High score functionality via call to external server

I have just packaged an existing Flash game as a test and literally just packaged it without making any changes whatsoever. The game included a top 100 score board which is populated by calling an asp page on an external server that returns xml data.
I was most surprised that the high score functionality all worked when I tested the game on my iPhone i.e it displays the scores. I haven't tested submitting one yet though.
I therefore wondered if this is allowed and if so is there any reason why this should be avoided. I have read there is something called Open Feint that allows you to do high scores.
Any advice much appreciated.
Thanks
Paul

Hi,
where exactly is the FM crashing and why? Did you debug? Is it occuring at
CALL FUNCTION 'FTP_CONNECT' DESTINATION RFC_DESTINATION
     EXPORTING USER = USER PWD = PASSWORD ACCT = ACCOUNT HOST = HOST
               TRACE = FTP_TRACE GUSER = GATEWAY_USER
               GPWD = GATEWAY_PASSWORD GHOST = GATEWAY_HOST
     IMPORTING HANDLE = HANDLE ERROR = CERROR
     EXCEPTIONS SYSTEM_FAILURE = 1 COMMUNICATION_FAILURE = 2.
or earlier?
Try tracing with ST01, one time with the way it works, and another time out of the WebDynpro where it crashes, then compare the logs.
regards, Lukas

Similar Messages

  • How to call an external server from Webdynpro program?

    Hi All,
    i have a requirement in which i have to call an external server from Webdynpro ABAP program.
    how to imp

    hi ,
    do u mean u need to call the external link from ur WD ABAP application ?
    if so , u either create
    1 a Link to URL ( LTU ) UI element  and call the external link using that
    2 if u wish to use some other fuctionality and thn wish to call the URL in ur application ,u write this piece of code in ur relevant on Action method :
    data:  lo_window_manager type ref to if_wd_window_manager.
    data:  lo_api_component  type ref to if_wd_component.
    data:  lo_window         type ref to if_wd_window.
    data:  ld_url type string.
    lo_api_component  = wd_comp_controller->wd_get_api( ).
    lo_window_manager = lo_api_component->get_window_manager( ).
    ld_url =  ''.  // ur external sever link here
    CALL METHOD lo_window_manager->CREATE_EXTERNAL_WINDOW     
    EXPORTING     URL                = ld_url           
    RECEIVING     WINDOW         = lo_window.
    lo_window->open( ).
    I hope u wud be able to create URL now .
    regards,
    amit
    Edited by: amit saini on Oct 13, 2009 11:25 AM

  • Webdynpro ABAP webservice call to external server  - Cookie issue

    Hi,
    We are experiencing cookie issue while calling webservice to Tivoli system hosted on IBM websphere.
    Steps we have done as follows:
    1. Created a ABAP Proxy class from Tivoli WSDL.
    2. Configured T-Code LPCONFIG to point to above proxy class and logical port.
    3. Configured  SM59 RFC connection to point to Tivoli server using basic authentication mechanism (User ID/Password).
    4. Called webservice method from WebDynpro ABAP program.
    After above steps, we are able to call the webservice method successfully but second time we are experiencing Cookie being adding to the request and eventually no response back to our program.
                When we investigated this cookie issue with IBM Websphere people, they says thay have enabled SSO Config instead of basic authentication and that's why a cookie is being added to the request and fails. when they disabled SSO, we are able to call webservic method sucessfully sevaral times. but now this cannot be no longer disabled as other applications are using SSO enable option. So, we are thinking, is there something that can be done in SAP ECC itself as we see the option of using SSO in SM59 instead of User Id/Password but not sure How?
    If anybody has undergone this scenario/SSO config from ECC SM59 successfully, Please reply back.
    Thanks in advance
    Praveen

    Here is the link that explains how SSO can be configured in SAP.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/65/6a563cef658a06e10000000a11405a/frameset.htm
    Once done, under Client PSE in Tcode STRUST, you can upload the certificate obtained from the SSO enabled system and use the client PSE (Default)  in the SSL Client Certificate area of SM59
    I see Thomas has already responded to you and he has written a blog on how to set this up as well.
    KK

  • HELP: Can't get iMac users to authenticate via OpenLDAP on external server

    Faculty policies require only registered students may use our iMacs. So I need to set up 20+ machines to allow login after authentication via OpenLDAP (directory replica stored on a remote server at ldapdir.myorg.com).
    (1) Is it possible to configure the login window to automatically redirect login attempts with username&passwd to the remote directory? How?
    (2) How do users reach this server when fast user switching is ON?
    Thx
    - HM -

    Hi
    Is it possible to configure the login window to automatically
    redirect login attempts with username&passwd to the remote
    directory? How?
    Yes. System Preferences > Accounts > Log in Options > Switch off automatic login
    (2) How do users reach this server when fast user switching is ON?
    MCX supports fast user switching at the Machines level (Computer lists) just enable the feature by clicking the appropriate button. Of course you would have to bind the clients to the LDAP Server first. Applications > Utilities > Directory Access. Select the LDAPv3 Plug in and click Configure, click Show Options and click new. Add the IP Address of the LDAP Server in the address field and click continue. For the FQDN to work the IP address of the LDAP Server would have to be configured in the DNS Servers field of the client’s network preference pane. You can either do this manually or if configure the DHCP Server/Service to do this for you. If the DHCP Server/Service is already doing this then you might find the LDAP Server details are automatically configured in Directory Access. By default Directory Access looks for DHCP-supplied LDAP Servers.
    You may find downloading the Open Directory Admin Manual of benefit:
    http://images.apple.com/server/pdfs/OpenDirectoryv10.4.pdf
    Tony

  • Unable to establish AV call with Lync server 2013 from internal to external remote users

    Hi,
    Instant messaging is working fine
    When trying to video call from the internal Lan to an remote external user Video call connects for 10 seconds and then drops.
    This also happens between federated sites when we initiate the call
    Internal to internal video call works
    External to external video works
    Please see logs below, can anyone advise on this issue or point me in the direction
    The logs show trying to make a video call from user on the same domain, one user on the internal network and the other user is external
    08/08/2014|11:25:44.523 4024:4344 INFO  :: End of Sending Packet - 192.168.10.4:5061 (From Local Address: 192.168.11.77:62287) 1082 bytes
    08/08/2014|11:25:44.523 4024:4344 TRACE :: CSIPCompression::CompressSendBuffer after compression, BytesLeft = 1082, BytesProcessed = 1082, cbDataCompressed = 465, psCompressedData = 16A01FD8
    08/08/2014|11:25:44.523 4024:4344 TRACE :: - encrypted buffer length: 533 bytes.  First 8 bytes:
    08/08/2014|11:25:44.523 4024:4344 TRACE ::  17 03 03 02 10 D0 D8 3D  :.....ÐØ=
    08/08/2014|11:25:44.523 4024:4344 TRACE :: CSIPTransportLayerSecurity::Send after encryption, BytesLeft = 465, BytesProcessed = 465, cbEncryptedBufSize = 533, spEncryptedBuff = 0C2B13C8
    08/08/2014|11:25:44.523 4024:4344 TRACE :: CSIPAsyncSocket::Send this 07B3B000, sending pbSendBuf 0C2B13C8, dwSendBufSize = 533
    08/08/2014|11:25:44.523 4024:4344 TRACE :: CSIPAsyncSocket::SendHelper - [0x07B3B000]
    08/08/2014|11:25:44.523 4024:4344 TRACE :: CAsyncSocketWin32::Send this 0C47D5A0, pbSendBuf 0C2B13C8, dwSendBufSize = 533, dwBytesSent = 533
    08/08/2014|11:25:44.523 4024:4344 INFO  :: REGISTER_CONTEXT(c554a20) SetAndNotify Recv(2) at State (1)
    08/08/2014|11:25:44.523 4024:4344 INFO  :: REGISTER_CONTEXT:State (1) => (2)
    08/08/2014|11:25:44.523 4024:4344 INFO  :: UCCP:NegotiatedAuthProt0x8
    08/08/2014|11:25:44.523 4024:4344 INFO  :: Function: CUccPlatform::GetMetricsDataPoints
    08/08/2014|11:25:44.523 4024:4344 ERROR :: Failure condition: 'm_spMediaManage == NULL'
    08/08/2014|11:25:44.594 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x07B3B008]
    08/08/2014|11:25:44.594 4024:4344 TRACE :: SECURE_SOCKET: decrypting buffer size: 543 (first 8):
    08/08/2014|11:25:44.594 4024:4344 TRACE ::  17 03 03 00 E0 C4 48 8E  :....àÄHŽ
    08/08/2014|11:25:44.594 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C3DC610]
    08/08/2014|11:25:44.594 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C2B5E68]
    08/08/2014|11:25:44.594 4024:4344 INFO  :: Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 662 bytes:
    08/08/2014|11:25:44.594 4024:4344 INFO  :: SIP/2.0 200 OK
    Contact: <sip:PMDLONLYC01.int.*******.com:5061;transport=tls>
    Proxy-Authentication-Info: Kerberos qop="auth", opaque="DC934C0A", srand="CEA1D9C7", snum="34", rspauth="040401ffffffffff000000000000000008fa065605ec8ffed4978ee2", targetname="sip/PMDLONLYC01.int.*******.com",
    realm="SIP Communications Service", version=4
    From: "Administrator"<sip:*****@*******.com>;tag=e56751f845;epid=6969679f0b
    To: <sip:*****@*******.com>;tag=EB010080
    Call-ID: aa4c7843a0c14678a03acc30a615c81b
    CSeq: 2 SUBSCRIBE
    Via: SIP/2.0/TLS 192.168.11.77:62287;ms-received-port=62287;ms-received-cid=13CB00
    Expires: 0
    Content-Length: 0
    08/08/2014|11:25:44.594 4024:4344 INFO  :: End of Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 662 bytes
    08/08/2014|11:25:44.594 4024:4344 TRACE :: CSIPMessageCollator::AsyncProcessSipMsg - [0x0C4826E0]
    08/08/2014|11:25:44.594 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C4826E0]
    08/08/2014|11:25:44.594 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C484940]
    08/08/2014|11:25:44.594 4024:4344 TRACE :: SECURE_SOCKET: decrypting buffer size: 314 (first 8):
    08/08/2014|11:25:44.594 4024:4344 TRACE ::  17 03 03 00 B0 42 E2 01  :....°Bâ.
    08/08/2014|11:25:44.594 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C3DC610]
    08/08/2014|11:25:44.595 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C2B5E68]
    08/08/2014|11:25:44.595 4024:4344 INFO  :: Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 662 bytes:
    08/08/2014|11:25:44.595 4024:4344 INFO  :: SIP/2.0 200 OK
    Contact: <sip:PMDLONLYC01.int.*******.com:5061;transport=tls>
    Proxy-Authentication-Info: Kerberos qop="auth", opaque="DC934C0A", srand="A79E32E6", snum="35", rspauth="040401ffffffffff0000000000000000435392b30686e91dd20b3120", targetname="sip/PMDLONLYC01.int.*******.com",
    realm="SIP Communications Service", version=4
    From: "Administrator"<sip:*****@*******.com>;tag=457d67e5ba;epid=6969679f0b
    To: <sip:*****@*******.com>;tag=3D631C5A
    Call-ID: 7666f05a981c4eb28c8bd44d497382a2
    CSeq: 2 SUBSCRIBE
    Via: SIP/2.0/TLS 192.168.11.77:62287;ms-received-port=62287;ms-received-cid=13CB00
    Expires: 0
    Content-Length: 0
    08/08/2014|11:25:44.595 4024:4344 INFO  :: End of Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 662 bytes
    08/08/2014|11:25:44.595 4024:4344 TRACE :: CSIPMessageCollator::AsyncProcessSipMsg - [0x0C4826E0]
    08/08/2014|11:25:44.595 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C4826E0]
    08/08/2014|11:25:44.595 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C484940]
    08/08/2014|11:25:44.595 4024:4344 TRACE :: SECURE_SOCKET: decrypting buffer size: 133 (first 8):
    08/08/2014|11:25:44.595 4024:4344 TRACE ::  17 03 03 00 80 46 FC D6  :....€FüÖ
    08/08/2014|11:25:44.595 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C3DC610]
    08/08/2014|11:25:44.595 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C2B5E68]
    08/08/2014|11:25:44.595 4024:4344 INFO  :: Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 662 bytes:
    08/08/2014|11:25:44.595 4024:4344 INFO  :: SIP/2.0 200 OK
    Contact: <sip:PMDLONLYC01.int.*******.com:5061;transport=tls>
    Proxy-Authentication-Info: Kerberos qop="auth", opaque="DC934C0A", srand="8FB2392C", snum="36", rspauth="040401ffffffffff00000000000000005c89df75c789bd815f2c87c7", targetname="sip/PMDLONLYC01.int.*******.com",
    realm="SIP Communications Service", version=4
    From: "Administrator"<sip:*****@*******.com>;tag=b87f3eb341;epid=6969679f0b
    To: <sip:*****@*******.com>;tag=447B0080
    Call-ID: 78fff0c6673c4c209914ba91221e7a71
    CSeq: 3 SUBSCRIBE
    Via: SIP/2.0/TLS 192.168.11.77:62287;ms-received-port=62287;ms-received-cid=13CB00
    Expires: 0
    Content-Length: 0
    08/08/2014|11:25:44.595 4024:4344 INFO  :: End of Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 662 bytes
    08/08/2014|11:25:44.595 4024:4344 TRACE :: CSIPMessageCollator::AsyncProcessSipMsg - [0x0C4826E0]
    08/08/2014|11:25:44.595 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C4826E0]
    08/08/2014|11:25:44.595 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C484940]
    08/08/2014|11:25:44.596 4024:4344 INFO  :: CUccLogicalSubscription::~CUccLogicalSubscription [0C3DCE28] dtor
    08/08/2014|11:25:44.597 4024:4344 INFO  :: CUccLogicalSubscription::~CUccLogicalSubscription [0C3DCEC8] dtor
    08/08/2014|11:25:44.597 4024:4344 INFO  :: CUccLogicalSubscription::~CUccLogicalSubscription [0C3DCC48] dtor
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [sourcenetwork] has no context, this 0C47E850
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [services] has no context, this 0C47E850
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [state] has no context, this 0C47E850
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [note] has no context, this 0C47E850
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [calendarData] has no context, this 0C47E850
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [sourcenetwork] has no context, this 0C47E300
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [note] has no context, this 0C47E300
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [sourcenetwork] has no context, this 07B818F0
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [services] has no context, this 07B818F0
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [state] has no context, this 07B818F0
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [note] has no context, this 07B818F0
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [calendarData] has no context, this 07B818F0
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [sourcenetwork] has no context, this 0C47E740
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [services] has no context, this 0C47E740
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [state] has no context, this 0C47E740
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [note] has no context, this 0C47E740
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [calendarData] has no context, this 0C47E740
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [sourcenetwork] has no context, this 0C47E6B8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [services] has no context, this 0C47E6B8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [state] has no context, this 0C47E6B8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [note] has no context, this 0C47E6B8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [calendarData] has no context, this 0C47E6B8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [sourcenetwork] has no context, this 0C47EAF8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [services] has no context, this 0C47EAF8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [state] has no context, this 0C47EAF8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [note] has no context, this 0C47EAF8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [calendarData] has no context, this 0C47EAF8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [sourcenetwork] has no context, this 0C51B0C8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [services] has no context, this 0C51B0C8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [state] has no context, this 0C51B0C8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [contactCard] has no context, this 0C51B0C8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [note] has no context, this 0C51B0C8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [calendarData] has no context, this 0C51B0C8
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [sourcenetwork] has no context, this 0C47E960
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [services] has no context, this 0C47E960
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [state] has no context, this 0C47E960
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [note] has no context, this 0C47E960
    08/08/2014|11:25:44.597 4024:4344 WARN  :: CUccCategoryManager::RemoveCategory category [calendarData] has no context, this 0C47E960
    08/08/2014|11:25:44.597 4024:4344 INFO  :: CUccLogicalSubscription::~CUccLogicalSubscription [0C3DCCE8] dtor
    08/08/2014|11:25:44.597 4024:4344 INFO  :: ~Out trxn corr-id (18680A38)
    08/08/2014|11:25:44.601 4024:4344 TRACE :: verified buffer: <Kerberos><CEA1D9C7><34><SIP Communications Service><sip/PMDLONLYC01.int.*******.com><aa4c7843a0c14678a03acc30a615c81b><2><SUBSCRIBE><sip:*****@*******.com><e56751f845><sip:*****@*******.com><EB010080><><><0><200>-length-238.
    signature:040401ffffffffff000000000000000008fa065605ec8ffed4978ee2
    08/08/2014|11:25:44.601 4024:4344 INFO  :: Trxn corr-id (184AD1C8), SIP msg corr-id (b7eb295)
    08/08/2014|11:25:44.601 4024:4344 INFO  :: ~Out trxn corr-id (184AD1C8)
    08/08/2014|11:25:44.601 4024:4344 TRACE :: verified buffer: <Kerberos><A79E32E6><35><SIP Communications Service><sip/PMDLONLYC01.int.*******.com><7666f05a981c4eb28c8bd44d497382a2><2><SUBSCRIBE><sip:*****@*******.com><457d67e5ba><sip:*****@*******.com><3D631C5A><><><0><200>-length-238.
    signature:040401ffffffffff0000000000000000435392b30686e91dd20b3120
    08/08/2014|11:25:44.601 4024:4344 INFO  :: Trxn corr-id (184AD2E0), SIP msg corr-id (e46ab49b)
    08/08/2014|11:25:44.601 4024:4344 INFO  :: ~Out trxn corr-id (184AD2E0)
    08/08/2014|11:25:44.601 4024:4344 TRACE :: verified buffer: <Kerberos><8FB2392C><36><SIP Communications Service><sip/PMDLONLYC01.int.*******.com><78fff0c6673c4c209914ba91221e7a71><3><SUBSCRIBE><sip:*****@*******.com><b87f3eb341><sip:*****@*******.com><447B0080><><><0><200>-length-238.
    signature:040401ffffffffff00000000000000005c89df75c789bd815f2c87c7
    08/08/2014|11:25:44.601 4024:4344 INFO  :: Trxn corr-id (186E42C8), SIP msg corr-id (b03cc2c3)
    08/08/2014|11:25:44.601 4024:4344 INFO  :: ~Out trxn corr-id (186E42C8)
    08/08/2014|11:25:44.757 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x07B3B008]
    08/08/2014|11:25:44.757 4024:4344 TRACE :: SECURE_SOCKET: decrypting buffer size: 373 (first 8):
    08/08/2014|11:25:44.757 4024:4344 TRACE ::  17 03 03 01 70 6D 6F B0  :....pmo°
    08/08/2014|11:25:44.757 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C3DC610]
    08/08/2014|11:25:44.757 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C2B5E68]
    08/08/2014|11:25:44.757 4024:4344 INFO  :: Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 959 bytes:
    08/08/2014|11:25:44.757 4024:4344 INFO  :: SIP/2.0 200 OK
    Proxy-Authentication-Info: Kerberos qop="auth", opaque="DC934C0A", srand="FBA1D2E0", snum="37", rspauth="040401ffffffffff00000000000000009dbeae96bc6990dd02bfb9bd", targetname="sip/PMDLONLYC01.int.*******.com",
    realm="SIP Communications Service", version=4
    From: "Administrator"<sip:*****@*******.com>;tag=50091c6b22;epid=6969679f0b
    To: <sip:*****@*******.com>;tag=AC6EA9B1891BDC84CB8DED81E89D55FF
    Call-ID: 6f1ec22d6c96481093ebcdd126f5b255
    CSeq: 3 REGISTER
    Via: SIP/2.0/TLS 192.168.11.77:62287;ms-received-port=62287;ms-received-cid=13CB00
    Expires: 0
    Allow-Events: vnd-microsoft-provisioning,vnd-microsoft-roaming-contacts,vnd-microsoft-roaming-ACL,presence,presence.wpending,vnd-microsoft-roaming-self,vnd-microsoft-provisioning-v2
    Supported: adhoclist
    Server: RTC/5.0
    Supported: msrtc-event-categories
    Supported: ms-keepalive-deregister
    Supported: ms-userservices-state-notification
    Content-Length: 0
    08/08/2014|11:25:44.757 4024:4344 INFO  :: End of Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 959 bytes
    08/08/2014|11:25:44.757 4024:4344 TRACE :: CSIPMessageCollator::AsyncProcessSipMsg - [0x0C4826E0]
    08/08/2014|11:25:44.757 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C4826E0]
    08/08/2014|11:25:44.757 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C484940]
    08/08/2014|11:25:44.758 4024:4344 TRACE :: verified buffer: <Kerberos><FBA1D2E0><37><SIP Communications Service><sip/PMDLONLYC01.int.*******.com><6f1ec22d6c96481093ebcdd126f5b255><3><REGISTER><sip:*****@*******.com><50091c6b22><sip:*****@*******.com><AC6EA9B1891BDC84CB8DED81E89D55FF><><><0><200>-length-261.
    signature:040401ffffffffff00000000000000009dbeae96bc6990dd02bfb9bd
    08/08/2014|11:25:44.758 4024:4344 INFO  :: Trxn corr-id (0C2E3618), SIP msg corr-id (67f10dc5)
    08/08/2014|11:25:44.758 4024:4344 INFO  :: REGISTER_CONTEXT(c554a20) SetAndNotify Recv(3) at State (2)
    08/08/2014|11:25:44.758 4024:4344 INFO  :: REGISTER_CONTEXT:State (2) => (3)
    08/08/2014|11:25:44.758 4024:4344 INFO  :: SIP_REGISTER:State (3) => (0)
    08/08/2014|11:25:44.758 4024:4344 INFO  :: UCCP:NegotiatedAuthProt0x8
    08/08/2014|11:25:44.758 4024:4344 TRACE :: CUccServerEndpoint::UpdateEndpointState - Update state from 3 to 4. Status 0. Status text (null).
    08/08/2014|11:25:44.758 4024:4344 INFO  :: CUccDnsResolverManager::Stop MR-INFO - [05026010] DNS resolver manager stopped
    08/08/2014|11:25:44.758 4024:4344 TRACE :: OUTGOING_REGISTER_TRANSACTION::ProcessSuccessfulResponse received 200 UnRegistration SUCCEEDED
    08/08/2014|11:25:44.758 4024:4344 INFO  :: ~Out trxn corr-id (0C2E3618)
    08/08/2014|11:25:44.758 4024:4344 INFO  :: CUccPlatform::WriteStreamToLog:
    08/08/2014|11:25:44.758 4024:4344 INFO  :: <?xml version="1.0" encoding="UTF-8"?>
    <root>
      <Login>
        <Info><![CDATA[Executing wws method with windows auth auth, asyncContext=16C3E478,
     context: WebRequest context@ :415272512
      MethodType:10
      ExecutionComplete? :1
      Callback@ :07AB55A4
      AsyncHResult:3d0000
      TargetUri:https://owa.lon.*******.com/EWS/Exchange.asmx
    .]]></Info>
        <Info><![CDATA[Logon success state 1 reported by user id=EWS (adjusted=EWS) on CManagedCredential[DEFAULT this=01B6C988]]]></Info>
        <ExecuteWithWindowsOrNoAuthInternal>
          <SequenceID>1.1.1</SequenceID>
          <hr>0x0</hr>
        </ExecuteWithWindowsOrNoAuthInternal>
        <SequenceID>1.1</SequenceID>
        <hr>0x0</hr>
      </Login>
    </root>
    08/08/2014|11:25:44.974 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x07B3B008]
    08/08/2014|11:25:44.974 4024:4344 TRACE :: SECURE_SOCKET: decrypting buffer size: 1125 (first 8):
    08/08/2014|11:25:44.974 4024:4344 TRACE ::  17 03 03 04 60 1A 0C FC  :....`..ü
    08/08/2014|11:25:44.974 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C3DC610]
    08/08/2014|11:25:44.974 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C2B5E68]
    08/08/2014|11:25:44.974 4024:4344 INFO  :: Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 1891 bytes:
    08/08/2014|11:25:44.974 4024:4344 INFO  :: SIP/2.0 200 OK
    Proxy-Authentication-Info: Kerberos qop="auth", opaque="DC934C0A", srand="4C70707C", snum="38", rspauth="040401ffffffffff000000000000000023304d3690145c9d580a26a5", targetname="sip/PMDLONLYC01.int.*******.com",
    realm="SIP Communications Service", version=4
    Contact: <sip:LyncSG.dymonasia.com:5061;transport=tls>
    From: <sip:*****@*******.com>;tag=4c49873a8c;epid=6969679f0b
    To: <sip:[email protected]>;tag=925E0080
    Call-ID: 612b2be69bbe45479e2676a9c89605a3
    CSeq: 2 SUBSCRIBE
    Via: SIP/2.0/TLS 192.168.11.77:62287;ms-received-port=62287;ms-received-cid=13CB00
    Record-Route: <sip:sip.dymonasia.com:5061;transport=tls;lr;ms-key-info=AAEAAQy-Hptx2bBz4bLPASfi0Q8AhsIHwfOZFhikS5I3lhvpZ6FVtoDW4nKeyfA65H-h1EPauf6Bo4PDT0Nc93YHKHPl5ZBwmxjvyetg5BZQ7yraK2EZvGpZ_bkQJlXyIw3lVlxFe-h2PmfG6lfKBZ8To-piAjW4LQLcr3Z7cic1p_GtAFi1lXOOdlcXxfUKQ_vqQjvpuZIrI7xCmomXlvM9o7Ue8lXbq3TndzkR-ghwnju0QJjj5GrUJ3Ia82bfodQYntaJaJG2bf5oUMAVJkX5_84vNcFhZRTRilUI-lC1wyChOjjWVV56ndqCVY7oiitF5HHDpfVg58-SSzRiHKhFZJKvyZtcorcM5WHuJwYNw7sdxzc2vB6hqN4vTdRjlpb1jhG35BsQ2usDMPfc8EZYGY-S5SW6C_NUgrh3Fb-_f0qcnXV92JDu55rbTy-Apz4GJk8Ivrt-PNr99CbhUoyRg_8301OIivRJAExy_xMjyIJBWkoJp7IVQjvhLL_bQWAFQn0HhJTpf13NpT-if54k7l5KbgL6K0vkcMnc8WVkgm5a_c2Dewp_RG-7jIbr5xxZXuJAxK9indqeCXnfjbIk6mhEAZI7SJmlK9_SJt0H94HutoIVwHYLarDclsdKrR7Xb-5nDPkFE4U4LjWRLf-7ff7MJJbzhbaXTE6o_t4nFFQ8kWxiRWBN2kMLChKY;ms-route-sig=bdBGMrXXhjLMmcJ4Ej8ReFZ_nqkUoCWKhFB19tji2ro5-_BAzrBqDJlQAA>
    Record-Route: <sip:pmdlonedg01.int.*******.com:5061;transport=tls;lr>
    Expires: 0
    Content-Length: 0
    ms-edge-proxy-message-trust: ms-source-type=DirectPartner;ms-ep-fqdn=pmdlonedg01.int.*******.com;ms-source-verified-user=verified;ms-source-network=federation
    Record-Route: <sip:PMDLONLYC01.int.*******.com:5061;transport=tls;opaque=state:F:Ci.R13cb00;lr;ms-route-sig=bc4_1nrdDL4-KX7KrdReLOthlr4n7DTIcsDrkM0bP4gGNYk0BjUtG1CwAA>
    08/08/2014|11:25:44.974 4024:4344 INFO  :: End of Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 1891 bytes
    08/08/2014|11:25:44.974 4024:4344 TRACE :: CSIPMessageCollator::AsyncProcessSipMsg - [0x0C4826E0]
    08/08/2014|11:25:44.974 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C4826E0]
    08/08/2014|11:25:44.974 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C484940]
    08/08/2014|11:25:44.974 4024:4344 TRACE :: verified buffer: <Kerberos><4C70707C><38><SIP Communications Service><sip/PMDLONLYC01.int.*******.com><612b2be69bbe45479e2676a9c89605a3><2><SUBSCRIBE><sip:*****@*******.com><4c49873a8c><sip:[email protected]><925E0080><><><0><200>-length-233.
    signature:040401ffffffffff000000000000000023304d3690145c9d580a26a5
    08/08/2014|11:25:44.974 4024:4344 INFO  :: Trxn corr-id (184AD3F8), SIP msg corr-id (e3f780cb)
    08/08/2014|11:25:44.974 4024:4344 INFO  :: ~Out trxn corr-id (184AD3F8)
    08/08/2014|11:25:45.288 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x07B3B008]
    08/08/2014|11:25:45.288 4024:4344 TRACE :: SECURE_SOCKET: decrypting buffer size: 277 (first 8):
    08/08/2014|11:25:45.288 4024:4344 TRACE ::  17 03 03 01 10 3B 87 16  :.....;‡.
    08/08/2014|11:25:45.288 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C3DC610]
    08/08/2014|11:25:45.288 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C2B5E68]
    08/08/2014|11:25:45.288 4024:4344 INFO  :: Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 1888 bytes:
    08/08/2014|11:25:45.288 4024:4344 INFO  :: SIP/2.0 200 OK
    Proxy-Authentication-Info: Kerberos qop="auth", opaque="DC934C0A", srand="59667E0A", snum="39", rspauth="040401ffffffffff00000000000000002641ec9a3a4c088b301bcf5e", targetname="sip/PMDLONLYC01.int.*******.com",
    realm="SIP Communications Service", version=4
    Contact: <sip:LyncSG.dymonasia.com:5061;transport=tls>
    From: <sip:*****@*******.com>;tag=04814352f9;epid=6969679f0b
    To: <sip:[email protected]>;tag=3F0E0080
    Call-ID: 8115c934d1fd446eb7d034c4fc773ec0
    CSeq: 2 SUBSCRIBE
    Via: SIP/2.0/TLS 192.168.11.77:62287;ms-received-port=62287;ms-received-cid=13CB00
    Record-Route: <sip:sip.dymonasia.com:5061;transport=tls;lr;ms-key-info=AAEAAQy-Hptx2bBz4bLPASfi0Q8AhsIHwfOZFhikS5I3lhvpZ6FVtoDW4nKeyfA65H-h1EPauf6Bo4PDT0Nc93YHKHPl5ZBwmxjvyetg5BZQ7yraK2EZvGpZ_bkQJlXyIw3lVlxFe-h2PmfG6lfKBZ8To-piAjW4LQLcr3Z7cic1p_GtAFi1lXOOdlcXxfUKQ_vqQjvpuZIrI7xCmomXlvM9o7Ue8lXbq3TndzkR-ghwnju0QJjj5GrUJ3Ia82bfodQYntaJaJG2bf5oUMAVJkX5_84vNcFhZRTRilUI-lC1wyChOjjWVV56ndqCVY7oiitF5HHDpfVg58-SSzRiHKhFZJKvyZtcorcM5WHuJwYNw7sdxzc2vB6hqN4vTdRjlpb1jhG35BsQ2usDMPfc8EZYGY-S5SW6C_NUgrh3Fb-_f0qcnXV92JDu55rbTy-Apz4GJk8Ivrt-PNr99CbhUoyRg_8301OIivRJAExy_xMjyIJBWkoJp7IVQjvhLL_bQWAFQn0HhJTpf13NpT-if54k7l5KbgL6K0vkcMnc8WVkgm5a_c2Dewp_RG-7jIbr5xxZXuJAxK9indqeCXnfjbIk6mhEAZI7SJmlK9_SJt0H94HutoIVwHYLarDclsdKrR7Xb-5nDPkFE4U4LjWRLf-7ff7MJJbzhbaXTE6o_t4nFFQ8kWxiRWBN2kMLChKY;ms-route-sig=bd5A_eMqoaHs_fuYP-5aSBoYbANCe_p5RWv6n6yajgyfxebrRuBqDJlQAA>
    Record-Route: <sip:pmdlonedg01.int.*******.com:5061;transport=tls;lr>
    Expires: 0
    Content-Length: 0
    ms-edge-proxy-message-trust: ms-source-type=DirectPartner;ms-ep-fqdn=pmdlonedg01.int.*******.com;ms-source-verified-user=verified;ms-source-network=federation
    Record-Route: <sip:PMDLONLYC01.int.*******.com:5061;transport=tls;opaque=state:F:Ci.R13cb00;lr;ms-route-sig=bcFuhIALmH85OaoJh25uPG5Y8-bgabM97QpJ5ypCK7x_cYXXQWUtG1CwAA>
    08/08/2014|11:25:45.288 4024:4344 INFO  :: End of Data Received -192.168.10.4:5061 (To Local Address: 192.168.11.77:62287) 1888 bytes
    08/08/2014|11:25:45.288 4024:4344 TRACE :: CSIPMessageCollator::AsyncProcessSipMsg - [0x0C4826E0]
    08/08/2014|11:25:45.288 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C4826E0]
    08/08/2014|11:25:45.288 4024:4344 TRACE :: CSIPTransportLayerNotify::OnRecv - [0x0C484940]
    08/08/2014|11:25:45.288 4024:4344 TRACE :: verified buffer: <Kerberos><59667E0A><39><SIP Communications Service><sip/PMDLONLYC01.int.*******.com><8115c934d1fd446eb7d034c4fc773ec0><2><SUBSCRIBE><sip:*****@*******.com><04814352f9><sip:[email protected]><3F0E0080><><><0><200>-length-230.
    signature:040401ffffffffff00000000000000002641ec9a3a4c088b301bcf5e
    08/08/2014|11:25:45.289 4024:4344 INFO  :: Trxn corr-id (184AD510), SIP msg corr-id (42a27507)
    08/08/2014|11:25:45.289 4024:4344 INFO  :: ~Out trxn corr-id (184AD510)
    08/08/2014|11:25:49.397 4024:4344 TRACE :: MULTIPARTY_SESSION::RemoveFromLinkedList[17060C50] removed from linked list

    As with the original issue, your problem is likely with the Edge server. The first thing I would do is check all of your ports and DNS settings.
    Remember that Edge may use somewhat unique ports for AV if you, or the federation target, used a single IP address. If you haven't, see if you have that unique port open on the firewall. If you used a single IP address, ensure that the federation target
    has the correct port open also.

  • RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

    Hi, All
    the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
    detail from SM21
    The system could not send the data that has been collected automatical
    for the System Landscape Directory (SLD). Check whether the gateway
    configured in transaction RZ70 has been started and whether the SLD
    bridge has been registered with this gateway.
    You can use transaction SM59 to check this in the sending system for t
    implemented RFC destinations. The RFC destinations have the standard
    names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
    sending systems. If a different RFC destination has been entered in
    RZ70, check this destination instead.
    You can use the Gateway Monitor to check the target gateways. In ABAP
    systems, this monitor is started with transaction SMGW, or you can use
    the external SAP program "gwmon". Check whether the specified gateway
    has an active registration.
    OF COURSE I checked  RFC of  SLD_UC and SMGW
    any different ideas
    Regards
    ABH

    Hi
    Please check the following notes are implemented
    Note 906454                           
    Note 907729
    You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission    
    Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
    Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
    Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
    It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
    after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
    Best wishes
    Stuart

  • Function modules calling Application server

    I am working on a SAP Migration for windows to unix. Right now I am patching up all custom programs which call the Application server using physical filenames and paths (platform specific) and replacing them with logical paths and names (platform independent). I need help from you guys to identify more function modules which uses file names that are platform specific. I have taken care of open dataset and FTP commands. Any help pointing out function modules is highly appreciated. Points will be rewarded. Thanks in advance.
    Rohit

    Hi ,
    Check the following function groups for file related operations.
    GRAP - Frontend related.
    SVRZ -  System related.
    SFTP   - FTP related.
    SFIL  - Logical file name related.
    As per my understanding, we are not using any function modules to read data from application server.
    Best of luck.
    Thanks
    Viswa
    (Assign points for helpful answers)

  • I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my we

    I still have problems with getting my website online. I have defined my server. Then I did the test and there was a connection via FTP. I put my files on the external server and there is a connection with the external server. But when I check to see my website online (with Firefox, Explorer, Chrome browser) I always get the message 'Forbidden, You don't have permission to access / on this server.' Can somebody help me please? I have to get my website online..Thank you!

    Hello Els,
    it's well known, that in all these cases you describe I'm not a friend of a detailed Troubleshooting (I see Nancy#s smile already).
    To be able to be independent in all this things It is one of the reasons why I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
    To manage several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
    Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
    And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
    http://filezilla-project.org/ and http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
    Mac: Mac OS X (Use: Show additional download options)
    http://filezilla-project.org/download.php
    Of course, you also need all the access data to reach your server and for MIME issues, you should contact your web host/provider.
    Good luck!
    Hans-Günter
    P.S.
    Since I use two screens, the whole thing became even more comfortable.

  • Calling an external C function from a C file in JNI

    Hello,
    I am trying to call an external C function, from a C file which is being called by a Java file. I am getting an unresolved symbol error. I have tried many things like, making the external C function in the format of JNI, etc, etc. It is still not working. I think it has something to do with linking the two C files. If anyone can please answer this, it would greatly help me. here is the code:
    HelloWorld.c:
    #include <jni.h>
    #include <stdio.h>
    #include "MyOldHello.h"
    #include "HelloWorld.h"
    JNIEXPORT void JNICALL
    Java_HelloWorld_print(JNIEnv *env, jobject obj)
         helloPrint();
         return;
    HelloWorld.java:
    class HelloWorld
         private native void print();
         public static void main(String[] args)
              new HelloWorld().print();
         static
              System.loadLibrary("HelloWorld");
              System.loadLibrary("MyOldHello");
    MyOldHello.c:
    #include <jni.h>
    #include <stdio.h>
    #include "MyOldHello.h"
    void helloPrint()
         printf("\nHello World!\n");
    MyOldHello.h:
    void helloPrint();
    Now i use the Visual C++ command prompt to compile this by saying:
    javac HelloWorld.java
    javah -jni HelloWorld
    cl -Ic:\Java\jdk1.6.0_20\include -Ic:\Java\jdk1.6.0_20\include\win32 -MD -LD HelloWorld.c -FeHelloWorld.dll
    and now it gives me the error saying that there is an unresolved external symbol, which is the call to helloPrint in the file HelloWorld.
    If anyone knows how to solve this, or how to call external C functions from a C file that is being called from a Java file using JNI, please respond.
    Thanks
    Nick

    Hi,
    In your post on velocity review, you did not compile MyOldHello.c. You compiled a C file that included the header file for it and called a method defined in the header. The linker is never going to be able to find the code for this if you do not include the object file for this.
    Try this. You will also have to add in any JNI libraries you need to link against but I am sure you could work that out.
    cl /c MyOldHello.c
    cl /c -Ic:\Java\jdk1.6.0_20\include -Ic:\Java\jdk1.6.0_20\include\win32 -MD HelloWorld.c
    cl /LD MyOldHello.obj HelloWorld.obj /FeHelloWorld.dll
    [http://msdn.microsoft.com/en-us/library/f35ctcxw(VS.80).aspx]
    Cheers,
    Shane

  • How can call a function module(RFC)in one server to another sever in my rep

    How can call a function module(RFC)in one server to another sever in my report program.
    What i am know whenever rfc enabled immediately radio button checks then only it will come.
    please justify.

    Syntax
    CALL FUNCTION func DESTINATION dest [EXPORTING p1 = a1 p2 = a2 ...]
    [IMPORTING p1 = a1 p2 = a2 ...]
    [CHANGING p1 = a1 p2 = a2 ...]
    [TABLES t1 = itab1 t2 = itab2 ...]
    [EXCEPTIONS [exc1 = n1 exc2 = n2 ...]
    [system_failure = ns [MESSAGE smess]]
    [communication_failure = nc [MESSAGE cmess]]
    [OTHERS = n_others]].
    http://help.sap.com/saphelp_47x200/helpdata/en/22/042537488911d189490000e829fbbd/frameset.htm

  • Calling a sql server sproc and function from oracle gateway

    Hello ,
    i am new to oracle gateway,
    we are trying to call a sql server 2008 stored procedure and function which return result set like a table result set.
    Can you please share some syntax of how to do it.
    and capture the data set and loop through or output it.
    Thanks
    madhu

    On My Oracle Support you find some notes how to do that. The first one is
    Different Methods For Calling MS SQL Server Procedures Using DG4MSQL (Doc ID 197192.1)
    and a note using result sets (it was written fir the Sybase gateway but works the same way for DG4MSQL) is:
    How to Call a Remote Sybase Procedure Using DG4SYBS (Doc ID 351400.1)
    - Klaus

  • Hosting a server for simple game related info, rankings, high scores, etc.

    I have a quick question about servers. I want to implement a ranking system for one of my games, the server would store player high scores and world rankings based on their score and perhaps other fairly easy stuff. Writing the server and communicating from
    it with the app is the easy part in my mind, ive done it numerious times for personal projects (Like a Raspberry PI based quadrocopter i wrote). My question is this. If i wrote the server where do i host it? How do people typically host their servers that
    are simple like this? Do they get a static ip address and host it from a extra computer in there homes? Im not talking about big corporations like microsoft that have large server centers, just individual developers like me.  Any thoughts?
    thank you for your time.

    Yes, the server  app runs on the machine it is hosted on.
    See http://azure.microsoft.com/en-us/documentation/services/mobile-services/ to get started with Azure Mobile Services.
    If you want to write a web service yourself from scratch you'll need to pick your technology and look for documentation there. It's off topic in this forum, but check out http://www.asp.net/get-started and the http://forums.asp.net/ forums for asp.net.
    --Rob

  • How to Call ScheduleBatch.cmd from External Server

    I am attempting to kick off a set of Hyperion Reports after data is loaded to the Essbase. Currently, our data warehouse is loaded and then triggers a bat file which loads Essbase using a MAXL script. I want to add the automatic sending of Hyperion Financial Reports to the end of this process using ScheduleBatch.cmd. I can do this from the reports server but the Bat/Maxl exist on a separate server. Is there a way to call ScheduleBatch.cmd from an external server? If not, is there another way to accomplish this?
    Thanks for your help.
    Heather

    I do something similar, in my environment although I use esscmd.
    I first exported the Batch for command line scheduling, which generates an XML file. In my case, I stored the XML in c:\bin\financial_reporting\batch_reports\exported_batch.xml
    I then created a bat file that executes the batch (Contents of batch file in italics)
    REM START_BATCH_FILE
    d:
    cd D:\Hyperion\products\biplus\bin
    D:\Hyperion\products\biplus\bin\ScheduleBatch C:\bin\financial_reporting\batch_reports\exported_batch.xml <<REPORT_SERVER_HOST_NAME>>
    REM END_BATCH_FILE
    I created a Scheduled Task on the Reports Server that runs this task, but the task is not enabled.
    At the end of my dataload, I initiate a call to the Reporting Server to run the task (Batch file that does dataload and runs the task in italics).
    REM DATALOAD.CMD
    ESSCMD F:\DataLoads\Scripts\SCR\Load_and_AGG.ESSSCRIPT
    C:\WINDOWS\system32\schtasks.exe /run /tn Run_Scheduled_Batch /s <<REPORTING_SERVER>> /u <<DOMAIN>>\<<DOMAIN_USER>> /p <<USER_PASSWORD>>
    REM END_DATALOAD.CMD
    I don't know if I did anything else to make this work (did this a while ago).
    Hope this helps.
    Thanks
    Dan

  • Saving via Reader-Enabled plugins - An unimplemented or obsolete function was called

    Hello,
    I have recently Reader-Enabled my plugin, and am getting an issue using PDDocSave; getting "An unimplemented or obsolete function was called".
    Testing in X and XI has the same response.
    Reading Re: Acrobat Reader X and PDDocSave it seems that it is a bug in X, but I would have assumed something like this would be fixed by XI.
    The below code has it saving the file where it is, but I am also calling the function with the PDSaveCopy flag to a different location and get the same result.
    AVDoc avDoc = AVAppGetActiveDoc();
    PDDoc pdDoc = AVDocGetPDDoc(avDoc);
    ASFile asFile = PDDocGetFile(pdDoc);
    ASFileSys asFileSys = ASFileGetFileSys(asFile);
    ASPathName asPath = ASFileAcquirePathName(asFile);
    PDDocSave(pdDoc, PDSaveFull | PDSaveLinearized | PDSaveCollectGarbage, asPath, asFileSys, NULL, NULL);
    I thought perhaps the save flags may have been the issue, but eliminating one-by-one had no change.
    I don’t have the /READER_PLUGIN conditional on, if I do I cannot compile at all - Re: How can I save current document in my Reader plugin? 
    Thanks for your help. Thought I'd ask here before putting in a support request.

    One thing I notice in the docs for PDDocSave:
    IMPLEMENTATION LIMIT: the current implementation can
    only save a file to the same fileSys for the doc's current backing
    file, thus fileSys MUST BE NULL, otherwise the error XXX is raised.
    This is also reiterated in the other headers:
    @param fileSys The file system. If it is NULL, uses the fileSys
    of the document's current backing file. Files can only be
    saved to the same file system. fileSys must be either NULL
    or the default file system obtained with ASGetDefaultFileSys(),
    otherwise an error is raised.

  • High Score Table: Writing a Simple Text File with Flash and PHP

    I am having a problem getting Flash to work with PHP as I need Flash to read and write to a text file on a server to store simple name/score data for a games hi score table. I can read from the text file into Flash easily enough but also need to write to the file when a new high score is reached, so I need to use PHP to do that. I can send the data from flash to the php file via POST but so far it is not working. The PHP file is confirmed as working as I added an echo to the file which displayed a message so I  could check that the server was running PHP - the files were also uploaded to a remote server so I  could test them properly. Flash code is as follows:
    //php filewriter
    var myLV = new LoadVars();
    function sendData() {
    //sets up variable 'hsdata' to send to php
    myLV.hsdata = myText;
    myLV.send("hiscores.php");
    I believe this sends the variable 'myText' to the php file as a variable called 'hsdata' which I want the php file to write into a text file. The mytext variable is just a long string that has all the scores and names in the hiscore. OK, XML would be better way of doing this but for speed I just want to get basic functionality working, so storing a simple text sting is adequate for now. The PHP code that reads the Flash 'hsdata' variable and writes it to the text file 'scores.txt' follows:
    <?php
    //assigns to variable the data POSTed from flash
    $flashdata = $_POST["hsdata"];
    //file handler opens file and erases all contents with w arg
    $fh = fopen("scores.txt","w");
    //adds data to file
    fwrite ($fh,$flashdata);
    //closes file
    fclose ($fh);
    echo 'php file is working';
    ?>
    Any help with this would be greatly appreciated - once I can get php to write simple text files I should be ok. Thanks.

    Thanks for your help.
    I have got Flash working to a certain extent with PHP using loadVars but have been unable to get flash to receive a variable declared in PHP. Here's my Flash code:
    var outLV = new LoadVars();
    var inLV = new LoadVars();
    function sendData() {
    outLV.hsdata = "Hello from Flash";
    outLV.sendAndLoad("http://www.mysite.com/hiscores/test23.php",inLV,"post");
    inLV.onLoad = function(success) {
    if (success) {
      //sets dynamic text box to show variable sent from php
      statusTxt.text = phpmess;
    } else {
      statusTxt.text = "No Data Received";
    This works ok and the inLV.onLoad function reports that it is receiving data but does not display the variable received from PHP. The PHP file is like this:
    <?php
    $mytxt =$_POST['hsdata'];
    $myfile = "test23.txt";
    $fh = fopen($myfile,'w');
    //adds data to file
    fwrite($fh, $mytxt);
    //closes file
    fclose ($fh);
    $mess = "hello there from php";
    echo ("&phpmess=$mess&");
    ?>
    The PHP file is correctly receiving the hsdata from flash and writing it to a text file, but there seems to be a problem with the final part of the code which is intended to send a variable called 'phpmess' back to Flash, this is the string "hello there from php". How do I set up Flash and PHP so that PHP can send a variable back to Flash using echo? Really have tried everything but am totally baffled. Online tutorials have given numerous different syntax configurations for how the PHP file should be written which has really confused me - any help would be greatly appreciated.

Maybe you are looking for

  • Serial Number Profiles based on sales order movement types.

    Hi, I am trying to config. serial number profiles based on specific movement types in sales order. So as usual,i have created Serial number profile with Serial Procedures including MMSL. I have assigned this procedure MMSL to Movement type group crea

  • Radeon display driver stopped working

    Hi I am running Win 8.1 x64 (up-to-date) on HP Pavillion 1322TX laptop. There are  Intel HD Graphics 3000 and ATM Radeon HD 7450M two graphic cards as the device manager window. Recently I am getting blue screens and later message appear saying the A

  • Pse 12 organizer crashing after opening

    pse 12 organizer crashing after opening,HELP

  • IPhoto crashes on Lion

    I am having trouble getting iPhoto to start on Lion. To give you a little info about why I'm having this problem, first our iMac purchased in 2011 experieced a 'sibling link error' out of nowhere. Took it into Apple and was told to re-install the OS

  • Difference bet ween Fleet Object and Production Resource Tools

    Hi all, Please give me the difference between Fleet Object and Production Resource Tools in Plant Maintenance Thanks in Advance Thanks, shriraam