Hola, altavoces 6700 (6

Hola, necesitaria de alguien que tuviera el esquema electrico de los altavoces creative 6700 (6.), o con una foto del circuito electrrico que aloja el altavoz de los graves, ya que se me han roto tres resistencias y como se han quemado es imposible saber sus valores de ohmios. un saludo

If I dun remember wrongly, there's a switch at the woofer. Try changing that to direct mode.

Similar Messages

No tengo audio en mis altavoces M30-70

Hola,
Compré mi ordenador hace una semana, y los altavoces funcionaban bien. Me conecté a una clase con los auriculares y funcionaban bien tambien.
Luego de esto ya no funcionan ni los altavoces ni los auriculares. Todos los settings estan bien, pero no cuando quiero hacer la prueba de sonido me sale un error como que no se puede reproducir el sonido de prueba.
He reiniciado ya el ordenador y nada.
Que debo hacer?
Gracias

Hola Monpepa que tal,
Puede ser que el servicio de audio de Windows no este iniciado, verificalo, presiona teclas Windows + r escribe services.msc , ubica audio de Windows debe estar en ejecución si no es así inicialo.
Puede que también el problema sea relacionado al controlador,verificarlo en administrador de dispositivos, puede que ayude quitar el controlador actual para luego re-instalar, el controlador de audio se ubica en D/driver o sigue este enlace http://support.lenovo.com/es/es
Un saludo.
@Antony_Vamu
Comunidad en Español English Community Deutsche Community РусскоязычноеСообщество
Mis Lenovo: Y560p,Z580,Z500 touch,S920,T400,G50-70 ,Soy voluntario no trabajo para Lenovo, las opiniones expresadas por mi no representan a Lenovo, no se responde a preguntas de manera privada debes crear un nuevo tema, números del centro de llamada Lenovo Aquí , reglas de participación del foro Aquí , si encontraste solución a tu problema marcarlo aceptándolo como solucionado!!!!!

Hola tengo un ipad clasico y tiene un error

hola tengo un ipad y me esta dando el siguiente error cuando lo voy a restaurar me da el error # 1434 no se que hacer en este caso,ya lo he probado en muchas pc y hace lo mismo

lo siento por mal español, (usando translate). a veces los cables de los altavoces externos pueden aflojarse dentro y desconectar, si su iPad 2 está todavía en garantía puede que te lo arreglen o reemplazado por una nueva esperanza de que esto ayude.

Tengo un iphone 4s y no escucho ningún sonido por los altavoces

Alguien me puede ayudar, tengo un iphone 4s y no escucho ningun sonido por los altavoces, ya comprobe si estaba en Mue pero no, comprobe la configuracion y todo esta ok, que puedo hacer?

Hola, ni se rompan la cabeza tratando de arreglarlo o llevandolo a un tecnico que no sea de apple ni mucho menos arriesgando su equipo metiendolo al congelando, yo tengo el mismo problema y tan facil lo lleve al apple service y me dijeron que no tiene reparacion, me dijeron que si mi garantia de apple estaba todavia vigente me lo tenian que cambiar por un equipo nuevo y que tenia que hacer respaldo de mi info, entregar mi equipo y en 3 semanas me llega un equipo nuevo, no necesitan su factura de compra, simplemente necesitan su equipo y con el numero de serie ellos mismos checan la vigencia de su garantia. Suerte!

Fps1000 Altavoces/Speakers 4.1 Piezas de recambio/Spare Parts

Hola, he roto un macho Jack y no se lo que hacer me gustar?a pedir un nuevo cable con los 4 Jacks , osea el conjunto completo
2 machos Jack al ordenador
2 machos Jack al altavoz
y estos 4 machos se unen en
regulador del volumen
gracias
Hello, I have broken a male Jack and i don't know what to do I would like to ask for a new cable with 4 Jacks, osea the complete set
2 males Jack to the computer
2 males Jack to the loudspeaker
and these 4 males are joined in
volume regulator
Thanks
Message Edited by v10 on 03-11-2008 03:38 PM

Hola V10
Supongo que el cable que tienes roto es este
http://picasaweb.google.es/rmorinr/S...65850658526562
http://lh6.google.es/rmorinr/R9bsuke...s400/altavoces 3.JPG
Creo que est? un poco complicado encontrar recambios (dudo que creative los venda hoy en dia).
Yo trataria de repararlo ?que es lo que tiene roto igual cambiar el conector ? el cable te sale m?s barato (s? es eso lo que est? mal).
S? la opci?n de repararlo te resulta complicado trata de buscar en ebay ? google, creo igual puedes comprar alguno de segunda mano.
S? al final no puedes encontrar el cable junto con el control de volumen puedes comprar un par de cables directos con el mismo conector que el actual supongo que el de la foto inferior (el mismo cable que tienes roto pero s?n el control de volumen)
http://picasaweb.google.es/rmorinr/S...59479669779074
http://lh5.google.es/rmorinr/R9biUed...Audio_Jack.jpg
Conecta un extremo de cada cable en las conexiones REAR y FRONT detras del SUBWOOFER (foto inferior) y el otro extremo de cada uno de los cables en la tarjeta de sonido que tengas donde corresponda (REAR y FRONT)
http://picasaweb.google.es/rmorinr/S...59086606967054
http://lh3.google.es/rmorinr/R9bx90e...400/FPS000.JPG
TARJETA DE SONIDO REAR <----------cable---------->REAR SUBWOOFER
TARJETA DE SONIDO FRONT<----------cable---------->FRONT SUBWOOFER
Tiene que funcionar igual, el ?nico problema es que tendrias que regular el volumen desde windows (sinceramente no pierdes nada)
Saludos
Message Edited by Rad-Wulf on 03-11-2008 09:22 PM

DV 6700 Hard Drive

I had a DV 6700 and it ceased to work. I've replaced the aging with a computer with a new one, but I never backed up the data from the old one. I've pulled out the hard drive, and i've purchased and returned two hard drive enclosures. I can't seem to figure out what the exact kind of connection is. I'm somewhat computer literate, but I can't for the life of me find a hard drive enclosure that will connect to this hard drive!
Please, if anyone knows what type of connector that hard drive uses and where I can find an enclosure that will work with the hard drive, please let me know. Bonus points for a link to a cheap one that will work.
This question was solved.
View Solution.

Hi,
I don't have a DV6700, but on the DV9930US that I have, the connector attaches to the SATA connector of my drives. The other end, with the metal blades, drops down into a connector that is in the laptop, then a screw (there's only one on my laptop for each drive) goes through the hole in the adapter to hold the drive down. Assuming that there are screws holding the drive in the laptop (or maybe none), unscrew them, then there should be a clear mylar tab on the caddy that you can use to pull the drop "up", which wll bring the drive plus the adapter out. Then, simply pull the adapter out from the SATA connector on the drive, and remove the screws holding the drive in the thin aluminum "caddy". You should then be able to insert the bare drive into any USB SATA enclosure.
Jim

I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. be

I did made a copy of all my CC programms. for using on my other workstation. now is the CC desktop app not syncing the programme information. it do not see or sync the installed programms properly. what can i do. i do not want to download the hols set. because of a slow connection

If you are getting emails from these forums then you probably accidentally clicked on one of the links on the forums page where all the questions are listed e.g. at the top right of each forum's page there is text box with Actions and Notifications in :
So far you've posted in the iTunes Store forum :
https://discussions.apple.com/community/itunes/itunes_store#/
And the Using iPad forum :
https://discussions.apple.com/community/ipad/using_ipad#/
If on either of those forums that box says 'stop email notifications' instead of 'receive' then click on it and it should stop that forum sending emails to you.
There are full instructions on this page for stopping emails, as there are other places where they might have been set 'on' : https://discussions.apple.com/docs/DOC-3661
This is your original post for iTunes Match : https://discussions.apple.com/message/22647293#22647293
And this page lists your posts (you can click on each post on it to be taken to it's thread) : https://discussions.apple.com/people/suzettemg?view=overview

Faulty/stuck power button again! Who was the genius that located the ear-jack hole with the "Liquid Contact Indicator" at the top of the iPhone, so perspiration can accumulate and void the warranty

My Power button is stuck again...... like many, many other owners....like two of my previous iPhones. According to the Genius at the Genius Bar in Reno, Nv., my warranty is void because the LCI which is located in the ear-jack hole on the top, has come in contact with moisture/humidity/sweat. My iPhone has never been dropped or wet. My iPhone4s is in pristine conditon and is in great working order except for the "stuck" power button, but because of a poor quality and location of the ear-jack hole, my warranty has been voided. Everything I have is Apple. The Rep/Genius in Reno while fullly aware on the chronic power button problems, tried to put the stuck button on an exposure to moisture. He said, "It doesn't matter if mositure didn't cause the button to stick or not. Your warranty voided because of the Liquid Contact Indicated turned color. Of course, the "power/sync" hole LCI is perfect. Thank you Apple! I think I'll refuse my iPhone5 delivery on Friday and go buy a "Droid" phone.
Hey, who out there wants to buy my new iPhone5 when it gets to me on Friday???

Thanks for your reply. I too would not rule out moisture damaging the power button, but ...
I guess was being too subtle. My points are:
1. "Stuck" power buttons is a known issue/problem and Apple has been dealing with it since the first iPhone. This is quality problem. The evidence is with other users all around us and all over the web.
2. The "sweat" issue is a design problem and should've been addressed long before the release of the iPhone5 in a few days. Yes, they moved iPhone5's headphone-jack to the bottom/underneath of the iPhone. To say that the "sweat" issue is the users' fault is like saying, Apple iPhones should only be sold to swine or other mammals without sweat glands. We're talking about as little as one drop from someone's temple running down the headphone-jack opening while one is engadged with a phone call. That's all it takes to change the color of the LCI.
3. Also I wanted to make my complaint public on this forum and not Facebook, hoping to both, not only catch the eye of an Apple lurker, but let others know of the danger of speaking on their iPhones while out in the sun, high humidity or driving a car with the top down....... my point being, even the free AT&T Go Phones have protection against the slightest elements.
4. I paid close to $700 for this iPhone4s 64G less than a year ago. I don't like being dismissed with a cut and dry, cookie-cutter answer from a 20yr old without reasonable explanation and then be shoo'd out the door. "Next?"
5. I love Apple products and I'm glad the new release has addressed the jack/perspiration problem although I know there were other factors involved in the decisions to not move/move it.

MY HP 6700 printer says it is offline. How do we get it back?

From one day to the other, it appeared as "offline" though it´s connected, I have windows 8.1. I desinstalled and tried to install again but in the process the printer is not found. I have also installed the HP Print and Scan Doctor I printed the Network Configuration Page and there I see no errors, reseted the printer, connected to my wireless again, do not know what else to try Please I need assistance.
thanks

Welcome to the HP Community @Mayrus !
I read your post about how your Officejet 6700 is appearing as "offline". I hope to help you out with this issue!
I would first suggest following the steps in this guide. Normally assigning a static IP will help stabilize the connection to keep it from disconnecting.
HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Printer Series (H711) - Printer Does No...
Good luck, let me know what happens!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

1.burned a hole in my screen can I get this repaired? 2. Even though I have it set to open up to a blank screen, no web pages, my computer (safari) continuously opens with multiple safari sites open. It doesn't seem to matter what I do, it just reverts

1. I burned a small hole in my screen, is that fixable/replaceable? 2. Even though I have my 15" MacBook Pro set to open to empty screen when I open Safari, it constantly opens multiple previous pages. It doesn't seem to matter what I do it just reverts back to opening multiple pages. Major security risk, my bank pages have popped back up after my computer has been shut down, account numbers and all. I took my computer to an Apple store and the genious there tols me... "honey, you can't hold your laptop on your lap, that's the problem, it's getting too hot" he honestly said that. Could someone please help me? Thanks

Apple doesn't call its portable machines 'notebooks' instead of 'laptops' for nothing - using a MacBook Pro in your lap can cause some burns on your skin, poor ventilation, etc. So use it on a hard flat surface - not your lap, pillows, bedclothes, etc.
As for burning a hole in your screen, you'll have to revisit the Apple Store and see how much they would charge for a new screen. It's likely to be a bit expensive.
And if you've Safari set to re-open tabs when you restart, you can disable this feature -> Safari-Preferences-General.
Good luck,
Clinton

Okay so my i just got my new iphone 4 from sprint and sprint has the sim tray locked theres no hole on the side or anything and i was wondering if i took it to the apple store can i get it unlocked or another iphone with a open and close sim tray

sprint shouldnt have locked the sim tray anyways and i think this is just wrong because i payed for the phone and should be able to do what i want with it. they say you can unlock the sim card or the tray i guess if you in good standings with the company an apperantly im not so i was wondering if somthing can be done about this because i see no hole or anything to even open the tray someone HELP ME ! please and thank you

No. Nothing can be done about this. It was made clear quite some time ago what the situation was going to be.
Now... That said, if you have an iPhone 4S, there is a SIM tray on the right hand side of the phone.
If you have an iPhone 4 as you indicate, THERE IS NO SIM TRAY. The iPhone 4 is NOT a world Phone. You can only use that phone on Sprint or roam to their CDMA partners where present. The phone will not work at all throughout most of the world, including Europe.

MS Office secretly connects to my Mac and scans my activity. How??? Security hole? Exploitable by hackers?

I have a strange problem. All by itself it's not so serious, but it concerns me that it reveals a security hole which can be exploited by hackers.
I may be over-reacting, so any reassurance or explanation would be appreciated.
Here's the situation:
I have a MacBook Pro running OSX 10.6.5. I also have a new MacBook Air also running 10.6.5. I recently used Migration Assistant to move all my applications from the MacBook Pro to the MacBook Air. The migration worked fine with one very troubling exception.
One of the applications that got migrated was MS Office 2008 (MSWord, Excel, etc.). When I just had my MacBook Pro, MS Office worked fine. Also, now, if my MacBook Pro is turned off and I'm just using my Air, MS Office again works fine.
HOWEVER...if I have my MacBook Pro open and running MS Office on it, and then I simultaneously open my Air and try to launch MS Office, I get an error message that says
"Microsoft Office 2008 for Mac cannot start because Microsoft Office is already in use.
An office program is being used by Apple Mac. Your installation exceeds the number of installations permitted by the license agreement."
However, if I then "Quit" MS Office on the Pro, and then try to launch it on the Air, I don't get the error message, and it works as normal. The same thing happens if I switch computers -- if it's running on the Air first, then I can't launch it on the Pro. Basically, only one of the computers can run MS Office at any one time.
Now, the issue about the MS license agreement is not what concerns me -- I guess the version of MS Office I bought back in 2008 was only supposed to be installed on one single computer, and never migrated to a new computer (I eventually plan to use the Air full time and retire the Pro). I'm probably going to get a newer version of MS Office eventually anyway, and also I almost never use both computers at the same time, so I'm not worried about being unable to use MS Office on both computes simultaneously. No, what worries me is this:
How does MS Office on one computer even know that my other computer is running and has MS Office open?
I'm not an expert on networks and sharing and connectivity and all that, so excuse me if I use inaccurate terminology, but...:
Both computers connect via AirPort to a cable modem and thus share the same wifi hotspot to connect to the internet.
But as far as I can tell, the two computers are not "connected" to each other. In the System Preferences for both computers, in the "Sharing" panel, all File Sharing is off. Also, none of the sharing boxes are checked.
Neither computer shows the hard drive of the other on its Desktop. If I wanted to, I could use Finder's "Go" menu, choose "Connect to server," then "Browse," then find the other computer, double-click on it, type in the admin password, and then connect the two computers. But I haven't done that, and MS Office is able to see what the other comoputer is doing, even when they aren't connected in any way (as far as I can tell).
I find this pretty disturbing. How in the world does the MS Office on one computer even know that the other computer exists? Furthermore, how does it know that the other computer is on and running? And lastly and more importantly, how does it know which programs are running on the other computer?
One extra detail: in order to try to diagnose this odd behavior, I installed a program called "Little Snitch" which monitors all network activity and notifies the user whenever any malware programs or other sneaky behind-the-scens apps try to send data over your connection without your knowledge. Little Snitch seems to work great but when I test the problem after installing it, Little Snitch did not even detect or report that MS Office was doing any surreptitious network snooping. So whatever MS Office is doing, it's doing it pretty sneakily.
Here is my worry: Could a hacker somehow exploit this capability of MS Office to monitor activity on my computer without my being aware of it? Or could someone re-adapt this snooping code from MS Office for more nefarious purposes?
Or am I completely misapprehending the situation somehow?
Any reassurance or explanation would be greatly appreciated! Thanks.

But my question is: How does the software do that?
It scans the local network for computers trying to "share" software that is only supposed to be licensed for one computer. I can't give you a technical answer, I can just tell you that's what it's doing.
then what's preventing less ethical coders from deploying similar but more sinister malware with the same capability?
Nothing. Any vendor of any software, from a one person shareware or freeware app to a company the size of Apple, Microsoft or Adobe could sneak in damaging code. Any company that wants to stay in business though would never allow it.
In a typical software company (particularly larger ones), you have not only the people who write the code, but also system analysts who review the code looking for flaws or anything else that shouldn't be there.
Now I have the fear that if I'm using a wifi hotspot in a cafe or wherever, someone else with hacking skills on that same hotspot could basically see what I'm doing on my computer, without my knowledge.
The software to pry (they hope undetected) into other folks' computers on an open network like that has been around for years. That's why you at least need to have your firewall enabled when using a wifi hotspot.

How do I create holes through multiple layers?

I'd like to use boxes to punch holes into the layered artwork below them. I want the result to look exactly like this image, but with the white boxes being transparent holes.
This seems so simple, but I can't find any combination of layers/pathfinder tools/compound shapes/or clipping masks that will produce this result. No matter what, I end up losing part of the artwork (usually the topo lines and the black bar).
What am I missing??
Thanks in advance for any advice.

mirvlem,
You may:
1) Select the boxes to become holes and Object>Group (if nort already);
2) Select everything and in the Transparence palette flyout tick Make Opacity Mask with Clip unticked and Invert mask ticked.
There seems to be no need for multiple layers, but the Opacity mask punches through them all right.

How can I print only in black on my HP 6700 from my I Phone 5?

How can I print only in black on my HP 6700 from my I Phone 5?

Hi picheny. How are you printing from your iPhone. Are you using Apple's built in Airprint or the HP Eprint app? Airprint doesn't seem to have any such option. With Eprint, you can specify.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How can I print to Officejet 6700 from Win XP x64 computer?

Purchased the 6700 and conencted to network and prints from Win 7 laptops fine.
My desktop workstation in HP Z600 running Win XP X64, but cannot seem to get a driver to suit to print over the network.
I would prefer not to have to trash and replace the OS on the workstation!
Is there a work-around or some sort of interface that I could use?
My home network does have a little HP server, but it runs Win Server 2003, which is also incapable to connecting to the printer.
This question was solved.
View Solution.

Hello GeorgeCurran,
Please follow the below steps that should atleast get you printing ..
Click START > Control Panel > Printers and Faxes , then
Add a Printer > Add a local printer > Select "Create a New Port" > type in the Printer's IP address Click NEXT,
in the Manufacturing list , select HP / Hewlett packard, and from the right pane , select Deskjet 990c and complete the wizard .
Now try printing, it should work.
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Hola, altavoces 6700 (6

Similar Messages

Maybe you are looking for