Historical data load for newly added fields

Hi,
we are using cube 0UCSA_C01 with delta update which has gone live now the requirement is we have to add 2 new fields to this cube but the problem is how can we load previous data for dese fields dat has been updated already . Plz letme know hw this can b acheieved plz letme know the proceedure to achieve dis..
Thnx
help will b apprciated

Hi,
populate historical data into a newly added field in an infoprovider
How to populate historical data into a newly added field in an infoprovider
/people/dinesh.lalchand/blog/2006/02/07/loopback-process--follow-up
http://sap.ittoolbox.com/documents/popular-q-and-a/adding-characteristics-to-infocubes-2138
Thanks,
JituK

Similar Messages

Data loading for newly enhanced fields

hi friends
we have a cube that updated with data daily for last one year.now we needed to add two fields to that data source .if we do so how can we update data for those newly added fields in our data target for the previoue one year.
Thanks in advance
venkat.p

HI,
GOTO INfOPACKAGE screen ,select the two fields you want in the dataselection Tab you can give the values for those fields in the From Value and To Value, now goto update tab and choose initialize delta process and schedule the dataload
Hope this helps....

How to get the histoical data for newly added field in the cube?

Hi Experts,
I have small doubt on remodeling the infocube.
After adding the characteristic or keyfigure to a cube by using remodeling concept, how can I get the historical data for that particular field.
I have searched in SDN also but I didn't get proper information.
Please excuse me if I posted repeated question.
helpful answer will be awarded with poitns.
Thanks & regards,
Venkat.

hi
depending on your customer need you could use the remodelling functionnality but sometimes you have no way to retrieve what you want so another option you should consider is the following:
Advantages
that will cost less effort and guarantee the result.
Drawbacks
data is redondant for a while
space (depending on the volume of historical data)
So here are the steps :
step 1Adjust your extraction process according to the fields you need to add to populate the cube.
step 2 Then create a dso next or even a cube, feed the dso with a full load with the enhanced extractor you adjusted with the new fields in step 1 only once in fact this should be one shot.
step 3 Copy the query to the previous built multi-provider on top of the new historical data from dso and the running live delta cube. Adjust the queries if necessary.
optionnal Then if you want to get rid of the dso or new cube for historical data you could empty the actual one push the data from the new data provider and that's all.
bye
Boujema

This field name is not known. for newly added fields

dear sir,
i ma using VS 2008 with CR.NET. There are previously dsigned reports. when I add some new Fields to the report, it prompts the error message
[COMException (0x80041019): This field name is not known.
Error in File C:\DOCUME1\TERESA1\ASPNET\LOCALS~1\Temp\PolicyReceipt {F0958318-C3D3-493D-9140-4CEA08B27B98}.rpt:
Error in formula <Address>.
'{GetTransactionsForPolicyReceipt;1.ClientAddress_zh}+{GetTransactionsForPolicyReceipt;1.Address_zh_2}'
This field name is not known.]
   CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
   CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +240
here is the stored procedure
select Transactions.TransactionID
             , Transactions.PolicyDate
             , Transactions.PolicyNumber
             , ClientBranch.BranchName as ClientBranchName
             , c.last_name + ', ' + c.other_name as ClientName
             , c.last_name_zh + c.other_name_zh as ClientName_zh
             , c.last_name as ClientLastName
             , c.address as ClientAddress
             , c.Address_2
             , c.Address_3
             , c.Address_4
             , c.address_zh as ClientAddress_zh
             , c.Address_zh_2
             , c.Address_zh_3
             , c.Address_zh_4
             , c.email as ClientEmail
             , c.[language]
             , Gender.ShowName as ClientGenderName
             , Gender.ShowName_zh as ClientGenderName_zh
             , Institution.InstitutionName
             , Product.ProductName
             , FormulaType.FormulaTypeName
             , Frequency.FrequencyName
             , Frequency.FrequencyName_zh
             , Frequency.FrequencyPeriod
             , Frequency.IsLumpsum
             , Currency.CurrencyName
             , Currency.CurrencyName_zh
             , Transactions.FrequencyPayment
             , Transactions.Years
             , Transactions.Terms
             , Transactions.Remarks
, c.Address_2
             , c.Address_3
             , c.Address_4
             , c.Address_zh_2
             , c.Address_zh_3
             , c.Address_zh_4
are newly added
the other fields can be shown properly
Edited by: tomckw on Oct 24, 2011 10:04 AM

Only the RAS ( Report Application Server ) SDK includes API's to retrieve the version information. As you do not have full build of CR, you do not have the RAS SDK.
Just as an FYI. The APIs are:
CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument.MajorVersion
CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument.MinorVersion
A C# example code looks like this:
MessageBox.Show("Report Version: " + (rptClientDoc.MajorVersion.ToString() + "." + rptClientDoc.MinorVersion.ToString()), "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
I htink your only way to tell is to take the 10.2 report, add it to your VS2008 project and save. On save, if it says something like;
"this report was crated ina precious version of CR"
you know it is not 10.5.
But I do not think that is your problem here...
- Ludek

Not getting correct data for newly added field in 0FI_AR_4

Hi to all,
I have added SPART field from VBRK table into 0FI_AR_4 datasource .
Based on join BSID-VBELN = VBRK-VBELN to get SPART from VBRK table.
but i found that some VBELN are not maintained in VBRK table, But are Present in BSID table, so i am not get SPART for which no
VBELN maintained in VBRK.
Please can any one tell me, what condition should i take to get SPART from VBRK to 0FI_AR_4.
as i knew that only BSID-VBELN = VBRK-VBELN sufficent to get data for SPART.
or any different condition i required.
I shall be thankful to you for this.
Regards
Pavneet Rana

Thanks for reply,
i have written code for that like that.
SELECT SINGLE * FROM VBRK
WHERE VBELN = <fs_d>-VBELN .
if sy-subrc = 0.
<FS_D>-SPART = VBRK-SPART.
endif.
ENDLOOP.
according to it result are not capturing all SPART from VBRK. as it only matches the VBELN which are same in both VBRK and BSID table.
so how to get SPART from VBRK if same VBELN is not maintained in both tables.
Please can you tell me CODE for that.
I shall be thankful to you for this.
Regards
Pavneet Rana
Edited by: pavneet rana on Feb 1, 2011 4:53 AM

BPM reporting not displaying data for newly added field

Hello All,
I have a BPM process up and running fine. I have added reporting for monitoring no. of context field. I have also created a VC model for displaying the BPM report data. However, VC application is displaying only the context field that I had selected initially during the New Reporting Datasource creation. It'd not display the reporting data for the field that I added later.
Please help

Hi Apoorva ,
Have you checked in the process repository whether your new process is activated or not?
Thanks & Regards,
Rohit

Newly added field in the data Source not getting populated

Hello All,
We have added few fields in the Data Source. The Data Source is based on the InfoSet. We have included the field in the Infoset and have updated the code to fetch the value for the newly added fields.
When we perform the test extraction for this Data Source in RSA3, the newly added fields are not getting populdated with the value. In the system generated query's selection list, the newly added fields are not selected.
Please let mw know how to get the newly added field selected in the system generated query of the infoset.
Regards,
-Purnima

Hi,
As you said you have added the filed in Info Set. Have you included the same in data source? try if not.
If you are trying to create a query in source system to check the data. I guess in R/3 (ECC) then you have to include the new field in slection critera (ther is an option available on top menu).
I would suggest before creating any query go to RSO2 select the data source. Display the field structure and check if the filed is there or not. You maysee Infoset level data directly by data display from top menu. Try that optionas well to check.
I hope it will help.
THanks,
S

Trading Partner field (VBUND) is left blank in EC-PCA historical data load

Hello everyone,
I have a question regarding trading partner field (VBUND) in EC-PCA. In my company we are turning on this Profit Center Accounting functionality and we need to know how to bring this trading partner field filled when we make the historical data load.
We have tested the transactions 1KE8 (FI docs), 1KEC (MM docs) and 1KE9 (SD docs) that are used to transfer real data for GLPCA table. Unfortunately, VBUND field is left blank when using these transactions.
This impacts the opened journal entries for AR/AP (Accounts Receivable and Accounts Payable), as the ones made prior to the go-live of this EC-PCA functionality would not have this trading partner information, and the ones made after go-live would carry the information (i.e., not matching the documents).
Does anyone know how to solve this problem?

I worked on your issue but it seems there is no standard option to update VBUND field apart from writing an ABAP program to update GLPCA from FI documents.
Regards
Siva

Newly-added field missing in the field catalog for NR00

I am about to creat condition record for condition type NR00 free goods . I need to make some customizing to meet our requirement .So I changed the field catalog for the condition table by adding a new field BWAST (purchasing document type) . After that I am going to creat a new condition table 501 with this newly-added field ,but I can't find the field in the right part for field catalog .
Can you give me some advice ? Thank you in advance.

I 've got the answers ,
Note 21040 - Allowed Fields not appearing for condition table
thaks

Newly added field not getting displayed in ALV output

Hi All,
   I'm adding one more field/column to be displayed in an old existing program that uses REUSE_ALV_FIELDCATALOG_MERGE to generate the ALV fieldcat.
DATA: BEGIN OF it_salary OCCURS 0,
        pernr LIKE pa0000-pernr,
        ename LIKE pa0001-ename,
        rtext like lv_rtext, -
added field
        waers LIKE pa0008-waers
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = driver
      i_internal_tabname     = 'IT_SALARY'
      i_client_never_display = 'X'
      i_inclname             = driver
    CHANGING
      ct_fieldcat            = lv_fieldcat[]
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program      = driver
      it_fieldcat             = lv_fieldcat[]
      i_default               = 'X'
      i_save                  = 'A'
      is_variant              = lv_tmplt
      is_layout               = lv_ls_layout
     i_callback_user_command = 'USER_COMMAND'
    TABLES
      t_outtab                = it_salary
    EXCEPTIONS
      program_error           = 1
      OTHERS                  = 2.
The newly added field is not getting populated in the lv_fieldcat table. Tried running programs BALVBUFDEL,
BCALV_BUFFER_DEL_SHARED then logging off and logging in but of no help.
Please provide suggestion for this issue.
Regards,
Sridevi S

Hi,
Fieldcat is buffered - so use
I_BYPASSING_BUFFER = 'X'
Since a while CL_GUI_ALV_GRID is available which does NOT need any fieldcat (is determined internally using RTTI). It is worth playing around whith this class if you have some time. This class is recommended for ALV Output by SAP (but no edit is possible - was never supported officially).
A simple use would be:
data: gt_output type standard table of (adjust!).
*simple ALV output
data go_alv type ref to cl_salv_table.
data go_functions type ref to cl_salv_functions_list.
data go_columns type ref to cl_salv_columns_table.
data go_column type ref to cl_salv_column_table.
*Exceprion handlig
data: go_exception type ref to cx_root,
      gv_errortext   type string.
** fill table gt_output ...
** ALV output
if not gt_output is initial.
    try.
        call method cl_salv_table=>factory
          importing
            r_salv_table = go_alv
          changing
            t_table      = gt_output.
      catch cx_salv_msg into go_exception.
        gv_errortext = go_exception->get_text( ).
        message gv_errortext type 'A'.
    endtry.
* enable all standard ALV functions
    go_functions = go_alv->get_functions( ).
    go_functions->set_all( ).
* hide MANDT
    go_columns = go_alv->get_columns( ).
    go_column ?= go_columns->get_column( columnname = 'MANDT' ).
    go_column->set_technical( ).
    go_alv->display( ).
Kind regards,
Holger

How to populate the data into the newly added infoobjects?

Hi,
how to populate the data into the newly added infoobjects?
Thanx in advance,
Ravi.

hi ravi,
here is one example how to enhance.
Goto RSA6- select the 0Material.- Click on Enhance extract structure-> it will take u to the next screen there u need to create the field material group1. and append it to 0Material.
Goback to RSA6-- RC on 0material-- it will take you to customer version edit screen- here unchk the Hide and Field only known in exit options n save it.
Next Go back to RSA6-- 0material- click on Function enhancement it will take you to CMOD Screen( here we need to enter the project name and click create if not created on click display)
In the next screen we find the function exits Like EXIT_SAPLRSAP_001 FOR T DATA AND EXIT_SAPLRSAP_002 FRO Master Data,_003 for Text n _004 for Hierarchies.
select the appropriate function exit and double clikc on it. It will take you to Function builder screen.
D Click on defn of Include ZXRSAU01. it will take you to abap editor screen.
here u need to include the code for the enhanced fields n also write the code to populate the dat for that particular field.
save it and avtivate the code.
Hope this Is helpz,
partha

Master Data Load for New Attribute

Hi Users,
We had to implement a separate load flow for a new field coming from R3. This field was to be added to existing master data object.
I added a new Display attribute for an existing 0GL_ACCOUNT master data object.
This new attribute along with some other existing fields is getting data from another master data object with an infosource in between because two transformations cannot be created for same source and target.
When i load the data i dont see data being populated for this new field. I did ACR, checked the keys e.t.c.
Source object has data but after executing DTP no data comes to this attribute. No routines or anything.
Please suggest
Regards
Zabi

Hi,
The situation is:
Field x from source maps to
1. field y ( which was existing field ) and also maps to
2. field z which is the new attribute.
field y has to get updated for company codes 10 for example.
field z for company codes 30.
now if i use same flow and map field x to both y and z then there is overwriting happening if 10 does not have value for x and 20 has then its not good.
So if i use a separate flow with infosource then i will map only x to z so after loads which means for 10 code if no value went in first dtp to y then if code 30 has value for x then z will only be updated and y remains empty....
Master Data Load for New Attribute

How to enter values for newly inserted field for maintenace view table

Hi ,
I have inserted new field for custom table which consits of maintance view..
I want to put some values in to this newly inserted field..
When i try to insert values bu useing se16,iam unable to view this newely inserted field..
Can you please let me know how can i insert values to this newely created field
Thanx,
Parnith

Hi Parnith,
It is easy to use a table maintainance to enter values to a database table....
if you have a table maintainace generator and you are not able to see the newly added field here is the reason
Everytime you add a new field , the table maintainance needs to be regenerated..The reason is that the screen you are using in the table maintainance is created within a program with respect to the fucntion group and not directly linked to the table..whenever you change the table,the function group is not affected and changes are not reflected in the table maintainance , so you have to regenerate by utilities-> table maintainance generator in sell for that table..once you do it , the function group assigned to the table automatically creates a new one with the latest fields added
Reward if helpful
Regards
Byju

New Price Updates for newly added Items Through VA02

Hi All,
Through VA02 ,If you change first date in line item we have written code in MV45AFZB(USEREXIT_NEW_PRICING_VBKD
) for updating price for that item.
Now the issue is if u add one more new line item through VA02 itself..here we were not getting that line item detials.because its not yet saved.
We want to update prices for newly added items also.

Hi Reddy,
For translation of any text , goto SE63 -> in menu TRANSLATION -> R/3 Enterprise - > Transport object -->
for Transport Entry of Object : R3TR SHI3 ZABC
then select target & source lang. click EDIT.
Hope this helps you.
Reagards,
Aby

Master Data Loading for Prices and Conditions in CRM - "/SAPCND/GCM"

Hi,
Could anyone give me some inputs on Master Data Loading for Prices and Conditions in CRM.
T. Code is: /SAPCND/GCM
I need to load data on a file (extracted from 4.6) for service contracts.
I tried LSMW : for this transaction, recording does not work.
I am trying loading thru Idocs (LSMW). But that too is note really working.
Do we require some custom development for this , or is some SAP standard funcntionality available ??
Can anyone provide some valuable inputs one this.
Would appreciate your responses.

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

Historical data load for newly added fields

Similar Messages

Maybe you are looking for