Hot deployment not playing along with coherence-tx.rar

I would like to setup my application so that the coherence and tangosol jars are owned by the application. Under this setup it will aid in hot deployment so that the coherence classloader is destroyed along with the application. Using the transaction services requires that I put the tangosol and coherence jars on the boot classpath of weblogic. I could live with this if there is an easy way to tell coherence to clear all caches that I can call from a startup servlet when my application redeploys.
Is there some other way of setting this up so that hot deployments destroy all caches and coherence-tx.rar can still be utilized?

In a development environment where classes can change structure it is more semantically correct to destroy all references to the old class structure otherwise you get IncompatibleClassChangeErrors.
It is also more convenient for us to deploy the application without any external references. It makes setting up a QA server much easier, for example, if we don't have to install coherence and modify classpaths to get it up.
There is nothing special about the architecture just a standard EAR deployment with all 3rdparty classes packaged into the EAR.

Similar Messages

My midi keyboard is playing multiple sounds when I press a key. Like when I play a note on the piano preset, there is a snare hit or a shaker that plays along withe the note. Is there a setting I need to change to get rid of it?

this recently happened, never had the problem before. I've restored my midi keyboard to factory settings but the problem persists. I go into garage band and click on the piano preset, but when I play a note it plays multiple instruments. Say I hit the C note On my keyboard, it plays the C note, but along with it is a snare hit or a shaker. And this is for every note. It seems as though the keyboard has its own setting, but I've tried resetting it. Again it's never happens before, just recently is there a way to get rid of that background sound? It's very dufficu to make music with multiple instruments playing in one note!

If it happens again the make sure that you aren't suppressing website colors.
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*https://support.mozilla.org/kb/Options+window+-+Content+panel
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

How can I play along with a MIDI sequence in Mainstage?

Hi folks,
I have some live performances where I would like to play along with MIDI sequences. I've been using Mainstage and software instruments, but can't for the life of me figure out how do play along with MIDI sequences. There's a nice plugin (whose name escapes me at the moment) that lets you play along with looped audio tracks....but a MIDI file would be better for my purposes. Is there a way to do this?
Thanks in advance,
-Mike Kaplan

Hi
Not directly within Mainstage.... there could be workarounds using 3rd party applications slaved to MS, but it would be a complete pita (compared to working with scripts to iTunes Playlists or just bouncing the MIDI files to audio).
CCT

Using Garageband amp simulators to play along with iTunes

Its probably a bug, but if iPod is playing a song and you open Garageband in iPad, iPod keeps playing. So you can configure an input and turn on input monitoring with and amp simulator to play along with iPod without having to import anything. However, the iPod play controls are not enabled. Double click the home button and swipe right to change the song, and the iPod controls are not enabled - it thinks the iPod doesn't have audio control.
Instead of fixing the bug by turning off iPod audio (the way most audio apps work), Apple should fix it by enabling the play controls. Then Garageband has a nice and simple way to play along with iPod tunes leveraging the iPad multi-tasking features, without having to do song imports.

Cool tip dude! I just tried it and it works a treat with the synths too. I panned the synth over to one side to try and separate the sounds out, which worked a bit but would be nice if I could pan itunes the other way. Great workaround for practicing and figuring out chords/keys etc. Thanks!

We love apple email, but it does not play wall with other venders when you want to use your own domain (lags, disconnections, etc.)? What vendor should we use to make it push and work well? We want to stay with Apple Mail.

Help, our AppleMail does not play well with other Vendord to use our own domain. iCloud mail works great, but so far others we have tried lag, disconnec, etc. not nearly as good as icloud mail. Should we try exchange or office 365 plans with Apple Mail/ a lot more expensive?

Microsoft Exchange is the best business solution, Office 365 will give a hosted version that works well, as you noted it is not the cheapest. You should also look at Zimbra, an excellent service.

Can I get an older release of Firefox? 36.0 does not play well with Windows 7.

Firefox 36.0.4 does not play well with Windows 7. If it opens at all, it freezes within a minute so the screen goes pale and I get the classic spinning circle of death. Then the header says (not responding).
Ideally I would like to drop back to version 32 or 33, but 34 and 35 had fewer problems.
Can I find older versions anywhere?

You can [[Install an older version of Firefox]] any time. But which will cause significant security risk. So If you can't use the latest version of Firefox, we recommend that you use the latest version of another browser.
If the latest version of Firefox is causing problems for you or you just don't like something about it, please give us feedback about it here:
[https://input.mozilla.org/en-US/feedback/ Submit your feedback and suggestions about Firefox]
Anyway head for the ftp for older version but please be careful with these: ftp://ftp.eu.mozilla.org/pub/firefox/releases/

I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

I cannot play music with my slideshows. I setup the music but it does not play, even with my older slideshows I hear no music.

This category is for iPod shuffle. Is that the type of iPod you have, because your description of the problem does not sound like it's about a shuffle? If it's not a shuffle, what is the iPod model...?
There is music there and I can play it connected to laptop.
Are you doing the playing using the iPod, or are you playing the music using iTunes on the laptop?
All mucis icons read "No music" and this is not correct
Do these icons with "No music" appear on the laptop's screen, or on the iPod's screen

Getting a column in numbers '09 to not sort along with other columns

How do I have a header column not sort along with the other columns. for example, if I have a spread sheet with all my contacts and there is a numbers header column on the left, how do I get the last name column to sort but not have the header column sort along with it?
Patrick
Ohio

pmalone wrote:
How do I have a header column not sort along with the other columns. for example, if I have a spread sheet with all my contacts and there is a numbers header column on the left, how do I get the last name column to sort but not have the header column sort along with it?
Feature unavailable.
We sort every columns or none of them.
Yvan KOENIG (VALLAURIS, France) vendredi 18 septembre 2009 19:23:57

Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing Is there a fix for UConnect issue?

Since my IPOD Touch upgraded to IOS 8.1.2 it will not play well with my 2013 Charger's UConnect entertainment system. It will not build a library so I can not Browse or Shuffle. The only thing it does is list all the songs alphabetically when connected via USB.

- Contact the manufacturer/go to their support site.
- Sometimes this works
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Sometimes and ISO update breaks compatibioity and a firmware update the the dock is required or an iOS update is required.
Downgrading the iOS is not supported by Apple.

Monitoring while playing along with tracks

This is probably a stupid question but for some reason I can't quite figure it out.
I have recorded several tracks of audio instruments and I want to record a live guitar audio tracks onto track 1 using Guitar Rig (or similar). When I arm the track I can hear the plug-in effect but when I hit 'play' it disappears to I can't play along with my backngs (to practice!). I hear the guitar when in record mode but is there a setting I am missing to play along with my other tracks?
Thanks
S

Check the settings of Software Monitoring in your audio preferences, and make sure that Auto Input Switching is on.

EAR hot deploy - not very hot for WARs.....

HI ,
I have an application with 4 WARs and 10 EJBs all bundled in
a WAR, when I redeploy it it seems to work fine for the EJBs
(I am compiling them at deploy time - they seem to only recompile
the EJBs that have changed), and the WARs seem to hot-deploy
OK, but the JSPs in them all need to be recompiled even if the
WAR has not changed at all , I'm not sure if this is expected
behaviour in re-deploying stuff, it certainly doesn;t seem
intuitive to me .....
Anyone got any ideas ?
Cheers,
Brian

Rita,
Is you server running? This means that an HTTP 404 was returned when trying
to access the DataSyncServlet. Check your server name, port, application
name etc. under the Connection Settings.
If you want to verify the URL you can just hit it with a web browser. It
should look something like:
http://locahost:7501/p13nAppDataSync/DataSyncServlet (for an application
called 'p13n')
Sincerely,
Daniel Selman
"Rita" <[email protected]> wrote in message
news:3d3ef190$[email protected]..
>
The following is the error I got when I tried to hot deploy a portal inEBCC for
welogic 7.0:
"Not found" error occurred when connecting to server. Please go toConnection
Settings and check service names.
Any help on that will be greatly appreciated?
Thanks,
Rita

How can I listen to a song from itunes and play along with my guitar on ipad2/apogee jam?

I am trying to utilze my ipad2 for guitar practce but having a hard time getting my technology under control. I have garage band as well as the apogee jam and I can easily hook it in and play, create songs etc. But what I like to do is play along at the same time with songs from my itunes library or from youtube. whenever I switch to another app the recording feed from garage band stops until I return to the app. How do people get around this, if they do?
Thanks

Not at this time. iTunes Match downloads all music listened to on iOS devices. Period.

3GPP media not playing correctly with QT7.1

Hi!
I have one file (3GPP media) that plays awfully bad with QT7.1. There are a lot of "squares" and strange colors that appears the whole time while playing. The same file plays OK with a free player called VideoLAN (VLC). Why can not QT7.1 play the same file as good as VLC on the same computer? What can I do to fix this?
Dell Dimension 4550 Windows XP Pro

i did read somewhere a while back that Cyberlink (creators of PowerDVD) were developing a software MPEG2 encoder that would allow software-driven analog tuners to work with MCE, but i haven't heard anything since...
the actual limitation is down to Microsoft themselves

IDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops in that the viewer access from the main menu to play along with

iDVD 7.1.2: I am making music instrument instructional DVDs, and I want to include several audio loops that the viewer access from the main menu to play along with

Export the slideshow out of iMovie via the File ➙ Share ➙ File menu option as a 480p Quicktime movie.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Deploy JSP/Servlet along with EJB

how could deploy EJB with JSP/Servlet?.
First i have
package project.account
1.HomeInterface class
2.RemoteInterface class
3.Bean class
4.Client class
I deployed the above bean in J2EE using Deploytool GUI.
run the client like this
java -classpath %CLASSPATH%;personDepClientClient.jar project.account.Client
it displays result at prompt
what i am asking is
now i wrote JSP file which is kept also this project.account package
i used the JSP file as client for the that bean.
it is Show.jsp file(client file)
<%@ page language="java" %>
<%@ page import="java.util.*" %>
<%@ page import="javax.naming.Context" %>
<%@ page import="javax.naming.InitialContext" %>
<%@ page import="javax.rmi.PortableRemoteObject" %>
<%
     double balance;
try
     Context initi = new InitialContext();
     Object ref = initi.lookup("AccountHome");
     AccountHome home = (AccountHome)javax.rmi.PortableRemoteObject.narrow(ref,AccountHome.class);
     AccountRemote vijay = home.create("200","vijay",0.00);
     vijay.credit(2000.0);
     vijay.debit(600);
     balance = vijay.getBalance();
%>
     <tr>
<td width="38%" height="31">
</td>
<td width="62%" height="31">
<div align="center"><%= balance %></div>
</td>
     </tr>
<%
     AccountRemote kumar = home.create("199", "kumar", 0.00);
     kumar.credit(14000);
     AccountRemote xyz = home.findByPrimaryKey("199");
     xyz.debit(200.00);
     balance = xyz.getBalance();
%>
     <tr>
<td width="38%" height="31">
</td>
<td width="62%" height="31">
<div align="center"><%= balance %></div>
</td>
     </tr>
<%}
catch(Exception ex)
     System.err.println("Caught an exception." );
ex.printStackTrace();
%>
after deployed this JSP file and executed as
http://localhost:8000/project/person/Show.jsp
it displays error as follows
unable to find AccountRemote,AccountHome,findByPrimaryKey
How could deploy JSP along with EJB?.
pls any one tells steps to be followed while Deploying EJB/JSP.
with thanks
vijay

Hmmmm...
ssniazi does nothing but ask for contact information or recommend Oracle products.
Based on this I consider it likely that this person is some sort of sales representative either directly or indirectly associated with Oracle.
I personally wouldn't provide any contact information to this person. Nor would I accept any advice until this person starts to actually provide some solutions or at least correctly reveals any financial interests that they might have.

Hot deployment not playing along with coherence-tx.rar

Similar Messages

Maybe you are looking for