HIghest quality DVD viewing experience?

Can I get a higher quality viewing experience on a dvd if I convert my 47 minute movie using compressor or will it be the same as a quick time conversion?
Also, what is the best dvd to use - R, + R or other.
Thanks in advance.

ABSOLUTELY better in compressor. And really it's a snap to use.
Export quicktime movie, self contained, do NOT recompress all frames.
Open compressor, drag file into thew window, select best 90 minute encode, push button. Two files will be created. Take them into dvdsp and author.
If you find it could be better, there are some things you can do to fix it up. Try playing with the bitrate in compressor, you can increase it some to help with difficult spots. Add compression markers in the timeline on "busy" sections.
How typical that the one on one with a genius gave you less than stellar results.

Similar Messages

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
Does it play in your Mac?
What brand of disks are you using?
Russ

How do I create the highest quality dvd of an iphoto slideshow?

I have created a large (550 photos) slideshow in iphoto using one of the iphoto templates and added music to the slideshow. The photos are high quality/large file size photos. I would like to then combine the iphoto slideshow with an imovie trailer. When I have gone through through the process of exporting the slideshow out of iphoto and into imovie and then burning a disk with idvd, the quality of the dvd is poor. I am using the latest versions of iphoto, imovie, and idvd. I would appreciate any advice on how to produce the highest quality dvd from the slideshow as it is part of a gift recapping a trip.

Here's one approach: First crop the photos to the iDVD size ratio, 4:3. Export the movie out of iPhoto via the Export button and select Size = Medium or Large. Remember DVD video format is standard definition only. All media gets reduced to 640 x 480 before burning to disk.
Don't add it to iMovie as that just adds another layer of compresson/encoding to it.
In iMovie create the trailer and use the Share ➙ Media Browser option. This produces a better file image than the Share ➙ iDVD option.
In iDVD create a Slideshow and add the trailer from the Media/Movies pane and drag the iPhoto movie after it.
Set transitions to None and slide duration to anything but Manual. Do not add any audio.
Follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If you find that the resulting movie/slideshow extends off the TV screen and looses some of the image you can set the iDVD/Slideshow preferences to Scale Photos to TV Safe Area.
That may add black areas to each side of the movie depending on the size ratio of the TV screen and aspect ratio set in the DVD player.
NOTE: if you have access to a copy of iMovie 6 HD I suggest you use it for your slideshow from photos and the trailer. It produces the best results with iDVD and allows far better audio control. If you do have that version just drag the completed iMovie project file into iDVD to avoid another layer of encoding/compression.
OT

Quickly create 8 minute highest quality DVD with no menus from Motion 4?

What's the fastest/simplest way to create a high quality DVD without any menus that just plays from Motion 4?
I set quality to best.
I just tried using Share, and I can see one of my processors working at 100%, but I've got no indication of any progress - or even that it is working, except I can see a few files in the directory I told it to create them in.
I told it to create a DVD (there was a checkbox), so I put a DVD in the drive.
I have no idea how long I should wait until giving up? I'd generally avoided trying to send anything to Compressor from motion, as it would take 10x longer.

Heya Les,
For the quickest method at the highest quality I would export a self-contained movie from Motion and take the self-contained QT movie and bring it into Compressor. Because SD DVD is compressed to MPEG-2 video format you will want to have control over how the file is compressed at the target bitrate of compression in order to achieve the best quality. You would want to duplicate and edit one of the DVD settings in Compressor then set the video bitrate to about 7.5/mbps because anything over that bitrate may cause playback errors on certain DVD players. I may receive compensation from my link. Make sure the audio is set to 192/kbps AC3 in Compressor.
You can setup distributed processing with Qmaster to enable multiple processor cores in a cluster and take advantage of multi core processing in Compressor. Additional info if necessary (more on the web by searching).
Then after Compressor is finished compressing the self-contained QT file take the compressed MPEG-2 file and .AC3 audio file and import them into a DVD Studio Pro project and follow these instructions to make the movie autoplay without any menus. I'll throw up some screenshots on the linked page soon to provide a visual reference of how to use DVD Studio Pro to create a DVD that autoplays without a menu.

Creating the highest quality dvd

I'm making a feature length film for Sundance. It's all shot in 1080i and the sound is in dolby digital. I'm new at all of this. What is the best quality set up for the best quality dvd non-hd? The movie is 1hr 50min. There are no special effects. I have to send it off Aug. 1st. Also, what is the best way to burn it after compression? Should I buy Popcorn or just use iDVD? Thanks for any help.

Compressor with DVDstudio works best,
however, in Compressor settings tab choose:
Apple>DVD>DVD Best quality 150 minutes.
This should give you a pretty good result but ...hey, it always depend on the source!
Give it a go.
G.

How do I produce the highest quality DVD from MOV exported from iMovie

What is the best method in iDVD11 for burning to DVD, an imported HD 720p or HD 1080p MOV file exported from iMovie11?
I have successfully exported a 5.5GB (66min) HD 720p MOV file from iMovie. I then used iDVD to import this MOV file and burn it to DVD. When I played the DVD the quality was nowhere near that of the imported HD 720p MOV file as played on QuickTime. The DVD also shows captions at the edge of the 16:9 TV screen instead of further inside as per the QuickTime screening of the HD 720p MOV file.
How can I improve quality and maintain borders in iDVD for the DVD output?

Hi
How can I improve quality and maintain borders in iDVD for the DVD output?
Quality.
• Use iMovie up to HD6 or FinalCut - as iMovie'08 or 09 or 11 - just delivers every second line to iDVD = less resolution
• There are no HD-DVD in real life - DVD is as standard SD-Video
• If You must use iMovie'11 then do not use "Share to iDVD" BUT "Share to Media Browser" and as Large (Not HD or other resolution - as result will suffers)
Border
• May be turning on TV-Safe area in iDVD can help a bit. ?
• If this is IMPORTANT - Then You have to re-do Your movie in FinalCut and here turn on TV-Safe area and shrink the movie area to within this. Now it will show all on an old CRT-TV - but with a black frame due to that no two CRT-TVs show exactly the same area and then TV-Safe must be less than this.
My - Un-specific notes on DVD-Quality. If You are interested.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (vers 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
About double on DL DVDs.
2.Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no QT-conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are playbacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround eg EnergySaver
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

Highest Quality DVD Encoding for 29.97 and 24p DVX Footage

I want to make sure that in both FCP and in Compressor that I am setup to have the best possible quality SD DVD.
I have edited footage that is both in 29.97 and 24p from a DVX100a in Final Cut Pro 6.04. My sequence settings are:
720x480 -NTSC DV 3:2
Pixel Aspect: NTSC
Field Dominance: Lower (Even)
Editing Timebase: 29.97
Compressor: DV/DVCPRO - NTSC
Quality: 100
Video processing and render settings are on the highest setting.
I am done editing and want to encode to SD DVD using Compressor. My settings are:
Video Format TAB - Untouched (NTSC, 29.97, 4x3, Field - Bottom First)
Frame Controls TAB -
Resize - Best
Output - Progressive
Deinterlace - Best
Adaptive Details - Not Checked
Anti Alias - 0
Details Level - 0
Rate Conversion - Fast
Set Duration 100%
Are these settings correct? When I brought the mpeg2 into DVD Studio Pro and put it into a track, it said that it was 720x480i. Shouldn't it be 720x480p? I am a bit confused. Any help would be appreciated.
Thanks!

Look, you really need to wrap your head around 24p, 30p, 24pA and 30i.
Interlace is not an ugly issue. It is a benefit. Interlacing normal on broadcast television. Your TV scans down and back up for each frame... alternating lines. When you shoot 24p on the DVX it puts it to tape where for every 3 frames of progressive it combines FOUR frames to give you TWO additional combined (interlaced) frames. So.. there are 6 sets of 5 frames per 1 second giving you 30 frames per second. If you take those 3 progressive frames by themselves 3x6 is 24 frames per second.
You OBVIOUSLY want to final out to 29.97 or 30 fps so you'll need those extra 2x6 frames to get you to 30!! If you wanted to final out to 29.97 AND you wanted progressive frames for EVERY frame you should have shot 30p mode.
Now... when are they ugly? When you are standing still on a frame. When are they unnecessary? When you plan to show them on a computer or progressive monitor. Remember, even when shooting progressive and playing it on a TV you will STILL have the TV doing interlaced scans... the only difference is the down scan is taken from the same point in time as the up scan.
Plus... you don't capture TO a sequence... you capture the video and edit it IN a sequence. You can still capture the footage in 24p at 29.97 and remove those 2x6 extra frames and edit in a 23.98 sequence.
Do some reading. It will only help.
CaptM

Burn Highest Quality DVD from iMovie '11 where source is from DV tapes?

Hello everyone -- I'm hoping to find an answer that isn't too wildly technical and doesn't discuss the HD aspect of things.
I recently used the Share --> iDVD method and the results were pretty bad. It looked unsaturated, bland, pale, and blah. But any clips with increased contrast or saturation (changed within the editing process) looked jaggy and pixelly. In one clip, I lowered the exposure and brightness of rippling waves in water so they were very dark. It looked great within iMovie, looked like pixellated psychedelic nausea-inducing goofiness after I exported it, and truly appalling on the DVD.
The source video isn't brilliant, but when I make a Quicktime movie of it (using Share --> Export Using Quicktime, i think default settings) it looks OK. (except for those waves.)
I'm using an iMac running 10.8.1, Snow Leopard, and iMovie '11. iDVD is 7.1.2
I also have Roxio Toast 10 Titanium.
Also, I used whatever the default settings are to capture the source video from a now-old Canon DV camera. Was that a mistake -- are there special settings I should dig up?
Thanks so much for any help you can offer.
Model Name:          iMac
Model Identifier:          iMac9,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB

Technically, it is a different process.
When you use SHARE/EXPORT MOVIE or SHARE/MEDIA BROWSER, iMovie creates you finished movie in H.264. When you use SHARE to IDVD, iMovie creates an intermediate movie for use only in iDVD that is in DV codec (or AIC codec if the original footage was HD).
Intuitively, it would seem that staying in DV would give better results, but my experience has been the opposite.
Here is a quick and dirty video showing the use of the Media Browser in iDVD. I guess you could call it a pane.

Making the best quality DVD from FCP

Can anyone suggest how to make the highest quality DVD from an HDV FCP project?

It's a fun website that I've seen people use recently : http://lmgtfy.com/
It basically generates a url that you can post onto forums etc, and when you click on it, it takes you to the 'mock' google page, followed by the results. It's a polite but fun way of saying "Don't be so lazy, and do a search!". No offense intended to the OP.
The Bruce image is one i had uploaded to Tinypic.com ages ago.
Glad you like it!

Inferior quality when viewing a built DVD in on a computer

I've seen a few postings with similar problems but have yet to find any good solutions. I'm creating a DVD and many of my client's clients will be viewing it on computers instead of NTSC monitors.
No matter how high I set the encoding bitrate in DVDSP (they say to never go above 8Mpbs - and that's pushing it), the menu screens and text in particular look really crappy when viewed on a computer. I've tried having the text be part of the background instead of a separate graphic, as well as using the text feature in DVDSP. I've run NTSC color filters in Photoshop and the font I'm using is thick and sans serif; but no matter what I do, once the DVD project is built and viewed via the Apple DVD Player (or any player on the computer) it just looks too compressed and not good. I've saved my menu graphics from Photoshop in a variety of formats (ended up using TIFFs), and tried a variety of text colors.
Unchecking "Deinterlace" in the Apple DVD Player makes it look a little better when viewing, but there's no way to automatically force a users computer to change this default setting, so no real help there.
Even further, if I export one of the files as an m2v in a separate app like QuickTime or Compressor and view it in QuickTime, it doesn't look nearly as bad as after DVDSP builds the project and does its encoding. I've tried 2 pass VBR, 1 pass, etc. Pretty much every possible setting/preference.
There has to be some way to improve the quality of still menus and text so that it looks decent on a computer monitor as well as on a TV when building a project with DVDSP.
Does anyone have any tips or suggestions?
Thanks!

Thanks for following up Chris - I apologize for any lack of detail in my posting.
Yes, I am mostly talking about quality concerns with menus though this is not specified in the title of the post. I understand that there is always loss in general quality when compressing as mpeg2, but to be more specific than before, text quality in the menus looks too artifacted around the edges. My client has described it as being "not sharp" and/or blurry.
I have used the proper resolution for the stills in Photoshop, and have experimented with using both 720x480 and 720x534. The problem is not with highlights, as the selected/activated states are separate elements from the text itself (rectangles that appear below the text).
In terms of viewing, I'm aware that scaling up to full screen will degrade the quality. It certainly looks better when viewed at normal size but it would still be nice to be able to control the compression on the still menus so that everything didn't appear as artifacted.
The eye is more forgiving when watching video because of the movement, but on the still menus the loss of quality is much more apparent.
Perhaps (as suggested) encoding the m2vs in Compressor first and then bringing them into DVDSP would yield better results than having the built-in encoder do the job (though my understanding was that it is essentially the same encoder).
My reference to viewing the m2vs in QuickTime was simply to point out the difference in apparent quality when viewing the m2v before DVDSP builds the project - when looking at the m2v in QuickTime the quality appears much better than when you view the DVD project in the Apple DVD Player after the project is built (even though DVDSP is using the same m2v). My concern/question with that issue is just to wonder if DVDSP does some kind of extra compression/encoding on an m2v when it builds the project, and if this can be controlled.
Thanks again for your comments and suggestions.

Which DVD to iPod Method (for windows) has the highest quality?

Hi everyone! This is the first thread I have started! *pats himself on back*...
...O.K. down to buisness...
Does anyone know or tested which dvd to ipod conversion method is best? I have looked at most of the threads here about the conversion methods, and I was wondering which had the highest quality picture, quickest conversion time, and taks up the least memory. Feel free to post your opinions, but I feel tested responces are more helpful. Thx for your time...

'dvd decrypter' is phenominal. all it essentially does is takes the '.vob. file off the dvd. it takes up alot of space, but the quality is perfect. somewhere on videora.com there is a link... its free too. as for a converter, ive tryed most of them, and totally preferred videora, onyl because it converts any type of file.

How to make a 2 hour long dvd? With highest quality? PE12

I made a two hour long event which I plan on burning into a dvd with the highest quality. It's avchd files. I want to burn it in h.264 1920x1080i pal dolby. I then tried to export the file onto my computer but it showed the file size to be 36,000 which is about 35 gb. I need to know if I export it directly to a dvd, will the size be smaller or the same. If it will be a large 35 gb then I guess I'll need a bigger dvd gb size which all I can find is blu-ray single layers, but I only find 25gb, also do this recordable disks be allowed to play in any dvd player or just blu-ray? Any good cites to buy them cheap? Here are the pictures, first one is where it shows I want to export it to my computer, and the second is to dvd, (DVD is not put in.)
file://localhost/Users/Dayana/Desktop/Screen%20Shot%202013-12-10%20at%2010.49.09%20PM.png
file://localhost/Users/Dayana/Desktop/Screen%20Shot%202013-12-10%20at%2010.45.45%20PM.png
Please help and don't be rude if my question is "dumb." I'm new to this.

Dayana
Please excuse if I go over some things that you aleady know, but again I do not want to take anything for granted that would prevent us from moving forward on your project.
When you wrote
When I go to Blu-Ray on the Status it says No Burners detected, and with AVCHD it says Busy.
1. Does your burn dialog have a field named burner location:? If so, does your Blu-ray burner show up as a choice in its drop down list?
2. And, with that "...with AVCHD it says Busy", have you selected Publish+Share/Disc/AVCHD disc and inserted a Blu-ray disc instead of a DVD disc, when you get the Busy message? The choice of Blu-ray is a Blu-ray disc; the choice for AVCHD is only a DVD disc. So, please clarify that point.
3. Have you tried Publish+Share/Disc/AVCHD disc with a DVD double layer single sided disc?
4. As a note..the maximum bitrate for burn to DVD-VIDEO on DVD disc 4.7 GB/120 minutes and 8.5 GB/240 minutes is the same, that is 8.00 Mbps. Whereas, the maximum bitrate is much higher for the AVCHD burn to DVD disc and the Blu-ray burn to Blu-ray disc (about 15.74 to 15.50 Mbps for AVCHD DVD, and about 20.19 to 24.0 Mbps for Blu-ray disc format on Blu-ray disc. More details on the exact values if needed.
What is the bitrate of the AVCHD file that you have imported to the Timeline? See if you agree...if the source has a higher bitrate than the export bitrate, would not you expect smaller file size for the export? And if the source has a lower bitrate than the export bitrate, would not you expect a larger file size for export?
Do some mini tests runs to prove or disprove that. Look at the Space Required and Bitrate reading in the burn dialog when you have a given disc in the burner tray.
Please review.
Thanks.
ATR
Add On...
Do you have the equipment that will play back AVCHD DVD as well as Blu-ray disc format on Blu-ray disc?

Printing to DVD at the highest quality possible

Hello out there. I have a question. I'm currently editing a project that was shot on 35mm film telecined full frame (4:3) to DigiBeta and down converted to DVCAM. Durning post we added a 1.85 matte (as he footage was originally composed for 1.85). My main concern is to output this footage at the highest quality possible. (Is FCP's Compression a good tool for this) Also I was wondering if anyone had a link to a discussion where I could find out how to burn a dvd with no menu that continuously loops. I'm currently using the FCP Production Suite with DVD S Studio Pro 4. Thanks
Erv

If you do a search you can find discussions on both of these topics as they have been discussed over and over, especially the compression one.
this is a good read:
http://www.kenstone.net/fcphomepage/first_playwarmouth.html

When I burn a 1.3 GB movie on DVD on the highest quality setting, the result is a blurry image. How can I fix that?

Why did I get a poor quality DVD result when the quality is good when I view it on Premiere Elements?

piboss314
What version of Premiere Elements are you using and on what computer operating system is it running?
What is the project preset for the project and what are the properties of the source media for the project.?
What is the screen size of the TV being used for viewing of the DVD-VIDEO on DVD disc? Do you have the
same problem if you view the DVD-VIDEO on DVD using a computer player?
We need to explore if this is a problem of expectation or something else.
a. If you take your Timeline content to AVCHD format on a DVD disc, what is the quality of that end product?
Just in case note, DVD-VIDEO standard 4:3 and widescreen 16:9 have the same frame size, 720 x 480 (NTSC) and 720 x 576 (PAL).
The widescreen has a 16:9 flag that stretches the video for display after encoding....in the case of NTSC to about 856 x 480. So, if you
have a high resolution Timeline content, what you are seeing in the end product DVD-VIDEO may not be faring well in the comparison.
b. Please define "poor" quality - not clear, blurry, images smudged looking, something else.
If you are starting with interlaced video with field order = Upper Field First, you may be running into a problem with the field order
that is part of DVD-VIDEO, that is, Lower Field First. We can correct that in 2 ways.
Please review the above. Your reply with details will direct us in customizing an appropriate troubleshooting plan.
Thank you.
ATR

Poor DVD viewing quality

This may be the wrong forum as I am not trying to burn or create a DVD, just play regular movies.
The quality is atrocious. I can barely see the movie, it's all dark and cartoonish. Also, videos on YouTube are virtually unwatchable.
Overall, the image quality is the worst I've ever seen on any computer. Is this just the way MAC's are, or is there something wrong with my particular notebook?

Hi
Sounds strange.
What kind of material did You feed iDVD ?
.avi, .wmv, .mpg4, .mp3 etc - or -
streamingDV from miniDV tape Camera
QuickTime .mov from iMovie or FinalCut ?
Else read my unsorted list on Quality
*DVD quality*
1. iDVD 08 & 09 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2. From
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU

HIghest quality DVD viewing experience?

Similar Messages

Maybe you are looking for