Hierarchy roll up and sign reversal

Hi SDN,
I used the formula variable and the replacement path method to correctly display the sign of the key figure.
But as I see also in the SAP BW help notes, the values only display with reversal based upon hierarchy attribute of sign reversal, they do not roll up correctly.
Any suggestion how to overcome this problem? This is a major production issue on my project and urgent. Please help. Has anyone use a user exit to fix it? If so can you give source, etc.?
Points surely be awarded.
Thanks.
Saf

Did you get to make the sign reversal roll up correctly. Currently its not working for me. I have same account in two different nodes, and doing a sign reversal on one of them to nullify the amount. The node with sign reversal works but the roll up to the root node doesnt work.
Root - 100
parent1 - (-100) - sign reversed
parent2- 100
Any pointers.

Similar Messages

  • I had to change my email acct and do not have access to the original one my icloud, iTunes,etc have. I changed it and signed out and was able to successfully change to the new email on iTunes and Apple ID. However, I can not get icloud to change over and.

    I can not get icloud to let me change the email to my new acct???

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, and if your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • 'Hierarchy Based Login' and 'Direct Reports' field in Dim - Position table

    Hello -
    I am trying to build a "My Team's" report, which basically shows the logged in Managers ( and his subordinates) revenues rolled up by default. Then the manager needs to drilldown on his name and see revenues grouped by his direct reports. I am using OBIEE 10G. In the out of the box RPD, there are two fields in the BMM layer called 'Hierarchy Based Login' and 'Direct Reports'.
    1. The 'Hierarchy based Login' field uses the INDEXCOL method to get relevant column from the W_POSITION_DH table based on the the Logged in users hierarchy level (the hierarchy level is stored in a session variable (HIER_LEVEL). This session variable works fine and i have tested the SQL)
    2. The 'Direct Reports' is using the same INDEXCOL method, just that it uses the formula HIER_LEVEL - 1. This works fine as well.
    The issue i am facing is neither of these out-of-the-box fields are assigned to the Position dimension (the position dimension also exists OOTB).
    So basically, i am able to create a manager and his direct subordinate report, but without any drill functionality.
    I am trying to get the report to drill all the way down to the bottom most level of the heirarchy.
    Any help to get this working is much appreciated

    What i meant was neither of these out-of-the box fields are assigned to a Dimension Hierarchy ( there is a hierarchy called 'Position' that already exists out-of-the box). Other fields in the 'Dim-Position' table are assigned to a level in this position hierarchy, except these two. I guess what i am trying to achieve is to dynamically assign the hierarchy level based on the users Hierachy level in W_POSITION_DH table.
    Thanks for spending time to look into my issue

  • My computer has rolled back and I have lost my licence code how do I find it? I am running windows xp and Photpshope Elements 12

    Hoping that someone can help my computer has rolled back and I have lost my licence code I am running windows XP and Photoshop Elements 12

    If you registered it with Adobe, you can sign in to your account and find it:
    Find your serial number quickly

  • Decimals and sign display

    Hi BI Experts,
    We have a query that displays a restricted key figure with sign and decimal. We want to display this with negative sign in the front and with no decimal places. The data in the MultiProvider looks good with negative sign at the end and with 2 decimal places.
    But in the query we are getting like
    2,978,131
    69,418
    1282.000000000-
    358820.000000000-
    544.000000000-
    3488.000000000-
    165018.000000000-
    We tried to format in query properties with sign reverse and decimal places.
    The negative values are not formatted even with thousand separator and there are 9 zeros after decimal places. Positive figures are OK.
    How to display in our desired format. We want to display like -3,488 and not 3488.000000000-
    We are using BI 7.0 SP10
    Thanks.
    Sheo

    Hi Chritian,
    I don't understand, why you wrote "It´s a pitty, that you are not able to give 10 Points to yourself ". I didn't reply to your mail to get points. I got your quesion in my mail and I shared my experience what we did in our system to solve this issue. For a work around you can do the following also. Select the column->in BEX report->click data in excel menu bar -> click Text and Columns -> select delimited radio button and click next-> check box Tab and click next - > select radio button General and click finish.
    You should be able to see your data in number format. You can write a macro also and  put in the Function SAPBEXonRefresh.
    Thanks.
    Sheo

  • Sign reversal not working in Web Template

    Hello,
    I have created a web template with the web application designer containing an "Analysis" web item. The query that I use as the dataprovider has toggled the property "Reverse sign" for all key figures.
    When I execute the query in the BEx all minus signs disappear and the figures are shown correctly with sign reversal.
    When I execute the web template though the minus signs stay in front of the figures; sign reversal does not happen?
    There is no property for the "Analysis" web item that allows me to control the sign reversal, so I assume that the web item fetches this setting from the dataprovider/query.
    Any idea what is going wrong there?
    Thanks to any answers in advance.
    Regards,
    Philipp

    Hi Heike,
    thanks. That note made things clear
    I think we then should update to SPS 09...
    Regards,
    Philipp

  • Issue with Sign reversal in Voyager while coneecting to BW Query

    I am using Voyager (XI 3.0) to connect to SAP BW query. Query consists of characteristic structure, where some of the rows of structure are reversed using option "Sign reversal". Usually in SAP BW all the Revenues are in negative sign and in the report we should convert it into positive sign.
    In Bex Web report i am able to see the data which is reversed as defined in query. But if I create a report in voyager, it still gives the data in negative sign.
    Is this a problem in XI 3.0?
    Thanks
    Raghu

    Hello Raghu
    Voyager just displays the information contained in the BW OLAP server. Most artifacts of the query are ignored by Voyager... which is designed for data exploration and analysis. Hence why numbers are displayed with the negative sign.
    There are two options:
    1) Open the Voyager Measures formatting option and for each measure (key figure) you can specify how the negative number is represented, e.g. in red or within parenthesis.
    2) If all the numbers in a row/column are negative and if there are only a handful of rows/columns... a possible workaround is to create calculations which take the original measure and multiply by -1. You can then hide the original measures leaving only the calculated measures.
    Regards

  • TS3988 I want to delete my current I.cloud account and sign up with a new one

    I want to delete my current icloud account and sign up with a new one

    Go to Settings>iCloud, tap Delete Account and provide the password when prompted (if running iOS 7).  Then sign back in with a different ID to create your new account.  Be sure to save any photo stream photos you wish to keep to your camera roll before deleting the account by opening your my photo stream album, tapping Select, tapping the photos, tap the share icon (box with upward facing arrow, then tapping Save to Camera Roll.
    If you want to migrate your data to the new account, you'll need to open each of your notes and email them to yourself so you can later copy and paste the text into new notes created in your new account.  Then go to Settings>iCloud, tap Delete Account, choose Keep on My iPad and provide the password when prompted.  Then sign back in with a different Apple ID to create your new account and choose Merge to upload your data.

  • HT204053 Wrong "update" to my phone and cannot reverse

    I made a huge mistake.  Tried to update from summary to restore the backup to my iphone 4S and accidently completed a backup of my daughters information to my phone.  The update is not entirely complete to the phone because I haven't placed my daughter's password to her account.  How can I reverse and update my information?

    Howdy Malcolm,
    It sounds as if you need to sign out with the incorrect Apple ID and sign back in with the correct one. You can do that by following the steps in this article -
    Sign in with a different Apple ID on your iPhone, iPad, or iPod touch - Apple Support
    Go to the section titled iCloud.
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

    I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

    What file format did you export it to?

  • A few questions before I buy a new iMac/Mac mini and sign up for Creative Cloud.

    Hello Everyone,
    I am looking to purchase a new Apple computer and sign up for Creative Cloud within the next week and I have a few questions that should be answered before I proceed.
    My wife and I own a business and we will be using the CS6 apps to create brochures, Constant Contact mailings, product package inserts, edit product photography for print and web use, and short HD how-to videos. We are not graphics professionals or power users and wont be doing anything too complicated.
    Any help and answers will be greatly appreciated.
    I will start with the hardware questions first:
    I am trying to decide between the iMac and the Mac mini.
    The iMac is a 2.7Ghz Quad-core Intel core i5 and comes with 4GB of memory that is expandable to 16GB, which I will do for sure. It comes with a Radeon HD 6770M graphics card with 512MB of GDDR5 memory(not upgradable), and a 1TB HDD that runs at 7200RPM. This unit meets the specs required.
    The 2.5Ghz Mac Mini comes with 4GB of memory that is expandable to 8GB, I will also do this. It has a Radeon HD 6630M graphics card with 256MB of GDDR5 memory(not upgradable), and a 500GB HDD that runs at 5400RPM. This unit meets all the spec(I think) except for the speed of the HDD.
    Question: Will the mini run the software without too much of an issue considering the speed of the HDD?
    Question: Will the iMac run the software significantly better to justify the price difference?
    I already have 1 mini(purchased 4 months ago, with the same specs listed above) and will be purchasing a second computer for my wifes desk. If the mini will run CS6 fine, that is great and we can save a few bucks. If my mini will not run CS6 well, I will get the iMac for her desk as she will be doing the bulk of the work in that regard anyway.
    Now a couple of software questions.
    After reading hundreds of reviews and forum posts over the last few days I have seen many people having this or that issue. It seems to me that most of the issues are because of upgrades from Lion to Mountian Lion after installing CS6 first or trying to open CS3,4,5 files in CS6.
    If you want to know what issues have me concerned take a look at just this one forum:
    http://blogs.adobe.com/jnack/2012/07/adobe-cs-apps-mountain-lion-no-known-issues.html
    Similar issues are discussed in the Apple forums as well as many other places around the web.
    I am not a computer professional but I know enough to maintain my systems and keep them running smoothly.
    We do not have any Adobe software installed on my mini and will not be opening any files from previous versions of Adobe product in the new CS6 software. These will be a clean installs on pristine systems running fully updated Mountian Lion OS's on both machines and creating new files from scratch.
    Question: Should I be expecting any issues like the ones I have read in the forums and blogs or are these just the normal things that happen when upgrading to new software with multiple hardware configurations?
    My feeling is that we will not be having too much of a problem due to the clean installs and no files from previous versions.
    Next up, the Creative Cloud(CC) FAQ states that you can install on 2 machines but can't open stuff at the same time.
    Question: Does this mean we can't be using any CS6 apps at the same time or just not using the same app at the same time?
    Example: PS and PS on both machines at same time = No, PS on one and Dreamweaver on the other at the same time=Yes?
    The CC FAQ page says Adobe will add Lightroom 4 later in 2012 while the main CC page lists it as available now.
    Question: Which is true?
    My mini is registered to me, with my name, iTunes account, Apple ID etc.
    Question: Do I need to do the initial set-up of the new machine with all my information to ensure the CS6 suite works on both machines? Do the computers need to be registered(as far as Apple configuration is concerned) to same person for them to work on one CC account or can I install CS6 on any 2 machines regardless of how they were initially set-up?
    This may seem like a silly question but I want to avoid any problems before they happen.
    Well, those are all of my questions at the moment. To anyone who made it this far in my looooong post, Thank You so much for your time. I appreciate your expertise and knowledge and hope that you can help me make this decision.
    Cheers,
    Alex Bogdan

    Alex,
    I'll try and answer your questions as best I can.
    Qn 1 Which Mac.
    Ans:- As I understand it both units will run Adobe CS6.
              Which one really depends on what you wand from CS6. If you are looking for high end demand and performance, then I would go for the IMac
              Your Specs for the Imac are right. However if you buy your IMac straight from Apple there are even higher specs.
              You can get:-
                                  3.4 GHz i7 processor rather than the i5
                                   2GB video card as opposed to a 1Gb video card.
                                   Of course such a model will cost you more.
              In the end it is needs compared with money to spend. That is only a decision you cam make.
    Q2:- Will the higher cost for the Imac justify copst.
    Ans:- Again it depends on what demands you intend to make on the hardware and software.
              But I note you have a business and if that businees expects to high demand and high speedy performance then I suspect the Imac would be more able to provide your needs.
              Again only you will know the answer to that.
    Q3:- Questions about CS6 reliability
    Ans:- I have been with Adobe for way over 10 years.
             Speaking, only for myself, it is the most reliable software on the market.
              It is true that if you look down this form, like any other and I am thinking about the Apple discussions forum, you will find numerous instances of problems.
              Again this is only my opinion, but although all these problems are real for the individuals:-
              First it is not clear why they have the problem e.g. what have they done or not done.
              Second, they are in the minority of the total users using the hardware / software.
              The only problem I am aware of with CS6 is Acrobat X. I understand it has been sorted Adobe, however it cost me so much work I have removed it from my system and reverted to Acrobat 9
              So what I am saying is that there are only two comapnies I rely 100% on: They are Adobe and Apple.
             So if you are happy with my opinion I would not worry about Adobe CS6
    Qn 4:- CS6 0n 2 machines.
    Ans:- Yes you will not be able to run the same program similtaneosly.
               I believe, if it is important that you do run the same program together, that you can acquire a further licience from Adobe to do that.
               You would need to contact Adobe about that.
    Qn 5:- Lightroom 4
    Ans:- Lightroom is now available as part of Creative Cloud.
    Qn 6:- Set up for individual machines
    Ans:- I do not believe you do. Once you have set up your Creative Cloud account you go to the apps site and download the apps for each machine.
              Each machine downloads the apps and your machine and the apps are registered by Adobe.
             Here is something that you may want to know:-
              Because I was so unhappy loosing all the Acrobat data with Acrobat X I ended up deleting Acrobat X
              However as far as Creative Cloud is concered Acrobat X is still on my machine.
              It is not a problem for me because I am happy with Acrobat 9, it fullfils my needs and has not crashed and lost me all my bookmarks.
              However here is the point:-
              Adobe, when there was a problem with Acrobat X requested that no-one deletes the application.
             Though I do not know for certain I believe registration of the apps you have with Creative Cloud are registered with Creative Cloud in their database. Therefore were you to delete an app, it will still be registered with Creative Cloud and you will not be able to download a further copy even though the app is no longer on your    machine.
              Therefore it maybe not a good idea to delete an app when you no longer have a use for it. If you want it back I suspect you will have to contact Adobe Support
    Personal Comment:-
              It is true many unfortunately have had all sorts of problems, including me with Acrobat X.
              That said, Creative Cloud in my view has been a major advance in how Adobe delivers software. I have no regrets with signing up to Creative Cloud and I expect to remain with it.
    Hope all of that goes some way to answering your questions.

  • I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!

    I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!

    Does your Cloud subscription show on your account page?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    Also,
    This is an open forum, not Adobe support... you need Adobe support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

    Help needed,
    I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still  I cannot login I to my itune account. Same message keeping. Popping up,  this problem started supricly today.

    Take a look at the instructions here.
    http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

  • Can't access photos in camera roll - camera and  photo app crashes

    Have iphone 4 with iOS 5.0. Took pictures but now I can't access any photo in the Camera Roll. When I now try to take a picture, Camera app crashes. If I try to access the Camera Roll via Photo App, it too crashes. Can't see the photos from iTunes either. Shows it as unknown data. Is there anyway to rebuild the photo library or remove a corrupted photo since I think that is the problem. Any help would be appreciated.

    Thanks to Steve Kehlet who posted the solution that helped me and saved my day, https://discussions.apple.com/message/16405821#16405821
    Follow the link:
    http://www.iphoneincanada.ca/how-to/how-to-fix-iphone-camera-roll-crash-and-phot os-turned-to-other-in-itunes/
    You will need to download PhoneView, but the free 7 day demo does the job - and my camera and photo app are up and running again!

  • How do I get more than one signature option in Fill and sign?

    How do I get more than one signature option in Fill and sign?

    Hi,
    Are you trying to place more than one signature on a PDF document?
    Please explain the workflow.
    Regards,
    Anand

Maybe you are looking for