How Calculate Produce Server hardware configuration?

Hi all
wo have a  NW 7.0 ehp1 SP7 .we use Portal and KM.
there is about 1000 User.
consider perfermance.  so  the produce server use how many cup ? Memory ? Hard disk capacity?
thanks .

Hi,
I suppose you mean to size the Production system server.
The sizing of the server hardware will depend of different things.
You can do the sizing with the help of the SAP Quick Sizer.
The SAP quick sizer is a tool which is available online to do the sizing of SAP systems.
The quick sizer can be found at service.sap.com/quicksizer
You can go through the documentation provided on the URL and create the sizing project online.
The results obtained from the quick size rproject will provide you the SAPS rating of the server required and the memory and hard disk requirements that suit your needs.
Regards,
Rohan.

Similar Messages

  • Need Server Hardware Configuration Advice

    Good morning!
    We are using Microsoft Visual SourceSafe for version control.
    Two years ago, when I requested that RoboHelp be connected to a
    database application for version control and multi-author support
    (I asked for RoboSource Control on a dedicated server), they gave
    us SourceSafe on a shared server. We now have 40 help systems and
    have suffered many losses (corrupt database = rebuild the project
    using the html files) as that shared server has gone down while
    RoboHelp was connected to it.
    I'm submitting a work request to our IT department today for:
    1) Upgrade from RoboHelp Office 5 to RoboHelp 6
    2) Purchase and installation of RoboHelp Server 6
    3) Purchase of a dedicated server
    I'm stuck on what to ask for with respect to the server
    hardware configuration - and afraid that if I don't provide them
    with detailed specifications that they'll provide us with another
    inadequate setup. We currently have a need for 13 simultaneous
    authors - some over VPN - to work under version control, and we're
    growing. Can anyone provide me with a recommendation for server
    hardware configuration?
    Adobe's web site only specifies the system requirements for
    the RoboHelp Server 6 software installation - and sales support
    told me that they are not able to recommend a server configuration.
    I don't like going into this at the mercy of anyone in our IT
    department! My husband, who is a database administrator, gave me
    the following advice and I'm wondering if that's all I need to tell
    IT or are there other potential issues I need to cover?
    quote:
    For the storage or “hard drive” you want a RAID
    controller with an array of hard drives for your data. You will
    have a C: drive for the OS but your data should be separated from
    the OS on a RAID controller with an array of hard drives.
    For RAM you want a few gigs.
    In addition to the application software
    requirement of 100 MB of hard drive space, we currently have 42GB
    (2.5 years) of help system data. We have 40 help systems spread
    between 10 databases (separated by lines of business) - we used
    this configuration because early in the game we thought our
    corruption issues were stemming from databases that were too large
    for SourceSafe to handle. I'm wondering, with RoboHelp Server 6
    will we need to use multiple databases or can it handle 40+ help
    systems in one database?
    I also have a need for a few help systems to be in their own
    databases because we are running them for other companies owned by
    the bank and that data can't be co-mingled - can RoboHelp Server 6
    handle multiple databases?
    Thanks in advance for any assistance you can provide.

    Hi THessler
    I've used Microsoft Visual Source Safe (VSS) quite
    successfully for many years with RoboHelp with no issues such as
    you are citing. You further state something I and probably many
    others here find very disturbing.
    You said:
    We now have 40 help systems and have suffered many losses
    (corrupt database = rebuild the project using the html files) as
    that shared server has gone down while RoboHelp was connected to
    it.
    This would seem to imply that you aren't using RoboHelp
    correctly with the source control system. And if this proves to be
    true, you will likely see the SAME behavior with RoboSource Control
    or any other source control system you decide to use.
    Please allow me to explain. RoboHelp does not like working in
    any form of a networked situation, period. If you use it this way,
    it will frequently crash and corrupt files and all sorts of ill
    mannered things. Bottom line is that RoboHelp absolutely needs to
    be working on files only when they are stored on your local PC.
    I know I know, how does one accomplish this with a Source
    Control system? After all, the fact the Source Control system has
    to sit on a server means working from a server, no?
    Here's the deal. With any Source Control system you use, you
    should find that you have the main Source Control database, which
    resides on a server.
    But (and here's the kicker) when you configure users that
    participate in Source Control, each user is configured with
    something called a
    Working folder. This is a special folder where the files
    from the database are copied to. RoboHelp should be working on
    files inside this folder. As they are updated, copies are placed on
    the server copy.
    Sooo, before abandoning VSS or before totally configuring the
    new source control system, I'd first ensure you are using it
    properly. You may just find that you don't need to spend the money
    for a new source control system after all.
    Cheers... Rick

  • The server hardware configuration of IndesignServer ?

    I'm going to use IndesignServer within the enterprise network to establish a platform for online editing, there are about 200 users, the server hardware configuration, please?

    There are a lot of questions here, but I'll throw in my 2 cents on a couple of them.
    How many databases are on your database machine? The correct answer here is "1".
    What is the current load on the system in terms of percent CPU / IO? If it's 99%, then sure, APEX apps will probably push it over the edge.
    APEX page view times are typically measured in tenths and hundredths of a second. From my experience, OLTP APEX page views are usually in the range of 0.2 to 0.4 seconds per page view as indicated by the performance reports or simply putting a page in debug mode. So, if your avg page view time were say, 0.5 seconds and you have 2 cores, you can handle about 4 page views per second (240 / minute, 14,400 /hour, 115,200 / day). With that said, you'll need to benchmark your own page view times on your own system. If you write slow SQL, say 2 seconds per page view, you're now down to 14,400 per day! So, it's up to you.
    Are you currently reviewing ADDM or StatsPack reports on a regular basis? I STRONGLY suggest you run a few ADDM reports for 15 minute intervals during busy times of the day BEFORE you put APEX in production. Then you can run the same reports AFTER APEX is in production and review the impact on your database.
    As far as hardware, you don't indicate the platform or OS. 2 cores and 4 GB of RAM seems pretty low for any database these days (my laptop has the same specs), but will probably do the trick.
    Tyler Muth
    http://tylermuth.wordpress.com

  • How to check server hardware and OS issue without offline DB server

    Hi Experts,
    For checking hardware issue, do we have any way to check server hardware and OS performance without offline server?
    any way we could rule out bad hardware causing the problem without offline server?
    Thanks
    Jim

    I think your answer depends on the nature of the hardware issue you think you may be having, whose hardware you have, and the OS your are running on that hardware. Such as on UNIX there are several error logs that record errors related to the system including detected hardware issues and you have numerous utilities like vmstat and iostat that can be used to measure performance. Some disk units linclude their own diagnostics modules you can run.
    If you really want help I think you have to be a lot more specific about the problem you are facing.
    HTH -- Mark D Powell --

  • BODS - database server hardware configurations

    Hi,
    Can some one let me know what is the minmum hardware requirement for database server for BODS

    There is no minimum requirement for "database server" for BODS.  Apart from repositories, which can easily be hosted on a local instance of MySQL or SQL Server Express (at least during dev), and apart from the need for a database for the BIP database in BODS ver. 4, BODS can run w/o "database server" if, say, all you wanted it for was to sling text files around.  There are minimum hardware requirements for BODS job servers and clients.  Please refer to the [SAP product availability matrix (PAM)|http://service.sap.com/PAM] for hardware requirements.

  • Need hardware configuration for server

    Hi All,
    Need server hardware configuration for deploying and maintaining SSAS cube. Consider OLTP size as 100 GB
    Thanks,
    ATRSAMS

    Hi Atrsams,
    According to your description, you need some hardware recommendations for deploying and maintaining a SQL Server Analysis Services cube, right?
    Though this isn't a sizing recommendation, I'd encourage you to buy as much memory as you can afford. This is generally the choke point I've seen on servers, especially when using SSAS. For the detail information about it, please refer to the links below.
    http://sqlblog.com/blogs/marco_russo/archive/2013/02/12/hardware-sizing-guide-for-ssas-tabular.aspx
    http://www.experts-exchange.com/Hardware/Microsoft_Hardware/Q_27781248.html
    Regards,
    Charlie Liao
    TechNet Community Support

  • Hardware configuration planning

    We are migrating from Stellent 7.5.1 to UCM 11g and doing h/w capacity planning for new version. Want to know what are the parameters to do the capacity planning.
    We are assuming:
    - 200 concurrent users in 1 min, with the capacity to upload 5-8 mb of file upload by every user.
    - The uploaded document gets converted in to PDF and webviewable format.
    - The repository size of 1.5 TB with growth rate of 100 gb per quarter.
    Is there a way/calculation mechanism/tool helps to analyse the capacity of production server hardware configuration with the above mentioned usage and scenarios.
    What is the Oracle's minimum and recommended h/w configuration for a UCM11g.
    Thanks

    user13435697 wrote:
    We are assuming:
    - 200 concurrent users in 1 min, with the capacity to upload 5-8 mb of file upload by every user.
    - The uploaded document gets converted in to PDF and webviewable format.
    - The repository size of 1.5 TB with growth rate of 100 gb per quarter.In order to calculate the sizing more precisely you need to estimate also
    a) how many pages an approximate user will see (e.g. per minute) - this estimates UI activity
    b) how many checkins will occur (e.g. per minute) - is the 5-8 mb one bigger file or several smaller files?
    As a rule of thumb (if you don't know anything better), you may calculate that one license CPU can serve approx. 500 users, if their requirements do not contain anything special.
    In your particular case, it will be desirable to separate conversions; that is, install IBR on separate servers. With 200 docs of size 5-8 MB per minute (I used the available benchmark 10MB), the calculation sheet gives me the estimate of 195(!) Conversion Servers (if I used the other closest available benchmark, it gives me 20 CSs, so expect to be somewhere in between).
    Anyway, one thing is obvious: your project will be about mastering conversions.

  • Fieldpoint - How to reconfigured Field point hardware configuration

    Respected Sir,
    We are using labview version 5.1, operating system windows 95, FiledPoint explorer 1.6,
    I would kindly request all to please help to solve how to reconfigured Field point hardware, I am new learner of labVIEW.
    When i run Fieldpoint explorer 1.6, in labview 5.1 operating WINDOWS 95 version, i received one command as
    A value return from the server is out of the expected range.
    The FieldPoint hardware ranges need to be re configured, so they match the ranges saved in the configuration file.
    Go to each device configuration dialog and select channel configuration to synchronize the saved configuration with the hardware configuration.
    Thanking You
    Yours faithfully
    M.Viajy

    That is correct. There is no way to simulate a FieldPoint device. The suggested workaround should work well for you, however. Create some simulated VIs that perform the same task as the FieldPoint writes and reads (at least in terms of what inputs they accept or outputs they have), and place them in the other case in a Case Structure as the FieldPoint VIs.
    LabVIEW 8 takes these possibilities one step further with Conditional Disable Structures and Diagram Disable Structures. The difference between these two structures and a Case Structure is that code in the disabled cases doesn't even compile. This means you could even have broken wires or broken subVIs inside the disabled case, and you'd still be able to run your program. In the case of this FieldPoint application, you could use a Conditional Disable Structure that automatically polls the target OS type (Windows, Linux, Pharlap ETS, etc) and selectively compiles one case based on the target OS. This would allow you to seamlessly run VIs on your computer and FieldPoint without modifying any code. The other advantage is that the simulated FieldPoint code wouldn't get compiled when you target your real FieldPoint device, so you wouldn't increase your code size or memory usage unnecessarily for the final product.
    Message Edited by Jarrod S. on 04-24-2006 03:51 PM
    Jarrod S.
    National Instruments

  • Installed sync on Firefox 3.6.8. I receive error message: Server Incorrectly Configured. How to fix it?

    I installed Sync on Windows XP Home Edition, Firefox 3.6.8, with Zone Alarm and AVG anti-virus. Sync is not updating, instead it produces error message: Server Incorrectly Configured and hangs up. How to fix it?

    You might want to also post on this Google Group dedicated to Sync (formerly known as Weave), since it's such a new add-on.
    http://groups.google.com/group/mozilla-labs-weave

  • How to include hardware configuration in the installer?

    I have a VI developed with LabVIEW 2009 V9.0f2 using a USB-6009 and two of its analog inputs.  The VI uses the DAQ Assistant to configure the USB-6009.  I include the DAQmx Core Runtime 9.0.2 with the LabVIEW Runtime Engine 2009 in the installer build.  I spent most of the past week trying to get the application to run after installation.
     If I leave out the Hardware Configuration from MAX (no configData.nce file) and run the installer on another machine the application produces an Error-200378 Custom Scale Specified Does Not Exist  when it runs (I searched the 200378 error code - no help).
    If I include the Hardware Configuration from MAX to produce a configData.nce file, and select Perform the Import Silently to Merge the Import Data when the installer is built, I get this message during the install to another computer:
    .\Distribution.cpp(1902): IInstallerError 11004Developer Error. Distribution contains invalid dependencies:1. Product NI Remote Provider for MAX 4.6.1 ({FBD23528-31AC-412A-9DEE-6CEA814A7430}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.2. Product NI LabVIEW Real-Time Error Dialog ({297FA251-FF30-4F16-978C-4A65EA804EFF}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.3. Product NI LVBrokerAux 8.2.1 ({0FB31DF8-38DF-4C9D-B313-AFAFC3FBA02B}) depends on product with upgrade code {B5171839-26E3-48D9-9FD6-AF7F39055146}, version [8.2.379.0,), language in {} which is not in the distibution.Correct the distribution and try again. I’m not really sure that the installer even uses the configData.nce file during the build.
    Another error I have seen (I have done several other builds using various installer settings)  is that the app appears to run fine except it is unable to find the USB-6009, even though the operating system picks it up and installs it in the device manager seemingly without error.
    I am a novice LabVIEW user.  Any help you could give would be greatly appreciated.
    Bill
    Solved!
    Go to Solution.

    Hi Willygene,
    Give the steps listed in KnowledgeBase 52GH9OW5: Why Do I Get Error 200378 When Running a Stand Alone Application? a shot, does this help with the 200378 error?
    Do you have DAQmx installed on the other machine? Are you unbundling it with your installer? If so, what Run-Time Level are you buiding into your installer? Can you post screenshots of the errors that you are getting?
    Joshua B.
    National Instruments
    NI Services
    NI Support Resources
    NI Training Resources

  • How I can install and configure dg4odbc to access SQL Server database

    I need to link Oracle database (installed in Solaris) to SQL Server database. How can I install and configure dg4odbc. Is there any step by step tutorial or guide available there.Thanks in advance.

    Hi,
      You can download the DG4ODBC software from either MOS or eDelivery depending which versios you want to install
    For 11.2.0.4 -
    Patch 13390677: 11.2.0.4.0 PATCH SET FOR ORACLE DATABASE SERVER
    - login to My Oracle Support
    - click on 'Patches and Updates'
    - search for patch number 13390677
    - you may need to press the '+' button to see the platform list
    - scroll down the list to and click on the 'Oracle Solaris on SPARC (64-bit)'  option.
    - on the next screen click on the 'Download' option
    - from the list of download files choose -
    p13390677_112040_platform_5of7.zip
    - this is the Gateway media pack and has everything needed for a standalone gateway install.
    - unzip the file and run the installer and choose the gateway you want.
    For 12.1 -
    https://edelivery.oracle.com
    Product Pack – Oracle Database
    Platform – Oracle Solaris on SPARC (64-bit)
    Oracle Database 12c Release 1 (12.1.0.1.0) Media Pack for Oracle Solaris on SPARC (64-bit)
    - then for the gateways download –
    Oracle Database Gateways 12c Release 1 (12.1.0.1.0) for Oracle Solaris on SPARC (64-bit)
    - unzip and run the installer
    Whichever version you decide I recommend you install into a completely separtae ORACLE_HOME from any existing installs as this makes maintenacne easier.
    For the configuration have a look at this note if you have access to My oracle Support -
    How to Configure DG4ODBC on 64bit Unix OS (Linux, Solaris, AIX, HP-UX Itanium) to Connect to Non-Oracle Databases Post Install (Doc ID 561033.1)
    If not, then refer to the documentation available from -
    Oracle Database Help Center
    - choose either 12.1 or 11.2 then the 'Information Integration' option.
    You can also install the DG4ODBC on the Windows machine (or any other machine if preferred) and access it from the RDBMS on Solaris.
    Regards,
    Mike

  • How do I remove previous configuration of Essbase Server from Shared Services?

    Hi All,
    I'm trying to reinstall Essbase Server (on a new server; we've upgraded the Essbase Server hardware) and reload data but the current install believes I've already configured it despite removing EssbaseCluster-1 from Shared Services Application Groups.  Is there something else I have to do to get the new install of Essbase Server configured as a new Essbase instance?
    Thanks,
    Ryan

    I did the install as PTH0RC and my inventory.xml is configured correctly, but I get the following message trying to run a simple view
    C:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0\resources\instance>epmsys_registry view
    com.hyperion.hit.registry.exceptions.RegistryException: reg.properties not configured.
            at com.hyperion.hit.registry.Registry.getInstance(Registry.java:338)
            at com.hyperion.hit.registry.regedit.RegEditUtility.main(RegEditUtility.java:101)
    An error occured during the operation. Detailed Message is - reg.properties notconfigured.

  • How has access.log file configured in WebLogic server 10.0?

    1.) I am using BEA Weblogic 10.0 and my access.log is not getting updated.
    2.) I also need any information as to how this Webblogic server forms chunks (ex....access00011.log,access00012.log) because i have a software called AWStats which merges all these chunks into 1 single access.log file under its subdirectory.
    3.) I also need information as to how and where the user can specify/ form his own fields which gets displayed in the access.log
    FYI i have 2 servers and i checked under Logging->HTTP->advanced, in both the servers options and configurations are same but in 1 it works fine and access.log is updating but not in the other one.
    Kindly let me know i you have any leads into this issue!
    Thanks,
    Varun

    Hi Ravish,
    Firstly thanks for the reply.
    1.) -----
    What you can do is to set the buffer-size-kb parameter value to "0" in config.xml so that it can start logging once the server starts coming up rather then waiting for the default size which is 8kb to pass.
    Something like below:
    <web-server-log>
    <buffer-size-kb>0</buffer-size-kb>
    <web-server-log>
    For more details check the below link:
    Search for: CR302493
    http://download.oracle.com/docs/cd/E11035_01/wls100/issues/known_resolved.html
    --- for this issue i had browsed throught the forum before posting but in my conf file i have something like this instead of <buffer-size-kb>0</buffer-size-kb>
    <web-server>
    <web-server-log>
    <number-of-files-limited>false</number-of-files-limited>
    <log-file-format>extended</log-file-format>
    </web-server-log>
    </web-server>
    So how do i go about the path of debugging now??
    2.) -------
    If you do not want rotation of access.log then you can just disable it from the below console path just by putting Rotation type as None
    Server -> <YOUR_SERVER_NAME> -> Logging (tab) -> HTTP (sub-tab) -> Rotation type: None
    ---- for this in both my servers i have the settings like this,
    Rotation type--> By Size
    Rotation File size 5000
    Begin rotation time 00:00
    rotation interval 24
    files to retain 7
    and Log file rotation directory is left blank (to get created in same directory)
    and also Rotate log file on startup is unchecked.
    so??? what do you suggest!?
    3.) ------
    I also need information as to how and where the user can specify/ form his own fields which gets displayed in the access.log
    ---- regarding this, in my main server the access.log is getting updated and after 4.8Mb its creating 5Mb chunks. So, for example if the entire log is of 15 Mb then access.log stops updating at 4.98Mb and accesslog.out0001 and accesslog.out0002 is created with 5Mb each but the latest entry will be stored in accesslog.out0002 file. I hope i didn't complicate this :)
    Regards,
    Varun

  • Please tell me how you got the computer to reboot again once it was on the black screen saying "setup is inspecting your hardware configuration?"

    Please tell me how you got the computer to reboot again once it was on the black screen saying "setup is inspecting your hardware configuration?"

    Hi,
    use the power-switch on the left backside of your iMac to turn your Mac off.
    Use it again to restart your Mac and hold down the Alt/Option-button to get to the Boot Selection screen.
    Choose OSX.
    Once in OSX go to System Preferences - Startup Volume and reset it to use OSX as the default.
    Am I right assuming that you try to install Windows XP on a new (2011) iMac ?
    If so, XP is no longer supported by Apple for use/install With BootCamp.
    But there are some success stories when using a XP with SP3.
    Regards
    Stefan

  • How to clone Microsoft Exchange Server 2013 configurations from one server to another server?

    Hi! I need help of cloning Microsoft Exchange Server 2013 configurations from my first Server to the second Server. By doing this, the second Server will replace and run as per normal as the first Server is. How can this be done?
    Thanks!

    Cloning an Exchange Server is a very bad idea.  Exchange is very heavily intergrated into Active Directory and this can (and honestly not to sound scary probably will) cause major issues in your environment.  
    Also, since you cannot have 2 servers with the same name in the same domain/network running at the same time you'll need to change the name of one of the servers.   That is a huge no-no with Exchange and requires a complete uninstall/reinstall of the
    product.
    Now requirements differ between environments, but if you are in a scenario where you want to move from 1 Exchange 2013 (or 2010 for that matter) Server to another machine running the same version of Exchange AND (this is a big requirement for the failover
    cluster piece) the Operating Systems of the machines are the same (i.e going 2012r1 to 2012r1 or 2012r2 to 2012r2 and not 2012r1 to 2012r2) you can do what Brenle suggested with the DAG and DB copies. If the Operating System of the new machine is different
    (2012r1 to 2012r2) then you will will not be able to use a DAG, and will need to perform mailbox moves to move between servers.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Maybe you are looking for