How BPEL call an OWSM managed web services ?

Hello All,
I meet a case like this.
I defined a web services( WS1), and build a BPEL process(BP1) to call WS1, then security BP1 by OWSM. When I want to call BP1, I included WS-Security in header, and put username and password there. It works fine.
The I security the WS1 by OWSM ( Customer Requirement), then build another BPEL process(BP2) to call WS1. I also included WS-Security in header, and put username and password there. But it does not work and has Client.authenticationFault.
I have checed OWSM document, but could not find valuable information about this.
Anyone can help?
Thanks and regards,
Michael

I successfully tested a scenario similar to yours. For that you may need to apply some patches. Here is what I successfully tested
Client -> WSSE Headers -> BPEL -> HTTP Headers -> OWSM managed service
Client -> HTTP Headers -> WSM service -> WSSE Headers -> BPEL -> HTTP Headers -> service
Only thing I came to know lately is based on BPEL invocation binding you have to specify inbound credentials to BPEL so that you can propagate them to invoked partnerLinks.
SOAP Binding -> use WSSE Heders to invoke BPEL
HTTP Bindig -> use WWW-Authenticate headers
Java API inoke -> use java properties
Can you elaborate more on your scenario.
Regards,
Rajesh

Similar Messages

  • How to call a secure external Web Service using Oracle BPEL and OWSM

    Hi,
    i have to invoke an external secure Web Service using SOA Suite 10.1.3.1, but i don´t know how to do this. Do i use OWSM gateway or Agent? how to configure the gateway or agent to pass the required security to the external secure web service.
    thanks in advance
    Dong

    Are you getting any errors? What type of XAI Class are you using?
    One thing I've noticed is that if you are making changes to the XAI Sender you will have to restart the environment before the changes can take effect.
    Also, if you are using RTHTTPSNDR as XAI Class you may have to include the HTTP Method - Post in the context.
    Hope this helps.
    Regards,
    Philip

  • How to call an ABAP based web service from a web page (form)

    Hi,
    I am trying to figure out how I can call my own developed ABAP based web service. I was able to successfully test it in the WS navigator and am now wondering what I need to do to embed the service call in a plain simply web page (form). Basically I'd like to create a web form allowing to specify the parameters and with a 'Submit' button pass the parameters to the web service and launch it.
    Is this possible or do I need some kind of SDK to accomplish this?
    Thanks for any hints and tips.
    Wolfgang

    Hi,
    refer the following link and this is for cosuming the web service form Web dynpro Java
    https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50d70a19-45a3-2b10-bba0-807d819daf46&overridelayout=true
    and please go throught the following link if you want to cosume it through web dynpro abap and find the answer given by the Moderator Thomas Jung
    regards
    Manohar

  • How to call java function through Web Service

    Hello Experts,
    I want to call a method through Java Web Service in my abap code. Is it possible ? If so, plz guide me.
    Requirement: In SD module user enters the PAN, on after entering PAN in want to validate it on NSDL. For that a Web Service has already been deployed on a Web Server. and that the deployed Web Service I want to call in abap code.

    Hi,
    check this link
    Re: Call to WS from one backend to other backend
    regards
    afzal

  • How to call java fanction through Web Service

    Hello Experts,
    I want to call a method through Java Web Service in my abap code. Is it possible ? If so, plz guide me.
    Requirement: In SD module user enters the PAN, on after entering PAN in want to validate it on NSDL. For that a Web Service has already been deployed on a Web Server. and that the deployed Web Service I want to call in abap code.

    Hi,
    check this link
    Re: Call to WS from one backend to other backend
    regards
    afzal

  • How to call Axis 2.0  web service without wsdl

    Hi,
    Is it possible that I can call Axis 2.0 asynchronous web service in orabpel without wsdl.? As Axis 2.0 is not generating wsdl file.
    Regds,
    Farooq

    A Web Service without a WSDL describing it??? Seems like a contradiction to me...
    Are you 100% sure about this? I am not an Axis expert, but this sounds strange.

  • How to call OWSM secured web-service from ADF application

    I have a OWSM secured web-service, which takes username/password.
    I want to invoke this webservice from ADF application. ADF application has its own security and it takes its own username/password. End user can't provide the username/password for web-service call. My ADF application should call the webservice and provide it appropriate username/password.
    What is the best practice to handle such scenario. I don't want to hardcode username/password in Java (ADF) code.
    Thanks
    Sanjeev.

    it is not clear to me if you are having problems with calling java code from OIM or if the problem is the web service API.
    Lets do some divide and conquer:
    Can you create a simple java class that just writes a couple of lines to the log? Please attach this code to the OIM task and make sure it runs.
    Once this works we can start looking at the web service call.
    Best regards
    /Martin

  • How to deploy JAR as a Web Service

    Hi,
    I am new to BPEL and interested in building Web Services using BPEL. For this I am using Oracle BPEL Process Manager(JDeveloper).
    I have a standalone Java application (which I run from command prompt) and ant script which generates the JAR file. Can I deploy this JAR as a web service using Oracle BPEL.
    I have seen the examples given by Oracle BPEL and it was mentioned that using WSIF we can create WSDL file for our java class and call this WSDL as a partner link in my BPEL process. But how should I replicate it to my application.
    Can you please direct me in proceeding further.
    Thanks
    /Kiran.

    Hi,
    This is a forum for BI Beans questions - your question seems to be purely related to ADF and BC4J, not to BI Beans..

  • 401 Unauthorized Error When calling a SharePoint REST web service from SharePoint 2013 Workflow

    We have our Workflow Manger installed on the same server as our SharePoint 2013 WFE development environment. When creating a SharePoint 2013 Workflow all Calls to a SharePoint 2013 REST web service results in a 401 Unauthorized error.
    As an example I created a simple workflow that should return a JSON result. The REST Url returns the results in the browser without error.
    Set Variable:webServiceUrl to https://<hostnamedsitecollection>/_vti_bin/client.svc/web/lists/getbytitle('ISR%20Approvers')/Items?$select=Title&$filter=Title%20eq%20%27General%27
    then Build{...} Dictionary (Output to Variable:requestHeaders)
    then Call [%Variable:webServiceUrl%] HTTP web service with request (ResponseContent to Variable:responseContent |ResponseHeaders to responseHeaders | ResponseStatusCode to Variable:responseCode)
    The RequestHeader is set to the requestHeaders variable though the web service call properties
    then Log Variable:responseCode to the workflow history list
    After manually running the workflow in SharePoint on a list item in the ISR Approvers list it Logs "Unauthorized" in the Workflow History Log. It does this with every SharePoint REST web service call that I have tried through the workflow.
    It doesn't have anything to do with the Workflow Manger being installed on the same machine as the SharePoint WFE does it?
    Thank You for any insight

    Hi,
    According to your post, my understanding is that you had 401 Unauthorized Error when calling a SharePoint REST web service from SharePoint 2013 Workflow.
    Please make sure you use the ‘Call HTTP Web Service’ correctly.
    You can enter the URL into the brower to check whether it is correctly.
    You need to
    create the Request header requestHeaders
    using a Dictionary:
    Accept : application/json;odata=verbose
    Content-Type : application/json;odata=verbose
    To associate the
    requestHeaders variable, select the Call action
    property, set the RequestHeaders property to
    requestHeaders.
    Please refer to the following articles:
    Working with Web Services in SharePoint 2013 Workflows using SharePoint Designer 2013
    Calling the SharePoint 2013 Rest API from a SharePoint Designer
    Workflow
    In addtion, you need to make sure you install the workflow manager correctly.
    More information:
    Install and configure workflow for SharePoint Server 2013
    Known Issues in Workflow Manager 1.0
    Troubleshooting Workflow Manager 1.0 Management and Execution
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • How to consume sap xi pi web services or sap RFC with oracle 11g forms.

    Dear All
    how to consume sap xi pi web services or sap RFC with oracle 11g forms.
    or
    how to config 11g forms with sap xi....
    or how to call sap xi web services in 11g forms....
    or can send sample code....
    Regards
    smfatmi
    Edited by: smfatmi on Oct 17, 2011 2:16 AM
    Edited by: smfatmi on Oct 17, 2011 2:17 AM

    Dear All
    how to consume sap xi pi web services or sap RFC with oracle 11g forms.
    or
    how to config 11g forms with sap xi....
    or how to call sap xi web services in 11g forms....
    or can send sample code....
    Regards
    smfatmi
    Edited by: smfatmi on Oct 17, 2011 2:16 AM
    Edited by: smfatmi on Oct 17, 2011 2:17 AM

  • Index management web service

    Hi im trying to use Index management web service from a Web dynpro
    Have some one any code example  using searchFirstChunkInFolders function?? this function only works in folders indexed by some TREX index??
    Regards

    Hi Subrato,
    in my opinion that's not correct. In fact it's the crawler service itself that needs the internalIndexDocuments() mathod's implementation.
    So if no crawler was assigned to the index, no problem should arise, as no call to this method should occur. On the other hand, the exception is thrown and this meens that the method is indeed called by someone!
    What I can't figure out is which crawler, since none is actually set for that index!
    Cheers, Davide

  • How to call PDF file in Web Dynpro Appl?

    How to call PDF file in Web Dynpro Appl?

    Hi Gobinath,
    1. Create a value attribute of type byte called pdfSource.
    2. Insert an UI element called Interactive Form in your layout
    3. Set the source property of this Interactive From UI element to the context pdfSource.
    4. Insert a button which would open your pdf file.
    public void onActionsubmit(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
        //@@begin onActionsubmit(ServerEvent)
       IPrivate<viewname>.IContextElement contextElement = wdContext.currentContextElement();
             byte[] bytes = contextElement.getPdfSource();
             try
                   File file = new File("C:
    temp
    example.pdf");
                   FileOutputStream os = new FileOutputStream(file);
                   os.write(bytes);
                   os.close();
                catch (IOException e)
                   // do something
                   e.printStackTrace();
        //@@end
    Warm Regards,
    Murtuza

  • How to install and consume GroupWise Web Service (SOAP)

    Hello! I'm Razvan, programmer from Romnia, and I am new to GroupWise development.
    I am asking if anyone could help me with a C# Visual Studio 2010 example of how to install and consume GroupWise Web Service (SOAP).
    The documentation from novell site didn't help me, i didn't understant much of it.
    All I need is either a link to a documented GroupWise C# developer step-by-step tutorial, or some code examples.
    Can you please show me some code examples in C# with:
    1)loging in using a username and a password,
    2)retrieving contact list,
    3)retrieving appointment list,
    4)sending a mail,
    5)setting an appointment
    I don't know how to use "groupwise.wsdl" and customise it so that it points to our GroupWise server.
    Please, I really need this because I am working at a project right now which involves GroupWise integration.
    I hope I haven't disturbed anyone with my simple question.
    I know this might be a very simple question given the complexity of the other posts here, but that's why I really hope I will get an answer soon.
    Thank you very much!
    Signature:
    How old is the Orthodox faith?
    How old is the orthodox faith?

    Just a comment.
    The value for the version element should be "1.02"
    not "1.2".
    Preston
    >>> On Tuesday, March 01, 2011 at 8:06 AM,
    TheRomanian<[email protected]> wrote:
    > I have great news! After strong documentation yesterday and today, I've
    > just made a successfull example that actually connects to our GroupWise
    > server.
    >
    > I made it in PHP.
    >
    > I need an ASP.NET + C# application, but now is very simple to convert
    > it. I post the PHP code here for other people who in future might be
    > interested in finding out.
    >
    > So a simple PHP GroupWise Login code using "groupwise.wsdl" web
    > service:
    >
    >
    > require_once('./GWService/GroupwiseService.php');
    > require_once('FB.class.php');
    >
    > $classmap = array(
    > 'Authenication' => 'Authenication',
    > 'PlainText' => 'PlainText',
    > 'loginRequest' => 'loginRequest',
    > 'loginResponse' => 'loginResponse',
    > 'logoutRequest' => 'logoutRequest',
    > 'logoutResponse' => 'logoutResponse',
    > 'UserInfo' => 'UserInfo',
    > );
    >
    > $gwservice = new GroupwiseService(
    > "./WSDL/groupwise.wsdl",
    > array(
    > "location" => "http://11.150.40.78:8756/soap",
    > *Your GroupWise server IP:
    > and PORT*
    > "classmap" => $classmap,
    > "trace" => true)
    > );
    >
    > // do login
    > $pt = new PlainText();
    > $pt‑>username = *"YOUR GROUPWISE USERNAME"*;
    > $pt‑>password = *"YOUR GROUPWISE PASSWORD"*;
    >
    > $lr = new loginRequest();
    > $lr‑>auth = $pt;
    > $lr‑>language = "en";
    > $lr‑>version = "1.2";
    > $lr‑>application = "phpClient";
    >
    > $lres = $gwservice‑>loginRequest($lr);
    > //print_r($lres);
    >
    >
    > I Hope this will help others.
    >
    > ‑‑
    > Signature:
    >
    > How old is the Orthodox Faith?
    > 'How old is the orthodox faith?'
    > (http://www.orthodoxphotos.com/history.shtml)

  • Help me!    How to use it as a web service from third party application?

    After using JDeveloper to develop BSSV object e.g. JP550010, how to use it as a web service from third party application?
    TKS！

    Obviously the OP is working on a project for the Bead Society of Southeastern Virginia http://www.bssv.org. Oh, wait, maybe he's researching the Blueberry Shoestring Plant Virus http://abbreviations.yourdictionary.com/bssv
    :D
    John

  • Oracle 10g Enterprise Manager web service unable to start

    I am unable to get Enterprise Manager web service for Oracle 10g to start in Windows. Anybody can tell me where to find out what is the problem and what are the possible problems and solutions? I do not wish to re-install or create a new database instance because there is existing data and will require extensive configurations to my web and app servers if I change the database instance. Thanks!

    Hi.
    What does the log say?
    From %ORACLE_HOME%\opmn\logs folder.
    rgds
    Kjell

Maybe you are looking for