restriction or calculation formula)
0GLACCEXT     Balance sheet/P&L item
Columns
InfoObject     Description of the InfoObject (and restriction or calculation formula)
Structure     Key figures
     Balance sheet value, calculated key figure for InfoCube 0FIGL_VC2:
0FIGL_VC2_CK001 = 0VAL_STOCK + 0VAL_FLOW
Structure     Time periods
Report time period     Selection for characteristic 0FISCPER, variable 0I_FPER
Comparison period     Selection for characteristic 0FISCPER, variable 0I_FPER2 (= copy of variable 0I_FPER)
Variance (absolute)     Formula: Report period - Comparison period
Variance (%)     Formula: Report period % Comparison period

Extractor for payroll reads data from cluster PCL2?

Hello all,
This is the line from help.sap in payroll extractor.
"The extractor for payroll results reads data from payroll cluster PCL2, not from standard tables."
Can someone explain to me what do we have to understand from that, and where in R/3 do we have to go and check for data.
Thanks in advance.

Anytime some of last information does not upload in delta to BW from payroll because payroll has a process to close it had to be executed (or something like that (sorry, i haven't enough funcional HR knoledge), it happened to me anytime).
But, surely the user that you are using for extraction has no enought rights or authorizations.
Look at these notes
397208 **** very important!!!
672514
964569
329961
585682

Hierarchy extractor for FICO

Similar Messages

Maybe you are looking for