Host name benig remove from relative link on some users computers IE 7 or IE8

There are PDF docs stored on a server with and IP as the top level of the URL. i.e https://123.123.12/....
The problem is on certain computer the IP is not displaying when you point on the link and there for the PDF will not display.
Some computer teh path will be correct https://123.123.12/fld1/help/pdf_file.pdf. Computers/users that can't open the link are seeing the link as https:///fld1/help/pdf_file.pdf
Why is the host name being removed from the link on some computers?

Similar Messages

Fetch host name and url from the payload

Hi,
I want to configure my HTTP reciever channel, but i need the details to be fetched from payload.
The details are like Target Host ,URL etc.
Any help is appreciated.
Regards,
Bhanu.

Hello
I want to configure my HTTP reciever channel, but i need the details to be fetched from payload.
Since your URL is dynamic and there is a chance that the protocol is https, it is better to use SOAP Receiver Adapter instead.
Make sure that you check Do not use SOAP Envelope to make it behave like a Plain HTTP Receiver.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/29/5bd93f130f9215e10000000a155106/frameset.htm
From the link, URL is TServerLocation, etc... Use dynamic configuration via UDF to fulfill your requirements.
Hope this helps,
Mark

Make can't recursively call Make when run from Runtime.exec (for some user)

This one is a little complicated. The afflicted platform is Mac OS X. It works fine on Linux, it seems, and even then, it does work for some Mac OS X users...
First, the setup. I have a Java program that has to call GNU Make. Then, GNU Make will recursively call Make in some subdirectories. This results in the following Java code:
String make = "make"; //on windows, I have this swapped with "mingw32-make"
String workDir = ...; //this is programmatically detected to be the same folder that the parent Makefile is in
Runtime.getRuntime().exec(make,null,workDir);This calls make on a Makefile which has the following line early on to be executed (this is only a snippet from the makefile):
cd subdirectory && $(MAKE)When I fetch the output from the make command, I usually get what I expect: It cd's to the directory and it recursively calls make and everything goes smoothly.
However, for one particular user, using Mac OS X, he has reported the following output:
cd subdirectory && make
/bin/sh: make: command not found
make: *** [PROJNAME] Error 127Which is like, kinda hurts my head... make can't find make, apparently.
I've gotten some suggestions that it might be due to the "cd" command acting wonky. I've gotten other suggestions that it may be some strange setup with the env variables (My Mac developer is implementing a fix/workaround for 'environ', which is apparently posix standard, but Mac (Mr. Posix Compliance...) doesn't implement it. When he finishes that, I'll know whether it worked or not, but I get the feeling it won't fix this problem, since it's intended for another area of code entirely...
Also worth mentioning, when the user calls "make" from the terminal in said directory, it recurses fine, getting past that particular line. (Later on down the road he hits errors with environ, which is what my aforementioned Mac dev is working on). Although calling "make" by hand is not an ideal solution here.
Anyways, I'm looking for someone who's fairly knowledgeable with Runtime.exec() to suggest some way to work around this, or at least to find out that perhaps one of the User's settings are wonked up and they can just fix it and have this working... that'd be great too.
-IsmAvatar

YoungWinston
YoungWinston wrote:
IsmAvatar wrote:
However, for one particular user, using Mac OS X, he has reported the following output:One particular user, or all users on Mac OS?In this case, I have two mac users. One is reporting that all works fine. The other is reporting this problem.
cd subdirectory && make
/bin/sh: make: command not found
make: *** [PROJNAME] Error 127Which is like, kinda hurts my head... make can't find make, apparently.If that is being reported on the command line, then I'd say that make wasn't being found at all.If make isn't being found, then who's interpreting the Makefile?
It's also just possible that the make script on Mac isn't correctly exporting its PATH variable, though it seems unlikely, since this would surely have been reported as a bug long ago.
I've gotten some suggestions that it might be due to the "cd" command acting wonky...Also seems unlikely. 'cd' has been around since shortly after the K-T extinction event.
WinstonBy "acting wonky", I mean being given a bad work directory or some such, such that it's not changing to the intended directory.
Andrew Thompson
Andrew Thompson wrote:
(shudder) Read and implement all the recommendations of "When Runtime.exec() won't" (http://www.javaworld.com/jw-12-2000/jw-1229-traps.html).
Already read it. I already know the dreadful wonders of Runtime.exec. But in this case, it's been working fine for us up until one Mac user reported that make can't find make.
Also, why are you still coding for Java 1.4? If you are not, use a ProcessBuilder, which takes a small part of the pain out of dealing with processes.Usually I do use a ProcessBuilder. I noticed that it usually delegates to Runtime.exec() anyways, and seeing as I didn't need any of the additional functionality, I decided to just use Runtime.exec() in this particular case.
jschell
jschell wrote:
So print thos env vars, in your app and when the user does it.I'll look into that. It's a good start.
-IsmAvatar

Hey guys! Unfortunately I have lost a lot of the music I have previously downloaded from iTunes (because of some faulty computers) and I have no idea on how to get it back. Is there anything I can do??

Hey people! I have lost a lot of music I have bought from iTunes and I am really hoping there is something I can do to get it all back. Is there anything I can do?

See HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

How can i remove a user name or account from the ipad?

I purchased the iPad from a friend who never used it but entered a user name and profile. When I try to load something from eBooks, it automatically defaults to the other user name and not mine and I don't know how to change it to my user name (email address). How can I completely remove anything related to that other user name and info?

Attach your iPad to your iMac and then in iTunes on the Mac use iTunes > File > Devices > Transfer Purchases

Cannot remove related links

something strange is happening with my brand new SAP Portal 7.0 ESS MSS installation. When I add a related link to a portal page, I cannot remove the related link anymore (the "remove" button is disabled). Is this a bug?
Tiberiu

Hi,
check the authoriszations for copy/delete/remove for your role as a portal user. Might be some problem with the authorizations. Check with your system admin.
Regards
Lekha

Batch Remove from the Company Team

Hi,
Is it possible to remove people from the company Team in bulk.
I can add people in using an import, but cannot remove people from multiple records on mass. I have to remove them one by one in each company.
I want to be able to remove a specific person from all the company teams in all companies in a certain post code?
Thanks in advance for you advice.

Mass Remove Team Members [ID 727953.1]
Solution
ISSUE:
I want to mass remove Team Members from records without doing it one at a time.
SOLUTION #1:
If a company originally set up their account teams using a Public Sharing Group and selected the Default Group Assignment option in the Company Profile (Admin > Company Administration > Company Profile), then they can remove team members by removing the member from the Public Sharing Group and all records associated with the group will be updated automatically, removing the users you no longer want on the Account Team.
NOTE: If the company added team members without having created a Public Sharing Group, you will need to follow the steps in the second Solution below. You can tell if you have this scenario because there will be a Remove link next to each account team member's name in the related information section on the Account Record under "Account Team."
Here are the steps used in R15 (931.0.02) to remove account team members:
1. The Remove link appears on the Account record's related information "Account Team" section if the user is not added to the same Public Sharing Group (PSG) that is associated with the Account record. The first step is to determine which group is associated with the account(s). You can expose the Primary Group field on the layout, or create a list to determine this.
2. Once you have determined the PSG associated with the account(s), add the users with the Remove link by their names to this PSG by clicking Admin > User Management and Access Control > Public Sharing Groups and then click the link for the PSG you want to edit. Click the Add Members link and add the users to the group.
3. Go back to the Account record and verify that the users that you added to the Account Team related information section on the Account no longer have the Remove link. With large datasets, there can be a delay of 15 to 20 minutes before changes are updated. Once this is verified, go to step 4.
4. Click Admin > User Management and Access Control > Public Sharing Groups and select the group you want to edit. Click the Remove link to remove these users from the PSG.
5. Go back to the Account record and verify that the user has been removed. Once again, there can be a delay of about 15 to 30 minutes, depending on the amount of data that needs to be updated.
SOLUTION #2:
If a company has set Team Visibility and added team members without originally selecting the Default Group Assignment option on the company profile (Admin > Company Administration > Company Profile), and did not create a Public Sharing Group to which they added their team members, and then decides they want to mass remove all team members, you will need to follow the steps below. You can tell if this scenario exists because there will be a Remove link next to each team member on the Account record under the related information section for Account Team.
NOTE: If the company originally set up a Public Sharing Group and added the team members to that group and checked the option for Default Group Assignment, then you can use the first Solution above. You can tell if this scenario exists as there will be no Remove link next to the team members on the Account record under the related information section for Account Team.
Before you begin the steps below, make sure that the Default Group Assignment is now enabled in the Company Profile (Click the Admin Link > Company Administration> Company Profile > under the Company Data Visibility Settings section> select Default Group Assignment).
1. Create a dummy user in CRM On Demand.
2. Export the desired Account records into a .csv file.
3. In the .csv file change the owner of the Account records to the dummy user and save your changes. CAUTION: Make certain that you save the updated file under a new name so that the file with the original Account owner stays in tact.
4. Create a new Public Sharing Group and add all members that need to be deleted from the Account Team, including the dummy user you created. To do this go to Admin > User Management & Access Controls > Public Sharing Groups.
5. Perform the Account import to overwrite the current Account record owner with the dummy user. This will remove the Remove button in the Account Team for each user because the Account record is now associated with the new Public Sharing Group you just created.
6. Go to the new Public Sharing Group that you created and delete the users one by one. Do not delete the Public Sharing Group yet.
7. Go back to your export file that contains the original Account owner and re-import that file so that the original Account owner overwrites the dummy user, doing so will automatically remove from the Account Team the users that you deleted from the Public Sharing Group in Step 6.
8. Verify that the team members were removed from the Account records and then delete the new Public Sharing Group that you created. NOTE: This could take some time depending on how many records are involved.

Zombie Changes to Domain/Host Name in Mail Settings Window

For the second time since setting it up, the domain name has changed from "domain.com" to "local", and the host name has changed from "myserver.domain.com" to "myserver.local".
This tends to screw up my mail services.
I cannot determine why this would change, by itself, without any external intervention from anyone.
Suggestions?

Thanks for your reply!
The server is configured with static IP and running DHCP, DNS and mail, connectet to a D-Link router (the router also acting as a firewall). The DNS is configured with forwarder IP-addresses to the ISP and Google. Domain/hostname is changed from server.ljungh.net to server.local in postfix/main.cf (and other config files) and triggered if internet connection is lost by rebooting the router (or if internet connection to ISP is down for some other reason). Everything is working fine as long as the internet is up and running. The server is not acting as a firewall or multiple-network-controller.
Output from changeip -checkhostname:
Primary address = 192.168.0.196
Current HostName = server.ljungh.net
DNS HostName = server.ljungh.net
The names match. There is nothing to change.
dirserv:success = "success"
Output from dig server.ljungh.net:
; <<>> DiG 9.6.0-APPLE-P2 <<>> server.ljungh.net
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61515
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;server.ljungh.net. IN A
;; ANSWER SECTION:
server.ljungh.net. 10800 IN A 192.168.0.196
;; AUTHORITY SECTION:
ljungh.net. 10800 IN NS server.ljungh.net.
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sun May 30 16:45:38 2010
;; MSG SIZE rcvd: 65
Output from dig -x 192.168.0.196:
; <<>> DiG 9.6.0-APPLE-P2 <<>> -x 192.168.0.196
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 27573
;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 1, ADDITIONAL: 1
;; QUESTION SECTION:
;196.0.168.192.in-addr.arpa. IN PTR
;; ANSWER SECTION:
196.0.168.192.in-addr.arpa. 10800 IN PTR server.ljungh.net.
;; AUTHORITY SECTION:
0.168.192.in-addr.arpa. 10800 IN NS server.ljungh.net.
;; ADDITIONAL SECTION:
server.ljungh.net. 10800 IN A 192.168.0.196
;; Query time: 0 msec
;; SERVER: 127.0.0.1#53(127.0.0.1)
;; WHEN: Sun May 30 16:46:01 2010
;; MSG SIZE rcvd: 105

Back button not removing from the stack?

Hi,
I have the following code:
[[self navigationController]pushViewController:_newsDetailController animated:YES];
However, It doesn't seem to be removing from the stack when the user hits the back button on the UINavigationBar.
The reason I believe this, is because when you then select another item in my UITableView, it loads exactly the same details as the first time.
I have tried [_newsDetailController release]; but it still doesn't make any difference. It just crashes after the third selection.
This is what I'm doing in my didSelectRowAtIndexPath:
- (void)tableViewUITableView *)tableView didSelectRowAtIndexPathNSIndexPath *)indexPath {
[[self appDelegate] setCurrentlySelectedBlogItem:[[[self rssParser]rssItems]objectAtIndex:indexPath.row]];
[self.appDelegate loadNewsDetails];
Any help would be greatly appreciated. I've spent ages on this!
It worked fine until I added a UINavigationController.
Thanks,
Nick

Hi Nick, and welcome to the Dev Forum,
nrawlins wrote:
... It doesn't seem to be removing from the stack when the user hits the back button on the UINavigationBar.
I understand how your observations could make it seem like your _newsDetailController is somehow staying on the stack, but that's not what's going on here. If you want to see the stack, just add some logging before and after pushing or popping:
NSLog(@"stack: %@", self.navigationController.viewControllers);
I think we'll need to see more of your code to isolate the problem, but what we're looking for is a logic mistake which causes the detail controller to always display the info for the same item, regardless of which item is selected next. Here's a list of questions to guide your search, and/or show you which code we need to look at:
1) What's in the array returned by [[self rssParser]rssItems] ? It might help to add some logging in tableView:didSelectRowAtIndexPath like this:
- (void)tableView(UITableView *)tableView didSelectRowAtIndexPath(NSIndexPath *)indexPath {
NSArray *item = [[[self rssParser]rssItems]objectAtIndex:indexPath.row]];
NSLog(@"%s: item=%@", _func_, item);
[[self appDelegate] setCurrentlySelectedBlogItem:item];
[[self appDelegate] loadNewsDetails];
2) What does loadNewsDetails do? It looks like it finds the details for the item stored in currentlySelectedBlogItem. Is that right? Some logging in loadNewsDetails might help to make sure the correct details are loaded there. From your description it sounds like you already had this part of the code working right, but it wouldn't hurt to be sure it's still doing what you expect;
3) How does the data obtained in loadNewsDetails find its way to the details controller? This is the missing link not shown in the code you've posted so far. I think we need to look at:
3.1) Where and when the details controller is created;
3.2) Whether the same controller object is intended to persist from item to item, or whether a new instance of the controller is created each time an item is selected. The latter scheme is usually preferred for best memory management;
3.3) Is the current item and detail data stored in the detailsController or the app delegate? When is it stored, and when is it used?
For example, suppose the details controller is only created once and persists for the life of the table view. Then suppose loadNewDetails saves the new details in an ivar of the app delegate, and the code to fetch the new details is in viewDidLoad of the controller.
In the above scenario, viewDidLoad would run after the details controller was created, and if the details of the first selection were loaded by then, the details for the currently selected item would
be presented as expected. But viewDidLoad will normally only run once, so when the selection was changed, the new details would never be fetched, and the previous details will be displayed again.
The best way to avoid this and other related scenarios, is to create a new details controller each time a new selection is made from the table view:
// MyTableViewController.m
#import "myAppDelegate.h"
#import "NewsDetailController.h"
// called by loadNewsDetails as soon as details have been loaded
- (void)presentDetailController {
NewsDetailController *viewController = [[NewsDetailController alloc] // vc retainCount is 1
initWithNibName:@"NewsDetailController" bundle:nil];
// store new details in the detail controller; e.g.:
viewController.navigationItem.title = [self appDelegate].currentlySelectedBlogItem;
viewController.textView = [self appDelegate].currentDetails;
[self.navigationController pushViewController:viewController // vc retainCount is 2
animated:YES];
[release viewController]; // vc retainCount is 1
By releasing the new controller in the last line, we reduce its retain count to 1. Now the new controller is only retained by the stack, so when the stack is popped, the new controller will be dealloced.
If none of the above is helpful, please answer all the questions as best you can and post the indicated code, ok?
- Ray

Custom host-name for web application SharePoint 2010

I am facing a weird behavior. Can anyone help me regarding this?
Steps performed:
1. Created a web application using custom host name.
2. Created a site collection using "Blank" site template. Nothing issues.
3. Created another site collection using "Publishing" site template. Authentication prompt came multiple times. IIS logs/Fiddler/HTTP Watch are full with 401 entries.
4. Added the custom host-name with web server IP in local desktop hosts file(which is in intranet domain). Prompt issue fixed.
5. Authentication mode set as NTLM.

Hi DDasgupta,
After you created a web application with a custom host name, if you got a prompt for the user and you may face the following issues:
There is continuous prompt for the credentials
HTTP 401.1 error
This shows that there is a problem with the Loopback configuration. This situation should occur only when we access the application from the server machine.
For fixing the problem, we have to disable the Loopback value inside the registry.Open the Registry Editor (regedit.exe) and locate the following key:HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa, and create a new Key Value of type DWORD inside
it and set the value to 1.
More information, please refer to the link:
http://www.c-sharpcorner.com/UploadFile/40e97e/sharepoint-2010-creating-host-name-for-web-application/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Dynamic Global Host Name!!!

Hello Everybody!
I have Time Capsule 2TB, and i have an issue about it, which its how to connect to it via internet?
i know that i must have mobileme account and to be added to advanced in the airport utility.
then i have to setup the Dynamic Global Host Name, this is my problem?
how can i get the Dynamic Global host Name?
Is it from ISP?
is it supported by some regions? or all over the countries?
if so, is it supported in Egypt?
i gave a try and i contact my ISP (Vodafone) but they didnt hear anything or even know anything about the Dynamic Global Host Name. If from ISP, what could i tell them to understand me?
because when i asked about DGHN, no one understand me.
Thank you for your help,
Sincerely,,,

Abdelaal wrote:
now the ip address for the Time Capsule is 196.168.0.4
and the WAN IP address is 10.0.1.1 .
That sounds backwards. The public IP address 196.168.0.4 is administered out of Mauritius, which should make what you see a WAN address. An IP address 10.0.1.1 is a "private" IP address, which you'd expect to see in a LAN behind a NATting router.
(Back to My Mac isn't working properly because you may have more than one device on your network providing Network Address Translation (NAT). Try disabling NAT on one of the devices )
As it says, that means that you are behind multiple layers of routers providing translation of network addresses. Can you tell what WAN address is being assigned to your ADSL modem/router? I'd still try to put that device into "bridge" mode.

Images removed from Vault

When I update the Vault a separate folder in the same location gets populated with various images under the folder name "Images removed from Vault". Is there a need to retain this folder? Otherwise it seems to be a waste of space.

I wouldn't be surprised
But I want to clarify a point. Isn't "Deleting from Library" = "Deleting from Vault"? My understanding is that if you delete a Master from the Library, when you update that Library's Vault, the Master in the Vault is moved out of the Vault and placed in the "Removed from Vault" folder. In other words, there really isn't an interim user's step "Delete from Vault" other than just "Update Vault". No?

How to find the ITS and WAS host name

HI all,
I created one system in the portal .system admn->sysconfig->systems.
Now under the property catagories I selected ITS.
Now I have to enter ITS host name and port .How to get this host name and port from R/3.Can any body tell me the path from which transaction it will be available.
Similarly for WAS also.
Thanks in advance..!
Regards,
Krishna.

HI,
WAS Details
1. Goto se37 type : RSBB_URL_PREFIX_GET , execute ->
I_Handler class : CL_RSR_WWW_HTTP ->clear the I_message server entry -> execute -> WAS Details
ITS DEtails
1. goto se37 typr : RSBB_URL_PREFIX_GET , execute ->
I_Handler class : CL_HTTP_EXT_ITS ->clear the I_message
server entry -> execute -> ITS Details
EX: its path you will get a value like this
/sap/bc/gui/sap/its/....
use the values before its and like /sap/bc/gui/sap and ignore the rest

How can a user site be remove from my computer?

How can a user be removed from my computer? the user can't get on their site because of password encounters.
It seem that their password has been corrupted.

Could you provide a bit more information? Is it a local user or a network user? Would you want him to have access to his data again, or do you want to loose him with his data completely?
Have fun
Leo

Removing host name from jsessionid

We have a standard installing of IWS 6 and the host name is included in the jsessionid even if not configured in wep-apps.xml (we are using the default wep-apps.xml and there is no session-cookie tag in the file. Doc says you have to set session-cookie to add the host to the jsessionid, but it seems to be there by default)
How can we get rid of the host name in the jsessionid?

The easiest way would be to upgrade to 6.1, the default there is just a random string. I looked into changing the session id string before, and if you look at the session manager code, it gets the session id string from the calling process. I suppose you could simply add in a bit of code to strip off the hostname from the front of the string. Otherwise, I am not sure how iws6 creates the session id string.

Host name benig remove from relative link on some users computers IE 7 or IE8

Similar Messages

Maybe you are looking for