Hierarchy problem when Reporting on Infoset

Hi,
I am reporting on Infoset which is made up of 2 ODS and Customer Master.
ODS 1: General ledger: Line items 1
ODS 2: General ledger Line items- additional fields.
ODS 1 consists of G/L Account.
I have put G/L Account in the filters and i have restricted it by means of the Hierarchy Node Variable.But when am executing the report its giving the error as Variable is Invalid.
By restricting in this similar way i have created quite number of reports in Infocube that contains G/L Account.Moreover in those reports also G/L Account has been restricted by the same Hierarchy Node Variable as in the report on Infoset.
I would like to know whether any constraints when reporting on Infosets?
Thanks,
Rajesh janardanan

Takeaways ..
<b>Design Recommendations</b>
To avoid problems caused by duplicated key figure values (see SAP Note 592785), we recommend that you only stage the key figures of one DataStore object or InfoCube of the InfoSet for the query (indicator in the first column in InfoSet maintenance).
SAP recommend that you only use one InfoSet object (DataStore object, InfoCube, or master data table) with ambiguous characteristic values. This means that when you join a DataStore object with an InfoCube, as long as the InfoCube contains the visible key figures, all the key characteristics of the DataStore object are used in the join condition for the InfoCube. Equally, when joining a master data table with compounding to an InfoCube, all of the key characteristics of the master data table are joined with the characteristics of the InfoCube.
http://help.sap.com/saphelp_nw2004s/helpdata/en/05/7ce2416149c717e10000000a155106/content.htm
Hope it Helps
Chetan
@CP..

Similar Messages

Problem when report is exported to excel

HI gurus,
I have one formula in report which gives one number as output.But in report it displays some hardcoded text which has been populated through WAD with the help of classes and interfaces.
So now the report displays the text on web.But when exported to ms excel the actual output(number) of formula is downloaded.
I want that text to be downloaded in excel.Please let me know if it is possible.Plz reply if problem is not clear.
Regards,
Prasanna.

Hi,
i wil mail you a javascript. give me your id, i can paste it here. But this will only load data for the current page. This is somewhat a work around. BUt this is just for the current page.
If you need entire stuff, raising an OSS message can help, but i believe SAP is already aware of the same.
Just check whether an OSS note already exist.
Regds,
Shashank

Hierarchy problem when creating IDoc with multiple headers

Hi,
In general, When you create an inbound IDoc for the IDoc Type FIDCCP02, you have all the data records arranged in hierarchical order (while viewing it in the we02 transaction).
Our requirement is to have m number of headers(E1FIKPF) and in turn it has n number of items(E1FISEG) inside a same IDoc. We have a problem in viewing the hierarchy of them in the data records tab. It comes down in a flat order without hierarchical division.
If we have only one header, we get the hierarchy sorted by default. If we have multiple headers we see the same problem again.
We guess some make-ups in the EDIDD structure which contains segnum, hlevel etc needs to be done.
Let us know the correct method to get this fixed.
Points will be rewarded.Thanks in advance.
Regards,
Reni

Every Idoc segment has a place to put in the parent segment for that Idoc. When you "fill" the Idoc , this tsep might not be executing for some reason.
Is this some customer development?
in EDID4 ,see these fields
PSGNUM-Number of the hierarchically higher SAP segment
HLEVEL Hierarchy level.
Regards

Authorization problem when displaying icons in BW Report

Hi All
I have the following problem when display BW Report as iView: The report data itself is displayed perfectly but to display the icons (like DrillDown arrows, Hierarhy level open arrows) the Windows login message "Connect to <my BW server.com>:8000" appears and I have to enter BW user name and password explicitly. The system for BW is defined, the user is mapped, UIDPW method is used. Again, the report data itself is displayed, the problem is only with icons. I can see that the path to icons is like:
http://<my BW server>.com:8000/sap/bw/Mime/BEx/Icons/s_b_up.gif
How could I rid of this authorization request?

Thanks! I already did this and it helped for most of icons. But for five remaining icons i still get authorization request althoug these icons are in the same path. The icons are:
http://<server>.com/sap/bw/Mime/BEx/Icons/cascading.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/checked.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/separator.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/marked_right_35.gif
http://<server>.com/sap/bw/Mime/BEx/Icons/loading.gif

Problem when editting a row in report

Hello,
I have a problem when I want to edit a row in a report.
I have created a form with report, and now whe I click on the edit icon on the report page, it navigates me to the form page but wothout the row data, so it let me create a new row..
What should I do??

Hi,
After editing the row go to session vales in the form page and see if the hidden primary key column has a value set ?
Did you do any changes to the form or report after creating "From on a table with report" ?
If you can recreate the issue in http://apex.oracle.com i can look into it.
Edited by: Apex-Ape on Jun 17, 2012 7:10 AM

Problem when trying to print standart invoice crystal report for SAP

Hi All, I have the following problem when trying to print a system invoice report in crystal reports for SAP
I pass params and load the report using this code
Private Sub DisplayThreadReportSeq()
Dim oView As New frmViewReport
Dim strReportPath As String = ""
Dim strParamName As String = ""
Try
Dim CR As New ReportDocument
CR.Load(oReport.CrstPath)
' Declare the parameter related objects.
SetReportValues(CR)
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
' Get the report's parameters collection.
For Each oPar As cslParam In oReport.Params
crParameterFieldDefinitions = CR.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item(oPar.ParName)
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = oPar.Value
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
Next
If pPrint Then
If oReport.Printer "" Then
CR.PrintOptions.PrinterName = oReport.Printer
End If
CR.PrintToPrinter(IIf(oReport.Copies = "", 1, oReport.Copies), False, 0, 0)
SBO_Application.StatusBar.SetText("Printed Document Successfully", SAPbouiCOM.BoMessageTime.bmt_Medium, SAPbouiCOM.BoStatusBarMessageType.smt_Success)
Else
oView.Text = pReport
oView.TopMost = True
oView.Viewer.ReportSource = CR
oView.Hide()
oView.ShowDialog()
End If
Catch ex As Exception
Util_GenErrorLog("DisplayReport", ex)
End Try
End Sub
This code works fine when the report invoke to print is developed in crystal reports version for .net 2008 or .net 2005
when trying to print a report standart getting from SAP BO 8.8.1 using this code I getting the following error:
Error in File C:UsersecombaAppDataLocalTemp5ARInvoiceStandartSap {300B9A68-DF05-4D7B-8F3B-1670A4493BEE}.rpt:
Error in formula .
'Shared numberVar SectionTotalMaxHeght;
A number, currency amount, boolean, date, time, date-time, or string is expected here.
This report is the standart report that SAP 8.8.1 includes and works fine on SAP.
I referenced this dlls CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.CrystalReports.Shared, version 10.2.3600
How I can get these dll´s version for Crystal Report 2008 for SAP Business one or How I can solve this problem
thanks in advance,
Ezequiel.

Hi Ezequiel,
You can try to search in SAP Business One Reporting & Printing forum section or post there.
nd.Q

Display problem when reading Traditional Chinese in Crystal Report 2008

Hi All,
I have tried to connect MS SQL 6.5 to build up a report. However, I encounter a problem when read Traditional Chinese. all chinese characters turn into adnormal characters. I wonder it is problem of SQL Server or some setting that I may not know. In addition, I can able to read chinese in the application program , ISQL / Query Analyzer. Please help to give idea and suggestion to fix this. Thanks
SQL Server: MS SQL Server 6.5
Client OS: Window XP ( Traditional Chinese Version)
Server OS: Window NT and Window Server 2000
Stsyou

Hi
If you are using a Chinese language build database, Crystal Reports English build might not display the characters properly as non english databases include one byte characters as ASCII code character and double-byte characters as their own language code character.
Traditional Chinese, Simplified Chinese, Japanese (Kanji, Hiranga, and Katakana), Korean and Vietnamese use double-byte characters.
However, a possible workaround to this issue is to verify that the encoding on the database client is configured according to the examples below. Also, you will need to install the language pack in the English environment.
CONFIGURATION EXAMPLES:
Shift-JIS for a Japanese database
Big5 for a Traditional Chinese database
GB2312 for a Simplified Chinese database
iso-2022-kr for a Korean database
Windows 1258 for a Vietnamese database
EXAMPLE SCENARIO:
An Oracle database saves non-English language data such as Japanese.
The Windows operating system is English.
STEP TO CONFIGURE THE CHARACTER CODE IN THE ENVIRONMENT SETTING
(This step is based on the details of the EXAMPLE SCENARIO.)
1. Configure the system environment on the database client side to 'Shift-JIS' as the character code set in the Environment Setting.
This results in the NLS_LANG variable set to Japanese_Japan.JA16SJIS under the registry HKEY_Local_Machine\Software\Oracle\Homeo.
STEPS TO INSTALL LANGUAGE PACK IN AN ENGLISH ENVIRONMENT
(These steps are based on the details of the EXAMPLE SCENARIO.)
1. Add languages to the computer system by clicking:
Control Panel > Regional Options > General
2. Select the check box for 'Traditional Chinese', 'Simplified Chinese', 'Japanese', 'Korean' or 'Vietnamese'.
3. Click 'Apply'.
4. When you are prompted, insert the Windows CD-ROM to install the language pack.
5. Restart the computer.
Upon completing these steps, you are able to display the languages characters in the Crystal Reports Designer in a Windows English environment.
==========
NOTE:
If the database table and field names use non-English language characters, Data Explorer in CR will not correctly display these names. However, when you preview the report, the non-English data displays correctly.
==========
Configuring the database client according to the examples and installing the language pack will display the characters successfully. However, there are cases when this workaround does not resolve the issue.
For further information about CR and double-byte languages, refer to knowledge base articles, c2008083 and c2008349.
Hope this helps!!!
Regards
Sourashree

Problem when querying OLAP for Value based hierarchy

Hi I have problem when querying OLAP for value based hierarchy , for level based dimension it work fine
the strange part is if I only put one value, it will work perfectly
for example if I put only 1 value for that value base hierarchy like CF_HIER::426362, then it will get the correct value for that id 426362
but if I put multiple value to the list
CF_HIER::426362
CF_HIER::424470
CF_HIER::429073
CF_HIER::424230
then only some value will come out correctly, some of them will be 0, I wonder why because if I query using each value, then it show correct value
for multiple value usually only the top in hirarchy give correct value, but the leaf will give 0, but if I query only the leaf, the leaf will give correct value
this problem only happen for my value based hierarchy, for the level based hierarchy it work fine both for each value or multiple value in the list
this is the code how I guery
////the "elementIdList" is where the value is (CF_HIER::426362,CF_HIER::424470,CF_HIER::429073,CF_HIER::424230), if I only put single value in this list the query work fine, but if I put multiple value then some value give correct result, some will give 0
String[] elementIdArr = new String[elementIdList.size()];
          int i = 0;
          for (Long elementId: elementIdList) {
               String elementIdStr ="";
               if (hierarchy instanceof MdmLevelHierarchy)
                    elementIdStr = hierarchy.getName()+dimension.getValueSeparationString()+
                                        level.getName()+dimension.getValueSeparationString()+
                                        level.getName()+"_"+elementId;
               else
                    elementIdStr = hierarchy.getName()+dimension.getValueSeparationString()+
                                        elementId;
               elementIdArr[i++] = elementIdStr;
          Source myList = dp.createListSource(elementIdArr);
          result = hierarchy.getSource().selectValues(myList);
     Source joinedSource = measure.getSource();
          joinedSource = joinedSource.join(result );
is there any suggestion where I'm doing wrong?or is it different between querying value based hier with level based hier?
thanks

Hi I have problem when querying OLAP for value based hierarchy , for level based dimension it work fine
the strange part is if I only put one value, it will work perfectly
for example if I put only 1 value for that value base hierarchy like CF_HIER::426362, then it will get the correct value for that id 426362
but if I put multiple value to the list
CF_HIER::426362
CF_HIER::424470
CF_HIER::429073
CF_HIER::424230
then only some value will come out correctly, some of them will be 0, I wonder why because if I query using each value, then it show correct value
for multiple value usually only the top in hirarchy give correct value, but the leaf will give 0, but if I query only the leaf, the leaf will give correct value
this problem only happen for my value based hierarchy, for the level based hierarchy it work fine both for each value or multiple value in the list
this is the code how I guery
////the "elementIdList" is where the value is (CF_HIER::426362,CF_HIER::424470,CF_HIER::429073,CF_HIER::424230), if I only put single value in this list the query work fine, but if I put multiple value then some value give correct result, some will give 0
String[] elementIdArr = new String[elementIdList.size()];
          int i = 0;
          for (Long elementId: elementIdList) {
               String elementIdStr ="";
               if (hierarchy instanceof MdmLevelHierarchy)
                    elementIdStr = hierarchy.getName()+dimension.getValueSeparationString()+
                                        level.getName()+dimension.getValueSeparationString()+
                                        level.getName()+"_"+elementId;
               else
                    elementIdStr = hierarchy.getName()+dimension.getValueSeparationString()+
                                        elementId;
               elementIdArr[i++] = elementIdStr;
          Source myList = dp.createListSource(elementIdArr);
          result = hierarchy.getSource().selectValues(myList);
     Source joinedSource = measure.getSource();
          joinedSource = joinedSource.join(result );
is there any suggestion where I'm doing wrong?or is it different between querying value based hier with level based hier?
thanks

Reports layout/format problem when called from forms

hi,
using forms and reports builder 10g OS winxp
i have created web and paper layout report with pre-defined template gray (rdf). when i run the web layout there is no problem.
when i call this report from form using
web.show_document('http://machine:8889/reports/rwservlet?report=mail_report.rdf&destype=cache&desformat=HTML&userid=abc/xyz@dbname&para1='||:parameter1, '_blank');
the layout (cell bgcolors of the table) does not appear.
pl guide what am i missing out.
thanks

Hi,
that has nothing to do with forms. Your call inside web.show_document is a servlet-call. With this you get the paper layout of a report. If you want to get the web-layout, you have to call the report with a jsp-call. In your case that might look like http://machine:8889/reports/mail_report.jsp?userid=.....
If you store your report as jsp-file, you can use it for paper & web-layout, as rdf only paper-layout is possible.
http://download.oracle.com/docs/cd/B25016_08//doc/dl/bi/B14048_02/pbr_arch.htm#i1005927
http://download.oracle.com/docs/cd/B25016_08//doc/dl/bi/B14048_02/pbr_run.htm#g1022421
Regards
Rainer

FBL3N : i have a problem when i print a report

Hi Gurus,
I have a problem when i print a report from Tcode : FBL3N
- i didn't have the last line of the report
- i have two pages : i want just one because it is a small report
I choosed this Format : X_65_200
Please help me to solve these issues.
Thanks.

Try to choose a layout that has 65 lines.
If the report is too wide you might change the line layout (take out columns you do not need) until it is ok to print on 1 page.
Regards
Hein
P.S. assign points if useful

Menu bar problem when executing reports

We have a problem when executing the reports either from se38 or through transaction.
The standard menu bar is not appearing and in its place we are getting ????????????? ?????????????????
also the icons that are appearing in app tool bar are not showing anything.
Whats the reason for this?

hi,
It is not for one single report iam talking about,any report that is executed from se38 or transaction .
In selection screen of report we are getting ???????????????
?????????????? in menu bar instead of normal options like program edit goto utilities.................
does any one know the reason for this?
This issue we are facing today only.
Edited by: Gautham chakraverthi on Oct 31, 2008 3:06 PM

Interactive report using Infoset quiereis with SQ01,SQ02,SQ03.

Hi,
         I have to create a report by using the infoset query with SQ01,SQ02 and SQ03 Tcodes. But problem my requerment is that I have to create one interactive report with these quereis.
Can any body tell me how to create this interactive report using infoset quereis OR are there any standard quereis which are having interactive nature.
Pleas send me the solution and thanks in advance.
regards,
J.

Yes, but I am not able to figure exactly how to implement it? I mean I can do this same code in SE38 where I know names of the internal tables. But when in SQ02 we can't modify/read system tables (I found name of the system tables using report generated by SQ01). So how you will access them, then how you will reflect our changes in output ALV grid?
Example:
Data:
Rate Cat.      Installation     Date
71     60000984     20/10/2009
71     60000984     20/12/2009
71     60001101     10/09/2009
78     60000310     10/09/2009
78     60000315     10/09/2009
83     60000297     10/09/2009
so in this case I want output:
Rate Cat.      Installation     Date
71     60000984     20/12/2009
71     60001101     10/09/2009
78     60000310     10/09/2009
78     60000315     10/09/2009
83     60000297     10/09/2009
You will see 71     60000984     20/10/2009 is not the latest one, therefore I don't want that row. I can do the ABAP logic for this, but exactly what and how to implement in SQ02?

Strange problem when tried to convert HelloWorld.class..

Hi friends..
i've downloaded the Java Card SDK 2.2.1, and i tried to compile HelloWorld application that shipped with its distribution..
i found strange problem when i tried to convert HelloWorld.class into .CAP, etc.. :(
I use Windows XP, assume that i've set the Environment Variables needed
i've compiled the HelloWorld.java into HelloWorld.class..
the package of of HelloWorld is : com.sun.javacard.samples.HelloWorld;
and i use this config file :
-out EXP JCA CAP
-exportpath .
-applet 0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1:0x1 com.sun.javacard.samples.HelloWorld.HelloWorld
com.sun.javacard.samples.HelloWorld
0xa0:0x0:0x0:0x0:0x62:0x3:0x1:0xc:0x1 1.0and then i tried to run converter script in the Console :
*C:\java_card_kit-2_2_1\samples>converter -config com\sun\javacard\samples\HelloWorld\HelloWorld.opt*
*error: file com\sun\javacard\samples\HelloWorld\HelloWorld.opt could not be found*
Usage: converter <options> package_name package_aid major_version.minor_ve
sion
OR
converter -config <filename>
                    use file for all options and parameters to converter
Where options include:
        -classdir <the root directory of the class hierarchy>
                      set the root directory where the Converter
                      will look for classes
        -i            support the 32-bit integer type
        -exportpath <list of directories>
                      list the root directories where the Converter
                      will look for export files
        -exportmap    use the token mapping from the pre-defined export
                      file of the package being converted. The converter
                      will look for the export file in the exportpath
        -applet <AID class_name>
                      set the applet AID and the class that defines the
                      install method for the applet
        -d <the root directory for output>
        -out [CAP] [EXP] [JCA]
                      tell the Converter to output the CAP file,
                      and/or the JCA file, and/or the export file
        -V, -version print the Converter version string
        -v, -verbose enable verbose output
        -help         print out this message
        -nowarn       instruct the Converter to not report warning messages
        -mask         indicate this package is for mask, so restrictions on
                      native methods are relaxed
        -debug        enable generation of debugging information
        -nobanner     suppress all standard output messages
        -noverify     turn off verification. Verification is defaultPlease help me regarding this, because i'm new in this field..
Thanks in advance..

Thanks safarmer for your reply..
i tried this :
C:\java_card_kit-2_2_1\samples>javac -target 1.3 -source 1.1 -g -classpath .\cla
sses;..\lib\api.jar;..\lib\installer.jar src\com\sun\javacard\samples\HelloWorld
\*.java
javac: invalid source release: 1.1
Usage: javac <options> <source files>
use -help for a list of possible options
C:\java_card_kit-2_2_1\samples>javac -target 1.3 -source 1.2 -g -classpath .\cla
sses;..\lib\api.jar;..\lib\installer.jar src\com\sun\javacard\samples\HelloWorld
\*.java
it seems that i can't specify the -source to 1.1, so i tried to use -source 1.2..
after that, i tried to convert again, and i got this error :
C:\java_card_kit-2_2_1\samples\src>converter -config com\sun\javacard\samples\He
lloWorld\HelloWorld.opt
Java Card 2.2.1 Class File Converter, Version 1.3
Copyright 2003 Sun Microsystems, Inc. All rights reserved. Use is subject to lic
ense terms.
error: com.sun.javacard.samples.HelloWorld.HelloWorld: unsupported class file fo
rmat of version 47.0.
conversion completed with 1 errors and 0 warnings.Please help me regarding this..
Thanks in advance..

WAD Hierarchy problem

Hello,
Sometimes when I open a hierarchy in WAD report, it opens a new session of IE instead of opening the hierarchy.
I don't have a clue how to fix it.....
Please Advise!
David

The problem happened only in MAXTHON browser... I installed it again and the problem disappeared.

Export to Text failing when Report height is more than 23 inches

I have a problem while exporting to Text, when report height is more than 23 inches. It's failing with "an unhandled exception occurred in crw32.exe [3856]"
Both Crystal Reports 2008 and Crystal Reports XI Release 2 are failing. Export to PDF is working fine.
I am trying to design a lengthy report and export to text.
I searched in forum with out any results.
It would be great, if some body can point me in right direction. Thank you.
Regards,
Raveendra

Hi Raveendra
To work around this error message, disable DEP by performing the following steps:
1. Click Start > Settings > Control Panel.
2. Double-click 'System'. The "System Properties" dialog box appears.
3. Click the 'Advanced' tab.
4. Click 'settings' under 'performance'.
5. Click the 'Data Execution Prevention' tab
6. Select 'Turn on DEP for all programs and services except those I select:'.
7. Click 'Add'.
8. Browse for the application CRW32.exe. This file is located in:
C:\Program Files\Business Objects\Crystal Reports 12\
9. Select CRW32.exe and click 'Apply'.
10. Click 'OK' to close the 'System Properties' dialog box.
11. Log on as an Administrator and start Crystal Reports.
Now try to export report to the text format and observe the behavior.
Regards
Girish Bhosale

Hierarchy problem when Reporting on Infoset

Similar Messages

Maybe you are looking for