Hierarchy Value Selection

Hi,
I have got a cost center hierarchy and data is loaded and everything activated.
When i run the report having the cost center group and press values selection next to the input box, it does not show me the heirarchy ?
Please help ASAP
AMC

For getting Hierarchy Value Selection first the heirarchy needs to be activated. I am sure you might have done this, but just in case this step is missed, take care of it.
Also, I am not sure if you are referring about the variable screen value help or the value help after we get the report executed.
If this is about the variable, then a hierarchy variable needs to be created and assigned in the properties of the infoobject.
Do let us know, if you are looking for soemthing else.
Naveen.A

Similar Messages

  • Hierarchy Value

    Crystal Report was developed on top of SAP BW Query.
    In the BW Query, we have defined the 0ProfitCentre as Hierarchy, and we have variable assigned to this so user can select the Hierarchy.
    In Crystal Report, I have Variable appears under the Parameters.
    The problem is how can I specify the Hierarchy value manually in the "formula"?
    Example, when I click on the Parameter to select the Hierarchy, I can select Hierarchy "CCK", then I can see that this is being
    displayed as the actual value of the hierarchy:
    [0Profit_CTR AMDAMD].[AMD19000000120 0HIER NODE] - CCK
    So if I want to "hardcode" the particular hierarchy node in the formula, what value should use?

    Hi,
    I want one of the "child node" of the hierarchy will always be displayed on the report, and user still can choose other node via varaible. How can we get this "child node" value correctly?
    Also, this is important when we create the Profile Value in CMC ->Profile, where I can specify what Hierarchy value will be added to the Profile Value, and assign it to the Enterprise User in CMC.
    Kindly advise, thanks.

  • Select key date of time-dependent hierarchy before select a hierarchy node

    Hello experts!
    I have a Web Application which has a selection on 0ORGUNIT (organizational unit). The selection is on hierarchy nodes and the hierarchy is time-dependent.
    Because of the time-dependency I have to give a key date for the hierarchy. But I want to select the key date at runtime/execution of the query and additionally I want to select the hierarchy node and other selection criterias.
    Maybe there is a solution to get all this in one pop-up or maybe in two or another solution how I can implement this requirement.
    Thanks for help!
    Peter

    Hey!
    You don't have to use the same presentation-hierarchy like  the selection-hierarchy is which you use for the variable. While presentation-hierarchy always has a key-date, the selection-hierarchy has none. So you see all values for selection but just this which are valid for the presentation-hierarchy are selected. And there is a warning which you can supress over RSRT.
    This solution works for our problem, maybe not for yours, don't know.
    Best regards,
    Peter

  • How to use Hierarchy Filter Selection?

    Hi, experts !
    Could anyone give me a detail for how to use hierarchy filter selection ?
    When i locate a Hier filter selection in the template and execute it, a false info
    accured while filtering data,and the IE inferred the hier node object was missing.
    Then i add another hier filter in the same template, and the secend runs well, however the first one didn't.
    At last, i hide the first one, but the second one can't either.
    Help me !!!
    Thx in advance!

    Thanks Toja !
    Sorry to reply so late !
    The error is line: 51. error:'document.HIERARCHY_MENU_1.NODEID' is null or is not the object.
    The code on line of 51 says:document.HIERARCHY_MENU_1.NODEID.value = i_node;
    Could you please give me some documents on the topic of Hierarchy Filter Selection ?

  • Product hierarchy in select-options.

    Hi Everyone,
    I am using Product hierarchy in select-options.When I run the report for the range of 001500015100015102 to 002500025300025302,It works .However, if i enter just 00150 to 00250 and select the Product Hierarchy 3 (2 or 1) level, i am getting  00150 to 00200.  The data for 00250 does not appear.
    Kindly Help on this ASAP.....................
    Thank you.

    Hi Hyma,
    The Select Option (say SO_PRDHA) OPTION would be filled with between BT in your case. My undersatnding of BT is that for Select Option HIGH it will search for all values less than the HIGH and the value which would be EQUAL to the HIGH. So in your case you will get thos values LESS THAN 00250 and the value which would be EQUAL to 00250(Obviously that doesnt exist). Hence the Result.
    If you still want the 00250 to appear then you can append the SELECT OPTION 
    SO_PRDHA in your program with CP Option
    SO_PRDHA-LOW = '00250*'
    SO_PRDHA-OPTION = CP
    SO_PRDHA-SIGN = 'I'.
    APPEND SO_PRDHA.
    Regards
    Saket Sharma
    Reward Points if useful

  • Plot a chart dynamically based on the values selected

    Hi All,
    I have some requirement like this i want to plot a chart . The chart should change dynamically based on target_name and date. What type of UI should I use ? I tried using multiselect or shuttle for choosing the target_name and date picker tool for date once i choose all this the chart should appear. Can I have a custom button called submit so once all the values are entered it plots chart ? Please help me out with our ideas.
    Thanks in Advance

    Hi,
    Using the dependent value sets you can govern the values which can be selected based on a specific value selected in a particular segment. Example if Country name is selected in segment 1 then specific states names as per the country selected can be displayed in segment 2.
    As per the requirement described you want to enable different fields based on the value selected in segment1, currently there is no standard mechanism available to enable/disable fields based on a value and you will have to do an extension/customization to meet this requirement.
    Thanks,
    Sanjay

  • Report model - number of values selected in DDL param

    Good afternoon,
    I have created a report model that references Teradata views, and I am using this model to populate several datasets in a Report Builder report.  One dataset returns actual results, and the other datasets are used to populate available values for multivalued
    parameters.
    The issue I'm encountering is that some of my parameters return a large number (tens or hundreds of thousands) of selectable values.  When clicking "select all", I'm getting an error, since the concatenated list of values exceeds
    the length limit.  However, since I'm working with a report model, I cannot use T-SQL workarounds such as custom "<ALL>" values/handling.  I also need to limit my result set using these values as parameters, not filters, since I want
    the intensive processing handled in the DB server, not the app server.
    Is there any possible way to accommodate this?  As an example, I have a large (200k+) list of products, belonging to about 7,000 brands.  I want both my product number and brand lists as multivalue parameters...I might want to run
    the report for all products and all brands (returning 200k+ rows), or choose "select all" in the products list, but only pick a few brands (or vice versa).  Cascading parameters (with the first parameter limiting the next set of values)
    is not an option since there are many of these parameters that have too many values for the allowed limit (i.e. even my brand list generated the error when I choose "select all" and only picked a few products).
    I have searched literally dozens of forums and tech sites, all to no avail thus far.  Any assistance will be greatly appreciated...thank you!
    -Chris

    I have a SSRS Report with 4 multi-select parameters.
    The customer has requested that they would like the drill-through to open in a new window.
    I am using Java Script for that purpose.
    However, there is a limit on how long a URL may be.
    Is there a way in a SSRS report to limit the number of values in a multi-select parameter selected?
    Thanks.
    One workaround is to add a internal parameter which will count the number of selected values and will allow the navigation only if the count falls below the threshold.
    For this you can use an expression like below for setting the internal parameter
    Len(Join(Parameters!MultiValuedParameter.Value,","))-Replace(Join(Parameters!MultiValuedParameter.Value,","),",","")
    Then use expression like below for the jump to url/report property
    IIf(Val(Parameters!HiddenParameter.Value)<=<your thresholdvalue>,<report url>,Nothing)
    You can also add a notification textbox on top which will show a message like "Report navigation not possible due to too many values selected" and keep it hidden by default. Then based on above parameter value you can make it visible
    ie make hidden property like below
    IIf(Val(Parameters!HiddenParameter.Value)<=<your thresholdvalue>,False,True)
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Can we generate one report tab for each of the prompt values selected in the bobj 4.0 webi report.

    can we generate one report tab which filters
    with each prompt value selected in bobj 4.0 webi report.

    Hi Shrinidhi ,
    It can be achievable with static tabs created for each LOV .But this is not recommended because , object values can change dynamically .
    It is good idea to use section on prompt object in the report .With sections great feature available is in larger report it’s easy to navigate using map. It displays the section tree.You can select the particular LOV to navigate.

  • Enhancing standard (single select)search help for Multiple value selection

    Hi,
    Standard search help for Business Partner (in cProjects) allows only single value selection for input fields. I want to make this multiple selection.
    Is there a way to do it.
    I used an OVS and built a similar search but its difficult to get the standard options like saving to personal value list etc in it.
    It would be good if there is a way to modify the standard search help to allow multiple selection. Any ideas??
    Appreciate your help,
    Thanks,
    Sri
    Edited by: Sri on Sep 9, 2010 8:50 PM
    Edited by: Sri on Sep 9, 2010 8:52 PM

    As far as I know you can't make a standard ABAP dictionary search help return multiple entries - where you get this sort of functionality the searches don't use the standard Elementary search help framework (e.g. organisational structure searches)
    Given that the WDA search help relies on these dictionary based searches, I'd think very much that you couldn't enhance it to return multiple. how you could even return multiple entries into a single UI element input field is also confusing to me.
    I'd suggest creating a freely programmed value help, it would certainly take quite some effort to recreate those personal value lists etc, but it could be done - I don't like OVS, but that just me.

  • How do I default a multi-select to have all values selected

    Hi all,
    I have a report (standard, not interactive - for various reasons) and I have a number of 'search' fields that the use can use to fulter the results shown. One of these fields is a multi-select list which allows the users to select multiple values at the same time. This is working fine.
    My problem is in setting the default for the multi-select list to have all values selected (either when the page is first opened or when the user clicks a 'reset' button).
    The multi-select query is:
    select
         lv1.description d, lv1.lookup_code r
    from
         tpa_adm_lookup_types lt1,
         tpa_adm_lookup_values lv1
    where
         lv1.lookup_type_id = lt1.lookup_type_id
    and lt1.lookup_type = 'RELEASE_PHASES'
    and     lv1.delete_flag = 'N'
    order by 1
    how do I get it to default to everything selected?
    Many thanks,
    Martin

    Hi Andy,
    Yes it is a dynamic list so a fixed default is no good.
    I have built the field with a source (when session state is null) of:
    with data as (
    select lookup_code, row_number() over(order by lv1.description) rn,count(*) over () cnt
    from tpa_adm_lookup_values lv1,
         tpa_adm_lookup_types lt1
    where lv1.lookup_type_id = lt1.lookup_type_id
    and lt1.lookup_type = 'RELEASE_PHASES'
    and lv1.delete_flag = 'N'  )
    select ltrim(sys_connect_by_path(lookup_code,':'),':') catvalues
    from data
       where rn = cnt
       start with rn = 1
       connect by prior rn = rn-1;which works but I was hoping ApEx had a cleaner solution.
    Regards,
    Martin

  • How to capture the value selected in the drop down box

    Hi all,
    I am populating values in  drop down box by using FM vrm_set_values in module pool.
    like below
    01  ABC
    02 ACB
    03 BCA
    04 CAB
    in module pool drop down box element name is RQGM-VALUE.
    Problem is what ever the value is select in the drop down box from above element RQGM-VALUE is not filling any value.
    i need to capture the value selected in the drop down box and pass it to another variable.

    Hi,
    Refer this standard code. Your issue will be resolve.
    REPORT demo_dynpro_dropdown_listbox.
    TYPE-POOLS vrm.
    DATA: name  TYPE vrm_id,
          list  TYPE vrm_values,
          value LIKE LINE OF list.
    DATA: wa_spfli TYPE spfli,
          ok_code TYPE sy-ucomm,
          save_ok TYPE sy-ucomm.
    TABLES demof4help.
    name = 'DEMOF4HELP-CONNID'.
    CALL SCREEN 100.
    MODULE cancel INPUT.
      LEAVE PROGRAM.
    ENDMODULE.
    MODULE init_listbox OUTPUT.
      CLEAR demof4help-connid.
      SELECT  connid cityfrom cityto deptime
        FROM  spfli
        INTO  CORRESPONDING FIELDS OF wa_spfli
       WHERE  carrid = demof4help-carrier2.
        value-key  = wa_spfli-connid.
        WRITE wa_spfli-deptime TO value-text USING EDIT MASK '__:__:__'.
        CONCATENATE value-text
                    wa_spfli-cityfrom
                    wa_spfli-cityto
                    INTO value-text SEPARATED BY space.
        APPEND value TO list.
      ENDSELECT.
      CALL FUNCTION 'VRM_SET_VALUES'
           EXPORTING
                id     = name
                values = list.
    ENDMODULE.
    MODULE user_command_100.
      save_ok = ok_code.
      CLEAR ok_code.
      IF save_ok = 'CARRIER' AND NOT demof4help-carrier2 IS INITIAL.
        LEAVE TO SCREEN 200.
      ELSE.
        SET SCREEN 100.
      ENDIF.
    ENDMODULE.
    MODULE user_command_200.
      save_ok = ok_code.
      CLEAR ok_code.
      IF save_ok = 'SELECTED'.
        MESSAGE i888(sabapdocu) WITH text-001 demof4help-carrier2
                                            demof4help-connid.
      ENDIF.
    ENDMODULE.

  • Reporting: Multi-value select prompt

    Multi-value select prompt:  Need to verify if there is a limit to the number of items/size in a drop down list or if there are selected value limitations.

    Hi Rick,
    To clarify,  which type of parameters will you be using,  Dynamic or Static?   If you're using dynamic parameters (LOV's or Business Views) there is a limit on the display values,  but I am not aware of a limit on the input limit for multiple values.
    If you're using a dynamic parameter which will use an LOV or Business View the registry key value to increase can be found:
    HKLM > Software > Business Objects > Crystal Report > Database Options > LOV
    MaxRowSetRecords
    Regards,
    Wallie

  • Cond display of drop down based on value selected in another drop down form

    Hi,
    I have a requirement in my app in which I need to be able to conditionally display the values in the drop down down list based on the values selected in another drop down list...
    Currently I have 2 drop downs.
    First drop down is a list of Jacks from 2000 to 4999...
    Second Drop down consists Chassis ranging from 1 to 900..
    So when a user selects any jack between 2000 - 2999, in the second drop down only Chassis ranging from 1 to 300 should appear.
    when anything between 3000 - 3999 is selected, Chassis ranging from 301 to 600 should appear..
    and for jacks between 4000 - 4999, Chassis ranging from 601 to 900 should appear in the second drop down.
    Can someone please provide me pointers on how to do this..
    Thanks,
    Nehal

    Hi Larry,
    Thanks for your response..
    Here are the queries for my select lists.
    P62_JACK
    select list query for Jacks:
    select JACK_NUM display_value, JACK_NUM return_value
    from CTS_LIST_OF_JACKS
    order by 1
    P62_CHASSIS_BLADE_PORT
    select NETWORKPORT display_value, NETWORKPORT return_value
    from CTS_LIST_OF_NETWORKPORTS
    order by NETWORKPORT_ID
    jacks range from 2000 to 4000
    chassis_blade_port ranges from 100 to 900...
    Can you please let me know how to do it..
    Thanks,
    Nehal

  • Contents of second prompt list based on value selected in first prompt?

    I need to display two prompts: "Product Family" and "Products". When the user selects a product family, I need the list of products to be filtered to the selected product family. In other words, the contents of the second prompt's list needs to be based on the value selected in the first prompt. Can this be done in Web Intelligence?

    Hello Waters,
    Yes, this can be done in web intelligence if you apply cascading prompts at universe level
    or
    Yes, the second way is use element link in report block between 2 tables one for product family and one for product list ( you don't need prompts in this case...)
    Regards
    Subbarao M

  • How to Add/Concatenate to a text field, values selected in a combo box

    I have a combo box form field that allows the user to select a value from a list and click on an Add button. The Add button should add/concatenate the vaue selected to a text field in order to create a list of values selected. I'm not sure how to do this using Javascript in Acrobat? I know I need to add the javascript to the Add button's Mouse Up action. Any help would be greatly appreciated. Thanks!

    Thanks so much - it works!
    >>> "Gilad D (try67)" <[email protected]> 9/25/2013 9:16 AM >>>
    Re: How to Add/Concatenate to a text field, values selected in a combo box created by Gilad D (try67) ( http://forums.adobe.com/people/try67 ) in JavaScript - View the full discussion ( http://forums.adobe.com/message/5712118#5712118 )
    Let's say the text field's name is "Text1", and the combo is called "Combo1". You can then use this code as the MouseUp script of the Add button:
    var f1 = this.getField("Text1");
    var f2 = this.getField("Combo1");
    if (f1.value=="") f1.value = f2.value;
    else f1.value = f1.value + ", " + f2.value;
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5712118#5712118
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5712118#5712118
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5712118#5712118. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in JavaScript by email ( mailto:[email protected].com ) or at Adobe Community ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=3286 )
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for