High noise when I hold my ipod close to the ear...

Hello, when I hold my ipod nano 2nd generation close to my ear I hear a verry high noise (not verry loud) if its turned on..
I compared this problem with other ipods of the same generation and there was no noise..
I think there maybe some defekt in my ipod but I don´t know what it could be...
Maybe you guys know something about it, thanks for your help, greetings, Matthias.

Mike,
Great to hear that you like my blood, must find a way to commercialise it.
Hope all will good with your iPod, unfortunately, the same trouble will come again, as Apple and Microsift keep trying to upgrade the iTunes, and Windows and stealthily put in drivers that bugger up our stuffs.
Apple innovations, Mac, iMac, iPod, iPhone, iPad are fantastic on first release, it is only after the Project Team hand over to the Product Development Team, that we get all ***** in the system.  But then they generate money from the product upgrades.
It been my pleasure to share my iPod experience. and as you say in Oz, "Hv a gud day mate!"

Similar Messages

  • Is there a way to set up a dial tone or a way for someone who is hard of hearing to have the phone set up to make a noise when I hold it up to my ear?

    Is there a way to set up an dial tone or set the phone up to make a noise when I hold it up to my ear when i use it

    I'm also not sure what you want to accomplish by this. Until you hit the "call" button, the phone is not 'off hook' like a traditional landline would be. There is no such thing as a dial tone on any cell phone. The dial tone was simply a carrier signal from the central office that prepared that end to listen for the pulses (later tones) generated when you dialed.

  • Bottom sheet of metal seems loose. It makes a noise when I put pressure on it, and the screw looks slightly misplaced.

    MacBook Air - Bottom sheet of metal seems loose. It makes a noise when I put pressure on it, and the screw looks slightly misplaced.

    loctite (liquid plastic bonding agent for screws) broke loose holding a screw to the bottom plate.
    make an appt. with your local Apple store for a quick fix, easy remedy.

  • When I plug my ipod touch into the computer it just charges and won't appear on itunes!

    when I plug my ipod touch into the computer it just charges and won't appear on itunes!

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • I  bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

    I  bought an ipod touch 5 from Dubai carrefour. Th seller told me that the ipod that ı bought has a facetime . But when ı want to activate ipod ı couldnt see the facetime app. Please show me how ı could activate facetime.

    If FaceTime is not hidden by Restrictions (Settings>General<Restrictions) you got duped. iPods officially sold in Dubai and some other countries that prohibit FT do not have FT and there is not way to get FT on those iPods.

  • Any ideas why a film I have  converted to mp4 format, that plays with sound through my PC windows media file- only has a picture but no sound when transferred to my ipod touch via the Itunes?

    Any ideas why a film I have  converted to mp4 format, that plays with sound through my PC windows media file- only has a picture but no sound when transferred to my ipod touch via the Itunes?

    See:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos

  • When I plug my ipod touch into the pc, it tells me:the ipod cannot be used because the apple mobile device service is not started. What does this mean and how do I get rid of that and enable syncing?

    When I plug my ipod touch into the pc, it tells me:the ipod cannot be used because the apple mobile device service is not started. What does this mean and how do I get rid of that and enable syncing?

    Hello Julia,
    Start with this article.
    http://support.apple.com/kb/ts1567
    B-rock

  • HT2476 I have just downloaded Mountain Lion for my MacBook Pro and now when my applications open they close and the error "This has just quit unexpectedly" message pops up. Does anybody know what is happening?

    I have just downloaded Mountain Lion for my MacBook Pro and now when my applications open they close and the error "This has just quit unexpectedly" message pops up. Does anybody know what is happening/how to fix it?

    Welcome to Apple Communities
    Press Command and R keys in boot and reinstall

  • My iphone 4 is not wanting to light up at all ,making noise when getting calls etc. what could be the problem?

    I was trying to figure out why there was a cricle with a lock image in it on the top of my phone , so i was going through settings and couldnt find anything that was out of ordinary .so then i was trying to make room for a software update.The only thing i changed was was putting the little on screen help button. Then phone frozen after i was going through settings again to figure out the cricle and lock image on my home page. Then after a cetain amount of time, When screen time went out it wouldnt let me turn back on screen. But it will make noises from calls and texts and ect still when they come in. But it will not light up when calls or texts come through or notifications. It wont light up when i try to unlock it and or change the volume settings. My screen is blank and black but is still making sounds as if it was still on and working with no picture. Front camera still takes pictures when you hold down top and middle buttons but still not image on screen. Is there any suggestions that i can do myself or do you think i need to take it in myself to have it fixed?
    Thank you so much,
    Grace Wilson
    <Email Edited by Host> .

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • Electrical noise when a white background is displayed on the screen

    My iMac 27 mid-2010 got the LCD and graphics card replaced recently, due to the infamous dark spots on the display and some other video problems (vertical dotted lines on the screen).
    Those issues are fixed, but now I have a new problem that didn't exist before the repair:
    There is an annoying high-pitched electrical noise, but only when a white background is displayed on the screen. For example: When I open a blank page in Safari, the noise comes up. If I switch to another tab with a black background web page, the noise disappears.
    The noise is perfectly noticeable, and very annoying, when using the computer in a silent room. It is not related to display brightness, since it's always there no matter what brightness level I set.
    The Genius in the local Apple Store was able to hear it, so it's not a problem of perception. But he could neither find the cause nor solve the issue, so he returned the computer to me, with a vague 'its a normal noise, maybe caused by the CPU or the graphics card when they have to display white backgrounds'.
    Well, the thing is, this noise wasn't there before the LCD/graphics card replacement. I'm pretty sure about it, since I have been using this computer in a daily basis for the past two years and I know each and every noise that comes out of it.
    I would like to ask if any of you know of this problem. I've done a lot of searching in the internet, but couldn't find anything about this noise in particular.
    Thanks,
    Miguel

    Hi, thanks for your suggestion.
    Unfortunately, they have made up their mind about this issue. I even talked to the Store Manager, asking for a solution, but he pretty much ignored me saying he had full confidence in his team: if the genius says the noise is 'normal', then there's nothing more to discuss. Full stop.
    They just replaced a fan, which didn't solve anything, because the noise is clearly electrical in nature, NOT mechanical. I suspect it's related to capacitor resonance in the graphics card. The display and LED backlight panel seem to be OK, since the noise is not heard when I use the mac in target display mode via the mini-displayport input.
    I gave them this information in order to help with the diagnosis, but they didn't even bother to write it down.
    So far, the Apple Technical service seems very un-professional to me. I'm stuck with a defective computer for which I've paid 2.000 euros + Apple Care.
    Well, in this case, Apple doesn't Care at all. I can't even find an email address where I can submit a written formal complain.
    (Sorry for the rant)

  • Often, when I connect my iPod Touch to the PC, instead of it showing up as a device in iTunes, a window pops up that says I have connected a camera, and asks what to do.  It is really annoying when this happens, because sometimes I cannot update my iPod

    Often, when I connect my iPod Touch 2G to the PC, instead of showing up as a device on iTunes, a pop-up appears that says I have connected a camera and asks what I want to do.  This device doesn't have a camera in it.  When this happens, (not always)I can't update my iPod, no matter how many times I try to connect it.  I have an old Nano that has never had this problem at all.  Can anyone tell me what to do about this?

    Try here:
    iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP

  • When i connect my ipod touch to the computer and it brings up itunes, and it starts syncing, it just stays on the last step(6) and I can't download anything else to my ipod.

    I connected my ipod touch to the computer.  When it brings up itunes and start to sync, it stalls at the last step (6).  This keeps me from being able to add other songs from my library to my ipod.  I'm very new at this and maybe just don't understand how it works. 

    Try here:
    iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP

  • When I sync my IPod it remembers the plays and doesn't count them from 1 even though I reset the play count, any fix?

         The problem is I like to track my play counts and like it to be correct, and it was having some errors so I reset my plays on all my songs however when I sync my iPod it will remember the amount of plays for example, if I play a song once on my iPod and then sync it it will have 1 play, then if I reset the play count back to 0 and play it on my iPod again when I sync it again it will give it a play count of 2 and so forth as many times as it gets played.
         I have an iPod touch 5, the most recent iTunes update and the most recent iPod software (iOS 8.1) and am using windows 7, but I think the problem comes from the iPod because if i reset the plays and play a song through iTunes it will go to 1, but if i listened to it 3 times on my iPod when i sync it, it will then go to 4.
         I have tried restoring the iPod and syncing it so there is no music on it and then putting it all back on but the problem persists. The only other thing i can think to do is uninstall/re-install iTunes but I'm worried if I do that it will delete my music. That is not a big deal as I have back up files elsewhere on my computer but I also have album art, lyrics etc. for all my 1077 songs and id rather avoid having to get it all back.
         Anyone know how to correct this or is perhaps having a similar problem?
    Thanks, Sean.

    If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
    Follow the instructions here: iPhone and iPod touch: Unable to update or restore

  • When I plug my ipod shuffle into the usb port of my computer, it now longer displays as a devkice plugged in. Thkis makes it impossible to transfer a new playlist to my ipod. Any suggestions?

    When I plug my ipod shuffle into my usb port, it no longer shows as a "device" over to the left. This makes it impossible to to transfer a new playlist to my ipod. Any suggestions?

    Hi deaconspeaking,
    Welcome to Apple Support Communities.
    Try looking for the iPod below the Search field in iTunes. If it doesn't show up below search, the second article provides troubleshooting tips that should help you out.
    iTunes: Syncing media content to iPod
    http://support.apple.com/kb/ht1351
    Click the button with your device's name, below the Spotlight window.
    In the main iTunes browser window, select Music.
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    -Jason

  • Each time the firefox will make com hangs awhile when ply a sound, after close firefox the problem solved.

    When Firefox opened, and the system ply a sound, the com will hang awhile, but after I close Firefox, the problem solved itself, if I disable all plugins, the problem solved, can help check which plugins will cause this problem or this is Firefox problem???
    == This happened ==
    Every time Firefox opened
    == ply a sound

    I changed the setting, but unfortunately, this didn't fix the problem. This situation does seem to occur more, when I load or reload my eBay home page. I noticed that all data and information would go ahead and load, but the random ads bar would not immediately load and when I would left click anywhere on the page, Firefox would temporarily freeze, the page turns white, Firefox not responding will display, and then the banner would load and everything is fine. I'm wondering if it has something to do with my Flash Player. Any additional suggestions would be greatly appreciated. Thanks! Reggie

Maybe you are looking for

  • Is there a way to print an outline of your keynote that fits the whole page?

    I want to be able to just print the outline notes for my keynote.  When I go to print and choose outline, the outline appears, but it is very small and only takes up the left side of the paper.  I want the outline to fit the whole printed page.

  • Regarding : Selecting the adapter type in ID

    Hi, While creating the scenario in Integration Directory using wizard we will get an option of selecting sender adapter type & receiver adapter type. But while creating  manually , I am not getting the option of selecting the adapter type. Please spe

  • Automatic leave approval

    Hi Gurus, I am getting some problem in leave approval through workflow. While I am applying any leave through transaction PTARQ its s approved automatically as it should. But when I am doing the same in production it is not working. the status of lea

  • Sound/Wifi switch buttons not working

    Hi, I just booted my computer (pavilion dv6-1120ek) up today & the tactile board isn't working anymore. The light is glowing, but doesn't react to my touch. Now I can only control sound via sound panel in Windows, but the real problem is the wi-fi, w

  • HT5622 why cant i send message in imassage when i have logged in to my apple id

    please help me i cant send massages on imassage why?