How BAPI/RFC canbe seen in other SAP systems
Hi
Howcan BAPI/RFC of R/3 system be seen in different SAP systems such as BW/CRM .
regards
Supern
Hi,
You can use them from other systems if they are set to be <b>REMOTE-ENALED</b>. This can be done from the tab Attributes in the function module maintenance. You will create the function module exactly the same as if it would be used in one system. If you want to use it from another system like BW, you need to add DESTINATION parameter when calling the function module. DESTINATION defines the RFC of the source system, this tells BW where the fm you are calling is setting.
Ex, if you have defined fm Z_BW_READ_R3_TABLE in R/3 system, you can call from BW using below code:
CALL FUNCTION 'Z_BW_READ_R3_TABLE'
DESTINATION r3_rfc_dest
* EXPORTING
TABLES
INT_ITAB = INT_ITAB1.
Similar Messages
-
Calling RFC function module in other SAP system...
Hi,
I have a report on one SAP system and a function module on other system. The function module is RFC enabled. How can I call this RFC enabled function module from other SAP system in the report which is different SAP ?
system.
Thanks.
Regards,
Rajesh.call the function module in orginal system in se38 ,copy the function module ,paste the function module in other system,and maintain destination here ,otherwise you will get short dump.
here detination should be SM59 destination,this is case sensitive.
Reward Points if it is helpful
Thanks
Seshu -
How to call WDA Application from an other SAP System
hello all,
I have a WDA Application and if the user click on a Button in this Application, i need to call an other WDA Application from an other SAP System.
example: SYStem X01 has a WDA Application and there is a Button in this Application, if the User click on this Button, a WDA Application from an Other System X09 shoud be displayed in the same window, same WDA IFRAME .
can any one tell me how can I do this?
Thank you allHi,
As mentioned earlier, you need to pass the host name and port of the second system. If the application name is same, pass the same application name.
DATA: lv_url TYPE string,
lv_host TYPE string,
lv_port TYPE string,
lv_protocol TYPE string.
CALL METHOD cl_wd_utilities=>construct_wd_url
EXPORTING
application_name = 'ZWD_APPL_NAME'
in_host = lv_host " host name of second system (X09)
in_port = lv_port " port of second system
in_protocol = lv_protocol " protocol of second system
* in_parameters = lt_parameters
namespace = 'sap'
IMPORTING
out_absolute_url = lv_url.
To get the Host, Port and Protocol of second system, wrap the below code in a Function Module(RFC) in X09 and call this in X01 and then pass them to the cl_wd_utilities=>construct_wd_url as mentioned above
CALL METHOD cl_http_server=>if_http_server~get_location
IMPORTING
host = host
port = port
out_protocol = out_protocol.
hope this helps,
Regards,
Kiran -
How to find the list of different material in other SAP system.
We have two SAP different systems. there is an integration between two systems.
One system has 2 millions materails (parts) and other system has 6 millions materails (parts).
I need to know the list of what are those 4 miilions of materials in the other sap system .
How can I find out the list of the 4 millions additional material list ?
Can you please help me .
YOUR HELP WILL BE HIGHLY APPRECIATED.
Thanks in advance.Hi,
Compare two different environments/systems in t.code: SCU0 . Also you can try with OY19
Regards,
Biju K -
How to add other SAP systems in CCMS ALE Monitoring
Hi all, how do I add other SAP systems to be ALE monitored centrally in the PI system?
I want to monitor the Idocs in the SAP R/3 system centrally in PI with CCMS. Default is only ALE for the PI system itself.You can add additional systems to CCMS quite easily.
I would recommend this to be done in Solution Manager though!
http://help.sap.com/saphelp_nw04s/helpdata/en/c8/40a442b024b211e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/90/4e313f8815d036e10000000a114084/frameset.htm
Also, search Google for SAP CCMS Central monitoring. -
How to copy a structure from one SAP system to other SAP system in ABAP
Hi All,
We have a requriement where need to copy an strcture of 250 feilds from on SAP system to other SAP system , do any one know how to do it .
Regards
ChannuChannappa,
It is really not hard to manually create the structure. Ctrl-Y copy from the source system screen and paste in the target system screen. You'll have to do this one page at a time. So, you will have to repeat it 9 times (or 18 times if you have to copy/paste component list and type separately).
I can assure you that you can finish the task in less than 30 minutes. -
How to copy role from R/3 to BW and other SAP systems
hello all,
I have created a role in R/3 dev systems, Now the requirement is I have to create same role in BW, GTS etc
Is there a way I can copy or transport the request from R/3 dev to other SAP systems. I am asking this becuase this role is kinda messy with lot of auth objects and it will take me lot of time to create it fresh in other systems.
Thanks in advanceYou can transport the role ur use download/upload. You reach all of these function in the menu on the entry screen of transaction PFCG.
Kind regards
Frank Buchholz -
Accessing data from other SAP system
Hi experts
I need to access data from one SAP system from other. My requirement is , perform applications (programs) in some SAP system, but using/accessing data from other SAP system .
For example, when we press F4 we get the match code (search help) for the field ; that window is alredy created by SAP and it shows the data for that field . Of course the application (ike any other program/application) read the data from the SAP system is being executing ; well i need execute that match code but show (taking) the data from other SAP system; i not refer to other MANDT in same system but other SAP system.
The communication between SAP1 system and SAP2 system is already created from BASIS.
My doubt is how can i execute that standard application (search help) but 'invoke' to standard application this take data from other system ?
I guess i can create Z search help wich call a Z Function (RFC) to get the data required from the other system ;
or maybe enhance the standar search help to call that Z RFC ; but standard application search help is already created and this access the data in several ways or places of code , and this has severals sub-windows and search features ; and i just need execute exactly same search help but accesing data from the other SAP system ; so my doubt is, is there some way to indicate to SAP the applications always (wherever) these applications acces the data do it but from other SAP system,
like if we 'redirect' the Data Base to other SAP system.
SAP1 applications are being executing -
> but all data (records) are taking from SAP2
Maybe the first suggestion is simply why do not we execute applications in SAP2 instead SAP1 , that's because the version package in SAP2 system (where we have the data) does not support some (non SAP) applications we need to use.
Excuse the long thread. Does somebody can help, any idea ?
Best Regards
FrankHi Frank,
Below are my thoughts, these are only conceptual and haven't had an opportunity to try these possibilities, also not sure if this is the right thing.
1) Create an entry in DBCON using TCode: DBCO for the Database of system SAP2. Now in the application of SAP1 use the "SET CONNECTION" construct as the very first statement, so that consecutive SQL statements will point at the DB of SAP2.
2) I have read somewhere that the Work Processes are connected to the Default database and i am not sure if you can change this setting, but if you can and provided you have have multiple application servers in your SAP1 landscape, then pick one of the application servers and change the settings on the WP to point at the DB of SAP2, you have the end users login to this particualr app server.
3) If there are multiple app servers in SAP1 landscape, then choose one of the app servers and change the default database setting to point at DB of SAP2.
Regards,
Chen -
The webdynpro/ABAP (WDA) calling RFC enabled FM of other ECC systems
The webdynpro/ABAP (WDA) has problem calling RFC enabled FM of other ECC systems.
WDA expects all the ABAPs, RFC FMs of remote system(DEV, QA..) to reside inside its own instance.
It is hard to transport and maintain these ABAPs FMs into a portal ABAP WDA instance.
Proxy generation at WDA client:
=======================
1. If we can make an XI enable an ABAP or RFC enabled FM of the remote ECC,
I think the XI proxy classes can be generated at the client WDA system.
Other options?
How do I do it? Can you give some tips.
2. How do I manually code the RFC Call to BAPI/FM from Webdynpro controller or other interface?
I am stuck with the above as the webservice option is not available at our ECC server. It does not have a java engine installed for webservice to be available.
Can you help on the above 2 options?Hi Mike ,
<b><b> Answer of 2.</b></b>
How do I manually code the RFC Call to BAPI/FM from Webdynpro controller or other interface?
I am doing same thing for my current SRM implementation.I am taking data to SRM server from another R/3 server .
This is solution I have used
1) First of all I have made ABAP connection in SM59 .
Go to SM59 .In ABAP Connection creat ABAP connection with system with which u want communicate .
Eg I am connection with Systems PB1.
So i developed Connection call PB1CLNT800.
2) In my requirement I have taken data in my context from another r/3,
I have give called RFC in my supply function of node.
Call to RFC is as usual.
In my case,
CALL FUNCTION 'RFC_MATNR'
DESTINATION 'PB1CLNT800'
TABLES
IT_MATNR = IT_MATNR.
Onwards I have read my itab IT_MATNR and populated data to context.
Hope solution will serve your purpose.
Give point if it works .If any problem i have other ways.
Cheers
Parry B -
CRM_Order_maintain not wortking from other SAP system
Hi ,
we need to change the msg partner for a support desk msg from webdynpro application.for that we are creating a custom RFC function module, Contains the below coding ,
CRM_ORDER_MAINTAIN
CRM_ORDER_SAVE
BAPI_TRANSACTION_COMMIT
It is successfully changing the business partner ( msg processor ) in the support desk msg . But if we call this function module from webdynpro it is not creating as such.
what could be the reason .
____________ we checked the following
1. we called the RFC from other SAP system . it is not working .
2. we debugged that RFC from R/3 , we found the difference. For the below functional module is not returning any events from R/3 . whereas if we run the FM from solution manager it is exporting events .
CRM_EVENT_PASS_INFO_EXE_OWHi,
Did you solve this issue?? if you do? how you do it?
thanks in advanced. -
Call rfc sender adapter from non-sap systems
Hi,
is ist possible to connect to an rfc sender adapter from non-sap systems? I want to use the the RFC-Connector from http://rfcconnector.com, but in the client connect options there is no way to specify the program id.
Best regards,
Danielhi,
you don't need to use RFC type T (with program ID) - you can use whole connection string - just like in the example:
http://www.rfcconnector.com/documentation/examples/client/#functioncall
so just specify: host system number etc.
it should work like that - but let me know as I don't know this RFC connector
Regards,
Michal Krawczyk -
How to send IDocs from a non-SAP system to a SAP system
Hi everyone i am new to SAP R/3 System.
Currently i am required to send IDocs from a non-SAP system to a SAP R/3 System.
There is a guide on Cost-Effective and Quick Communication between SAP and 3rd Party Systems using IDOC HTTP XML Interface. But its from a SAP system to a non-SAP system and i am able to do that.
Is there any step by step guide where they teaches you how to send IDocs from a non-SAP system to SAP system via similar method?
Thank You!Hi,
I hope this link may help you......
http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r1/index.jsp?topic=/com.ibm.swg.im.iis.ds.entpak.sapr3.use.doc/topics/c_pack_r3_Introduction.html -
How to batch upload some data into SAP system?
Hi All:
I'm a SAP key user in our company, I want to know how to batch upload master data into SAP system? What t-code we can use for batch input?
Thanks in advance!Hi,
I think at least there are four methods for batch input which you can use in SAP system:
Standard mass change t-code: for example, MM17 for mass change of material master data, you can find the mass change t-code under the relevant function module;
T-code SCAT, you can use to record and generate the simple batch input template, it's easy to use for key user;
T-code LSMW, it's another transaction to generate batch input template, it's often used at the beginning of SAP rollout;
ABAP program, of course, ABAP is a universal tool for everything, you can use ABAP to generate a batch input program to upload data into SAP system as well.
So you had better contact your SAP support department, help you to upload data!
Good luck
Tao -
How to import external Transport request into sap system
Hi Gurus,
I have Transport request in the cofiles and data files into one sap system
how to import those files into another sap system (those are different sap systems)
could u tel anyone any settings is required and how to import Those Transport request.
Any help is appreciated.
Thanks in AdvanceHi Siva,
After copied the datafile and cofile in the target system go to Tcode STMS> select the target system import queue,there you go to menu extras>other request-->add, give the request no and excute it.
It will put the request in the que then you can import it to the target system.
Thanks,
Satyabrat -
How to find time in the existing sap system
Hello all,
How to fine time in the existing sap system;where do find the define time in img;plz help me.
what is the difference between logical system and client?
plz sugest me
thanks in advanceDear Sameer
Go to STZAC where you set Time in IMG.
Thanks
G. Lakshmipathi
Maybe you are looking for
-
I need to know what hardware, if any, I need to do this (airport express?, apple TV?) I simply want to send music from my itunes to 2 different rooms at the same time. Is it possible? I have iphone3, iphone4 and ipad2 if that helps. Also, would I use
-
E-ml or Text a group of people
Does anyone know if the iPhone has the capability to forward to a group rather than picking each person? So just hit the group of peops and send?
-
Ejecting dock problem - hp split x2
not able to eject hp split x2 error ST500LT012-9WS142 some hard disk connected apps running how to handle this...
-
Will it work with iMovie 8.0.6. PANASONIC DVX 100A?
Hello I am bidding on a Panasonic camera PANASONIC DVX 100A. I "heard" that it works with iMovie, BUT, I would like to double check with you on the support board. I thank you all in advance. Xeno
-
Mail and MS Exchange Server - help!
Can anyone tell me the simple way to go from Entourage to Mail 3.0? I work within an MS Exchange environment and I really want to use Mail now (the new version is exactly what I need) but my IT dept tell me integrating Mail and Exchange is impossible