My midi keyboard is playing multiple sounds when I press a key. Like when I play a note on the piano preset, there is a snare hit or a shaker that plays along withe the note. Is there a setting I need to change to get rid of it?

this recently happened, never had the problem before. I've restored my midi keyboard to factory settings but the problem persists. I go into garage band and click on the piano preset, but when I play a note it plays multiple instruments. Say I hit the C note On my keyboard, it plays the C note, but along with it is a snare hit or a shaker. And this is for every note. It seems as though the keyboard has its own setting, but I've tried resetting it. Again it's never happens before, just recently is there a way to get rid of that background sound? It's very dufficu to make music with multiple instruments playing in one note!

If it happens again the make sure that you aren't suppressing website colors.
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*https://support.mozilla.org/kb/Options+window+-+Content+panel
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Similar Messages

  • Flash Player playing multiple sound feeds at once...even when browser is closed

    I recently updated my Flash Player to 11.3 (most recent version). When I go to a site which utilizes Flash (e.g. YouTube), I will start the video, and then about 10 seconds later, I get multiple sound feeds at the same time. They all sound like commercials, or tv channels. Even when I close my browser, the sound continues. When I open my sound mixer, there is a "program" listed of "winrscmde" which is playing the various audio channels all at once. When I go into the task manager, "winrscmde" shows as a svchost.exe *32. When I stop that service the sound stops. It will start again when i access a flash site. When I uninstall Flash Player 11.3, this stops.
    I'm running Windows 7 - 64 bit with latest updates. IE 9.0.8112.16421
    Any help would be appreciated.

    Well, I think I fixed the problem.
    I found this topic:
    http://www.bleepingcomputer.com/forums/topic442928.html
    About the second post down, the poster recommends downloading TDS killer as winrscmde.exe is disquised as svchhost.exe in the \windows\system32 folder (you have to click on "Properties", then "Details" tab and check the original filename...if it's bogus, it'll say winrscmde.exe as the original name).
    I also ran the aswMBR program as well as FixTDSS (http://www.symantec.com/content/en/us/global/removal_tool/threat_writeups/FixTDSS.exe).
    That seemed to fix the issue. Just reinstalled Flash and don't get the same issues. The svchost.exe in the \windows\system32 folder is legit!
    Hope that helps anyone else with the same problem.

  • Is there any harm in installing an older version of Acrobat along with the new version?

    I'm running Acrobat v11.0.04 on my iMac. For my work, I have to create pdfs and upload them to a special server that then generates dynamic versions of them (blah blah blah... I don't really understand that part of it...). Anyway, it can't use PDFs created by this version of Acrobat... or the last few versions, for that matter. So... is there any harm in installing version 8 (which does work) on my iMac? I don't want to get rid of version 11... I want to have both.
    Thanks!
    julie

    I am not sure anyone knows what the server needs. We just know what doesn't work. What DOES work are the pdfs I compile (I have to combine two pdfs into one) are the ones created from version 8. I will ask if I can get specifications. It's confusing because I create the pdfs and send them to someone else. He uploads them to this server which is run by another company. So there are a lot of different levels involved. All I know is that every time a new version of Acrobat comes out, I create a test pdf and it doesn't work. I always have to go back to version 8. I recently bought a new computer and didn't want to install version 8... but unless we can figure out  a way to generate the "right" pdfs, it looks like I  might have to. Anyway, I'll see what I can find out.

  • How to create a dialog window with no button that opens along with the main window?

    When the main window is open, the dialog window opens up immediately and can be closed by key press. At other times, when the next step, ie: decision, comes to, the another dialog window pops up again and is again closed by key press. Does anyone know how to do? Use the sub-Vi? notification method? occurrence method?
    And another thing: how to create a reusable dialog window with no button so that different messages can be sent to it and it can closed by key press. And how to pass the string to the title of the dialog window programmatically?

    For your functionality (If I understand it right), nothing needs to be in the event structure. Pressing any key just triggers the event, thus finishing the VI (there is no while loop).
    Could you tell me what you mean my "it won't run properly"? Make sure that the front panel of the subVI is closed before starting the main VI. Remember that the subVI is set to "open when called" and "close afterwards if originally closed". So, if you had the panel open already, it won't of course close when finished!
    (Actually, the problems is worse when you have the subVI panel open when starting the main VI. you get a catch22 and labVIEW locks up because (1) the subVI is set to dialog and grabs all attention but (2) it has not been
    called, thus the event cannot be triggered. So don't do that!!!! As a quick workaround, add the modification shown in the attached image to ensure the panel of the subVI is closed.)
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    CloseNoButtonDialog.gif ‏3 KB

  • When I open my MacBook Air the keyboard comes up along with the screen and does not stay still?!

    When I open my MacBook Air the keyboard comes up along with the screen and does not stay still. So I need to hold down the keyboard while i open it. Other than that it works fine despite the fact that the fan noise some times is loud and sometimes it's getting warm at the base. I wonder if this can be fixed if i go to one of the apple branches.

    Yes. Take the computer to the Apple store to have it fixed.
    Best

  • When I click on the iPhoto a gray appears along with the perpetual wheel but does not load.   Any recommendations?

    When I click on the iPhoto a gray appears along with the perpetual wheel but does not load.   Any recommendations?

    Assuming you're using iPhoto 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update.

    I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update. Before the update if i had minimized windows they would stay minimized when i opened a new window. Please help ,I would guess it is just a setting somewhere but i cannot figure out where the setting is. Thanks jason

    This issue can be caused by the ASK.com Toolbar.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Lost the ability to play multiple sounds!

    Since switching to archlinux, the only problem that I am unable solve is the inablity to play multiple sounds.. i had this problem when i first installed archlinux. back then i tried installing pulseaudio and found that cumbersome. eventually went back to alsa and found magically i could play sounds at once..
    now again it has reoccurred ever since the module init tools upgrade. i have tried reconfiguring alsa with alsaconf with no avail.
    on trying to play sound file from the 2nd app i get a knotif saying
    The audio playback device HDA Intel (ALC880 Analog) does not work
    Falling back to .
    some of the conf files i have:
    [$]> grep MODULES /etc/rc.conf
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MODULES=(e100 mii slhc snd-hda-intel snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd soundcore !snd-pcsp)
    [$]> grep DAEMONS /etc/rc.conf
    # DAEMONS
    DAEMONS=(syslog-ng dbus @network netfs crond alsa hal cups @openntpd)
    [$]> cat /etc/modprobe.d/modprobe.conf
    # /etc/modprobe.d/modprobe.conf (for v2.6 kernels)
    [$]> cat /etc/modprobe.d/sound.conf
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    [$]> cat /etc/libao.conf
    default_driver=alsa10
    [$]> lspci | grep -i audio
    00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)

    djszapi wrote:It seems to good. Did you try pulseaudio now too ?
    no i dont want to. it doesn't seem right with kde

  • I have Photoshop 12, installed online.  My computer crashed and was repaired, but Photoshop was not restored.  I see it in my products, along with the serial number/activation key, but no download is available.  How do I re-download my product?

    I have Photoshop 12, installed online.  My computer crashed and was repaired, but Photoshop was not restored.  I see it in my products, along with the serial number/activation key, but no download is available.  How do I re-download my product?

    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat.
    There is also a phone option. 1 (800) 833-6687
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

  • When will I receive my I phone 6 case which i ordered along with the Iphone6 ?As per the website it says october . How long is the wait time for the Iphone 6 case?

    When will I receive my I phone 6 case which i ordered along with the I phone 6 ?As per the website it says October. How long is the wait time for the I phone 6 case?

    While we have no idea within this Community Forum how long you would have to wait for your iPhone 6 Case, I can tell you that there would not be a "general" answer of value.  Like any product that is available in different materials and colors, the inventory varies based on what you have specifically ordered.  For example, I visited an Apple Store on the day after the iPhone 6 became available and was interested in the "Midnight Blue" Leather"  Apple iPhone 6 Case.  The store had plenty of all the other colors, but that specific case and color had sold out that morning. 

  • The "Apple ID Password box along with the keyboard keeps popping up on my iPad and stays there.  I have changed my email address on my iMac but my old one still remains on the iPad.  Also changed password.  Nothing works!  I can't use the iPad like this!

    The "apple ID Password" box along with the keyboard pops up when I turn the iPad on and it stays there.  I have changed my email address on my iMac and also changed my password.  The old email address is still on the iPad.  Anyway, I can't use the iPad because can't get the apple id password box to go away.  Thanks for any help!

    This is an older photo but the sleep and home buttons are still in the same place on all iPads. The home button is the round button at the bottom of the iPad and the sleep button is also called the on/off button and it is at the top right corner of the iPad.

  • Is there a way of shifting purchases from one account to another with the same billing information, so that I don't lose purchases made by my iPhone when I sync?

    The AOL address I was using for my iTunes account has been deleted due to me not signing in for awhile and I'm afraid that I will lose all of my purchases made from my iphone when I sync it into iTunes for a much needed update and so that I can (hopefully) transfer its data to my new iPhone 4...
    The only time I have synced my current iPhone was when I activated it but since then I have not been able to sync with my computer and now have a new one.
    Sorry about the garbled way this is written but I desperately need help:
    1, Is there a way of shifting purchases from one account to another with the same billing information?
    Or
    2, is there a way of recovering my old account and changing the details?
    Any other help is greatly appreciated
    Thom

    You don't need to access your e-mail account, just get into your Apple account and change the e-mail address. If you can't access your Apple account, then you have a bigger issue to contend with.

  • When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it, fix?

    When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get an additional new tab to open. How do I get only a single page to open?

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    '''For Firefox versions previous to 29.0:'''
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox"[[Image:Button reset]] button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    '''For Firefox 29.0 and above:'''
    #Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    #At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • Tthe flood filter is in my plugins folder along with the other plugins I have, but not in cc 2014. It's also in Adobe bridge associated with cc 2014, but not in cc 2014 Photoshop. i hope you get this because i forwarded  your info to HCS and now I'm all m

    the flood filter is in my plugins folder along with the other plugins I have, but not in cc 2014. It's also in Adobe bridge associated with cc 2014, but not in cc 2014 Photoshop. i hope you get this because i forwarded  your info to HCS and now I'm all mixed up as to this gets forward.

    Unfortunately, you are not addressing Adobe here in the user forums.
    However, there are many highly experienced volunteer users here willing to help.
    Can you please clarify:  are you saying that your Flood filter (whatever that is) is in your Bridge folder but not in Photoshop?
    UPDATE:  I Googled your Flood Filter and discovered it's not an Adobe filter at all.  Have you contacted its manufacturer, Flaming Pear?  What do they say?

  • Deleted cell number appears (along with the edited number) when sending a text.  How do I get rid of it?

    Deleted cell number appears (along with the edited number) when sending a text.  How do I get rid of it?

    It has nothing to do with iOS 6. It's always been that way. Given that it's been this way for so long, one assumes that Apple knows about it and has their own reasons for not changing it.
    Restore the phone as new, not from back up to delete the numbers. Or, wait until the cache gets overwritten.
    Best of luck.

Maybe you are looking for