Hitting Stop Button in the middle of a JSP Request

          From a browser while servlet is doing some work for a users request, the user hits the stop buttom. In the process the
          servlet forwards the results to a JSP to be displayed using the request dispatcher, The result is the appserver goes
          into what looks like a loop.
          Any ideas how to handle a request that has not been finished when a user hits the stop button?
          We are using WL 5.1, SP7.
          Thanks.

The camera formats the memory card using the "FAT32" filesystem rather than a proprietary filesystem. This allows the card to be read by nearly any computer (Windows, Mac, etc.)
HOWEVER... there's a limitation in that filesystem that no single file can grow above a specific size. That size is 4GB.
Also, the camera documentation describes that the camera will stop just 1 second short of the 30 minute mark regardless of the file size.
In pro video, movies are normally constructed by bringing together many very short clips. The one-long-continuous-take video style isn't used. If you are attempting to record a long event in one-long-continuous-take then it would be better to use a video camera for the task.
Tim Campbell
5D II, 5D III, 60Da

Similar Messages

Simply loop a video with a play/stop button in the middle?

Hello, I am new to flash but I have CS4, so I have all the tools.
I have a .mov file and I want to simply encode the video (i assume with flash media encoder) to be a flash file which loops continuiously with a Play/stop button. I'll then have this movie playing on my html page...
How would i best achieve this? I cannot figure it out using the encoder!

Easiest way is to import the mov directly into Flash, follow the importing prompt, embed inside of a movie clip to loop. add your buttons on top and code to stop(), and play().

So i was updating my ipod touch (4g) to ios 6 and i needed to stop it in the middle of updating. so i held the home button and the lock button. it turned white and i tried charging it when it died but it went back to usual please help!

so i was updating my ipod touch (4g) to ios 6 and i needed to stop it in the middle of updating. so i held the home button and the lock button at the same time for it to restart. It started turning on with the apple symbol and then the screen went white. I kept trying to do the same thing but it wouldnt work. Eace time i did that the screen was a different color. I was yellow/white at one point, blue at another time and sometimes the color behind the apple symbol. It got really HOT and i just let it die. When it was dead i put it on a charger. once it got charged up it started turning on with the apple symbol. then it turned white again and then restarted without me touching anything. When it restarted it turned the blue again. i took it off the charger immediantly because i didnt want it getting as hot as it was before. ive tried every way i know how to fix it but not putting it in the computer because i dont want it to ruin the computer. Please help because i really dont want to get a new ipod. Ive read a lot about how to fix it here on apple but there all the same answer and it still doesnt work. Please respond ASAP! thank you! i could really use your help right now!

First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem.

My apple tv stopped working. When I hit a button on the remote I see the signal gets to the Apple TV because the little light flicks but nothing else happens. Anyone know how to fix this??

My Apple TV suddenly stopped working. When I hit a button on the remote the light on the apple tv flickers but nothing else happens. Anyone know how I can fix this?

I had the same problem; Apple TV was working proper then for no reason I got the continuous blinking front LED. The Apple TV has no sound or video output at all. I tried reseting the Apple TV via my Apple remote controller but that didn't do anything for me. I finally called Apple and they told me that the way to fix my box is to reset the Apple TV to factory default. So I had to attach the Apple TV to one of my Apple computers and launch iTunes. Once iTunes was running it recognized my Apple TV and I clicked on the option to restore to factory default. After the restore my Apple TV now works properly. My final action on the Apple TV was to sign into my account and enter my password.

I started downloading a song from iTunes and then stopped it in the middle of the download cause it froze, but when I tried to redownload it, iTunes said the song was already downloaded. But it does not show up in my music library on my phone. Help?

I bought a song on iTunes and it started downloading but then about half way through it seemed to stop downloading so I pressed the square stop button in he middle of the downloading circle so that I could try and restart the download. But when I went back to iTunes, instead of having the cloud and the arrow to let me download the song from the cloud next to it, it said "Play" as if I had already downloaded the song. So I went back to my music library to try and find the song but it's not there and iTunes isn't letting me download it cause it says I already have it. Please help.

http://www.everythingicafe.com/quick-tips-how-to-delete-songs-from-your-iphone-i pad-or-ipod-touch/2012/02/14/

TS1424 I just purchased a song and it stops right in the middle of song. How can I get the complete song I paid for?

I just purchased a song and for some reason it did not completely download the song. It stops right in the middle of the song.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
ipconfig /flushdns
Hit "ENTER" key
Restart your computer.
Now try your music again.

IPod classic stops playing in the middle of a song

I've had the same iPod classic for seven years. It still works very well, except that lately it stops playing in the middle of a song. I have to hit "play" for it to start playing again. Sometimes it will go for only ten seconds between stops, other times it will play just fine for several minutes before stopping. The song that I'm playing doesn't affect the stops. This only happens when I'm running, so I'm wondering if maybe the vibrations from running are what's causing it.
Does anybody have any suggestions for what I could do to fix this? I've tried restoring the iPod, and that didn't affect anything. I always keep the battery fully charged.

See if this helps ... https://discussions.apple.com/message/21623941#21623941

Why do i get error 1122 at dequeue element in consumer loop when i hit stop button

when i hit stop button from vi, the producer loop stops, the consumer loop gets an error and stops without reading all the elements and then my check queue status loop continues to run becuase it never goes to 0.
Any help?
Solved!
Go to Solution.
Attachments:
READ SIC AND LOG.vi ‏48 KB

matt198717 wrote:
i believe this is what you were talking about. If youve got any advice or pointers for this VI please let me know.
1. Your consumer loop should be using the Dequeue Elements.
2. Your consumer loop should actually be releasing the queue in the STOP case.
3. There is also no need for the polling to see how many elements are left in the queue.
4. Your wait in the producer loop shold only be when there is no data in the buffer (you have it in the wrong case).
5. Do not use the value from the Bytes At Port to tell the VISA Read how many bytes to read. You tell the VISA Read to read more bytes than you would ever expect the message to be. Let the termination character stop the read.
6. Use a VISA read right after intializing your port to sync up your messages.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Serial Port Producer Consumer.png ‏32 KB

Music stops playing in the middle of my song

All types of music I play (YouTube, purchased etc. ) just stops playing in the middle of the song and still has the pause button as if the music was still playing. This isn't the first problem I've had with the iPhone recently. My camera had condensation in it at what point and no water had gotten on the phone. Also, my lol button recently stopped working and it isn't stuck or anything. I don't understand why there has been so many issues with the phone. I take very good care of it and I have a lifeproof on it.

- First place the iPod in a sealed container/bag of rice for a couple of days. Change the rice daily. Do not turn on or charge before it is dry.
- The try the standard fixes, reset and restore, including restoring to factory defaults/new iPod.
- Try both headphones and speaker.
- If no usccessful then the water caused permenent damage to the iPod and service is required.

How to resize and place a Button in the middle of a Region

Hi,
I have a requirement where I have to place a button in the middle of a region. This is the only Region on this page and only one button on this region. I made the region bigger by placing the following code in the Region Footer:
<div style="height:300px; width:300px;"></div>
Now the Region is big and in the middle of the page. Now I have to place one button in the middle of this region. I am using HTML Button. I also want to increase the size of the button from the default. Can anyone suggest how to do this ?
Thanks
Naresh

Hi,
I have a requirement where I have to place a button in the middle of a region. This is the only Region on this page and only one button on this region. I made the region bigger by placing the following code in the Region Footer:
<div style="height:300px; width:300px;"></div>
Now the Region is big and in the middle of the page. Now I have to place one button in the middle of this region. I am using HTML Button. I also want to increase the size of the button from the default. Can anyone suggest how to do this ?
Thanks
Naresh

Why Does My Camera Stop Recording in the Middle of a Video??

Why does my Rebel T3i stop recording in the middle of me video taping?? Is it because I do not have enough space on my camera for a video? It lets me take plenty more pictures. And when it stops in the middle of a recording, I start recording again, and it works for a little while then stops again! I really don't get it. It is extremely frustrating because I am left with all these chopped up video segments and I completely miss something that my baby is doing (the reason I started taping in the first place!) I am begining to wonder if I should just invest in a video camera instead of taping with my camera. I would REALLY prefer not to, seeing as how I spent a fortune on it, and would like it to do what it is intended to do! Can someone please help??

The camera formats the memory card using the "FAT32" filesystem rather than a proprietary filesystem. This allows the card to be read by nearly any computer (Windows, Mac, etc.)
HOWEVER... there's a limitation in that filesystem that no single file can grow above a specific size. That size is 4GB.
Also, the camera documentation describes that the camera will stop just 1 second short of the 30 minute mark regardless of the file size.
In pro video, movies are normally constructed by bringing together many very short clips. The one-long-continuous-take video style isn't used. If you are attempting to record a long event in one-long-continuous-take then it would be better to use a video camera for the task.
Tim Campbell
5D II, 5D III, 60Da

The movie I rented on iTunes has stopped right in the middle of the movie because it hasn't finished loaded. How do I get it to start playing again before the rental expires?

The movie I rented on iTunes has stopped right in the middle of the movie because it hasn't finished loaded. How do I get it to start playing again before the rental expires?

Hello zooeyme,
I'd suggest reporting the issue to the folks in our iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

Songs stop playing in the middle of the track

Ok, so I've got hundreds on songs in my library and I noticed that certain songs stop playing in the middle of the song on my iPod. I get dead air, and then it starts playing the next song on the list even though the screen still shows the album art of the song that died. I have deleted the song from my player and then re-downloaded the song straight from iTunes only to have it happen again. I decided to run a little test and play that track on both my iPhone (3GS) and iPod (iPod Touch bought 2013) and sure enough, the song dies around the exact same time on both devices. I did not try syncing either devise to my computer (music files are not on my computer hard drive, but on a separate hard drive), so it wasn't like I kept removing and syncing a corrupted file. Now I'm finding more and more tracks have this same issue. So I have two questions:
1.) Is there a way to identify corrupted music files on my devices or will have to listen to each track in it's entirety to identify whether it is corrupted or not?
2.) Will I need to repurchase these tracks in order to correct the problem of playing in it's entirety?

I have similar problem on two photo sleeks - affecting the same songs. I think it is a problem in the ripping of the CDs rather than the hardri'ves - otherwise it would affect different songs?
Chris

How can I set up tablet shortcut menu button for the middle button my X230T?

I think I have a faulty X230T, there are now only three tablet buttons and the middle does not do anything. I have installed 7wg737.exe (tablet short menu for Win7), but it does nothing.
When I go into Tablet PC setting>buttons, only one button shows up and that's the screen rotation button.
Is there a way to assign the middle button to shortcut menu? Otherwise I'm unable to change brightness or volumn during tablet mode which would make this tablet unusable.

Hi Susan,
Try Butler...
http://www.versiontracker.com/dyn/moreinfo/macosx/20035

Is it possible to create run and stop button on the control pannel instead fo using the ones on the tool bar?

I have created a program which runs to all my specifications. The final thing I'd like to do is to be able to run it from the contrl panel.
Can i create a run and stop button on the control panel or am i limited to using the little white arrow button on the toolbar?

When you say Control Panel are you referring to the Front Panel of your VI? If so then yes you can have the program start automatically upon being opened and close with a button push on the Front Panel. Let me know if this is what you were looking for.
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Hitting Stop Button in the middle of a JSP Request

Similar Messages

Maybe you are looking for