Hot to get successive data one by one

Hello
I am using LabVIEW 8.6, windows vista, and NI USB 5132 to get successive signal.
Than I am trying to make a program to count the signal rate.
I want to use the data to do the statistics.
the attachment is my trial code.
the problem is I always get many copies of one signal rate.
Could anyone help me correct my code?
Thanks!
Cynitha
Attachments:
niScope digitizer counter 012910.vi ‏67 KB

Nothing you have there controls the number of measurements. Your measurement loop is stopped with the front panel button. Perhaps you would want to connect the operator provided count to a for loop with the scope code inside that. What you are doing to the existing for loop is nonsensical. With the scope code inside a for loop or a while loop that terminates after x number of loops, you would want to autoindex the data when it leaves the loop. That's the default behavior of a for loop. Your existing while loop does not do that and that is why you have a single data point.

Similar Messages

I lost my iPhone device, how can I get my data back on another one without using an iCloud backup just back up on i Tunes, Please Help.

I lost my iPhone device, how can I get my data back on another one without using an iCloud backup just back up on i Tunes, Please Help.??

You can find the backup files and then copy them to a safe place if you are worrying about this.
iTunes places the backup files in these places:
Mac: ~/Library/Application Support/MobileSync/Backup/
The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
Windows Vista, Windows 7, and Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
To quickly access the AppData folder, click Start. In the search bar, type %appdata%, then press Return.
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
To quickly access the Application Data folder, click Start, then choose Run. In the search bar, type %appdata%, then click OK.

How to get the data from multiple nodes to one table

Hi All,
How to get the data from multiple nodes to one table.examples nodes are like A B C D E relation also maintained
Regards,
Indra

HI Indra,
From Node A, get the values of the attributes as
lo_NodeA->GET_STATIC_ATTRIBUTES( IMPORTING STATIC_ATTRIBUTES = ls_attributesA ).
Similarily get all the node values from B, C, D and E.
Finally append all your ls records to the table.
Hope you are clear.
BR,
RAM.

Query to get the data of all the columns in a table except any one column

Can anyone please tell how to write a query to get the data of all the columns in a table except one particular column..
For Example:
Let us consider the EMP table.,
From this table except the column comm all the remaining columns of the table should be listed
For this we can write a query like this..
Select empno, ename, job, mgr, sal, hiredate, deptno from emp;
Just to avoid only one column, I mentioned all the remaining ( 7 ) columns of the table in the query..
As the EMP table consists only 8 columns, it doesn't seem much difficult to mention all the columns in the query,
but if a table have 100 columns in the table, then do we have to mention all the columns in the query..?
Is there any other way of writing the query to get the required result..?
Thanks..

Your best best it to just list all the columns. Any other method will just cause more headaches and complicated code.
If you really need to list all the columns for a table because you don't want to type them, just use something like...
SQL> ed
Wrote file afiedt.buf
1 select trim(',' from sys_connect_by_path(column_name,',')) as columns
2 from (select column_name, row_number() over (order by column_id) as column_id
3        from user_tab_cols
4        where column_name not in ('COMM')
5        and   table_name = 'EMP'
6       )
7 where connect_by_isleaf = 1
8 connect by column_id = prior column_id + 1
9* start with column_id = 1
SQL> /
COLUMNS
EMPNO,ENAME,JOB,MGR,HIREDATE,SAL,DEPTNO
SQL>

Function module to get 'Date one year in the past' in APO

Hi,
Required function module to get date one year in the past in APO.
Thanks and regards,
M.R.Reddy.

Hi Reddy,
Try these function modules
/SAPAPO/DATE
/SAPAPO/FISCAL_BDATE
/SAPPO/MAPI_MAP_CREATDATE
/SAPPO/MAPI_MAP_POSTDATE
/SAPAPO/LCP_CALC_DATE
/SAPAPO/VS_ORDER_GET_DATES
/SAPAPO/PERIOD_CONVERT_DATE
/SAPAPO/PERIOD_DATE_GET_FROMTO
/SAPAPO/PERIOD_GET_DATE_RANGE
/SAPAPO/PERIOD_GET_FOR_DATE
/SAPAPO/PERIOD_GET_FROM_TODATE
Regards
R. Senthil Mareeswaran.

Required function module to get date one year in the past.

Hi,
Required function module to get date one year in the past.
Thanks and regards,
M.R.Reddy.

Hello,
You can check this:
DATA:
V_DATE1 TYPE D,
V_DATE2 TYPE D.
V_DATE1 = SY-DATUM.
TRY.
    CALL METHOD CL_HRPAD_DATE_COMPUTATIONS=>SUBTRACT_YEARS_FROM_DATE
      EXPORTING
        START_DATE = V_DATE1
        YEARS      = 1
      RECEIVING
        DATE       = V_DATE2.
CATCH CX_HRPA_VIOLATED_POSTCONDITION .
ENDTRY.
WRITE:
/ V_DATE1, / V_DATE2.
Hope this helps.
Br,
Suhas

When copying one of my old cassettes to a CD how do I get the data - album name, artist, etc. to show up when the CD is inserted into a player?

When copying one of my old cassettes to a CD how do I get the data - album name, artist, etc. to show up when the CD is inserted into a player?

To what format file are you saving from Audacity? Although technically AIFF format can save data tags within the file itself I have not found this to always work with all applications. Likely the information you enter into Audacity is just being saved in the file name. When you add this file to iTunes, if iTunes cannot find tags it recognizes it will simply add the track with the file name as the track name. You need to add the tracks to iTunes, then enter the information using File > Get Info for a track or series of tracks,
Some of the above information may vary slightly depending upon the file format being used.
It helps when asking questions here to provide as much information at the onset as possible. We didn't know until this stage that all these menus were in fact part of Audacity and not iTunes.

My iphones broken and i'm getting a new one today, i haven't synced this one with itunes, is all my data backed up on icloud? so i can access all my contacts and photos through icloud on the new device?

my iphones broken and i'm getting a new one today, i haven't synced this one with itunes, is all my data backed up on icloud? so i can access all my contacts and photos through icloud on the new device?

Welcome to the Apple community.
If you have been previously using iCloud with your old phone, then when you login to your iCloud account with your new phone all the data from the services you were using will be added to your new phone.

If I have a lot of progress in a game on my iPod, but it dies and I get a new one, is there a way to transfer the data?

If I have a lot of progress in a game on my iPod, but it dies and I get a new one, is there a way to transfer the data? I've been playing a cool game for a while, but I think it might be time to get a new iPod. Is there a way to login with the same gamecenter account, and it will all be on the new iPod? Thx.

App data is not backed up through Game Center, but rather through iCloud. If you have an iCloud backup and you get a new iPod, after your games redownload from the Internet all data within the apps should be preserved.

TS3992 I recently dropped my ipad and had to get a new one. I backed up the first I pad and used the icloud to reload all my data on my new ipad. Now when I go to backup the new ipad it says I cannot because I don't have enough ICloud storage available.

I recently dropped my ipad and had to get a new one. I backed up the first I pad and used the icloud to reload all my data on my new ipad. Now when I go to backup the new ipad it says I cannot because I don't have enough ICloud storage available.

If you can't get the password correct, you CANNOT restore from that backup.
However, if you've been using your phone as recommended by Apple, there should be minimal data loss.
Your iTunes library is on your computer, so you can synch all your apps, music, movies, ringtones, etc, on to your new phone.
Similarly, contacts should be synched to Address Book, Outlook, or a cloud service for you to easily synch back to your new phone.
Pictures taken from your old phone and not synched to your computer are lost, but you would have been synching those photos to your computer frequently as recommended. Other photos that you synch TO your iPhone are still on your computer.
You won't be able to get text messages back.

How can i get the date of the last update of one PL/SQL package ?

Hello,
How can i get the date of the last update of a PL/SQL package
named MYPACKAGE ?
Thanks in advance ! ;-)

to get the timestamp,last ddl time of object
select timestamp,last_ddl_time from user_objects
where object_name='<package name>';
this will give you last transaction time ,date of object

Loading data one year at a time

Hi,
We have a situation where we need to load data one year at a time. I saw this done a few years ago but do not remember the details.
What I am thinking is that we could initially run a full load with the following parameters:
$$ANALYSIS_START: 1/1/2006
$$ANALYSIS_START_WID: 1/1/2006
$$INITIAL_EXTRACT_DATE: 1/1/2006
$$ANALYSIS_END_WID: 1/1/2006
And this should give us one year. What I am not sure about is how to load each subsequent year???
Regards

Is the issue a performance issue (ETLs running for too long)? The problem is that if you do Year by year..and you want to do a "incremental" load for each year, that would be even more of a load..since you are not allowing for BULK load (where the tables get truncated). Either you can truncate and do BULK or incrmental..which may be an even heavier load. I think you are assuming that this approach will somehow help you from a hardware limitation standpoint..do you know for sure that it will?
If you really do want to do it, as I mentioned, you can edit the INITIAL and END parameters. It would help if you clarify the Hardware limitation...I think there are better ways to handle this than to do what you are doing.

When I use Home sharing, I can see the library I want to copy, but when I highlight the library, the import button does not show up. Also, it will not let me drop and drag. How do I get music from one computer to the other computer?

When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?

Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data.

Hi everyone, I have a computer linked to my iPAD through itunes. Then my Computer crashed and had to get a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP :(

Hi everyone, I have a computer linked to my iPAD through itunes. Then my Computer crashed and had to get a new one. How do I get rid of the old computers link on ipad and get it on new computer bcos is wont work! (doesn't work) PLZ HELP

what do you mean the old computers link?
my ipad is sycned with my computer but nowhere is there a link
and if I connected it with a new computer and set it to sync it would replace all my data with the data from the new computer

My iphone3g its ben having a lot of problems i it will not lock i open a game and it will go to im ipod im probly going to get a new one but i would like to know what is rong

my iphone3 its ben havin g a lot of problems it will not lock i open a game and
it will go to ipod im going to get a new one but i would like to know what is rong with it

Yeah, and it didn't work.
I had problems when I updated to iOS 5 (lost all my apps - a few of my friends had the same problem) and when there was an update to iOS 4 (camera wouldn't work). The iOS 5 issue was sorted by backup (but I lost the app data) but for the iOS 4 issue I had to return my iPod to get a new one.

Hot to get successive data one by one

Similar Messages

Maybe you are looking for