Highlight table control rows when select all button is clicked

Hi Experts,
I have a table control and filling up rows through user input and i have also created button such as Select All* , De-Select All, and Delete.
Now the issue is when i am pressing the select all button all the rows are marked for deletion(internal 'X' flag is set) but the rows are not highlighted(so that user will be able to know that all rows are selected).
Anything that i am missing, please guide......
Regards,
Abhijit G. Borkar

Ohh sorry there was some problem with the internet connect, that's why this duplicate happened.
Regards,
Abhijit G. Borkar

Similar Messages

HOW TO PERFORM SELECT ALL BUTTON IN ALV

Hi ,
i displayed output by using list display. in my status i have one button i.e. select all. when i click that button it has to select all the chckboxes in my list display.
anybody can send me the code please.
i am sending my code below.
report zmahi6.
type-pools : slis.
tables : zuser_secobjects.
data: t_header1 like zvfrcsthdr.
data : begin of t_header occurs 0 .
         include structure t_header1.
data : customer_name like zvsfrcsthdr-customer_name,
         kukla like kna1-kukla,
        end of t_header.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
        include structure t_header1.
data : box,
        input(1) type c,
      end of it_secobjects.
*data : it_secobjects like zuser_secobjects occurs 0 with header line.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
"type zuser_secobjects-start_date
p_edate(10) default '12/31/9999',
type zuser_secobjects-end_date,
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
start-of-selection.
perform get_data.
check sy-subrc eq 0.
set pf-status 'ZMAHEE'.
perform prepare_fieldcatalog.
perform alv_list_display.
form user_command using r_ucomm like sy-ucomm
                      rs_selfield type slis_selfield.
case r_ucomm.
    when 'DELETE'.
      perform delete.
endcase.
ENDFORM.
*& Form PREPARE_FIELDCATALOG
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
endform. " PREPARE_FIELDCATALOG
      FORM pf_status_set                                            *
--> RT_EXTAB                                                      *
form pf_status_set using rt_extab type slis_t_extab.
set pf-status '0001'.
endform.
*form user_command using r_ucomm like sy-ucomm
                       rs_selfield type slis_selfield.
*form user_command using r_ucomm like sy-ucomm
                     rs_selfield type slis_selfield.
case r_ucomm.
   when 'DELETE'.
     perform delete.
endcase.
*endform.
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
i_repid = sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_comomand = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_sort = i_sort
it_events = it_evts[]
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " GET_DATA
*&      Form delete
      text
--> p1        text
<-- p2        text
form delete.
data : lines type i.
do lines times.
    clear it_secobjects.
    read line sy-index field value it_secobjects-box.
    read table it_secobjects with key appln = it_secobjects-appln
                                 appln_user = it_secobjects-appln_user.
    if it_secobjects-input ne 'X'.
      it_secobjects-box = 'X'.
      modify line sy-index
           field value it_secobjects-box.
    else.
      it_secobjects-box = space.
      modify line sy-index
      field value it_secobjects-box.
    endif.
enddo.
endform.                    " delete
this program is not working when i select select all button. this button exist in pf status 0001.
anybody can modify the code and send me the code again.
thanks,
maheedhar.t

HI Rich,
i tried in this way also but i didnt get the output. i am sending my code again plz do the necessary changes and resend it to me if possible,
report zmahi6.
type-pools : slis.
tables : zuser_secobjects.
data: t_header1 like zvfrcsthdr.
data : begin of t_header occurs 0 .
         include structure t_header1.
data : customer_name like zvsfrcsthdr-customer_name,
         kukla like kna1-kukla,
        end of t_header.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
        include structure t_header1.
data : box,
        input(1) type c,
        checkBOX(1) type c,
      end of it_secobjects.
data : wa_ita like line of it_secobjects.
*data : it_secobjects like zuser_secobjects occurs 0 with header line.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
"type zuser_secobjects-start_date
p_edate(10) default '12/31/9999',
type zuser_secobjects-end_date,
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
start-of-selection.
perform get_data.
check sy-subrc eq 0.
set pf-status 'ZMAHEE'.
perform prepare_fieldcatalog.
perform alv_list_display.
END-OF-SELECTION.
AT USER-COMMAND.
CASE SY-UCOMM.
when 'DELETE'.
      loop at it_secobjects.
it_secobjects-checkBOX = 'X'.     "<-this would be the name of the
         modify it_secobjects.
      endloop.
    rs_selfield-refresh = 'X'.
     PERFORM ALV_LIST_DISPLAY.
endcase.
*ENDCASE.
*ENDFORM.
*& Form PREPARE_FIELDCATALOG
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
endform. " PREPARE_FIELDCATALOG
      FORM pf_status_set                                            *
--> RT_EXTAB                                                      *
form pf_status_set using rt_extab type slis_t_extab.
set pf-status '0001'.
endform.
*form user_command using r_ucomm like sy-ucomm
                       rs_selfield type slis_selfield.
*form user_command using r_ucomm like sy-ucomm
                     rs_selfield type slis_selfield.
case r_ucomm.
   when 'DELETE'.
     perform delete.
endcase.
*endform.
*form user_command using p_ucomm like sy-ucomm
*rs_selfield type slis_selfield.
case p_ucomm.
   when 'DELETE'.               " SELALL is the FCODE of ur push
*button
     loop at it_secobjects into wa_ita.
       it_secobjects-check = 'X'.
       modify it_secobjects from wa_ita.
     endloop.
endcase.
*endform.
form user_command using r_ucomm like sy-ucomm
                                       rs_selfield type slis_selfield.
case r_ucomm.
when 'DELETE'.
      loop at it_secobjects.
it_secobjects-checkBOX = 'X'.     "<-this would be the name of the
*checkbox field in your internal table.
         modify it_secobjects.
      endloop.
     rs_selfield-refresh = 'X'.
     PERFORM ALV_LIST_DISPLAY.
endcase.
endform.
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
i_repid = sy-repid.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_comomand = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_sort = i_sort
it_events = it_evts[]
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " GET_DATA
*&      Form delete
      text
--> p1        text
<-- p2        text
form delete.
data : lines type i.
do lines times.
    clear it_secobjects.
    read line sy-index field value it_secobjects-box.
    read table it_secobjects with key appln = it_secobjects-appln
                                 appln_user = it_secobjects-appln_user.
    if it_secobjects-input ne 'X'.
      it_secobjects-box = 'X'.
      modify line sy-index
           field value it_secobjects-box.
    else.
      it_secobjects-box = space.
      modify line sy-index
      field value it_secobjects-box.
    endif.
enddo.
endform.                    " delete
thanks,
maheedhar.t

Table Control not displaying selected data

I have 2 screens, screen 100 is the selection screen where i select the data to be displayed and 300 is my table control. When I select a single airline in screen 100, it displays all the airlines in my table control in screen 300, how can i fix?

Table control if built via the screen painter wizard uses the contents of internal table declared in the main program and defined in the wizard to display. Check how you are filling this table, perhaps your filling it incorrectly.

Select all button is not working in vl01n

Dear All,
We are facing a problem at the time of creating delivery through vl01n. At the time of selecting all line items of delivery on item overview screen, we are unable to select all line items. Due to this we have to delete each line item batches separately & to redetermine the batches or we can say select button is not working on item overview screen of vl01n. Also when we redetermine the batch split & return back to item overview screen, select all button works for line items perfectly.
thanks & regards
Deven Sharma

Hi,
In the user command write the code as per the sample given below:
FORM select_all .
CLEAR v_lisel.
DO.
    READ LINE sy-index FIELD VALUE v_chk.
    IF sy-subrc NE 0.
      EXIT.
    ENDIF.
    READ LINE sy-index FIELD VALUE sy-lisel INTO v_lisel.
    IF v_lisel+2(1) = ' ' AND sy-index GT 5.
      v_lisel+2(1) = 'X'.
      MODIFY LINE sy-index FIELD VALUE sy-lisel FROM v_lisel.
    ENDIF.
ENDDO.
ENDFORM.                    " select_all
reward if useful
regards,
ANJI

About table control in the selection screen

i want to create a table control in the selection screen of my report.i can create the table control using SE51.but how to program with the table control in the report.for example i should fetch the data for the personnel nos entered in the table control of the selection screen.how to do this.can any of u provide sample code for this.
thanks.

Hi vadivel,
Create internal table and create table control using same internal table
e.g.
data : begin of it,
end of it.
start-of-selection.
call screen 100.
If you create table control using wizard then code automatically come here.
Now, Put one push button in same screen where table control is available. let's say push button Display report.
Now, use export <IT> to memory id <ID> and submit report <report name> and return. now, define same internal table in this submitted report and use import <IT> from memory id <ID>. Now, table control data is available in internal table, use that data and make code as per your requirement. If you dont want to use push button then use menu bar and at user-command event.
Hope this help
Regards,
Parag

Needed select all button in alv report

Dear Experts,
                In alv report i want first field as button selectall then remaining fields must be displayed
this is my code,,
DEFINE m_fieldcat.
is_fieldcat-fieldname = &1.
is_fieldcat-hotspot   = &2.
is_fieldcat-seltext_m = &3.
is_fieldcat-col_pos   = &4.
is_fieldcat-outputlen = &5.
is_fieldcat-emphasize = &6.
is_fieldcat-Checkbox = &7.
append is_fieldcat to it_fcat.
clear is_fieldcat.
END-OF-DEFINITION.
m_fieldcat 'SLNO'     ''        text-112   '1'   '5'   'C310' ''.
m_fieldcat 'KPI'      ''        text-110   '2'   '30' 'C310' ''.
m_fieldcat 'PWEEK'    'X'       text-109   '3'   '16' 'C310' ''.
m_fieldcat 'CWEEK'    'X'       text-111   '4'   '16' 'C310' ''.
m_fieldcat 'MONTH'    'X'       text-122   '5'   '16' 'C310' ''.
m_fieldcat 'PMONTH'   'X'       text-132   '6'   '16' 'C310' ''.
m_fieldcat 'UOM '      ''       text-138   '7'   '10' 'C310' ''.
Thanks,
Thiru. R

Hi,
You can keep first field as checkbox. 'Select All' button is present in ALV whnever you use 'REUSE_ALV_GRID' F.M.
You can click on select all button that appears in ALV grid toolbar and all your checkboxes that appears in first field will get selected. Similar to 'Select All' there is 'Deselct All' button also in ALV grid.
Regards,
Saba

Internal Reconciliation when Selecting all the transactions to Reconcile

Hello Experts,
In Internal Reconciliation when Selecting all the transactions at once to Reconcile for setting up the Aging Report. It gives an error i.e. Reconciliation amount must be less than the balance due for this transaction 47901.
Help Required
Thanks & Regards

Hi Shazad,
please check note [1318821|https://service.sap.com/sap/support/notes/1318821] & see if this is the problem.
All the best,
Kerstin

ADF/JSF page loads when any command button is clicked

Hello All,
I am lost in the ADF/JSF page flow (using Jdev 10.1.3). Following are the tags (in order) in my page;
(WHEN THIS PAGE LOADS, IT GOES TO THE DATABASE TO GET VALUES (for the drop down lists that will appear on the page); THIS SHOULD HAPPEN JUST ONCE AND AT THIS POINT)
<f:view>
<afh:body>
<afh:html>
<af:form>
<af:panelpage>
<f:facet name="contextSwitcher">
<af:panelHorizontal> has a af:commandLink </af:panelHorizontal>
</f:facet>
<f:facet name="messages">
<af:messages/>
</f:facet>
<af:panelform>
<h:panelGrid columns="2" cellspacing="14">
has 2 panelgroups (one group has *2 SelectOneChoice lists (that need to be populated by fetching data from database* and the other group has 2 CommandButtons - 'Go' and 'Cancel") (GO BUTTON SETS THE SHOWPANEL() TO TRUE)
(WHEN GO BUTTON IS CLICKED, THE PAGE GOES TO THE DATABASE (AS IT DID ON PAGE LOAD). *THIS SHOULD NOT BE HAPPENING*. ONLY THE METHOD (action="#{muBean.doWork}" )THAT IS ASSOCIATED WITH GO BUTTON ACTION SHOULD BE CALLED)
</h:panelGrid>
<h:panelGrid columns="2" cellspacing="14" rendered="#{myBean.showPanel}"> (THIS ONE IS RENDERED WHEN SHOWPANEL() METHOD IS TRUE)
has 3 inputText fields
</h:panelGrid>
<af:table var="someTable" rendered="#{myBean.showPanel}"> (THIS ONE IS RENDERED WHEN SHOWPANEL() METHOD IS TRUE)
has a bunch of af:columns
</af:table>
<af:panelHorizontal rendered="#{myBean.showPanel}"> (THIS ONE IS RENDERED WHEN SHOWPANEL() METHOD IS TRUE)
has 3 af:commandButtons - submit, save, add row
(WHEN submit or save or add row BUTTON IS CLICKED, THE PAGE KIND OF LOADS AND GOES TO THE DATABASE (AS IT DID ON PAGE LOAD). *THIS SHOULD NOT BE HAPPENING*. ONLY THE METHOD THAT IS ASSOCIATED WITH submit/save/add row BUTTON ACTION SHOULD BE CALLED)
</af:panelHorizontal
</af:panelForm>
</af:panelPage>

<jsp:include page="/pages/includes/footer.jspx"/>
</af:form>
<f:verbatim>
<script type="text/javascript" src="../script/tree.js"></script>
</f:verbatim>
</afh:body>
</afh:html>
</f:view>
</jsp:root>
_*why is it that when the command buttons are clicked, the whole page is loaded? Only the methods associated with the action (action="#{newMapRequestItem.addARow}" ) should be called.*_
_*IS THERE A WAY TO AVOID THIS WITHOUT USING PARTIAL PAGE RENDERING ?*_
_*DOES MY TAG NESTING LOOK OK?*_
Edited by: user12054715 on Mar 24, 2010 12:00 PM

Can somebody please address this?
Thanks,

Table Control, change data of itab on enter-click

Hello all, I have an itab gt_task_704 which I use to display in a table control.
When the user changes a field and pushes on the ENTER-KEY, I'm trying to modify this itab with the new content.
The issue I have is that some fields are updated with faulty content.
In PAI I'm doing the following:
PROCESS AFTER INPUT.
*&SPWIZARD: PAI FLOW LOGIC FOR TABLECONTROL 'TC_705'
LOOP AT gt_task_705.
    CHAIN.
      FIELD gs_task_705-zzpcod.
      FIELD gs_task_705-zprest_descr.
      FIELD gs_task_705-zmdhrs.
      FIELD gs_task_705-zhrs.
      FIELD gs_task_705-discipline.
      FIELD gs_task_705-zmdpctouts.
      FIELD gs_task_705-zpctouts.
      FIELD gs_task_705-zmdpctovhd.
      FIELD gs_task_705-zpctovhd.
      FIELD gs_task_705-zcomment.
    ENDCHAIN.
    MODULE update_table_705. "INPUT.
"MODULE sort_705.
ENDLOOP.
====> update_table_705:
DESCRIBE TABLE gt_task_705 LINES gv_lines_705.
IF tc_705-current_line LE gv_lines_705.
    "READ TABLE gt_task_705 INTO gs_task_705 INDEX tc_705-current_line.
    SHIFT gs_task_705-zhrs LEFT DELETING LEADING '0'.
    MODIFY gt_task_705 FROM gs_task_705 INDEX tc_705-current_line
                       TRANSPORTING zhrs zpctouts zpctovhd.
ENDIF.
CLEAR gs_task_705.
It seems like a problem of sorting I think but I still didn't manage to change the correct lines.
Can someone please give a helping hand to this young abap'er
Thanks in advance

Mr.Dragovian you write the module between chain..endchain.
chain.
module Md1 on chain-input.
endchain.
MODULE Md1 INPUT.
   modify itab INDEX tc-current_line transporting fld(s).
ENDMODULE.
By this way,you will be able to get the correct user-entered data into itab.

How can I set a value in a field before create when a New button is clicked

Hi,
I am using
JDeveloper 10.1.3.1.0.3984 and
JHeadstart 10.1.3.1 release 10.1.3.1.26
I have one group and there is a detail group under that group.
From main group to detail group there are 3 field relating those groups.
field1
field2
fieldSEQ (auto-generated by database trigger)
These 3 fields are PK.
In the detail group, there is a New button. So, when the New button is clicked, it tries to create the record with those 3 fields value as those are coming from main group. As a result it's giving the duplicate error as that record already exists in the table.
But I don't want to create the record with that SEQ as that will be created in the trigger.
How can I set the SEQ temporarily any no. (-1) before create when the New button is clicked?
Can anybody help?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hello Syad,
What I would suggest is setting the sequence number at the creation of the entity object (so in the create() method) by using the database sequence. This way it will always be unique.
So something like:
protected void create(AttributeList AttributeList) {
super.create(AttributeList);
SequenceImpl sequence =
new SequenceImpl("KCP_SEQ", getDBTransaction());
setFieldSeq( sequence.getSequenceNumber());
If this still does not solve it: please go to the ADF Forum since this problem is an ADF problem, not a JHeadstart problem.
Regards,
Evert-Jan de Bruin
JHeadstart Team.

Af:statusIndicator does not show busy icon when a command button is click

Hi Guys,
af:statusIndicator does not show busy icon or motion when a command button is click
I am working on an excel data upload functionality on .jspx page. I use “af:inputFile” file uploader to upload an excel file then process the data and store it as a list of objects in memory and display it in “af:table” table
I added “af:statusIndicator” to the page to show the user that the page is progressing while the data is uploading and when it is saving the data to the database.
In this case, when the “af:inputFile” is clicked to upload the excel file - the status indicator shows a progress icon (movement) which is expected and is good. However, after the data have been display in the table when I click on a command button that saves the data to the database – I expected the status indicator to start its busy motion but that is not happening. Whereas, the command button grayed out and is disable when I clicked the button until the operation is completed.
Is there any way to start the statusIndicator when a command button is clicked?
I tried the following options
*<af:statusIndicator id="si1_uploadStatus" partialTriggers="pc1:cb1 pc1:table"/>*
Where pc1:cb1 is the command button and pc1:table is the table
*<af:commandButton text="Submit Uploads" id="cb1"*
*disabled="#{!viewScope.batchUploadController.allSavable}"*
*partialTriggers="::infFilePath"*
*action="#{viewScope.batchUploadController.saveUploadedData}"*
*blocking="true"/>*
Thanks,

Can somebody please address this?
Thanks,

How to switch from different views when a common button is clicked on using View states concept

Hi
i have made a single form for both Login Screen and Registration screen with two states :
1. BaseState which is the curret state of state of My application
2.registrationstate
I have a common button for changing from one view to another view .(Not related to any of the state)
At first the Login screen is loaded , and when the common button is clicked , i want to switch to Registration Screen .
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
    <![CDATA[
// Logic for common button needed .
    public function handleMe(event:MouseEvent):void
    ]]>
</mx:Script>
    <mx:states>
        <mx:State name="registrationstate">
            <mx:SetProperty target="{formitem1}" name="label" value="Email"/>
            <mx:SetProperty target="{button1}" name="label" value="Change state to Login"/>
        </mx:State>
    </mx:states>
    <mx:Form x="248" y="158">
        <mx:FormItem label="User Name" fontWeight="bold" id="formitem1">
            <mx:TextInput/>
        </mx:FormItem>
    </mx:Form>

    <mx:Button
        click="handleMe(event)"
        x="297" y="261" label="Change state to Registration" id="button1"/>
</mx:Application>

Originally I could not get that to work, but now I have it working:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
    <![CDATA[
      import mx.controls.Alert;
      public function handleMe(event:MouseEvent):void{
        trace(this.currentState);
        if(currentState=="" || currentState == null){
          mx.controls.Alert.show("base state");
          currentState = "registrationstate";
        }else if(currentState=="registrationstate"){
          mx.controls.Alert.show("registrationstate");
          currentState = "";
    ]]>
</mx:Script>
<mx:states>
    <mx:State name="registrationstate">
      <mx:SetProperty target="{formitem1}" name="label" value="Email"/>
      <mx:SetProperty target="{button1}" name="label" value="Change state to Login"/>
    </mx:State>
</mx:states>
<mx:Form x="248" y="158">
    <mx:FormItem label="User Name" fontWeight="bold" id="formitem1">
      <mx:TextInput/>
    </mx:FormItem>
</mx:Form>
<mx:Button click="handleMe(event)" x="297" y="261"
    label="Change state to Registration" id="button1"/>
</mx:Application>
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

Need to show popup when the Submit button is clicked for the second time ..

Hi guys,
I have a requirement where i need to show a popup or alert when the submit button is clicked twice . When it is clicked for the first time one method is been called and its process starts. When the user clicks the submit button for the second time they should be shown a popup stating "Submit button already been clicked, please clicked OK to continue".
Can anyone help with this please , its really urgent requirement ?
Thanks in advance

Hi,
I dont have any sample code to give you now. For quick reference, I can advice some psuedo steps to achieve your requirement. I dont have access to JDEV to test this. If any syntax errors then pls correct yourself.
1. Extend Controller since it is standard page ( Refer Anil Passi site for steps to extend seeded ontroller)
2. Write below logic in your Process Request method
super.processRequest(oaPageContext, oaWebBean);
pageContext.putSessionValue("status", "notInitiated");
3. Include below logic in your PFR method
if(pageContext.getSessionValue("status")!=null){
if("notInitiated".equals(pageContext.getSessionValue("status")))
super.processFormRequest(oapagecontext, oawebbean);
pageContext.putSessionValue("status", "initiated");
else
String message = "Display error message as required";
throw new OAException(message, OAException.ERROR);
You may need to import required packages ( Related to OAException).
Remeber, to sumbit the request, user need to refresh the page again so that "status" variable will be refreshed.
Hope it helps.
Thanks
venkat

How to make table control rows dynamic/unlimited using TC with Wizard

Hi Friends ,
I have designed a table control layout using table control with wizard.
Now the problem is when we design a TC layout ,then we have to design it on the page . The page has upper & lower limits. so the maximum size & maximum rows in layout is limited. I have tried to create a TC layout with maximum size & maximum rows . Maximum rows created in Layout is 25.
Now suppose if enduser wants 100 entries to enter by coping a file of 100 records in my TC present on entry screen , then ONLY 25 entries are displayed on entry scren before doing any user action or saving and after saving only these 25 entries are sved in DB. Means enrtries from 26 to 100 are not displayed on entry screen or saved in DB.
So my requirement is to display all 100 entries at a time in entry screen before saving with scrolling up & down facility and these 100 entries should also get saved in DB after clicking save button. In short I want dynamic entry screen table control which can show/dieplay Any Number . of entries whatever the number may be entered by enduser .
Plz note that I have used all 3 facilliteis i.e.
1. Scrolling
2. INSERT/DELETE
3. SELECT/DESELECT
while designing TC with wizard .
Scrolling buttons like FIRST PAGE, PREV. PAGE, NEXT PAGE, LAST PAGE are displayed.
BUT they are not functioning though there is system generated code present in both MPP and in PBO & PAI. After clicking any of them , data which is dislaying on entry screen ( Here it is 25 entries ) is getting cleared/disappeared from enry entry screen.
Waiting for ur response & solutions.
Thanks & Regards,
Sudhir

Hi Ashish ,
Do one thing .
At PAI of screen holding TC , there is module name tc_mark on request .
in this module , there is work area declared g_tc_wa .
Now go to tc_init module of pbo , where u have given your select command .
select * from ........................................
use this code .
if g_tc_wa is initial .
   SELECT * FROm
   g_tc_wa = 'X'.
   REFRESH CONTROL 'TC' FROM SCREEN dynnr.
   ENDIF.
Just do this , m sure all buttons, insert, delete , scroll bar.. everything will work .

Index of the Table control - No lead selection activated

Hi guys,
I have a table control where there is no lead selection.... One colum of the table contains push button on all rows and I need to find the row id based on the click of the which row button... How to do this???
regards,
Prabhu

Hi Prabhu ,
write the below piece of code in the button Action .
DATA lo_nd_node_table TYPE REF TO if_wd_context_node.
DATA lo_el_node_table TYPE REF TO if_wd_context_element.
DATA ls_node_table TYPE wd_this->Element_node_table.
*   navigate from <CONTEXT> to <NODE_TABLE> via lead selection
lo_nd_node_table = wd_context->get_child_node( name = wd_this->wdctx_node_table ).
CALL METHOD wdevent->get_context_element
    EXPORTING
      name = 'CONTEXT_ELEMENT'
    RECEIVING
      value = lo_el_node_table. " getting the clicked line
CALL METHOD lo_nd_node_table->SET_LEAD_SELECTION
    EXPORTING
      ELEMENT = lo_el_node_table. " Setting the lead
data lv_index type i.
CALL METHOD lo_nd_node_table->GET_LEAD_SELECTION_INDEX
    RECEIVING
      INDEX = lv_index. " getting the index of the lead line
Hope it will Helpfull .
Regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Jun 28, 2010 12:04 PM

Highlight table control rows when select all button is clicked

Similar Messages

Maybe you are looking for