Hold on order line is visible as an order header hold in order organizer

Hi,
When we create a hold on a sales order line, then we can see in the order organizer at order header level that the order is on hold (with the check box).
We don't want this because then it looks like the complete order is on hold.
We only want to see at the line level that the line is on hold for the specific lines that have a hold.
Is there any way that we can avoid that an order line hold is visible as an hold in the order organizer at order header level ?
Regards,
Jan

Standard functionality, I'm afraid. What that tick box is currently telling you is 'This order is on hold at header level OR one or more lines within the order are on hold'. What you're looking for is two hold statuses: 1) order header is on hold 2) one or more lines are on hold ... which you won't get without customizing the form.
If it's really important to access more granular hold info without opening the order (though unfortunately not 'at a glance' and at the cost of a couple of extra clicks), you could always add a personalization message displayable for each row on the Organizer via the Actions menu and where the only limitation on content is your creative skills ;-)

Similar Messages

Pdf stitch lines, now visible in channels

Hello.
Having recently updated to Creative Cloud, I've notice that the pdf stitch lines scenario has changed somewhat.
I am aware that, for many years now, when exporting a pdf (Acrobat 4 PDF 1.3) any transparency layers within the artwork result in very thin white lines being visible on the file.
I had sent thousands of artwork out to press in that way, and was confident that the lines would not print.
One of the ways I would put clients minds at ease though would be to rasterize the file into Photoshop, save as a jpg and hey~presto, said lines are all gone.
Now, (since CC update) if I rasterise a pdf, the lines do show! They're there in the channels, ok albeit very faintly, but they are there.
If I flatten, and save as a jpg, they're visible.
Has anyone else noticed this since the CC update? I'm still new to it, so I'm sure some of you have.
Just hoping someone can put my mind at ease, and say they're ok and still will not print.
Below is the cyan channel, rasetrized in Photoshop
Iam using InDesign CC, on a mac 10.9.1

No, I don't think so. There is a export to pdf section. Which I use most of the time.
I also tried to export a postcript file, and then the pdf version 1.3 can be selected in Distiller after. Unfortunatley this produces the same result.
Since asking this question on here, I have posed the same query to a few of the printers that I use. They are quite sure the lines won't print when they output from the pdf.
The thing is I can't print from a pdf properly on our desktop printer here, hence why I rasterize to output proofs. I'm thinking this is where my problem stems from, something to do with how Photoshop recognizes the flattened pdf file.
Thanks for your replies Phillip.

DEFAULT_WHERE in the Order Organizer form

Hello,
I 'm trying to restrict the search results in the Order Organizer form to a specific set of sites using Forms Personalization, and by setting the DEFAULT_WHERE property for the block ORDERS_SUMMARY.
The following is how I have setup for the Personalization:
Condition -> Event = WHEN-NEW-FORM-INSTANCE; Processing Mode = Both (Query & Non-Query modes)
Actions -> Type = Property; Language = All; Object Type= Block; Target Object =ORDERS_SUMMARY; Value = 'ORDERS_SUMMARY.SHIP_TO_ORG_ID IN (SELECT SITE_USE_ID FROM HZ_CUST_SITE_USES_ALL WHERE WAREHOUSE_ID IS NOT NULL'
I have tried the 'Validate' button for any syntactical errors, and no such errors. However, when I launch the form and enter a search criteria the results are NOT getting restricted as per the DEFAULT_WHERE I supplied.
Please assist.
Thanks,
Seshu

Hello,
I 'm trying to restrict the search results in the Order Organizer form to a specific set of sites using Forms Personalization, and by setting the DEFAULT_WHERE property for the block ORDERS_SUMMARY.
The following is how I have setup for the Personalization:
Condition -> Event = WHEN-NEW-FORM-INSTANCE; Processing Mode = Both (Query & Non-Query modes)
Actions -> Type = Property; Language = All; Object Type= Block; Target Object =ORDERS_SUMMARY; Value = 'ORDERS_SUMMARY.SHIP_TO_ORG_ID IN (SELECT SITE_USE_ID FROM HZ_CUST_SITE_USES_ALL WHERE WAREHOUSE_ID IS NOT NULL'
I have tried the 'Validate' button for any syntactical errors, and no such errors. However, when I launch the form and enter a search criteria the results are NOT getting restricted as per the DEFAULT_WHERE I supplied.
Please assist.
Thanks,
Seshu

Need to hard code field with F11 in Order Organizer

When querying (F11-ing) in Order Organizer, we need to have the Order Type field defaulting to a value so that users cannot select any other value.
The reason is different orgs under the same OU have different Order Types & a user specific to an Inv Org would be forced to query only with the Order Type when F11-ing in Order Organizer.
This requirement is only when querying because when entering a Sales Order, the correct Order Type defaults from a defaulting rule.
Thanks in advance,
Sanjib.

Actually i have given the Mandatory fields as input. So when I test the process in the EM Console i need to fill the mandatory fields. Once i fill the mandatory fields and Test the Service i will invoke a WSDL file that will close the Tasks in the BPM Worklist. If I dont give the mandatory fields it will throw a error. Now what I need is that I Dont want to enter the values for some mandatory fields, instead i need to pass it as a hardcoded value. So that i need not to type the values of that fields during testing.

Order Organizer - Actions - Restocking Fee

I am using R12.0.6.
In order organizer I have a user who is missing the option to add a restock fee to an RMA. Where does one enable/disable the ability to see and apply a restock fee?

I don't think so as they're functions which you can control at responsibility level via exclusions or menu but not TTBOMK within the form.
However, if all you want to do is to prevent users from copying particular order types you could use a forms personalization workaround. Not 100% ideal but it does the job (it works by removing the 'OK' button from the copy window and showing a message that the function is not available).
You'll need 2 x persos, one to remove the ok button and display the message for certain order types and the other to put back the OK button for all other order types.
Perso1:
Event = WHEN-NEW-ITEM-INSTANCE
Obj = COPY.CREATE_ORDER
Condition = :ORDERS_SUMMARY.ORDER_TYPE IN ( ... put your order type exclusions here ... )
Action Seq = 10
Action Type = Message
Message Type = Warn
Message Text = This action is not available for this order type
Action Seq = 20
Action Type = Property
Object Type = Item
Target Object = COPY.OK_BUTTON
Property Name = DISPLAYED (APPLICATIONS COVER)
Value = FALSE
Perso2:
Event = WHEN-NEW-ITEM-INSTANCE
Obj = COPY.CREATE_ORDER
Condition = :ORDERS_SUMMARY.ORDER_TYPE NOT IN ( ... put your order type exclusions here ... )
Action Seq = 10
Action Type = Property
Object Type = Item
Target Object = COPY.OK_BUTTON
Property Name = DISPLAYED (APPLICATIONS COVER)
Value = TRUE

How can I draw a line in Preview without the arrow head

Hello all!
How can I draw a line in Preview without the arrow head at the end of the line?

Yes. Once you select the line bar a new entry will appear where you can select what type of line. Based on my experience whether or not it will change is iffy.

3d line graph: Line not visible

How come the line is only visible when the user click on the 3D graph?
The attached VI load some data into the 3D graph but it's not visible.
When the user click on the 3D graph, the line shows up
From the moment the mouse button is released the line disappears
What am I doing wrong??
Thanks for your reaction!
I'm using LV 8.6
Attachments:
Trial-3DLine-002.vi ‏39 KB

Who programmed the CW 3D graph control???
Since the Caption & Label properties didn’t act as expected, I connect a control to each of them to play with.
This is what I found out:
Caption color: doesn’t influence the graph at all
Caption Opposite visible: Ok
Caption visible: Ok
Caption font size: doesn’t influence the graph at all
Caption text: Ok
Grid color: doesn’t influence the graph at all
Grid visible: Ok
Label Color: doesn’t influence the graph at all
Label Opposite Visible: Ok
Label Visible: Ok
Label Font size: The size of the Caption is changed !!!!
Tick Color: Ok
Major Tick visible: Ok
Minor tick visible: Ok
Major tick count: Ok
Minor tick count: Ok
Range Autoscale: Ok
Range maximum: Ok
Range minimum: Ok
I’m sorry but did I pay for that ?? ??
Attachments:
Trial-3DLine-004.vi ‏48 KB

Navbar - line still visible

Many have recommended adding your own nav bar in Iweb to make it more spiderable.
But, when I go to insp and deselect it,and add my own nav bar, the line that was under the original nav bar is still there. (see insideoutprofiling.com homepage). how do you get this line off? It seems to have been part of the template for the nav bar.
Also, the Rage SEO tool that is often recommended - is that the Rage Google sitemap automater? If not - can you give me a direct link to it please!? Thank you. You guys are being so great and helpful!!

Some of the themes do have default images and the line is most likely that. I couldn't remove it from my pages either so just made it part of the design, even adding a new line at one end to make it look like it was centered on the page. This appears to apply to only certain themes.
And I think I'm correct to say that this delineates the Header (above the line) from the content. Menu:View: show layout ... will show the area boundaries.
You could move your own Navigation bar above this line into the header itself:
Multiple select your links and hold the command key down as you drag them up above this line, into the header.
Then draw a thicker line and place it on the theme's line: you can't place it 'on top' to hide it, but if you use the right colour you could camouflage it to match the texture of your other lines.
You can also increase the top/bottom padding (in the page inspector, layout tab)
Hope this helps
Elizabeth

FBL3N - line item visible both as open item and as cleared item

Hello,
Please can you tell me possible reasons for which I see the same line item in FBL3N as an open item when I check "open items" and as cleared when I check for "cleared items".
Thank you !
Daniel N.

There is a small correction:
It is not partial it is residual.
In case of partial your original document will be intact - Open items will show debit, credit and the balance.
In case of residual, your original amount will be deducted and a new entry gets posted as if there is a new transaction. For example from 100 USD if 40 USD has been cleared, then two line items will be shown in 40 as cleared items and a new line 60 will be generated in open items 60. But, this 60 will have different document number.
I think there is some issue the way in which selection criteria has been selected.
Please do not see the open items at a key date. Because that date it might be open item, later at a stage it might have become a cleared item.
Do not restrict any dates and see the total items (cleared items and open items) and let me know if the same document is showing as cleared as well as open. This is more unlikely and I have not seen.
Regards,
Ravi

Still images in time line not visible

hello does anyone know how to correct the timeline in elements 4 to make visible the thumbnails of still images. thx joan

I think you should first understand security concepts of the content repository described here: http://docs.oracle.com/cd/E23943_01/doc.1111/e10792/c05_security.htm#CDDECAAF
Depending if you use just Security Groups, or Access Control Lists (ACLs) you need to configure the system. Also, keep in mind that spaces usually utilize folders and metadata inheritance - for further details see http://docs.oracle.com/cd/E23943_01/doc.1111/e10978/c08_folders.htm#i1125681

Sound time line not visible while editing.

Hi all,
I'm trying to edit a wedding AVI file that was ripped from a DVD. The ripping was done through ImTOO DVD Ripper Platinum 5, and the video played well with sound. Then I decided to import the video into Premiere to do some editing. After the video is imported, I dragged the file from the library onto the video time line. Normally when we do this in Premiere, corresponding sound time line will automatically appears below the video timeline. But it didn't happen for this file. Finally, when I play the file in Premiere CS3 Pro, no sound can be heard. Can someone help me solve this problem? Thank you!

> Maybe he got divorced and he wants to cut all shots of the bride out (or paint a mustache on her)
Rotoscoping may be the solution in that case. But that leaves the question of why invest so much time to achieve that? The result may be that optically he married a nobody or a mustached person and who would want to advertise that?

Opacity and render line not visible

I am currently using premiere cc and my sequences are not showing the yellow render line or opacity filter, it is only showing the FX indicator. How do I get it to display the yellow line and opacity?? I am trying to fade in and fade out with the markers like I was able to in CS6. I've searched but can't find much.
Thanks
David

Dear
For Detail Study about XML ,
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/ee639033-0801-0010-0883-b2c76b18583a&overridelayout=true
Regards
Tushar Dave

Lines not visible when at 100%

User is creating a financial statement, subheaders should be underlined, totals should be double underlined. When viewing at 100%, subheaders show no underline, totals show single underline. when viewing at 125% everything is as it should be. problem being this is only affecting one page out of a 35 page report, report was generated from one document. Windows 7 pro, 64 bit, Office 2013, Adobe Standard XI

Document was created from Word and Excel. Was using Adobe pro and Standard and get same issue. also tried changing quality to high quality and same result.

Rounded border in table but rectangle lines still visible

How can I show only the rounded outline of a table? I've selected rounded border, and that shows up, but so does the rectangle of the table shape. Is there a way to get rid of that so that only the rounded border shows? The rounded border works perfectly for a text box.

For each corner cell in the table set the border edges to 'None'.

How to drive sales order Organizational Unit to equal the Sales Office

CRM 7.0, sales order is using org rule ORGMAN_23 which has FM CRM_ORGMAN_ORGOBJECTS_FIND_11
The sales order finds the sales org, dist channel, division, sales office, and sales group but the Organizational Unit always matches the sales group.
Will any of the delivered FM's used in PFAC
CRM_ORGMAN_ORGOBJECTS_FIND_1
CRM_ORGMAN_ORGOBJECTS_FIND_2
CRM_ORGMAN_ORGOBJECTS_FIND_3 ......
return the results I desire? or will we need to copy and modify one of these FM's.

Hello,
You need to adjust your org structure in ppoma_crm.
Currently the org unit which is mapped to an ECC sales group holds the attributes that mapped to the BP's sales area data.
(If you are using rule ORGMAN_23).
Please create an org unit, which is not mapped to the sales group, with the desired attributes, then assign the BP to this org unit.
Best regards,
Maggie

Hold on order line is visible as an order header hold in order organizer

Similar Messages

Maybe you are looking for