Homgeneous System Copy with Java and DB2 with database tools.

Hello,
we have an single java stack (netweaver 2004s) and tried a system copy with database tools.
Source System: DP2, dp2adm, db2dp2, sapdp2db
Target System: SP2, sp2adm, db2sp2, ???
We followed the documentation "System copy for SAP systems based on sap netweaver 2004s SR1 JAVA. We exported the SDM on the source system made a redirected restore with db tools and tried to install a new target system.
During the import in the target system using sapinst we get in the
phase run java migration tool kit the following error message.
Caused by:
com.sap.engine.frame.core.configuration.ConfigurationException: Error
while connecting to DB.
at
com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.(ConfigurationManagerBootstrapImpl.java:49)
... 14 more
Caused by: com.ibm.db2.jcc.a.SqlException: Connection authorization
failure occurred. Reason: userid revoked.
What I didn't understand is, that in the documenation it is mentioned, that you have to use the same java database connect user. But during the installation of the target system (SP2) I cannot change the java database connect user to sapdp2db. I'm only allow to enter sapsp2db. That might then cause the connection problem.
Regards
Alexander Türk
I

Hi Alexander
yes , give it a try , but see note
970518 Hom./Het.System Copy SAP NetWeaver 2004s SR2
and all other related notes , if it matches your environment .
Best regards
dirk

Similar Messages

Problem with Java and safari with 10.6.8

Everytime I try to load a game from Pogo.com the window that actually loads the Java, closes before the actual game can be loaded. Safari isn't crashing.... Its just closing the window. There's no error report or anything. Any ideas?
Java is enabled. Data has been cleared in Java preferences.

I just got off phone with AppleCare about same issue. Here is how to fix:
How to reinstall Java for 10.6.8:
- Go to: /System/Library/Java/Support/CoreDeploy.bundle/Contents
- Move: javaAppletPlugin.plugin to the trash
- Run update --- Found at: http://support.apple.com/kb/DL1573
- Reset safari
- Empty cache

The performance of management system with Java and MySQL

Hi all,
I want to develop one management application with Java and MySQL. However I am not sure which is a good way to design the system. The system has to deal with customers' data in the database.
Should I create objects for every customers when application starts so that I do not need to access to the database often? Or
Should I access to the database everytime the user want to deal with customer's data?
Welcome for any suggestion.
Thank you
Pat

Hi
i i think u should go through MVC model or use connection pooling

Problem with java and pogo games

i use mozilla and now with the problems with java and hackers cannot play my pogo games,what can i do? i disabled my java i tried java 6 doesnt work or is not safe,what is a safe way to play games on pogo that use java?

Oracle has released a Java 7 Update 11 to address security vulnerabilities and you should update to that version.
*https://support.mozilla.org/kb/how-to-use-java-if-its-been-blocked
See also:
*http://kb.mozillazine.org/Java#Windows_installation_issues
You can find the latest Java version on the Oracle website.
See Java Platform > Java SE 7U11 and Java 6U38 (Download JRE)
*http://www.oracle.com/technetwork/java/javase/downloads/index.html

Events problem with (Java and ActiveX)

Hi,
I use an ActiveX component with Java and i've got a problem with events.
Java classes were generated with Bridge2Java (IBM).
In order to manage events I added a listener in my application :
javaMyActiveX = new MyActiveX();
javaMyActiveX.add_DMyActiveXEventsListener(new _DMyActiveXEventsAdapter());
I also added a constructor in the _DMyActiveXEventsAdapter class and I fill the body of methods.
The ActiveX generates two types of events :
- The ones are directly generated by methods.
- The others are generated by a thread.
With MS Products (VB, Visual C++, Visual J++), I catch all events.
With java (jdk 1.4), I catch only events generated by methods.
Can anyone help me.

I'm not 100% sure, but the last time I used that bridge, it only worked if you ran your Java app within a Microsoft VM.

2 Instances in Configtool and offlinecfgeditor after System Copy ABAP+Java

Hello,
I've done a system copy ABAP+JAVA of a XI3.0 (WAS 6.40) and after the system copy I've my system up & running.
The problem is:
After I have finished the System Copy (Export and Import) of the ABAP and Java part I'm doing the pre-steps for the Upgrade to PI 7.1.
Ok, following the note 1061649 on the point "Checking the Consistency Between Primary Application Server Instance ID and Box Number" when I check this point I'm in trouble because my Java ID (the same Java ID of the source system of the system copy) isn't the JAVA ID that the checks waits for my destination server.
The result of the check is:
java -cp instanceidcheck.jar com.sap.sdt.check.InstanceIdChecker ID84971 21 XIDDVEBMGS21sapxid
The calculated instance ID is ID2190439
WARNING!!! The source system ID that you provided (ID84971) is different than the one calculated (ID2190439)
You will have problems installing the shadow system and running the migration.
Then, I go to see in configtool my InstanceID and I see that I have 2 InstanceID's....the instanceID ID2190439 that is empty (no dispatcher and no server0) and the instanceID ID84971 that has dispatcher, server0 and is the instance which is starting when I type "startsap sapxid".
Can you tell me why is happening that ??
Regards,
Albert

Hello,
I've done a system copy ABAP+JAVA of a XI3.0 (WAS 6.40) and after the system copy I've my system up & running.
The problem is:
After I have finished the System Copy (Export and Import) of the ABAP and Java part I'm doing the pre-steps for the Upgrade to PI 7.1.
Ok, following the note 1061649 on the point "Checking the Consistency Between Primary Application Server Instance ID and Box Number" when I check this point I'm in trouble because my Java ID (the same Java ID of the source system of the system copy) isn't the JAVA ID that the checks waits for my destination server.
The result of the check is:
java -cp instanceidcheck.jar com.sap.sdt.check.InstanceIdChecker ID84971 21 XIDDVEBMGS21sapxid
The calculated instance ID is ID2190439
WARNING!!! The source system ID that you provided (ID84971) is different than the one calculated (ID2190439)
You will have problems installing the shadow system and running the migration.
Then, I go to see in configtool my InstanceID and I see that I have 2 InstanceID's....the instanceID ID2190439 that is empty (no dispatcher and no server0) and the instanceID ID84971 that has dispatcher, server0 and is the instance which is starting when I type "startsap sapxid".
Can you tell me why is happening that ??
Regards,
Albert

Discussion Forum Portlet - Problems with JAVA and UTF8?

Hi
I installed the Discussion Forum Portlet successfully. It also seems that almost everything works fine. There's only a problem if I have new posts that include special German characters (Umlaute) like ä, ö, ü or special French characters like é, è or ç. They are saved correctly in the table but if you view the post the characters are not displayed correctly.
Example
input: ça va?
result: Ã§a va?
I know that there are problems with Java and UTF8 Database. Is there a possibility to change this (bug)?
Regards
Mark

Here's what I got. I don't see anything that helps but I'm kinda new to using SQL and java together.
D:\javatemp\viddb>java videodb
Problem with SQL java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver
] Syntax error in CREATE TABLE statement.
Driver Error Number-3551
java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in
CREATE TABLE statement.
at sun.jdbc.odbc.JdbcOdbc.createSQLException(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.standardError(Unknown Source)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(Unknown Source)
at sun.jdbc.odbc.JdbcOdbcStatement.executeUpdate(Unknown Source)
at videodb.main(videodb.java:31)
D:\javatemp\viddb>

3 tiers model with Java and Oracle.

Hi everybody. I have a problem with my work. I want to design a simple program follow 3 tiers model with Java and database is Oracle. But I do not know how I can design them. Please help me. It will better if you give some source code for each layer.
Thanks in advance.
Ky Thanh.

I'd suggest searching the net for tutorials. Pick out the things you don't know about and need to know (SQL? JDBC? Java? software design in general?) and google: tier architecture, sql tutorial, etc. Sun's Java & JDBC tutorials are at http://java.sun.com/learning/tutorial/index.html
Source for each tier? Read the JDBC tutorial and you can write the database tier source yourself. Learn Swing/Servlets/whatever you use for the user interface and you can write the top tier. The middle tier is your business logic, which is dependent on your area of business, and you'll need to know about the business and just general programming. Then if the tiers need to be distributed (hopefully not), you'll need to learn EJB or something.
I hope you haven't been given a task there you aren't ready to take on... Learning to swim by jumping into the river is a great way to learn in a school assignment, but you mention work, and learning that way at work sounds a bit risky to me.

Homogenous System Copy WAS 6.20 DB2 8

Hi all.
I am planning to do a Homogenous system copy of our PRD system to the QAS system. Both have SAP R3 4.70 Core with WebAS 620 and DB2 version 8.
I am reading both guides 6.20 and 6.30 and it is not clear if with WebAs 620 and version 8 if I can use the database relocation method or the backup method. It says that u need DB2 8 but not sure if 620 o 630. Could someone clear this doubt.
I know that the R3Load method is possible but if the backup method or the relocation method is possible I would like to use this since this backups the whole DB and the r3load doesn't.

Here is the link to the thread
Homogenous System Copy WAS 6.20 DB2 8
Bye.

System copy : As Java : Non-unicode kernel Option not available

Dear All,
we are performing AS Java system copy to create a new system , same SID , same HOST and same Configuration except OS is upgraded.
Susle Linux OS - 11 SP3
As Java Nw 701
kernel version -
NW701 - Kernel 721_Ext - Non_unicode - 201 patch level
We have successfully completed export and now we are importing the same export in new server,now while performing taget installation we are not getting option to install NON UNICODE kernel , except it is only asking for UC Kernel 7.20/7.21.
Current version of system is non-unicode and we will like to keep it that way.
May I know is non-unicode system copy option is not available? is it removed ?
and if we want to install non-unicode then how we can perform that ?
Can we install target system using UC kernel and later just perform NON-unicode kernel upgrade, will this work?
Has anyone faced such concern?
Guidance will be appreciated.
Regards,
Bond

Thanks for update RB.
We have tried this method as in we stop SAP and sync file systems and perform DB/Backup restore method. This method works but unfortunately I am not able to find any SAP relevant document to support this method for so called "java" systems.
SAP only suggest to perform system copy for "java" hence we are trying via export import. Currently I am looking into options of using old master installation software.
although, can i request you if you any SAP relevant note or kba or any other in which SAP support/suggest we can perform file system copy and db restore for "Java" systems then it will be just a thing which I need to go ahead with method you suggested.
Thanks , kindly update.
Warm Regards,

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flashplayer. With the Reader, I was able to find a different install

Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"?? It happened with Reader and now with Flash player. With the Reader, I was able to find a different installation link using the troubleshooting guide. I cannot find the same with flash player. Please tell me how to install Flash player because there is a website that I cannot even view without it. BTW That is annoying that I cannot even see the website without flash player
my system is XP

Use these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Flash Player for Mac OS X
For Adobe Reader go to http://get.adobe.com/reader/enterprise/

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

How to create a transport request with query and only with its structure.

HI guru,
how to create a transport request with query and only with its structure.transport request should not include any other query items like ( variables, conditions...etc)
thanks in advance.
venkata

Hi,
Goto RSA1 and then Transport Connection -> In SAP Transports select Object Types-> Query Elements -> Then select Query->Give Technical name of the query and then select for transfer. In the right side you can choose the components which you wanted to transport.
Regards,
anil

Matrix with CFL and RecordSet with DoQuery

Hello Experts,
How to use Matrix with CFL and RecordSet with DoQuery

Hi Manish,
Refer to SDK sample on CFL at ...\SAP\SAP Business One SDK\Samples\COM UI\VB.NET\17.ChooseFromList
Go to SDK Help, Developer's Guide -> DI DPI -> Reference -> Overview -> Objects -> Recordset
see the Example "Recordset Operations sample" at the bottom of the page
HTH
Aravind

Homgeneous System Copy with Java and DB2 with database tools.

Similar Messages

Maybe you are looking for