Decimals and sign display

Hi BI Experts,
We have a query that displays a restricted key figure with sign and decimal. We want to display this with negative sign in the front and with no decimal places. The data in the MultiProvider looks good with negative sign at the end and with 2 decimal places.
But in the query we are getting like
2,978,131
69,418
1282.000000000-
358820.000000000-
544.000000000-
3488.000000000-
165018.000000000-
We tried to format in query properties with sign reverse and decimal places.
The negative values are not formatted even with thousand separator and there are 9 zeros after decimal places. Positive figures are OK.
How to display in our desired format. We want to display like -3,488 and not 3488.000000000-
We are using BI 7.0 SP10
Thanks.
Sheo

Hi Chritian,
I don't understand, why you wrote "It´s a pitty, that you are not able to give 10 Points to yourself ". I didn't reply to your mail to get points. I got your quesion in my mail and I shared my experience what we did in our system to solve this issue. For a work around you can do the following also. Select the column->in BEX report->click data in excel menu bar -> click Text and Columns -> select delimited radio button and click next-> check box Tab and click next - > select radio button General and click finish.
You should be able to see your data in number format. You can write a macro also and put in the Function SAPBEXonRefresh.
Thanks.
Sheo

Similar Messages

$ and % signs in a same column

Hi all,
I have this requirement in which my report is full of facts.
http://i422.photobucket.com/albums/pp302/Seetharam_photos/screen.gif
I'm able to achieve this using Union of three requests.
Now the problem is that, I need to display $ sign for the first two rows and % sign for the third row.
I tried changing the data format under column properties to display the respective signs but it gets applied to one column as a whole, which is not desired in my case.
So i tried changing data format in each n every request and since i'm using union, i'm not able to do tat.
Any workarounds to achieve it..?

Hi Seetharam,
I want to confirm one thing from you... Income, Expenditure . Are these column headings or values?
If headings the...
It seems you should achieve this with Pivot view...
And need to drag Measure Labels into Rows block
And you need to apply data format of that column as $ or % whatever you want..
As you are saying you did union this would be done in Results set of criteria...
May helpful to you...

# sign displayed in report

Hi,
In one of our report, # sign displayed in the plant column(not for all plants) for the selection only for material batch list 714.
I just checked in MB51 to find out the plant, but I can see only the plants which are assigned(around 7 plants). So how can I check the proper plant in R/3 and how to ensure the proper plant is coming through.
Please give me the solution
Regards
dyuthi

Hi,
I checked in the data target with the material and batch and I got the results with all the plants available in R/3 assigned to those materials and batch. And in the data target, I got two records in which no plant is displaying. So thats why in my report # sign is displayed if I am correct.
Why the plant doesnt contain the data. What is the reason behind this and how can I displayed the report correctly with the plant.
Regards
dyuthi

When I sign on to Safari, AOL appears and ADware starts streaming. The same thing happens when i go onto Chrome and sign on to AOL. How can I fix/ Thank you

When I sign on to Safari, Aol appears with streaming adware. The same thing happens when I use Google Chrome and sign on to Aol mail. Is there anyway I can block ads and prevent safari from directing me to AOL without requesting it? I have A MacPro, Yosemite (10.10.2). Thank you

First try
Remove unwanted adware that displays pop-up ads and graphics on your Mac
Next:
Adwaremedic: Removes all known adware from your Mac
If you can't download it since the malware is preventing it then see:
https://discussions.apple.com/docs/DOC-7792

How to add a picture in Background of Sing in and Sign out Screen

Hi MOSC,
How do i add a picture in the background of Sing in and sign out screen in HCM People Soft 9.2 and People Tools 8.53.
Also, how do i get rid of the Language are from the sign on page.
thanks,
Response will be greatly appreciated!
User 501241

Ha, I lost the reply I had typed up and I see Jim replied while I was writing it.
In addition to his comments about changing the file. It's actually signin not signon.html. Jim has the right path though. signon.html is the file that redirects the client to URL=../psp/ps/?cmd=login command which displays signin.html. It's at /home/psadm2/psft/pt/8.53/webserv/peoplesoft/applications/peoplesoft/PORTAL.war/ps/signon.html.
I also gave two blog posts on the topic.
Creating a Custom PeopleSoft Sign On Page - Remote PSAdmin and Hide the ‘Windows 7 is not supported’ message | The PeopleSoft Tipster Blog
The first tells you how to add the background in the comments. The latter discusses customizing the file for other reasons and gives some additional info.
Oh, I also mentioned that the languages are all in a td tag with the class name of pslanguageframe. Which may help you find it, because if I remember the language codes use JSP variables. Just edit the table structure as you like and aligning it to your liking.

Decimals and database

Hola! Quisiera saber si existe alguna posibilidad para que aun visualizando por ejemplo dos decimales para los tipos de datos importe, se almacene internamente en la bd todos los decimales de dicho campo. O que al menos en los pedidos si se muestren todos los decimales y en el resto de documentos y formularios solo dos. Me urge bastante la respuesta. Gracias
Hi! You can view a type of field to two decimal places but are stored internally all decimals? I urge the answer. Thanks

Ok, siento no haber especificado un poco más. El cliente desea poder introducir valores con muchos decimales (5 por ejemplo) y que sea ese el valor que tome sap para todos los cálculos internos, e incluso para impresión de documentos, pero sin embargo desea visualizar en los formularios unicamente los dos primeros decimales.
Una posible opción sería visualizar todos los importes del formulario de pedidos con 5 decimales y los importes del resto de formularios y módulos con dos. ¿esto sería posible?
Gracias por tu rápida respuesta!
Ok, Sorry for not specify more. The customer wants to introduce to many decimal values (5 for example) and that is that sap the courage to take for all internal calculations, and even for printing documents, but nevertheless want to see in the forms only the first two decimal places.
One possible option would be to display all the figures on the form of orders with 5 decimals and figures from other forms and with two modules. Can this be possible?
Thank you for your prompt response!

Nokia 5310: bought it 5 days ago and the display i...

Hello,
I am opening this topic because i feel very frustrated about my nokia recent aquisition. At the 22 of this month (6 days ago) i have bought a nokia 5310 in a People´s Phone store.
The design of the mobile is very attractive and most functions too, that were the main reasons for my aquisition. Now the worst part, as many of you guys the first weeks after i bought a mobile phone are sacred, o treat my mobile as a baby, bought a silicone "wallet", dont know the word in english, dont mix it in the pockets with the keys to avoid scratchs, etc etc etc. However even being so carefull a strange thing happend yestarday, i was driving in my car and suddenly at my mobile and the display was all black. I went to the store wondering what was happening to my mobile and they told me the display was broken however there isnt any exterior sign on bad use or falls of the mobile, as i told you previously i just bought it 5 days ago. I have asked to exchange for another phone as that was very strange the told me they cannot do that because the phone its broken even there isnt a sign of a bad use then cant trade with a new. They also told me that they can send to nokia however they wont do anything because its broken and when its broken the fault seem to be always of the client.
I am really frustrated spend 110€ in a mobile, give it the best treatment and now 5 days after bought its BROKEN!
What you guys think i can, should? What you guys would do?
Thank you
Sorry for bad english!

All you can do is to contact Nokia directly using the "Contact us" tab to the top right of this screen and put forward your case the best you can. You never know what they might do for you. You won't know until you try.

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

A few questions before I buy a new iMac/Mac mini and sign up for Creative Cloud.

Hello Everyone,
I am looking to purchase a new Apple computer and sign up for Creative Cloud within the next week and I have a few questions that should be answered before I proceed.
My wife and I own a business and we will be using the CS6 apps to create brochures, Constant Contact mailings, product package inserts, edit product photography for print and web use, and short HD how-to videos. We are not graphics professionals or power users and wont be doing anything too complicated.
Any help and answers will be greatly appreciated.
I will start with the hardware questions first:
I am trying to decide between the iMac and the Mac mini.
The iMac is a 2.7Ghz Quad-core Intel core i5 and comes with 4GB of memory that is expandable to 16GB, which I will do for sure. It comes with a Radeon HD 6770M graphics card with 512MB of GDDR5 memory(not upgradable), and a 1TB HDD that runs at 7200RPM. This unit meets the specs required.
The 2.5Ghz Mac Mini comes with 4GB of memory that is expandable to 8GB, I will also do this. It has a Radeon HD 6630M graphics card with 256MB of GDDR5 memory(not upgradable), and a 500GB HDD that runs at 5400RPM. This unit meets all the spec(I think) except for the speed of the HDD.
Question: Will the mini run the software without too much of an issue considering the speed of the HDD?
Question: Will the iMac run the software significantly better to justify the price difference?
I already have 1 mini(purchased 4 months ago, with the same specs listed above) and will be purchasing a second computer for my wifes desk. If the mini will run CS6 fine, that is great and we can save a few bucks. If my mini will not run CS6 well, I will get the iMac for her desk as she will be doing the bulk of the work in that regard anyway.
Now a couple of software questions.
After reading hundreds of reviews and forum posts over the last few days I have seen many people having this or that issue. It seems to me that most of the issues are because of upgrades from Lion to Mountian Lion after installing CS6 first or trying to open CS3,4,5 files in CS6.
If you want to know what issues have me concerned take a look at just this one forum:
http://blogs.adobe.com/jnack/2012/07/adobe-cs-apps-mountain-lion-no-known-issues.html
Similar issues are discussed in the Apple forums as well as many other places around the web.
I am not a computer professional but I know enough to maintain my systems and keep them running smoothly.
We do not have any Adobe software installed on my mini and will not be opening any files from previous versions of Adobe product in the new CS6 software. These will be a clean installs on pristine systems running fully updated Mountian Lion OS's on both machines and creating new files from scratch.
Question: Should I be expecting any issues like the ones I have read in the forums and blogs or are these just the normal things that happen when upgrading to new software with multiple hardware configurations?
My feeling is that we will not be having too much of a problem due to the clean installs and no files from previous versions.
Next up, the Creative Cloud(CC) FAQ states that you can install on 2 machines but can't open stuff at the same time.
Question: Does this mean we can't be using any CS6 apps at the same time or just not using the same app at the same time?
Example: PS and PS on both machines at same time = No, PS on one and Dreamweaver on the other at the same time=Yes?
The CC FAQ page says Adobe will add Lightroom 4 later in 2012 while the main CC page lists it as available now.
Question: Which is true?
My mini is registered to me, with my name, iTunes account, Apple ID etc.
Question: Do I need to do the initial set-up of the new machine with all my information to ensure the CS6 suite works on both machines? Do the computers need to be registered(as far as Apple configuration is concerned) to same person for them to work on one CC account or can I install CS6 on any 2 machines regardless of how they were initially set-up?
This may seem like a silly question but I want to avoid any problems before they happen.
Well, those are all of my questions at the moment. To anyone who made it this far in my looooong post, Thank You so much for your time. I appreciate your expertise and knowledge and hope that you can help me make this decision.
Cheers,
Alex Bogdan

Alex,
I'll try and answer your questions as best I can.
Qn 1 Which Mac.
Ans:- As I understand it both units will run Adobe CS6.
          Which one really depends on what you wand from CS6. If you are looking for high end demand and performance, then I would go for the IMac
          Your Specs for the Imac are right. However if you buy your IMac straight from Apple there are even higher specs.
          You can get:-
                              3.4 GHz i7 processor rather than the i5
                               2GB video card as opposed to a 1Gb video card.
                               Of course such a model will cost you more.
          In the end it is needs compared with money to spend. That is only a decision you cam make.
Q2:- Will the higher cost for the Imac justify copst.
Ans:- Again it depends on what demands you intend to make on the hardware and software.
          But I note you have a business and if that businees expects to high demand and high speedy performance then I suspect the Imac would be more able to provide your needs.
          Again only you will know the answer to that.
Q3:- Questions about CS6 reliability
Ans:- I have been with Adobe for way over 10 years.
         Speaking, only for myself, it is the most reliable software on the market.
          It is true that if you look down this form, like any other and I am thinking about the Apple discussions forum, you will find numerous instances of problems.
          Again this is only my opinion, but although all these problems are real for the individuals:-
          First it is not clear why they have the problem e.g. what have they done or not done.
          Second, they are in the minority of the total users using the hardware / software.
          The only problem I am aware of with CS6 is Acrobat X. I understand it has been sorted Adobe, however it cost me so much work I have removed it from my system and reverted to Acrobat 9
          So what I am saying is that there are only two comapnies I rely 100% on: They are Adobe and Apple.
         So if you are happy with my opinion I would not worry about Adobe CS6
Qn 4:- CS6 0n 2 machines.
Ans:- Yes you will not be able to run the same program similtaneosly.
           I believe, if it is important that you do run the same program together, that you can acquire a further licience from Adobe to do that.
           You would need to contact Adobe about that.
Qn 5:- Lightroom 4
Ans:- Lightroom is now available as part of Creative Cloud.
Qn 6:- Set up for individual machines
Ans:- I do not believe you do. Once you have set up your Creative Cloud account you go to the apps site and download the apps for each machine.
          Each machine downloads the apps and your machine and the apps are registered by Adobe.
         Here is something that you may want to know:-
          Because I was so unhappy loosing all the Acrobat data with Acrobat X I ended up deleting Acrobat X
          However as far as Creative Cloud is concered Acrobat X is still on my machine.
          It is not a problem for me because I am happy with Acrobat 9, it fullfils my needs and has not crashed and lost me all my bookmarks.
          However here is the point:-
          Adobe, when there was a problem with Acrobat X requested that no-one deletes the application.
         Though I do not know for certain I believe registration of the apps you have with Creative Cloud are registered with Creative Cloud in their database. Therefore were you to delete an app, it will still be registered with Creative Cloud and you will not be able to download a further copy even though the app is no longer on your    machine.
          Therefore it maybe not a good idea to delete an app when you no longer have a use for it. If you want it back I suspect you will have to contact Adobe Support
Personal Comment:-
          It is true many unfortunately have had all sorts of problems, including me with Acrobat X.
          That said, Creative Cloud in my view has been a major advance in how Adobe delivers software. I have no regrets with signing up to Creative Cloud and I expect to remain with it.
Hope all of that goes some way to answering your questions.

I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!

I have paid for Creative Cloud - illustrator CC 1 year monthly plan, but it still show "Trial Expired". I have tried to sign in and sign out creative cloud many times, but still can't work. Please help!

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
Also,
This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.

Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

How to create a report in Form line Style and can display Image field?

Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnp

Here you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse. I'll be working on my computer and the thing will freeze. When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally. Then I try safe mood and it will then boot just fine. But there are blue stripes on my screen. The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes. I haven't tried reinstalling my software because I don't have the startup discs that came with my computer. If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed. I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either.
Does anyone else have experience with this? Is it the firmware or what? I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
Please help... Thanks!

I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

How do I get more than one signature option in Fill and sign?

How do I get more than one signature option in Fill and sign?

Hi,
Are you trying to place more than one signature on a PDF document?
Please explain the workflow.
Regards,
Anand

Mid 2010 Macbook Pro sleep and external display problem

I recently upgraded to the new 2010 15 inch core i7 Macbook Pro. The problem i have is that it will not detect an external display (23inch Cinema) after waking from sleep. This happens after using the display to extend the desktop and also when using the Macbook in closed mode.
I've managed to get it to detect the display only after either restarting the Macbook completely or by going into energy saver and switching to dedicated graphics then going back to detect display.
It seems that when on integrated graphics it doesn't register that an external display is connected. If i leave a program open and running that causes the dedicated graphics to kick in then it works ok. If i close all programs, shut the macbook pros lid, computer sleeps and external display shuts off. If i click the mouse to wake with lid closed, apple logo lights, machine starts up few seconds later macbook returns to sleep. If i open the screen the machine wakes as normal but the external monitor doesn't.
Any help is much appreciated as its starting to frustrate me now...
Many thanks
oh and im running OSX 10.6.3

I thought it was intermittent to begin with until i started looking into it. By leaving programs open, like aperture, before i put the machine to sleep it appears to wake the external monitor up without a problem. If i shut all programs or leave basic things open like safari and mail which don't require the dedicated graphics, then upon wake it wont register an external screen is connected.
Manually detecting displays in settings doesn't work.
Disconnecting and reconnecting mini display port doesn't work.
Turning off power to cinema display and powering back up doesn't work.
To get the display going again its either 1) turn off macbook pro and re-boot or 2) re-start the machine then the display is automatically recognised. Or 3) launch a programme that kicks in dedicated graphics then manually go in and detect displays again..... like magic the display then springs to life.
No ideas anyone??

Decimals and sign display

Similar Messages

Maybe you are looking for