How to get the histoical data for newly added field in the cube?

Hi Experts,
I have small doubt on remodeling the infocube.
After adding the characteristic or keyfigure  to a cube by using remodeling concept, how can I get the historical data for that particular field.
I have searched in SDN also but I didn't get proper information.
Please excuse me if I posted repeated question.
helpful answer will be awarded with poitns.
Thanks & regards,
Venkat.

hi
depending on your customer need you could use the remodelling functionnality but sometimes you have no way to retrieve what you want so another option you should consider is the following:
Advantages
that will cost less effort and guarantee the result.
Drawbacks
data is redondant for a while
space (depending on the volume of historical data)
So here are the steps :
step 1Adjust your extraction process according to the fields you need to add to populate the cube.
step 2 Then create a dso next or even a cube, feed the dso with a full load with the enhanced extractor you adjusted with the new fields in step 1 only once in fact this should be one shot.
step 3 Copy the query to the previous built  multi-provider on top of the new historical data from dso and the running live delta cube. Adjust the queries if necessary.
optionnal Then if you want to get rid of the dso or new cube for historical data you could empty the actual one push the data from the new data provider and that's all.
bye
Boujema

Similar Messages

  • BPM reporting not displaying data for newly added field

    Hello All,
    I have a BPM process up and running fine. I have added reporting for monitoring no. of context field. I have also created a VC model for displaying the BPM report data. However, VC application is displaying only the context field that I had selected initially during the New Reporting Datasource creation. It'd not display the reporting data for the field that I added later.
    Please help

    Hi Apoorva ,
    Have you checked in the process repository whether your new process is activated or not?
    Thanks & Regards,
    Rohit

  • Not getting correct data for newly added field in 0FI_AR_4

    Hi to all,
    I have added SPART field from VBRK table into 0FI_AR_4 datasource .
    Based on join BSID-VBELN = VBRK-VBELN to get SPART from VBRK table.
    but i found that some VBELN are not maintained in VBRK table, But are Present in BSID table, so i am not get SPART for which no
    VBELN maintained in VBRK.
    Please can any one tell me, what condition should i take to get SPART from VBRK to 0FI_AR_4.
    as i knew that only BSID-VBELN = VBRK-VBELN sufficent to get data for SPART.
    or any different condition i required.
    I shall be thankful to you for this.
    Regards
    Pavneet Rana

    Thanks for reply,
    i have written code for that like that.
    SELECT SINGLE * FROM VBRK
    WHERE VBELN = <fs_d>-VBELN .
    if sy-subrc = 0.
    <FS_D>-SPART = VBRK-SPART.
    endif.
    ENDLOOP.
    according to it result are not capturing all SPART from VBRK. as it only matches the VBELN which are same in both VBRK and BSID table.
    so how to get SPART from VBRK if same VBELN is not maintained in both tables.
    Please can you tell me CODE for that.
    I shall be thankful to you for this.
    Regards
    Pavneet Rana
    Edited by: pavneet rana on Feb 1, 2011 4:53 AM

  • How to set a default date for a custom field of Date type in project server 2010.

    hi,
    can somebody help  me.
    How Can i set the default date for a custom field of date type in project server 2010 ?

    Dear Rohan,
    You can set default value to custom field thru Lookup table. Assign lookup table to custom field and set default value to some lookup value (Note: check the “Choose a value to use as a default when adding new item” checkbox).
    Regards,
    Avinash kumar | Blog:http://avigr8.wordpress.com | If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

  • Newly added field in the data Source not getting populated

    Hello All,
    We have added few fields in the Data Source. The Data Source is based on the InfoSet. We have included the field in the Infoset and have updated the code to fetch the value for the newly added fields.
    When we perform the test extraction for this Data Source in RSA3, the newly added fields are not getting populdated with the value. In the system generated query's selection list, the newly added fields are not selected.
    Please let mw know how to get the newly added field selected in the system generated query of the infoset.
    Regards,
    -Purnima

    Hi,
    As you said you have added the filed in Info Set. Have you included the same in data source? try if not.
    If you are trying to create a query in source system to check the data. I guess in R/3 (ECC) then you have to include the new field in slection critera (ther is an option available on top menu).
    I would suggest before creating any query go to RSO2 select the data source. Display the field structure and check if the filed is there or not. You maysee Infoset level data directly by data display from top menu. Try that optionas well to check.
    I hope it will help.
    THanks,
    S

  • Historical data load for newly added fields

    Hi,
    we are using cube 0UCSA_C01 with delta update which has gone live now the requirement is we have to  add 2 new fields to this cube  but the problem is how can we load previous data for dese fields dat has been updated already . Plz letme know hw this can b acheieved  plz letme know the proceedure to achieve dis..
    Thnx
    help will b apprciated

    Hi,
    populate historical data into a newly added field in an infoprovider
    How to populate historical data into a newly added field in an infoprovider
    /people/dinesh.lalchand/blog/2006/02/07/loopback-process--follow-up
    http://sap.ittoolbox.com/documents/popular-q-and-a/adding-characteristics-to-infocubes-2138
    Thanks,
    JituK

  • Is it poosible to control the start date for an assort idoc on the erp sise

    is it poosible to control the start date for an assortment list  idoc on the erp sise

    Hi rodeofive,
    As per my understanding, the issue is a performance issue. And it is caused by there are thousands of values in the drop-down list of parameters in the report.
    To work around this issue, I suggest you should make some changes in the report. For example, we can add additional two parameters with multiple keywords ahead, one for the dropdown contains 95k options, another for dropdown contains 24k options. Then all
    of available values which are begin with the keywords will display in the parameter list. In this scenario, we can create cascading parameters. One is a keyword parameter, and the other parameter is the drop-down list that based on the keyword to display the
    available values.
    For more details about the method, please refer to the following FAQ:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de6c783-9cb4-4b95-9be8-b59bc0049866/forum-faqhow-do-i-add-a-search-feature-in-the-parameter-with-long-drop-down-list?forum=sqlreportingservices#8de6c783-9cb4-4b95-9be8-b59bc0049866
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • 0HR_PT_2 How to get back historical data for new report time type

    Hi All Expert,
    We have implemented and using the 0HR_PT_2 extractor for the past whole year. The Delta is working. Recently, there is requirement to read more data from the ZL custer table, and more new BW Report Time Types are added to extract such data.
    The delta doesn't pick up the the past whole year data of the new report time type that we added.
    Do we need to re-initialize the load to get back those historical data every time when we add a new report time type?
    Please advice and Thx
    Ken
    Edited by: Ken Hong on Feb 27, 2008 9:24 PM
    Edited by: Ken Hong on Feb 27, 2008 9:25 PM

    P.s, all hidden files are shown in es file explorer as this backup folder was hidden originally. It has a '.' in front. So I'm pretty sure the folder it's gone, but as I've not erased my phone again, shouldn't the folder be somewhere in my SD card still and how can I find it using my Mac?

  • How to get account expiry date for Oracle Directory Server?

    I need to get the account expiry date for Oracle Directory server. Which attribute stores this value? Please let me also know the attribute type and how to fetch it.
    Thanks,
    Subrat

    Hello,
    Yes you can use nsAccountLock directly (When nsAccountLock=true, the object is inactivated and the user cannot log in)
    This is documented in Modifying Directory Server’s NsAccountLockAttribute Directly (Sun Java System Directory Server Enterprise Edition 6.2 In…  (release number is old but it does not matter, Thats the first one Ive found)
    You can also use dsutil account-inactivate as described in dsutil - 11g Release 1 (11.1.1.7.0)
    Sylvain
    Please mark this response as correct or helpful when appropriate to make it easier for others to find it

  • CL_DPR_TASK  how to get earliest fiish date for a task of cProject

    i found this method CL_DPR_TASK GET_SCHEDULE_ATTRIBUTES to retrieve earliest finish date.
    but i don't know how to assign the parameter IR_SCHEDULE_OBJECT to this method.
    could you help me with this?
    if i don't use this class, is there any other way to fetch the earliest finish date for a task of project?
    Edited by: Duan ZZ on Aug 26, 2010 5:09 PM

    BAPI_BUS2175_GET_DETAIL

  • How to get GR posting date for schedule line of scheduling agreement?

    I had hard time to tie the GR date to schedule lines. I need this information to generate vendor performance report. However, the GR date is tied to scheduling agreement item level only. One item line can have multiple schedule lines. Is there a way to link the GR date to actual schedule line? Thanks in advance!

    Hi,
    There will be icon called PO history in the over view screen of SA.Select the item and press it.May be this will be some what useful to you.
    Regards,

  • Automatically displaying the error text for a form field when the validator fails?

    Hi,
    Flex 2 has a very nice feature to display custom text next to
    a form field whose validation failed. But the user has to move the
    mouse over the form field to display the text. Is there a way to
    invoke this feature programmatically?
    What I would like to do is validate form fields on submit and
    - if validation fails for a form field - set focus on that form
    field and automatically display the custom error text in the red
    blurb. Focusing works fine but I cant' get the text to render...
    Markus

    Thanks Bregent.
    Weirdest thing...I just tried a Google search for a solution to this problem and came across another thread on this forum.  By the time I got to the bottom of it I realised one of those taking part was myself from years ago!  Jeesh, been here before or what!
    Changed my recordset to...
    <%
    Dim rsPROP__MMColParam
    rsPROP__MMColParam = "0"
    If (Request.Form("categoryID") <> "") Then
      rsPROP__MMColParam = Request.Form("categoryID")
    End If
    %>
    <%
    Dim rsPROP__MMColParam1
    rsPROP__MMColParam1 = "1"
    If (Request.Form("categoryID") <> "") Then
      rsPROP__MMColParam1 = Request.Form("categoryID")
    End If
    %>
    <%
    Dim rsPROP
    Dim rsPROP_cmd
    Dim rsPROP_numRows
    Set rsPROP_cmd = Server.CreateObject ("ADODB.Command")
    rsPROP_cmd.ActiveConnection = MM_cs_STRING
    rsPROP_cmd.CommandText = "SELECT prodid, product, categoryID FROM dbo.products WHERE ISNULL(?,0) = 0 OR categoryID = ?"
    rsPROP_cmd.Prepared = true
    rsPROP_cmd.Parameters.Append rsPROP_cmd.CreateParameter("param1", 5, 1, -1, rsPROP__MMColParam) ' adDouble
    rsPROP_cmd.Parameters.Append rsPROP_cmd.CreateParameter("param2", 5, 1, -1, rsPROP__MMColParam) ' adDouble
    Set rsPROP = rsPROP_cmd.Execute
    rsPROP_numRows = 0
    %>
    ...and it works fine.
    Appreciate the help. I would have taken your advice and done an If Else on the WHERE clause to acheive the same.
    Thank you.
    NJ

  • This field name is not known. for newly added fields

    dear sir,
    i ma using VS 2008 with CR.NET. There are previously dsigned reports. when I add some new Fields to the report, it prompts the error message
    [COMException (0x80041019): This field name is not known.
    Error in File C:\DOCUME1\TERESA1\ASPNET\LOCALS~1\Temp\PolicyReceipt {F0958318-C3D3-493D-9140-4CEA08B27B98}.rpt:
    Error in formula  <Address>.
    '{GetTransactionsForPolicyReceipt;1.ClientAddress_zh}+{GetTransactionsForPolicyReceipt;1.Address_zh_2}'
    This field name is not known.]
       CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) +0
       CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) +240
    here is the stored procedure
    select Transactions.TransactionID
                 , Transactions.PolicyDate
                 , Transactions.PolicyNumber
                 , ClientBranch.BranchName as ClientBranchName
                 , c.last_name + ', ' + c.other_name as ClientName
                 , c.last_name_zh + c.other_name_zh as ClientName_zh
                 , c.last_name as ClientLastName
                 , c.address as ClientAddress
                 , c.Address_2
                 , c.Address_3
                 , c.Address_4
                 , c.address_zh as ClientAddress_zh
                 , c.Address_zh_2
                 , c.Address_zh_3
                 , c.Address_zh_4
                 , c.email as ClientEmail
                 , c.[language]
                 , Gender.ShowName as ClientGenderName
                 , Gender.ShowName_zh as ClientGenderName_zh
                 , Institution.InstitutionName
                 , Product.ProductName
                 , FormulaType.FormulaTypeName
                 , Frequency.FrequencyName
                 , Frequency.FrequencyName_zh
                 , Frequency.FrequencyPeriod
                 , Frequency.IsLumpsum
                 , Currency.CurrencyName
                 , Currency.CurrencyName_zh
                 , Transactions.FrequencyPayment
                 , Transactions.Years
                 , Transactions.Terms
                 , Transactions.Remarks
    , c.Address_2
                 , c.Address_3
                 , c.Address_4
                 , c.Address_zh_2
                 , c.Address_zh_3
                 , c.Address_zh_4
    are newly added
    the other fields can be shown properly
    Edited by: tomckw on Oct 24, 2011 10:04 AM

    Only the RAS ( Report Application Server ) SDK includes API's to retrieve the version information. As you do not have full build of CR, you do not have the RAS SDK.
    Just as an FYI. The APIs are:
    CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument.MajorVersion
    CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument.MinorVersion
    A C# example code looks like this:
    MessageBox.Show("Report Version: " + (rptClientDoc.MajorVersion.ToString() + "." + rptClientDoc.MinorVersion.ToString()), "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
    I htink your only way to tell is to take the 10.2 report, add it to your VS2008 project and save. On save, if it says something like;
    "this report was crated ina precious version of CR"
    you know it is not 10.5.
    But I do not think that is your problem here...
    - Ludek

  • How to get fully qualified name for a class with just the class name

    I want to get the fully qualified name of the class at runtime. The only piece of information which I have is the class name.
    I want to create a runtime instance of a class with the class name [Just the class name].
    Is there is any way to achieve this using ClassLoader?
    Could anyone suggest me an idea?
    Cheers,
    Vinn.

    Nope. If you are given "List", will you decide that means "java.util.List" or "java.awt.List"? Of course you could prompt the user to make the decision for you, I suppose. But using a class loader isn't going to make the task any easier.

  • How to get a currency format for a character field

    for some specifix reason, we have a requirement to show character field (which results in value 633948) in the format $633,948
    how do i do this?
    if i do SELECT to_char(:c_1,'$999,999')) from dual;
    it gives me ora: 01722: invalid number error
    c_1 is a user parameter of data type character

    Try using TO_NUMBER first, as in something like:
    SQL> VARIABLE c_1 VARCHAR2(6)
    SQL> EXECUTE :c_1 := '633948';
    PL/SQL procedure successfully completed.
    SQL> SELECT TO_CHAR(TO_NUMBER(:c_1), '$999,999') FROM DUAL;
    TO_CHAR(T
    $633,948Hope this helps.

Maybe you are looking for