High level and low level grabs

Hi, I'm looking at different acquisition options. Fast acquisition is a priority as is fast processing. I'm a little confused on high level versus low level. Is there any benefit to which one is used? Or is it 6 one way and 1/2 a dozen the other. Thanks

If you feel comfortable using the Low Level functions I would personally recommend using them instead of the High Level. Bruce's answer is correct, high level will call low level with standard options selected. If you think of ways to improve the speed of your code, you may want to use low level, my reason is because high level VIs will actually be a function call calling other functions, which introduces a minimum delay, instead, if you use low level you are directly calling the functions for acquisition so there is kind of a small time saving if you think of it as acquisition wise.
Also, the high level VIs if you check their block diagram it has more structures for error checking, session ID checking, etc., so with low level you have direct control over the acquisitio
n from your main program without introducing innecessary structures or functions.
Regards,
Nestor Sanchez
IMAQ/Motion Support
National Instruments
Nestor
National Instruments

Similar Messages

High level user and Low level user

Hi to all gurus,
How SAP diffrentiates between high level user and low level users?? I mean if the licences are for 25 high level user and 50 lowevel users, than how SAP will categorize the high level and low level user licenses?? Is there anyway where BASIS person has to specify??
Thanks and Regards,

Ask your SAP Account Manager, he will be happy to explain it for you.
Regards
Juan

Question about CHKDSK ,S.M.A.R.T and low level format

hi,
I like to know the difference exactly between CHKDSK and S.M.A.R.T and low level format program(I know that low level format writes zero"s) I mean besides the low level format writes zero's what onother
benefits it has , it repairs some bad sectors or mark bad sectors ect?
very short explanation wil be enough.
thanks
johan
h.david

H.david
1-CHKDSK http://en.wikipedia.org/wiki/CHKDSK CHKDSK verifies the
file system integrity on
hard disks or
floppy disk and fixes logical file system errors.
2-S.M.A.R.T http://en.wikipedia.org/wiki/S.M.A.R.T. smart is a monitoring system for
computer
hard disk drives (HDDs) and
solid-state drives (SSDs)<sup class="reference" id="cite_ref-1">[1]</sup> to detect and report on various indicators of reliability, in the hope of anticipating failures.
3-Low level formatting http://en.wikipedia.org/wiki/Low_level_format
Wanikiya and Dyami--Team Zigzag

How deep test and low level format a hard drive ?

I am looking for an program to deep test and low level format my hard disc.
Comparable to the manufacturer programs in the windows or dos world, like IBM Drive Fitness TEST.
1. I need an printed state conditioning diagnosis.
2. I want to relocate the blocks and masking the bad blocks.
3. data recovery nonrelevant
How are bad blocks treated in Apple Disc Utility.
Released FWB an hard disc toolkit version for mac os x?
How can i see all S.M.A.R.T. status informations in the terminal.(beyond the resume in Apple Disc Utility)

Your best bet is to copy anything that you want to save to another drive and then erase and format it MS-DOS FAT-32 for cross platform sharing or Guid / Mac OS Extended for Mac only use.

Infoobject for technical level and professionel level

Now, we want to create infoobject for technical level (e.g. high, middle, primary) and professionel level(e.g. high, middle, primary), should we create these kind of infoobject with time dependent, e.g. let's say, last year person A has technical level with middle, but this year start person A was promoted to high level.
1) should we consider about this kind of infoobjects with time dependent?
2) should we make 0datefrom and 0dateto as attr. of infoobject technical level and professionel level?
which idea is correct? Pls share your experience. Thanks!
Edited by: hi ni on Apr 19, 2008 5:37 AM

Hi Nilesh,
For overall release, please tick the overall release indicator for the PR document type.
Path > MM>PUR>PR>Define Document Types. For the particular document type tick the overall release indicator.
This can be done to the particular release group as well
Path->MM>PUR>PR>Release Procedure>Procedure with Classification>Set Up Procedure with Classification. For the particular release group tick the Overall release indicator.
Regards,
Raj

How to improve the query performance in to report level and designer level

How to improve the query performance in to report level and designer level......?
Plz let me know the detail view......

first its all based on the design of the database, universe and the report.
at the universe Level, you have to check your Contexts very well to get the optimal performance of the universe and also your joins, keep your joins with key fields, will give you the best performance.
at the report level, try to make the reports dynamic as much as you can, (Parameters) and so on.
and when you create a paremeter try to get it match with the key fields in the database.
good luck
Amr

Dunning Old dinning level and dunning level

Hi experts,
I have one issue in dunning. the issue is where the dunning history for particular customer shows as old dunning level as 3 and dunning level as 2.
i have checked the customer master there is change in the dunning procdure. But the document and master data shows the correct dunning level with the new procdure.
so i didnt understand what is the OLD dunning level and dunning level for the same cusomer. the issue is only with one customer.
I have also checked with old procdure with same customer in table MHNK. there are some notices done. but how come the current invoice shows the old dunning level for the same invoice.
can any once explain me how to proceed.
Regards
Ashok

Hi
Thnks for the reply so we need to apply this note for making the old dunning level and dunning level makes equal after you run the program.
Also one more doubt, since i have observed that the dunning after the parameters entered. looks like this
Parameters were maintained
Dunning selection executed, job deleted
Dunning notice printed, job deleted.
the above doesnt means that they will update the old dunning level right.
Regards
Ashok

Whats the difference between high-density and low-density ram?

I bought what I thought was supposed to be a cheap 256 mb chip (pc100 or 133) but the g4 400 read only 128mb, The fellow in the store that sold it flipped out when I told him I had a Mac and said something about high density and low-density.Another guy in the store described it as being one sided and two sided.
I don't know what my machine needs. I got my money back but he would'nt let me exchange the chip for another, me thinking it was simply mislabeled.

The QuickSilvers use PC-133 SDRAM and are compatible with high-density memory chips (256 Megabit), so that 16-chip 512 MB and 8-chip 256 MB non-ECC DIMMs are supported. A low density, 16-chip (128 Megabit) 256 MB DIMM is also supported.

Schema level and table level supplemental logging

Hello,
I'm setting up bi- directional DML replication between two oracle databases. I have enabled supplemental logging database level by running this command-
SQL>alter database add supplemental log data (primary key) columns;
Database altered.
SQL> select SUPPLEMENTAL_LOG_DATA_MIN, SUPPLEMENTAL_LOG_DATA_PK, SUPPLEMENTAL_LOG_DATA_UI from v$database;
SUPPLEME SUP SUP
IMPLICIT YES NO
-My question is should I enable supplemental logging table level also(for DML replication only)? should I run the below command also?
GGSCI (db1) 1> DBLOGIN USERID ggs_admin, PASSWORD ggs_admin
Successfully logged into database.
GGSCI (db1) 2> ADD TRANDATA schema.<table-name>
what is the deference between schema level and table level supplemental logging?

For Oracle, ADD TRANDATA by default enables table-level supplemental logging. The supplemental log group includes one of the following sets of columns, in the listed order of priority, depending on what is defined on the table:
1. Primary key
2. First unique key alphanumerically with no virtual columns, no UDTs, no functionbased
columns, and no nullable columns
3. First unique key alphanumerically with no virtual columns, no UDTs, or no functionbased
columns, but can include nullable columns
4. If none of the preceding key types exist (even though there might be other types of keys
defined on the table) Oracle GoldenGate constructs a pseudo key of all columns that
the database allows to be used in a unique key, excluding virtual columns, UDTs,
function-based columns, and any columns that are explicitly excluded from the Oracle
GoldenGate configuration.
The command issues an ALTER TABLE command with an ADD SUPPLEMENTAL LOG DATA clause that
is appropriate for the type of unique constraint (or lack of one) that is defined for the table.
When to use ADD TRANDATA for an Oracle source database
Use ADD TRANDATA only if you are not using the Oracle GoldenGate DDL replication feature.
If you are using the Oracle GoldenGate DDL replication feature, use the ADD SCHEMATRANDATA command to log the required supplemental data. It is possible to use ADD
TRANDATA when DDL support is enabled, but only if you can guarantee one of the following:
● You can stop DML activity on any and all tables before users or applications perform DDL on them.
● You cannot stop DML activity before the DDL occurs, but you can guarantee that:
❍ There is no possibility that users or applications will issue DDL that adds new tables whose names satisfy an explicit or wildcarded specification in a TABLE or MAP
statement.
❍ There is no possibility that users or applications will issue DDL that changes the key definitions of any tables that are already in the Oracle GoldenGate configuration.
ADD SCHEMATRANDATA ensures replication continuity should DML ever occur on an object for which DDL has just been performed.
You can use ADD TRANDATA even when using ADD SCHEMATRANDATA if you need to use the COLS option to log any non-key columns, such as those needed for FILTER statements and KEYCOLS clauses in the TABLE and MAP parameters.
Additional requirements when using ADD TRANDATA
Besides table-level logging, minimal supplemental logging must be enabled at the database level in order for Oracle GoldenGate to process updates to primary keys and
chained rows. This must be done through the database interface, not through Oracle GoldenGate. You can enable minimal supplemental logging by issuing the following DDL
statement:
SQL> alter database add supplemental log data;
To verify that supplemental logging is enabled at the database level, issue the following statement:
SELECT SUPPLEMENTAL_LOG_DATA_MIN FROM V$DATABASE;
The output of the query must be YES or IMPLICIT. LOG_DATA_MIN must be explicitly set, because it is not enabled automatically when other LOG_DATA options are set.
If you required more details refer Oracle® GoldenGate Windows and UNIX Reference Guide 11g Release 2 (11.2.1.0.0)

How to load item level and location level member in demantra

This is in context where we are not using any integration of demantra with either Ebiz or E1 system.
Data is present in flat file.
As per i know, integration interface can only export the data for item level and location level but can not import data for these level.
the second thing i know is that when we create data model then load_data.bat file should have been created in Demand Planner/Desktop directory. But this didn't got created. So i am not able to use load_data.bat file for uploading data.
The third place ,i think is from worksheet thru edit method ( i am not sure about this).
But i want to upload the data in bulk for item level and location level. Can it be done without any customization i.e without creating any sql loader file etc ??

Hi Abhishek,
The standard practice to load data for items/ locations and sales is through the DATA MODEL definition only. One should use LOAD_DATA.BAT file in normal scenario for loading data into Demantra staging tables from tEXT files.
In case you are having trouble with loading data using LOAD_DATA.BAT file, then do the following:
- modify your DM definition to Data tables instead of flat files
- use SQL loader to upload data in correct format into Demantra's staging tables "T_SRC_XXX"
- Run EBS Full Download workflow to download data into demantra's main tables.
Integration interfaces should not be used to load basic sales data into Demantra.
Hope this helps.
Thanks
Raj
(http://oracledemantra.blogspot.com)

What are Header Level, Item Level and Schedule Level data?

Hi ,
Can anyone plz explain me what are Header Level, Item Level and Schedule Level Data in the R/3 system , means what actually is the data structure they contain. If is there any document or links available plz do send. Urgent.
Thanks
Prashant singhal

Hi Prashant,
check this link.
[Extractors;
Regards,
Harold.

[svn] 696: Added package level and class level javadoc, where is was missing.

Revision: 696
Author: [email protected]
Date: 2008-02-29 11:49:08 -0800 (Fri, 29 Feb 2008)
Log Message:
Added package level and class level javadoc, where is was missing.
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/AnonymousObjectGraph.jav a
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Array.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/AtEmbed.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/AtResource.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/LineNumberMapped.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Model.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MovieClip.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/MxmlDocument.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Primitive.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/Script.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/XML.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/XMLList.java
Added Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/package.html

Hi,
The javadoc is generated to directory /home/usr/doc and I have added a package.html as mentioned. But no change found.
There is also no package directory in the /doc.
My original problem is that in the index.html, there are three frames, the right hand side frame showing the overwiew. In the overview page, there is the table of packages with two columns, the left columns showing the package name, while the right column showing blank.
How to generate comments to the right column in the table in the right hand side frame in the index.html?
Thanks,
Wing

Capture Excise on Purchase through 1st Level and 2nd Level

Dear all,
Please clear about the Functionality to Capture Excise on Purchase through 1st Level and 2nd Level Dealer Invices in details please.
Regards,
Vishal

hi,
for dealer invoice we first do j1iex here we capture the excise duties
then we do migo &
again we do j1iex to post the excise invoice.

DIFFERENCE BETWEEN SINGLE LEVEL AND MULTI LEVEL COSTING

Sir,'
Please explain the difference between Single Level and Multi Level Costing in Detail
thanking You

While using material ledger, we can use the single level or multi-level price determination for valuation of inventory.
Procurement processes are used in Product Cost Controlling to determine procurement costs and to present those costs. Purchase Order, for example, is single-level procurement and Production is multilevel procurement.
Single-level material price determination calculates the periodic unit price for a material. The standard price and the cumulative single-level differences of the period are taken into account. Single-level material price determination takes into account the differences that arise directly when a material is procured.
Multilevel price determination calculates the periodic unit price for a material. The standard price, the single-level differences cumulated in the period, the differences between planned and actual prices, as well as input material differences (multilevel differences) are all taken into account.
Single-level material price determination is a prerequisite for Multi-level price determination.

High bytes and low bytes?

What are high bytes and low bytes? Thanks for helping.

This may not be enough information to answer your question. How and where are the terms High bytes and Low bytes used?
Often, a data type is represented using multiple bytes. For example, short is 2 bytes. Sometimes the most significant byte is the high byte while the least significant byte is the low byte.

High level and low level grabs

Similar Messages

Maybe you are looking for