HotNews correction for Y2010 spool request error available

Dear gurus,
I became aware of [SAP Note 1422843|https://service.sap.com/sap/support/notes/1422843] which has affected all my systems's spool request reorg jobs.
It is currently release and patch level independent, so you will all be affected by it as well.
You can verify this via entries in table SP01 field RQDELTIME = 2099*
As a kernel patch might take a while (also to download, install, test, etc...) there is a workaround attached to the note until you get there.
Cheers and best wishes for the new years until 2099..
Julius

> ...and the variant provided in this note 1422843 doesn't clean at all....
Yes, it does not "clean" the spool requests out of the system - it corrects the deletion date symptom so that your reorg job will pick them up again. Dependent on your config, this might take a few days to become "cleaned", as they were before as well.
Another option is to reorg the spool requests based on the creation date alone. This works fine for "smaller" systems and will protect the spool overflow and number range problem. It will however not correct the other less critical symptoms, so applying the kernel patch at some stage soon is recommended anyway.
Cheers,
Julius

Similar Messages

Handle not valid for open spool request

Hello everyone,
i am facing an error while clicking the print preview option in change PO (me22n).
i have given the dispatch time in further data of o/p as 'Send with application own transaction'.
now, when i save and click print preview button i get an error as
"Handle not valid for open spool request"
Kindly give me some idea how to tackle this.
Thanks
gaurav

Gaurav,
I am having a similar issue and would appreciate if you could let us know how your problem was solved?
What control parameters did you change to make this work?
Thanks,
Jay

Spool request Error

HI Experts,
MOst of the time Users encounter Spool Request Error while giving printouts. So for that Ihave to manualy delete sppol requests from SP01. Is there any where I can Schedule Programm where I set parameters to delete spool requests before reaching its maximum limit. Urgent.
Thanks.
Khan

Hi Khan,
Try this FM RSPO_R_RDELETE_SPOOLREQ.
Have a look in this post
How I set the auto delete old spool request
Regards,
Satish

Long time for generating spool request for smartforms

Hi,
I'm have designed a smartforms for printing a Receipt form. It takes about 1 minute for generating spool request after pressing the PRINT button in PRODUCTION Server only.
The Code i used is below
CALL FUNCTION lv_fname
EXPORTING
      p_belnr                    = p_belnr
      p_bukrs                    = p_bukrs
      p_gjahr                    = p_gjahr
EXCEPTIONS
   formatting_error           = 1
   internal_error             = 2
   send_error                 = 3
   user_canceled              = 4
   OTHERS                     = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please help me out to sort this issue.
Thanks,
Ramesh
Edited by: Rameshkumar Raamasamy on Mar 4, 2012 6:21 AM

Hi Rameshkumar,
you may look at the code sections of your smartform: If you have a lot more data in production than you have in development, it is especially important to use a fully specified primary key for any SELECTs.
You may also ask your basis people to check if any performance warnings have been recorded with database system. This happens quite frequently that growing database tables cause problems when table spaces are not properly assigned or table sizes are not maintained adequately.
Regards
Clemens

Spool request error in downloading 4000 pages

Hi all
I have a small doubt regarding the spool request.
In my scenario I am running the transaction FBL3N
in the background and I am getting an output of around 4000 pages.
I need to download it but my Spool request contains only 10 pages
by default.
I changed it to 4000 but it gives the error of memoryoverflow.
I could work by dividing the file into parts say 500 or 1000 but
is there any way out so that I could download all the pages in
one go.
Hope you ppl have got me.
Please respond asap.
Thanks in advance.
Sumit

hi,
you can divide data into different spools in following way:
call function 'GET_PRINT_PARAMETERS'
      exporting
        destination    = 'LOCL'
        copies         = count
        list_name      = 'TEST'
        list_text      = 'Test for multiple spools'
        immediately    = ' '
        release        = 'X'
        new_list_id    = 'X'
        expiration     = days
        line_size      = 79
        line_count     = 23
        layout         = 'X_PAPER'
        sap_cover_page = 'X'
        receiver       = 'SAP*'
        department     = 'System'
        no_dialog      = 'X'
      importing
        out_parameters = params
        valid          = valid.
   IF VALID eq SPACE.
      new-page print on parameters params no dialog.
   endif.
writes data into spool 1.
new-page print off.
      new-page print on parameters params no dialog.
write into spool 2.
new-page print off.
thanks,
anupama.

Submit for a spool request

Hi friends,
i have three programs Y, Y1& Y2.
     in 'Y' program i have a submit statement
            SUBMIT 'Y1' TO SAP-SPOOL
              AND RETURN
              WITH SELECTION-TABLE SELTAB
              IMMEDIATELY ' '
              SAP COVER PAGE ' '
              COVER TEXT 'xxxx - Auto Payment Summary'.
    in 'Y1' program i have a submit statement
          SUBMIT 'Y2' TO SAP-SPOOL
                AND RETURN
                WITH SELECTION-TABLE SELTAB
                IMMEDIATELY ' '
                SAP COVER PAGE ' '
                COVER TEXT 'YYYY - Auto Payment Checksum'
SUBMIT (PAYPROG) WITH SELECTION-TABLE SELTAB
       WITH PAYDET = PAYDET
       EXPORTING LIST TO MEMORY
       AND RETURN.
SUBMIT (WTXPROG) WITH SELECTION-TABLE SELTAB
      EXPORTING LIST TO MEMORY
      AND RETURN.
if i need to skip the first spool request and the file should not be generatedfor first spool is it possible, how please reply soon.
advance thanks to all.

Just refer:
HOw to generate spool request for alv report

Graphical Display of spool Request Errors

HI,
Can someone help me where I can find the more details for the following processing Category when we graphical display of spool request in SM37
1) Not Relevant
2) Inappropiate Status
3) Error

Useful for background
http://www.sappoint.com/basis/bckprsng.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6f/08703713bf277ee10000009b38f8cf/frameset.htm
http://publib.boulder.ibm.com/infocenter/wbihelp/index.jsp?topic=/com.ibm.wbix_adapters.doc/doc/mysap4/sap4x41.htm

Enquiry Spool Request Error

Greetings.....
During T code of VA11 (change Enquiry ) while issueing OUtput , i m getting the error as '
Value of spool attribute cannot be changed.
Message no. SSFCOMPOSER033
Diagnosis
The spool attribute has the value . This cannot be changed within the spool job. You tried to change the value in .
System Response
Error message.
Procedure
Do not change the value of this attribute.
Please suggest How to resolve it ..............

Dear PP,
Please consult with your BASIS-ADMIN; as this is not an SD-Error.
Alternatively, You may post your query in to:
[Forum: SAP NetWeaver Administrator|SAP NetWeaver Administrator;
Best Regards,
Amit

Print preview for the spool request without actual printer hooked u to SAP

Hi,
We do not have any printer connected to SAP system. But the business team just wants to do print preview of a document using the SAP local printer settings thorough SP01. They do not want to print it.
They say that SAP has many printer drivers in its setting. So even if the printer is not attached they should be at least able to do a print preview ?
Is this possible ? What do I need to do ?
Regards,
Rajesh.

Rajesh Thomas,
the preview function needs a printer - for whatever reason.
If NO printer is defined in the system, someone should be able to set up a printer, i.e. locl with driver SAPWIN. Try.
Regards,
Clemens

Is there any FM to generate spool request for error log of a background job

Hi,
I am going to create a program to create deliveries and do PGI. This program will be assigned to periodic background job.Now whatever errors are generated in program i have to send the error log to spool request.Is there any FM for generating spool request with this error log or how can this be done? Kindly provide sample code if possible.
Thanks.
Nimish Dongare.

Hi Nimish,
How are you doing, This is Shreekant working as ABAP developer, I sow your post in sdn forum, I have a similar requirement like I am changing the delivery taking some data from a flat file which is coming from other system and do PGI. If any error occurs during this process I need to capture it and present it as a report or create log file.. whichever is easier.
Please can u help me how did u achieved this functionality for your requirement?.. pls. can u share some details.
If u don mind, can u give me ur email id to communicate.
Thanks,
Shreekant

How to print Spool requests for cheque printing sequentially

Dear All,
I am making vendor payments and printing cheques using F-58. It automatically creates a spool requests at the end of the transaction. When i complete all my payments and go to SP01 for viewing spool requests, the last request appears at the top of the list.
If i select 3 consecutive requests and print them at a time, the last request gets printed first on the first cheque number and the first request gets printed on the last cheque number.
This results in anomaly in the cheque number assigned in the system and the printed cheque as the last payment is printed on the first cheque.
I am using dot matrix printer with page format fixed for cheque specifications. The cheques are printed properly as per the format except the order of printing.
Kindly let me know how to print multiple requests sequentially from the spool requests list such that the spool request number printed matches with the serial cheque numbers.
Regards,
SAP_2009

Hi,
I understod your issue.
Whenever you posted multiple payment documents, and after that if you want to take cheque printouts sequentially by using more spool requests.........there is a way to sort out this issue.
1) Select all of your spool requests and click on Sort in ascending Order (CtrlShiftF5) and click on Print directly (CtrlShiftF8). By doing this you will get the cheque printouts sequentially according to your payment document sequence.
Hope this will help you
Assign ********, if it solved your problem.
Thanks,
Srinu

Creation of Spool Request

Hi All,
System is not creating the spool request for the background job. Two days before the job was running correctly generating the spool request. When I checked today..system is not creating the spool request..
There is no changes in the authorization profile of the user-id. Also no changes in the program were made. So what may be the possible reason for system not creating the spool. There are entries which suits the condition for the creation of spool.
Thanks in Advance....

Hi,
It could be a number ranges issue, please check trx. SNRO and see if the number ranges are specified as correctly, otherwise please extend, And also check if the batch Job 'SAP_REORG_SPOOL' is running to clear the spool requests which are already being processed, Job 'SAP_REORG_SPOOL' has to run on daily basis. Hope this will solve the issue.

Deleting spool requests automatically

Hi
We are on R/3 4.7 Enterprise Extn Set 110. I would like to ensure that spool jobs which have printed successfully be deleted automatically. I need some help in getting this done.
There are some places where I could configure this however I was not sure which would work.
SU01 / Defaults / Spool Control / Delete After Output
SPAD / Admin / Settings / Admin / Automatically delete old spool requests. This has a time limit whic I can set. For instance All .... h
SP01 / Spool Requests / Select Spool Request / Request Attributes / Spool Attributes / Delete After printing after no errors.
To me the third one (from SP01) seems just right. But SP01 would show up requests which only belong to me. I would like to ensure that this works for every spool request for every user. How do I go about this? Does this have to be done in IMG? if so how?
thanks
ravi

You need read the Note 16083 - Standard jobs, reorganization jobs
the SAP_REORG_SPOOL job, also read
Note 130978 - RSPO1041 - Replacement for RSPO0041
About :
But SP01 would show up requests which only belong to me
dear cleare your user name in Created By and after execute, you will see all in past day , or selected period (it works in ECC, i do not know how it works in 4.7, but i'm think it's are same).
Regards.

How to control automatic deletion of spool requests while check printing

hi friends
When i do cheque payment run (F-58), my spool getting deleted after printing. In my User setting SU01,
Delete after output is not selected, still it is getting deleted from spool. We have informed users to uncheck this option once the spool request is created at the end of this run. But our users feel there should be some way to disable/uncheck or save this option automatically rather than changing each spool request settings everytime the posting is run.
Please could you suggest me how to disable/uncheck this option 'Delete after printing if no errors' permanently. I have done the necessary settings in user master record but still it's the same.
please advice.
Regards,

Hi Nathan,
Solution is only to maintain in SU01 , its picking from there only.
May be your user needs to log-off once status is changed in SU01, ask him to check what it is showing for him in SU3.
So if you deactivate option in SU01/SU3 , it should work as same is working in our environment.
You can test yuorself using below steps
1) Login with your ID , create one spool request
2) check the status in SP01 and check if its ticked or not
3) change the tick mark in SU01 , logoff. and login again .
4) create another spool request
5) check status now for new spool request in SP01 and check if it is ticked.
Regards,
Edited by: Gagan Deep Kaushal on Oct 31, 2010 5:00 PM

Convert Spool request to PDF and send as e-mail

Hi all,
Can any one please provide me a sample code for converting spool request to pdf?
Thanks in advance,
Suneela.

HI,
Try this
Hi all,
Can any one please provide me a sample code for converting spool request to pdf?
*& Report ZSPOOLTOPDF                                                 *
*& Converts spool request into PDF document and emails it to           *
*& recipicant.                                                         *
*& Execution                                                           *
*& This program must be run as a background job in-order for the write *
*& commands to create a Spool request rather than be displayed on      *
*& screen                                                              *
REPORT zspooltopdf.
PARAMETER: p_email1 LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_sender LIKE somlreci1-receiver
                                    DEFAULT '[email protected]',
           p_delspl AS CHECKBOX.
*DATA DECLARATION
DATA: gd_recsize TYPE i.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
        INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
      wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
      gd_eventparm LIKE tbtcm-eventparm,
      gd_external_program_active LIKE tbtcm-xpgactive,
      gd_jobcount LIKE tbtcm-jobcount,
      gd_jobname LIKE tbtcm-jobname,
      gd_stepcount LIKE tbtcm-stepcount,
      gd_error    TYPE sy-subrc,
      gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject   LIKE sodocchgi1-obj_descr,
      it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_sender_type     LIKE soextreci1-adr_typ,
      gd_attachment_desc TYPE so_obj_nam,
      gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
      gd_destination LIKE rlgrap-filename,
      gd_bytecount LIKE tst01-dsize,
      gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
        INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
           c_no(1)     TYPE c   VALUE ' ',
           c_device(4) TYPE c   VALUE 'LOCL'.
*START-OF-SELECTION.
START-OF-SELECTION.
Write statement to represent report output. Spool request is created
if write statement is executed in background. This could also be an
ALV grid which would be converted to PDF without any extra effort
WRITE 'Hello World'.
new-page.
commit work.
new-page print off.
IF sy-batch EQ 'X'.
    PERFORM get_job_details.
    PERFORM obtain_spool_id.
Alternative way could be to submit another program and store spool
id into memory, will be stored in sy-spono.
*submit ZSPOOLTOPDF2
       to sap-spool
       spool parameters   %_print
       archive parameters %_print
       without spool dynpro
       and return.
Get spool id from program called above
IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
    PERFORM convert_spool_to_pdf.
    PERFORM process_email.
    if p_delspl EQ 'X'.
      PERFORM delete_spool.
    endif.
    IF sy-sysid = c_dev.
      wait up to 5 seconds.
      SUBMIT rsconn01 WITH mode   = 'INT'
                      WITH output = 'X'
                      AND RETURN.
    ENDIF.
ELSE.
    SKIP.
    WRITE:/ 'Program must be executed in background in-order for spool',
            'request to be created.'.
ENDIF.
      FORM obtain_spool_id                                          *
FORM obtain_spool_id.
CHECK NOT ( gd_jobname IS INITIAL ).
CHECK NOT ( gd_jobcount IS INITIAL ).
SELECT * FROM tbtcp
                 INTO TABLE it_tbtcp
                 WHERE      jobname     = gd_jobname
                 AND        jobcount    = gd_jobcount
                 AND        stepcount   = gd_stepcount
                 AND        listident   <> '0000000000'
                 ORDER BY   jobname
                            jobcount
                            stepcount.
READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
IF sy-subrc = 0.
    message s004(zdd) with gd_spool_nr.
    gd_spool_nr = wa_tbtcp-listident.
    MESSAGE s004(zdd) WITH gd_spool_nr.
ELSE.
    MESSAGE s005(zdd).
ENDIF.
ENDFORM.
      FORM get_job_details                                          *
FORM get_job_details.
Get current job details
CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
       IMPORTING
            eventid                 = gd_eventid
            eventparm               = gd_eventparm
            external_program_active = gd_external_program_active
            jobcount                = gd_jobcount
            jobname                 = gd_jobname
            stepcount               = gd_stepcount
       EXCEPTIONS
            no_runtime_info         = 1
            OTHERS                  = 2.
ENDFORM.
      FORM convert_spool_to_pdf                                     *
FORM convert_spool_to_pdf.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
            src_spoolid              = gd_spool_nr
            no_dialog                = c_no
            dst_device               = c_device
       IMPORTING
            pdf_bytecount            = gd_bytecount
       TABLES
            pdf                      = it_pdf_output
       EXCEPTIONS
            err_no_abap_spooljob     = 1
            err_no_spooljob          = 2
            err_no_permission        = 3
            err_conv_not_possible    = 4
            err_bad_destdevice       = 5
            user_cancelled           = 6
            err_spoolerror           = 7
            err_temseerror           = 8
            err_btcjob_open_failed   = 9
            err_btcjob_submit_failed = 10
            err_btcjob_close_failed = 11
            OTHERS                   = 12.
CHECK sy-subrc = 0.
Transfer the 132-long strings to 255-long strings
LOOP AT it_pdf_output.
    TRANSLATE it_pdf_output USING ' ~'.
    CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
ENDLOOP.
TRANSLATE gd_buffer USING '~ '.
DO.
    it_mess_att = gd_buffer.
    APPEND it_mess_att.
    SHIFT gd_buffer LEFT BY 255 PLACES.
    IF gd_buffer IS INITIAL.
      EXIT.
    ENDIF.
ENDDO.
ENDFORM.
      FORM process_email                                            *
FORM process_email.
DESCRIBE TABLE it_mess_att LINES gd_recsize.
CHECK gd_recsize > 0.
PERFORM send_email USING p_email1.
perform send_email using p_email2.
ENDFORM.
      FORM send_email                                               *
--> p_email                                                       *
FORM send_email USING p_email.
CHECK NOT ( p_email IS INITIAL ).
REFRESH it_mess_bod.
Default subject matter
gd_subject         = 'Subject'.
gd_attachment_desc = 'Attachname'.
CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
it_mess_bod        = 'Message Body text, line 1'.
APPEND it_mess_bod.
it_mess_bod        = 'Message Body text, line 2...'.
APPEND it_mess_bod.
If no sender specified - default blank
IF p_sender EQ space.
    gd_sender_type = space.
ELSE.
    gd_sender_type = 'INT'.
ENDIF.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_mess_bod
                                      it_mess_att
                                using p_email
                                      'Example .xls documnet attachment'
                                      'PDF'
                                      gd_attachment_name
                                      gd_attachment_desc
                                      p_sender
                                      gd_sender_type
                             changing gd_error
                                      gd_reciever.
ENDFORM.
      FORM delete_spool                                             *
FORM delete_spool.
DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
ld_spool_nr = gd_spool_nr.
CHECK p_delspl <> c_no.
CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
       EXPORTING
            spoolid = ld_spool_nr.
ENDFORM.
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables it_message
                                          it_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
data:   t_packing_list like sopcklsti1 occurs 0 with header line,
        t_contents like solisti1 occurs 0 with header line,
        t_receivers like somlreci1 occurs 0 with header line,
        t_attachment like solisti1 occurs 0 with header line,
        t_object_header like solisti1 occurs 0 with header line,
        w_cnt type i,
        w_sent_all(1) type c,
        w_doc_data like sodocchgi1.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
Reward points if found helpfull....
Venkoji.

HotNews correction for Y2010 spool request error available

Similar Messages

Maybe you are looking for