Simply loop a video with a play/stop button in the middle?
Hello, I am new to flash but I have CS4, so I have all the tools.
I have a .mov file and I want to simply encode the video (i assume with flash media encoder) to be a flash file which loops continuiously with a Play/stop button. I'll then have this movie playing on my html page...
How would i best achieve this? I cannot figure it out using the encoder!
Easiest way is to import the mov directly into Flash, follow the importing prompt, embed inside of a movie clip to loop. add your buttons on top and code to stop(), and play().
Similar Messages
-
Hitting Stop Button in the middle of a JSP Request
From a browser while servlet is doing some work for a users request, the user hits the stop buttom. In the process the
servlet forwards the results to a JSP to be displayed using the request dispatcher, The result is the appserver goes
into what looks like a loop.
Any ideas how to handle a request that has not been finished when a user hits the stop button?
We are using WL 5.1, SP7.
Thanks.
The camera formats the memory card using the "FAT32" filesystem rather than a proprietary filesystem. This allows the card to be read by nearly any computer (Windows, Mac, etc.)
HOWEVER... there's a limitation in that filesystem that no single file can grow above a specific size. That size is 4GB.
Also, the camera documentation describes that the camera will stop just 1 second short of the 30 minute mark regardless of the file size.
In pro video, movies are normally constructed by bringing together many very short clips. The one-long-continuous-take video style isn't used. If you are attempting to record a long event in one-long-continuous-take then it would be better to use a video camera for the task.
Tim Campbell
5D II, 5D III, 60Da -
Why Does My Camera Stop Recording in the Middle of a Video??
Why does my Rebel T3i stop recording in the middle of me video taping?? Is it because I do not have enough space on my camera for a video? It lets me take plenty more pictures. And when it stops in the middle of a recording, I start recording again, and it works for a little while then stops again! I really don't get it. It is extremely frustrating because I am left with all these chopped up video segments and I completely miss something that my baby is doing (the reason I started taping in the first place!) I am begining to wonder if I should just invest in a video camera instead of taping with my camera. I would REALLY prefer not to, seeing as how I spent a fortune on it, and would like it to do what it is intended to do! Can someone please help??
The camera formats the memory card using the "FAT32" filesystem rather than a proprietary filesystem. This allows the card to be read by nearly any computer (Windows, Mac, etc.)
HOWEVER... there's a limitation in that filesystem that no single file can grow above a specific size. That size is 4GB.
Also, the camera documentation describes that the camera will stop just 1 second short of the 30 minute mark regardless of the file size.
In pro video, movies are normally constructed by bringing together many very short clips. The one-long-continuous-take video style isn't used. If you are attempting to record a long event in one-long-continuous-take then it would be better to use a video camera for the task.
Tim Campbell
5D II, 5D III, 60Da -
The movie I rented on iTunes has stopped right in the middle of the movie because it hasn't finished loaded. How do I get it to start playing again before the rental expires?
Hello zooeyme,
I'd suggest reporting the issue to the folks in our iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen -
CS4 "play-stop" button not working
OK hope someone might be able to help - I am trying to get CS4 working on my partners machine which is a Sony Vaio VGN-AR49G – specs here - http://vaio-online.sony.com/prod_info/vgn-ar49g/vgn-ar49g.pdf
A bit of history...
Recently installed Premier Pro CS4 on vista (Running CS3 previously on vista with no issues).
Running CS4 within days started to have conflicts between AVCHD and DV when editing in the same timeline – were recommended to upgrade to Windows 7. Upgraded to Win 7 32 bit. This is the course of action:
- After upgrading from Vista to Win 7 32 bit, got the Win 7 updates;
- Upgraded some drivers (used Driver Robot to detect driver updates required);
- Uninstalled CS4 suite and reinstalled;
- Downloaded CS4 upgrades…
Things seem to be running properly now except the "play-stop" button (or space bar) in both the "Source" & "Program Sequence" Screens doesn't work. Can scroll by moving the bar along the timeline, select in and out points etc… OK, but movie won’t play in source screen or program screen.
Have checked WAV, AVI, AVCHD … none will play.
Closed Premier Pro and open Premier Elements on the same machine and it is functioning fine – can play the same footage…
I’ve updated all drivers which Driver Robot seemed to think needed upgrading EXCEPT Intel ICH8 Family .. the upgrade failed and I haven’t been able to locate more up to date drivers on the web .. and found a note on my travels that these don’t need upgrading anyway.
http://communities.intel.com/message/72149;jsessionid=6169690E70B02BD075E4C1131A7ACC85.nod e5COMS
Help please!Thanks!
Really, so we're better to start from scratch rather than upgrade?? We'd have to re-load any other apps / drivers back on too after the install? Don't run too much else on the machine as it is purely for editing.
We have purchased the upgrade rather than straight install -- but if there's a pretty good chance that we'll solve the problem then we'll go buy that too. Interested in any comments you have to help me understand Win 7 install vs upgrade ... thanks! -
I have created a narration for a video, and it plays it while in the editor tools, but after saving it to my desktop, that version has no narration , can you help...Please.
timester
What version of Premiere Elements and on what computer operating system is it running?
How did you save your Timeline content which included the narration clip produced with the project's Narration Tool?
Publish+Share/Computer/ and then what? And, what preset? And, for that preset, did you use the default settings of the preset
or did you customize the preset under its Advanced Button/Video Tab and Audio Tab?
What other audio was in the project - any on Audio 1 or Soundtrack? Did you get involved with Smart Mix at all?
Let us start here. We will be watching for your follow up.
Thank you.
ATR -
Where can i find simple flash play/stop button tutorial
Can anyone help me where can i find simple flash play/stop
button tutorial. All i need to import a icon play/stop button, when
click it load wav file.
How can i attach media.fla
when u click btn
on(release) {
CodePlayer.start();
on(release) {
CodePlayer.stop();
action script
CodePlayer = new Sound();
CodePlayer.loadSound("ContactUs.wav",true);OK your sorta close. the .wav file "ContactUs.wav" couldn't
be too large a file, and you can't use 'loadSound' with a .wav, it
would need to be an mp3 file and you also have it set to be a
streaming file, which I would image is not necessary.
So under File>>import select the wav file and add it to
the Library. Select it, right click, and select 'linkage'. Enter a
name for the identifier like 'contact_id' and hit OK. Now go back
to your code on frame one, main timeline and change the code you
have to:
var CodePlayer:Sound = new Sound();
CodePlayer.attachSound("contact_id");
Now in your button handlers change to:
on(release) {
_parent.CodePlayer.start();
on(release) {
_parent.CodePlayer.stop();
} -
Certain music videos will not play in iTunes. The music plays fine but not the video. No picture. Same with the iPod. Other videos in the library play fine. Help.
Regular playlists vs smart playlist does not make a difference. What I noticed is that some videos create this behavior and some not. I created 2 videos and 2 music playlists, one with 2 songs and 2 videos (that I encoded myself with Handbrake). Another list with 2 videos and 2 songs, videos encoded with Handbrake, but that I noticed they triggered the behavior. The first playlist played fine, with no problems. The second one, created the problem. When I look at the video, it is the same type of video (bit rate, audio channels, etc...) I don't see why it would do that.
Later I will test: playing those videos in question and then selecting songs to see if they play. -
Need to stop with only one "stop button"
I have two vi's. One that monitors temperature and the other sends a D/O signal. They both work fine on there own but when I merge them into one vi I have to press both stop buttons for the vi to stop. I would really like to only have one stop button in the final vi.
Any suggestions would be appreciated.
Thanks in Advance,
Jason
Attachments:
dig_output_with_temp1.vi 127 KBJason,
You can edit the stop event case to use the same stop button as the temperature loop. Right click the event structure and select "Edit events handled by this case", then select the control named "stop (F)". Then you can delete the other button labeled "stop".
-Chris -
youtube loads but then when i click on a video it doesent play. it worked fine the other day and in the past and suddently it doesnt work. please help!!!!!!
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I bought a song on iTunes and it started downloading but then about half way through it seemed to stop downloading so I pressed the square stop button in he middle of the downloading circle so that I could try and restart the download. But when I went back to iTunes, instead of having the cloud and the arrow to let me download the song from the cloud next to it, it said "Play" as if I had already downloaded the song. So I went back to my music library to try and find the song but it's not there and iTunes isn't letting me download it cause it says I already have it. Please help.
http://www.everythingicafe.com/quick-tips-how-to-delete-songs-from-your-iphone-i pad-or-ipod-touch/2012/02/14/
-
so i was updating my ipod touch (4g) to ios 6 and i needed to stop it in the middle of updating. so i held the home button and the lock button at the same time for it to restart. It started turning on with the apple symbol and then the screen went white. I kept trying to do the same thing but it wouldnt work. Eace time i did that the screen was a different color. I was yellow/white at one point, blue at another time and sometimes the color behind the apple symbol. It got really HOT and i just let it die. When it was dead i put it on a charger. once it got charged up it started turning on with the apple symbol. then it turned white again and then restarted without me touching anything. When it restarted it turned the blue again. i took it off the charger immediantly because i didnt want it getting as hot as it was before. ive tried every way i know how to fix it but not putting it in the computer because i dont want it to ruin the computer. Please help because i really dont want to get a new ipod. Ive read a lot about how to fix it here on apple but there all the same answer and it still doesnt work. Please respond ASAP! thank you! i could really use your help right now!
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
I have created a program which runs to all my specifications. The final thing I'd like to do is to be able to run it from the contrl panel.
Can i create a run and stop button on the control panel or am i limited to using the little white arrow button on the toolbar?When you say Control Panel are you referring to the Front Panel of your VI? If so then yes you can have the program start automatically upon being opened and close with a button push on the Front Panel. Let me know if this is what you were looking for.
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved. -
ShowPageNavigation don't show any stop button in the CrystalReportViewer.
Hi,
Is it possible to have a stop button in the CrystalReportViewer ?
It exist in the Designer....very good if you hav many pages and press last page.
Rgds,
LarsHi Lars,
I don't believe there is any option to stop the report once started. In Crystal Report Designer we use the Async option to the database to stop the report query. We send a stop command to the SQL Server to stop processing the SQL. This is only available with DB servers that support Async. You may try that option in code or the report designer but I don't beleive this will work in the viewer. You may even be able to send the action using the DB servers SDK, this you will have to test and research. If you can stop the SQL from processing it should send the partial result set to CR and then give control back to your app. This is only in theory, I have not tried to do so.
For WEB forms they have enabled a progress bar. Check these posts on how to:
https://forums.sdn.sap.com/click.jspa?searchID=16709683&messageID=5759798
https://forums.sdn.sap.com/click.jspa?searchID=16709683&messageID=6000147
Thank you
Don -
When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)
Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e
Maybe you are looking for
-
Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as to store information from two other Windows computers (one running 7 and one with Vista)?
-
Dear All, I am trying to do Remote client copy from Production to Dev system (two system landscape).Below is my hardware configuration of DEV and PRD system : SAP - R/3 4.7(NU) , O/S - AIX , DB - ORACLE 9 PRD SYSTEM : DATABASE Server CPU - 2 (375 MHZ
-
Why does iTunes say my iPad is "over capacity" when it isn't?
Hi. I saw someone posted about there iPhone last night and added my question there, but since I've not had a response I will create a new question. I went to sync my iPad yesterday and I got an error saying it was "over capacity." I checked online an
-
Most calls I can be heard, except 800/toll free numbers
For some strange reason that no one can answer, I can call and recieve calls and be heard just fine. But when I call a toll free 800 number (like for customer service) I cannot be heard at all? At first, I thought my microphone was faulty, but I call
-
Ipad frequently shuts off while I'm working
We got the new Ipad 4 for Christmas and it randomly shuts off when we are using it. Is there a sensor along the rim of the ipad that I'm unaware of? I have applecare on it so I can call, but I just wanted to check to see if anyone is having these i