Host-target application for setting the PC(host) time to cRIO(target)

if there is any host-target application for setting the PC(host) time to cRIO(target)? if probably a sample program provided?

Hi Charles,
There's a function called RT Set Date and Time that you can make use of.
We don't have a sample program but this is a very simple VI to use. Read off the current date time in Windows, then enter the corresponding info into this VI and run it. The cRIO controller will then have its date time updated accordingly.
Regards,
Boon Chen

Similar Messages

Singleton class for logging in the application, and setting the flag

Hi Friends,
I have a singleton class for logging in the application, and setting the flag once logged. can some one help me in doing this.
with regards,

rtfm, for example here - http://www.javacamp.org/designPattern/

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen

On the initial set up for apple tv it just sits there trying to set the date and time . it is a wireless setup and the ipaddress and router address is correct . I can't get by this screen. The setting is on automatic and I have picked a city in my time zone yet it still tries to set a time and date but fails.
thanks

Make sure router is up to date. Try ethernet to rule out any wifi issues. Reboot ATV and router.

Javascript for setting the CropBox Units in Millimetres

Hi
I am looking for a Javascript for setting the CropBox Units in Millimetres.
I have a pdf mag that needs the CropBox settings of all the units to be 7.408 mm.
Any help pretty please?
Thanks

Hi,
here is a sample script that put boxes size in Millimetres into custom properties metadatas fields.
It can run from an Action, from the console, or from any form field (button…).
Feel free to re-use/customize it.
var mbox = this.getPageBox("Media");
var Mzeroz = Math.round(mbox[0] * 0.3527);
var Munz = Math.round(mbox[1] * 0.3527);
var Mdeuz = Math.round(mbox[2] * 0.3527);
var Mtroiz = Math.round(mbox[3] * 0.3527);
var cbox = this.getPageBox("Crop");
var Czeroz = Math.round(cbox[0] * 0.3527);
var Cunz = Math.round(cbox[1] * 0.3527);
var Cdeuz = Math.round(cbox[2] * 0.3527);
var Ctroiz = Math.round(cbox[3] * 0.3527);
var tbox = this.getPageBox("Trim");
var Tzeroz = Math.round(tbox[0] * 0.3527);
var Tunz = Math.round(tbox[1] * 0.3527);
var Tdeuz = Math.round(tbox[2] * 0.3527);
var Ttroiz = Math.round(tbox[3] * 0.3527);
var bbox = this.getPageBox("Bleed");
var Bzeroz = Math.round(bbox[0] * 0.3527);
var Bunz = Math.round(bbox[1] * 0.3527);
var Bdeuz = Math.round(bbox[2] * 0.3527);
var Btroiz = Math.round(bbox[3] * 0.3527);
var abox = this.getPageBox("Art");
var Azeroz = Math.round(abox[0] * 0.3527);
var Aunz = Math.round(abox[1] * 0.3527);
var Adeuz = Math.round(abox[2] * 0.3527);
var Atroiz = Math.round(abox[3] * 0.3527);
if (app.language == "FRA")
this.info.Zone_de_media_en_mm = Mzeroz + ", " + Mdeuz + ", " + Munz + ", " + Mtroiz;
this.info.Zone_de_recadrage_en_mm = Czeroz + ", " + Cdeuz + ", " + Cunz + ", " + Ctroiz;
this.info.Zone_de_rognage_en_mm = Tzeroz + ", " + Tdeuz + ", " + Tunz + ", " + Ttroiz;
this.info.Zone_de_fond_perdu_en_mm = Bzeroz + ", " + Bdeuz + ", " + Bunz + ", " + Btroiz;
this.info.Zone_graphique_en_mm = Azeroz + ", " + Adeuz + ", " + Aunz + ", " + Atroiz;
else
this.info.MediaBox_in_mm = Mzeroz + ", " + Mdeuz + ", " + Munz + ", " + Mtroiz;
this.info.CropBox_in_mm = Czeroz + ", " + Cdeuz + ", " + Cunz + ", " + Ctroiz;
this.info.TrimBox_in_mm = Tzeroz + ", " + Tdeuz + ", " + Tunz + ", " + Ttroiz;
this.info.BleedBox_in_mm = Bzeroz + ", " + Bdeuz + ", " + Bunz + ", " + Btroiz;
this.info.ArtBox_in_mm = Azeroz + ", " + Adeuz + ", " + Aunz + ", " + Atroiz;

Settings for Mark for deletion for setting the exchange Rates

Hi all,
Can you tell me where is the settings for Mark for deletion for setting the exchange Rates.
User has deleted all the MEND rates in 'OB08'.
and he cannot input them again, gets error message "an entry with this key is marked for deletion"
Rg
vk

Hi
Try as said in help - Message number is SV010
You can:
enter another key
delete the entries before entering the new entry
The entries flagged for deletion can then no longer be reactivated.
End the error dialog with Cancel. Choose Save and repeat your new entry.
reactivate the entry marked for deletion to change it :
and return to the overview screen with Back.
Choose Display deleted entries in menu Choose to select all the deleted entries.
Mark the entries that you want to reactivate.
Choose Retrieve.
VVR

How do I programatically set the date and time of my FP-2000 in LabVIEW RT?

I checked out the following knowledgebase document which has a tool for setting the system time, but I also need to set the date:
http://zone.ni.com/devzone/explprog.nsf/ 6c163603265406328625682a006ed37d/ 37175dbc3696a1ac86256a850051097d?OpenDoc ument
How can I do this?
-Jim

That is great, Steven. I also found a solution using GetSystemTime and SetSystemTime which are functions in kernel32.dll that get and set the system date-time. This function call worked on the FP-2000 that I have and should work on RT-Embeded systes, as well.
-Jim
Attachments:
GetSystemTime.vi ‏16 KB
SetSystemTime.vi ‏14 KB

Set the date and time

how to set the date and time in apple tv?

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

I just bought my apple tv and it says that it can't set the date and time? How do i fix this?

Welcome to the Apple Community.
A number of users have encountered this problem, for existing users the problem has largely been resolved by restarting the Apple TV. However since you are a new user it would be wise to check that your settings are correct to begin with. Ensure the router allows access over port 123 (TCP) and that you are using the DNS settings provided by the ISP and not your own.

HOW DO I SET THE DATE AND TIME ON MY HP OFFICEJET 8600

just bought the HP officejet 8600 all in one printer, and I cant seem to set the date and time for the fax portion of the printer, please help.

Set the date and timeOn the control panel, touch the Right Arrow ( ), and then touch Setup ( ).Touch the Down Arrow ( ), and then touch Preferences .Touch Date and Time: , and then touch the Up and Down Arrows ( ) to set the month, day, and year.Touch Done , and then touch the Return Arrow ( ) to return to the Preferences menu.Set the language and country/regionIn the Preferences menu, touch Language .Touch your preferred language, and then touch Yes to confirm your choice. The product returns to the Preferences menu.On the Preferences menu, touch Country/Region , and then touch your specific country/region.Touch Yes to confirm your choice, and then touch the Home icon ( ) to return to the main menu.

Setting the date and time on my Verve 450 answerin...

I have set the time and date on all the handsets, but when we pick up a voicemail, the date and time on the message bears no relation to reality! The instructions do not provide any advice on setting the date and time on the answering machine.

Well after i change it it seems fine, but when i use it another time it has been changed.

How do you set the amount of time the screen stays lite after your last use?

How do you set the amount of time the screen stays lite after your last use?

Settings>General>Auto-Lock.

HT1551 Is setting the date and time a one-time process?

Is setting the date and time a one-time process?

What exactly do you mean? You don't know how to set the time? You set the time but something changes it?

Sql statement for retrieving the last update time of a table

Hello all,
Can somebody give me an example of sql statement for retrieving the last update time of an oracle table.
Thank you
Il

Thanks for the fast replies. It works great when I test it as a sql statement but when trying to populate a datalist with it it raises the following exception:
Exception Details: System.ArgumentException: SCN_TO_TIMESTAMP(MAX(ORA_ROWSCN is neither a DataColumn nor a DataRelation for table DefaultView
Part of the Datalist Code:
ItemTemplate>
Line 12:             SCN_TO_TIMESTAMP(MAX(ORA_ROWSCN)):
Line 13:             <asp:Label ID="SCN_TO_TIMESTAMP_MAX_ORA_ROWSCN__Label" runat="server" Text='<%# Eval("[SCN_TO_TIMESTAMP(MAX(ORA_ROWSCN))]") %>'>
Line 14:             </asp:Label><br/>
Line 15:             <br/>
{code}
Why is this happening? Any ideas?
Il

My Apple TV won't set the date and time! What can I do???

My Apple TV won't set the date and time! What can I do???

That means it's having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic. Ensure router is up to date, reboot all devices. If on wifi try ethernet.

Application server 8.1 alternative for Setting the Document Preferences

hi All,
I used to do the following under application server 7 to set the Document preferences:
To use the Administration interface to set the document preferences, follow these steps:
1. In the left pane, for the application server instance, open HTTP Server.
2. Open Virtual Servers.
3. Click the name of the virtual server you want to edit.
4. Click the Doc Handling tab.
5. Click Doc Preferences.
6. Choose the appropriate field values, as discussed in the following sections.
7. Click OK.
I need to do the same thing in application server 8.1 how can i do that?
What is the alternative procedure?
I want to have multiple indexes under the same instance which hosts multiple applications
Thanks,
Scotty

hi,
Can anyone please guide me to the correct solution?
I have a project and i dont know whether i am stepping right?
I read in the docs about "welcome-file-list" that is found in the default-web.xml file and it pointed that i can design my application's web.xml to include "welcome-file-list" to point to my customized index.html
If this is the case, then how can i point my browser to the server is it by the context root only?
Your quick reply is really appreciated.
Thanks,
Scotty

Host-target application for setting the PC(host) time to cRIO(target)

Similar Messages

Maybe you are looking for