HM00 -Condition type not present in pricing procedure.

I have included HM00 as manual condition type in pricing procedure attached to the sales order through prcing procedure detrmination. But in sales order when I am entering the value manually for HM00, the error is "HM00 -Condition type not present in pricing procedure", but actually it is present in pricing procedure.
Any idea how to fix thie problem ?

Hi Sunil,
Just check in V/08 > <b>YOUR</b> pricing procedure and see if HM00 is included in it or not.
Hope this will definitely solve your issue
Reward suitably
Regards
SD

Similar Messages

  • Condition JEXC not working in Pricing procedure for Non Set Off

    Hi,
         While creating PO in case of Dealer procurements i; e we are not buying the materials from the direct manufacturer but from dealer  we need to have BED other than 8%(maintained in J1ID).
          I am using the condition type JEXC in the Pricing procedure which is used to overwrite the value of BASIC Excise Duty in   the Tax procedure. For this I have added JEXC in our Pricing procedure with subtotal as "5".
       JEXC value in the Condition tab becomes the value of JMO1/JMO2 in the invoice tab.
      Now for Set off cased it is working fine. I used to put value in the JEXC in the condition tab other than actual 8% value and it overwrites the value of BED(JMO1/JMO2) .  
    But for Non set off cases it not working correctly.  It overwrites the value of BED(JMO1/JMO2) correctly but the SECSS % becomes zero. Can anyone suggest me the way I can go for non set off case .

    Hi
    Kindly have a look: http://help.sap.com/erp2005_ehp_03/helpdata/EN/0e/db7eb4e9114d85a9335fb1df617504/frameset.htm
    Regards
    Prasanna

  • Condition type EK01 missing in pricing procedure A V (error message V1206)

    Hi gurus,
    We get error message "condition type EK01 missing in pricing procedure A V" when creating a Billing request from a SErvice Order through TX-DP90.
    We reviewed customizing regarding this issue:
    ODP4 - SD Document linked to condition EK01 (this condition shall bring the actual cost in the order)
    ODP1 - Dinamyc item profile to create Billing Request.
    Pricing procedure: sales area assignments, condition types (including EK01)
    but error still shows.
    Any idea what additional setting is necessary in customizing so EK01 is transfered to the SD doc in DP90?
    Thanks,
    VL

    Hi Lakshmipathi,
    Thanks for your answer.
    I have taken a look to note you mentioned but it is related to Resource Related Down Payments customizing, which is not our actual requirement.
    The note mentions though condition type EK01 for the purpose I am commenting: "...when the system processes a final invoice date, it determines condition type EK01 as the active price condition, thereby billing the actual costs".
    Condition Type is in our pricing procedure with all the usual SD customizing settings, why is the system unable to process the costs?
    Thanks for your always great help,
    VL

  • Condition type field when Define Pricing Procedure Determination

    Hello Gurus,
        there is a condition type field when Define Pricing Procedure Determination. what does it mean ?
    Many thanks,
    Frank Zhang

    Here is are the details of various fields while configuring pricing procedure.
    A. STEP
    This indicates the number of step-in the procedure.
    B. COUNTER
    This is used to show a second ministep
    C. CONDITION TYPE
    This is the most important component in the pricing procedure. The rates are picked up from this element, on the basis of the properties described.
    D. DESCRIPTION
    This forms the description of the condition type.
    E. FROM
    This is used to define the progression of the calculation and range of subtotals
    F. TO
    This is used to define the progression of the calculation and range of subtotals
    G. MANUAL
    This function enables to allow the condition type to be entered manually also apart from automatic pickup.
    H. MANDATORY
    This function identifies the conditions that are mandatory in the pricing procedure. The sales price is a mandatory condition type.
    I. STATISTICS
    This can be used to represent the cost price of the material sold, generally used for study statistical impacts of price
    J. PRINT
    The activation of this function will enable the printing of the values and conditions to the document.
    K. SUBTOTAL
    A key is assigned from the drop down menu; this can be used by the system in other area like Sis for reporting purpose also
    L. REQUIRMENT KEY
    This function is used to assign a requirement to the condition type. This requirement can be used to exclude the system from accessing the condition type and trying to determine the value. This can be used to specify that the condition type should only be accessed if the customer has a low risk credit.
    M. ALTERNATE CALCULATION TYPE
    This function allows you use a formula as an alternative in finding the value of the condition type, instead of standard condition technique. this can be used to calculate complex tax structures.
    N. ALTERNATE CONDITION BASE VALUE.
    The alternative condition base value is a formula assigned to a condition type in order to promote an alternative base value for the calculation of a value.
    O. ACCOUNTS KEY
    The account keys form part of account determination. These keys are used here to define the posting of the revenue generated to respective account heads& to subsequent assignment to GL accounts.
    PR00- ERL
    K007/KA00- ERS.
    KF00- ERFu2026u2026u2026u2026.& so On.
    P. ACCRUAL KEY.
    The accrual keys form part of account determination. These keys are used here to define the posting of the revenue generated to respective account heads& to subsequent assignment to GL accounts and payment to respective parties.
    Kalpesh

  • Condition type is missing in Pricing Procedure determination

    Hi experts,
    We have a problem with Pricing Condition type in CRM.
    We have created a Transction in CRM as a follow up for the Transaction which is replicated from ECC to CRM the pricing procedure has been determined. But the net value is "0".
    when I checked in the conditions tab page "the condition type is missing" I checked Pricing Procedure the condition type is very much there. Then I checked for access sequence for that Condition type "Access sequence is also maintained.
    Then I checked copy controls for the Source and Target Item categories, for copy conditions the indicator is set up as "copy conditions,Redetermine taxes" then I changed it to "Copy all conditions".
    But still it is not happening.
    Can any please help me in this regard? Did I miss any configuration?
    Any help will be rewarded with points.
    Regards,
    Frederick.

    Hi Fredrick,
    This requirement must be assigned in your Pricing Procedure for condition type VKPO.
    The system first checks whether the requirement is fulfilled and than only execute that condition type.
    Requirements are nothing but Java Routines, which check for some condition before executing a condition type.
    For this Go to path
    IMG: CRM-> Basic Functions-> Pricing-> Define settings for Pricing-> Create Pricing Procedure.
    Choose your pricing procedure here. Here for the condition type VKPO requirement 41 must be assigned in column REQ. The requirements are coded in JAVA in SAP CRM.
    If this Pricing Procedure has been downloaded from SAP R/3, u can check in R/3 itself (Tcode: V/08) what the requirement is meant for, but choosing F1 and than the path for customizing.
    Regards,
    Shalini Chauhan
    Edited by: Shalini Chauhan on Apr 29, 2008 2:43 PM

  • Pricing condition type  is inactive in pricing procedure

    hi,
    We have two  base price in our pricing procedure ,
    fixed -pr00
    and wight wise.-pr01
    both have condition class-B
    while doing VA01 conditon type is showing as inactive(-Y-inactive because of subsequent price.
    Please need ur help

    Thanks for your early reply,my client do not want to make the !st conditiontype (PR00) as discount and surcharge.
    let me elabrate the pricing procedure more detail.. we have two pricing procedure for export sales.
    1-export sales -zabexp
    2-Deemed export sales-zadexp
    pricing procedure -zabexp
    condition type                                     from      to      manual       required   
    proo(base price)                                      -            -         -                   -
    pr01 (base price weight wise )                -           -           -                   -
    it is runing well in zabexp. but the same setting is not running in zadexp.
    Need Help.

  • Condition type ztc1 in TAXINJ PRICING PROCEDURE

    HI,
    Condition tye ZTC1 TCS in TAXINJ was not come on invoice why because ZCTC1 requirement 905 is missing in scrap sale organsiation
    905 requirement says that user parameter should be maintain in own data at the user system as
    VKO= OT00 sale document type
    Is it possible to maintain ZTC1 in  ZOTSALPricing procedure for sale org and make 905requirment without user parameter.
      regards
    ajai

    whatever u asked is related to your routine .since your question is not clear but giving you some sonl.
    Since Condition type ZTC1 appeared in order pricing and not coming this condtion in billing documents , see the copy control from delivery to billing(if relevent for delivery) or else from sales to billing doc . Check the pricing type on its item level or in billing document try update pricing to carry out new pricing .
    2 > you can remove the requirement 905 from your procedure .
    Regards
    Sourabh Singh .

  • Condition type not appearing in Pricing report

    Hello all,
    There are 2 condition types
    ZR00 - condclass B, calc type C, item condition, with acc seq Sales Area/Material and
    ZQA2 - condclass A, calc type C, item condition, with acc seq Sales Area/Customer/Material.
    I have maintained condition records for both & created a pricing report with field name Condition type for which position is Page Header of Pricing report.
    However when i fire this report condtype ZR00 appears but ZQA2 does not. Please advise.
    Thanks
    -Dinesh

    Hi Dinesh
    In the condition table , maintain the key combination of sales area/Customer grp /customer/material and then generate the report. Then you may  get the output  . But make sure you have maintained the customer group in CMR also.
    But it is better to reduce the key combination you have maintained , because there are many feilds which are involved, may be that could be the reason you were not getting output.
    Regards
    Srinath

  • Pricing Conditions are not updating in pricing procedure

    Dear Experts,
    I have created new condition table to maintain prices & assinged the same to access sequence. I have ticked the exclusive option also. But this option is ticked for each & every key combinations. Now I have maintained price on new key combination but system is picking old value only.
    Pl. help me.
    Thanks

    hi
    this can be possibility
    The validity of OLD condition record is say from Jan 2010 to Dec 2999
    Sales order date is say Sep1, 2010
    New Condition record valididty is from August 2010 to Dec 2999
    now as for same condition, you maintaining condition record which is actually overlapping, so go to VK12, and try to delet the OLD condition record or try to make Deletion Indicator for Condition Item
    kindly let us know why you created new condition record when you can update the old with new prices
    go to VK12
    select combination and maintain new price and mark old 1 for deletion

  • Condition EK01 is missing in pricing procedure A V  when creating  DP90

    dear experts,
    I am generating the invoice with the help of DP90,here my issue is in PM side in service order IW51 in header data in customer address we are giving sold to party as xyzzzz and we are saving and this will flow up to DP90,from dp90 it will generate the debitmemo request and generating the billing document,when I am changing the customer as 1233333 in service order IW51, from pm side its doing well but when that flow to DP90 its not generating to debit memo request,its showing error as 
    Condition EK01 is missing in pricing procedure A V
    The condition issued is not in pricing procedure A V 
    I am not able to understand why this error is coming,what to do to solve this issue,please help me out.

    It can b'coz of from Source th costing structure is not getting executed.
    Check source, controlling config and also, cost sheet used for this process.
    I hope following 2 SDN thread will be able to assist you:
    - Condition type EK01 missing in pricing procedure A V (error message V1206)
    - error message in DP90: condition type not included in pricing procedure
    Regards
    JP

  • VPRS condition type not to display

    Hi all
    I have condition type VPRS in my pricing procedure but my client wants it should not be display to the all user while creating sale order. Is there any way.
    Kindly replay urgently.
    Vinod

    Hi Vinod,
    Specific condition types can be hidden on pricing screens; we did the same for VPRS condition type.
    In include LV69AFZZ there is a user exit - USEREXIT_FIELD_MODIFICATION; here you need to add code as follows. 
    if <whatever conditions in which you want to hide it>
    CASE SCREEN-NAME.
    WHEN 'KOMV-KBETR'.
    IF KOMV-KSCHL = 'VPRS'.
    SCREEN-ACTIVE = 0.
    ENDIF.
    WHEN 'KOMV-KWERT'.
    IF KOMV-KSCHL = 'VPRS'.
    SCREEN-ACTIVE = 0.
    ENDIF.
    WHEN 'KOMV-KWERT_K'.
    IF KOMV-KSCHL = 'VPRS'.
    SCREEN-ACTIVE = 0.
    ENDIF.
    ENDCASE.
    ENDIF (for conditions in which the field has to be hidden)
    However we found that this happened only at item level; header still showed the condition type. Smart users can proportionately allocate the header condition amount to arrive upon the item level values. But you may investigate along these lins to determine if it is possible at header too.
    Please reward with points if useful.
    Cheers,
    KC
    SAP SD

  • Condition ZOF2 is missing in pricing procedure A M LOCAL

    Hi,
    While creating a PO, appearing an error message Condition ZOF2 is missing in pricing procedure A M LOCAL..
    Where i have to configure it??
    Plz guide..

    hi
    plz check that U HAVE GIVEN PROPER SCHEMA FOR THE VENDOR  as it is detecting schema as RM0000
    or
    it means that u have not yet setup the manual excise
    check following configuration
    Use Condition Type "JEXC" in MM Pricing Procedure.
    You can use manual excise condition "JEXC" in case if your BED Rate is not fixed as 14% and you want to enter BED Value manually.
    Once you input value in JEXC then it will replace the value of BED in "Taxes" under "Invoice" Tab. And ECS / 2% ans SECess / 1%
    will get calculated on BED Value.
    Here use Tax Code of (14% BED + 2% ECS + 1% SEcess + VAT/CAT As applicable), system will calculate BED, ECS & SECess as per the % maintained in Tax Code. Once you enter value in "JEXC" condition, it will replace the value of BED and ECS / 2% ans SECess / 1% will get calculated on BED Value.
    For e.g.
    As per Tax Code;
    Base Value = 10000
    BED / 14% = 1400
    ECS / 2% = 28
    SECess / 1% = 14
    After putting value in "JEXC" as 1600 (For e.g.)
    Base Value = 10000
    BED / 14% = 1600 (Here 1400 will get replaced by 1600 under "Invoice" tab - "Taxes" button)
    ECS / 2% = 32
    SECess / 1% = 16
    I think the above example will make clear the use of condition type "JEXC"
    And Condition Type "NAVS" (Non - Deductible Tax) is used in MM Pricing which will bring value of CST from "Taxes" screen to "Conditions" of PO. Check the attributes of NAVS condition type in M/06
    rgards
    kunal

  • Condition ZJBX is missing in pricing procedure A V

    SAP Master, I have met one Error in 'VF01'. If I put Condtion Type 'ZJBX' in required cell. It
    Produce the Error that is "Condition ZJBX is missing in pricing procedure A V".
    Please, Give me Solution.
    <u>Error Document Message:</u>
    Condition ZJBX is missing in pricing procedure A V                                                                               
    Message no. V1206                                                                               
    Diagnosis                                                                               
    The condition issued is not in pricing procedure A V .                                                                               
    System response                                                                               
    The system does not allow further processing of the document.                                                                               
    Procedure                                                                               
    Supply the missing entry in the pricing procedure in Customizing, or  
        delete condition ZJBX from the document.                              
        If you do not have the authorization to do this yourself, contact your
        system administrator.

    Hi,
       Check the pricing procedure ,you have assigned to the combination of sales area,customer pricing procedure and doc pricing procedure in T-CODE "OVKK".
       When you create a sales order you generally put sales doc type and the above combination determines which pricing procerdure would be determined depending upon the sales area and customer you put i pricing procedure.
      Once you know your procedure ,you can assign the condition type "ZJBX" to the pricing procedure in Maintain pricing procedure(pricing configuration).
       Reward points if this helps.
    Regards
    Karan

  • Pricing condition type not working

    Hi all,
    A pricing condition type is present which is supposed to make the netvalue to zero after the order reason is changed to rejection using va02. But even after the order reason is changed to rejection and we tried to genrate new pricing document, the netvalue is not becoming zero. How can I debug this? The condition type is not determined by using condition records.
    Thanks in advance.

    Hi Smith
    This should be working in the following ways.
    1) Order Reason/Rejection Reason being a field in the Key combination with 100% Discount triggering Zero Net Value
    if this the case, then you should check in Condition Analysis wheather the value has conrrectly flown in the condition table , if not why it has not flown in to the condition table (It could be missing value in the condition record or a prblem in the field catalogue user exit-  you need to take Developer's help as suggested by others)
    2)  Using a Requirement and changing the Net Value Zero without any condition table field.
    If so, put a break point in the requirement and check why this has not been successful in this scenario.
    I hope the replies would help you to some extent in solviing the issue.
    Thanks
    Subbu

  • Condition type not appearing in PO line item

    Dear All
    I made a condition type Y001 for agriculture tax with below mentioned config. and marked as both header and item condition.
    Cond. class   A Discount or surcharge
    Calculat.type A Percentage
    Cond.category B Delivery costs
    Manual entries      C Manual entry has priority
    Now problem is that when I am making contract in contract line item condition Y001 condition is appearing in dropdown and I am able to enter the same in contract and save it.But when I am trying to make a PO by referring the same contract with line item condition Y001, this same condition is not appearing in PO and also it is not appearing in dropdown also so that I can manually enter the same.
    Please let me know why system is behaving like this.
    Regards
    SK

    satish kumar wrote:
    In short condition type Y001 is appearing in contract line item condition tab while making contract but same condition is not appearing in PO line item condition tab while making PO.
    Hi Satish,
    Perhaps you have not assigned the pricing procedure to the Purchasing Orgn & Vendor in IMG Schema determination. Have a chk once and if you have assigned try maintaining a PIR and I hope it should populate the priceing procedure and your cond type Y001 in the PO also.
    Anything pls revert
    Regards
    Shiva

Maybe you are looking for