How can I accelecate the load of the public homepage?

Hi all,
we have implemented several portal projects. But all the time we
not able to solve one problem. How can I speed up the initial
load of the public homepage.
We have implemented distributed environment (e.g. app server and
database on different machines). We have applied all the
patches. We are working with mutiple cpus and a huge amount of
main memory. We have read the manuals about apache tuning.
But we have still a performance problem with the public homepage
of a portal installation. A workaround is a static html page at
first. But we don't like it.
Any ideas are very appreciated.
Thanks,
Ingo

Hi all,
we have implemented several portal projects. But all the time we
not able to solve one problem. How can I speed up the initial
load of the public homepage.
We have implemented distributed environment (e.g. app server and
database on different machines). We have applied all the
patches. We are working with mutiple cpus and a huge amount of
main memory. We have read the manuals about apache tuning.
But we have still a performance problem with the public homepage
of a portal installation. A workaround is a static html page at
first. But we don't like it.
Any ideas are very appreciated.
Thanks,
Ingo

Similar Messages

  • How can I hold the public IP on a specific profile on the asa 5510

    Hi Guys
    How can I hold the public IP on my cisco client VPN NAT session so nobody else can use it? I have a cisco asas 5510
    inside is 172.10.20.86
    public 166.245.192.90
    Did I need to call my ISP?
    thanks

    sorry
    I willl like to lock or reserve the public IP  address from a NAT session on the ASA vpn.
    that way a sepcific profile and public IP can be use all the time. I know how on the inside IP but not on the public IP.
    it make sense

  • I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the firefox homepage to come up. How can I get the Yahoo homepage off and get the firefox homepage on?

    I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the Firefox homepage to come up. I have tried to reinstall Firefox, but the Yahoo homepage still comes up. How can I get the yahoo page off and get the Firefox page back on?

    Here are instructions to [[How to set the home page#w_restore-the-default-home-page|restore the default home page]].

  • How can I change the sites homepage 365 and then make the changes public?

    Hi is there any way I can change the look of the sites homepage and make it public so anyone who logs in see's the additoinal webparts etc.
    it seems I can only create a personal view of the sites page which is slightly annoying as I would like to add a few announcements for users on the Intranet who go to the sites page.

    I created a link to the sites page as shown in the image above.
    but I noticed the link goes like this:
    https://mydomain.my.sharepoint.com/personal/ausername/Social/Sites.aspx
    how can I link to the sites page without having to link to a particular user? what would be the link for that so when it goes to the sites page it goes to the sites page for that particular person?
    thanks

  • How can I hardcode the public key into my coding?

    Hi! I need to hardcode the public key into my program so can someone tell me how can i do it.
    Purpose:-
    I am trying to create a license file( signature file) and the public key in my product.

    Hi! Thank for your reply.
    I dont understand, but anywhere i get the solution already.
    Thanks.
    byte[] pubKey = pub.getEncoded();
                    String hexPubKey = toHexString(pubKey);
                    FileOutputStream pubKeyfos = new FileOutputStream("suepubk");
                    PrintWriter pwPubKey = new PrintWriter(pubKeyfos);
                    pwPubKey.write("PublicKey="+hexPubKey);
                    pwPubKey.close();the following method i got it from internet. I forget the link.
    private static String toHexString(byte[] block) {
            StringBuffer buf = new StringBuffer();
            int len = block.length;
            for (int i = 0; i < len; i++) {
                 byte2hex(block, buf);
    //if (i < len-1) {
    // buf.append(":");
    return buf.toString();

  • I did manual creation of DB. How can I start the DB Homepage.

    Hi all,
    I installed XE on Fedora core 4. DB can not be created (dont know why). So, I decided to create DB manually.
    The content of listener.ora:
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (DESCRIPTION =
    (ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    DEFAULT_SERVICE_LISTENER = (XE)
    The listener is also runing, listening on port 8080. But I cannot access DBhomepage http://127.0.0.1:8080/apex. The message displayed is
    ""The connection was reset
    The connection to the server was reset while the page was loading.
    * The site could be temporarily unavailable or too busy. Try again in a few
    moments.
    * If you are unable to load any pages, check your computer's network
    connection.
    * If your computer or network is protected by a firewall or proxy, make sure
    that Firefox is permitted to access the Web.
    The browser is firefox, use "direct connection" option in "Connection Setting". (this obeys installation guide by Oracle)
    I think that I should do some more configuration.
    Could anyone have suggestion?
    Thanks.

    If you create the database manually, you're missing the integrated apex part. There's no documentation on how to do this manually either. Unless you can live without apex, you'll have to do a reinstall (or find a way to restore the original database supplied with the installation).
    C.

  • How can i call the public void paint(Graphics g) method on click of button?

    Hello,
    I have done this before i know its got to do something with the repaint() method but can someone show me with and example and call the paint method using AWT in a frame not in an applet....
    Thank you very much.

    Thank You very Much.... You have cleared all my doubts.
    But my main objective is to display an image in an AWT Frame !!
    here is the code that i have been trying..
    import java.awt.*;
    import java.awt.event.*;
    public class check6 extends Panel
         Frame f;
         Image i;
         public check6()
              f = new Frame("Heading");
              f.addWindowListener(new WindowAdapter(){
                   public void windowClosing(WindowEvent e){
                        System.exit(0);
              final Button b1 = new Button("Submit");
              b1.addActionListener(new ActionListener() {
                   public void actionPerformed(ActionEvent e){
                        repaint();
              i = getImage(getCodeBase(), "titanic.jpg");
              add(b1);
              setLayout(new FlowLayout(FlowLayout.LEFT));
              f.add(this);
              f.setSize(500,500);
              f.setVisible(true);
         public void paint(Graphics g)
              g.drawImage(i,10,10,this);
         public static void main(String args[])
              new check6();
    }

  • How can you get  the public variables from object that extends JLabel?

    I'm using the mouseClickedListener method e.getComponent(); to get the component that is clicked on the sceen. The component i clicked is type "object" and extends a jlabel, and i really need to acces a variable from it. Heres the code i'm using-
    MouseListener listenerDown=new java.awt.event.MouseListener() {
            public void mousePressed(MouseEvent e){
                paintAll();
                mX=e.getX();
                mY=e.getY();
            public void mouseClicked(MouseEvent e) {
                Component c = e.getComponent();
                drawResizeBox(c);
                selected=c;
            public void mouseReleased(MouseEvent e) {
            public void mouseEntered(MouseEvent e) {
            public void mouseExited(MouseEvent e) {
    package javapoint;
    import java.awt.Color;
    import java.awt.Graphics2D;
    import java.awt.Image;
    import java.awt.Rectangle;
    import java.awt.RenderingHints;
    import java.awt.geom.Line2D;
    import java.awt.image.BufferedImage;
    import javax.swing.Icon;
    import javax.swing.ImageIcon;
    import javax.swing.JLabel;
    public class object extends JLabel{
        public object(Rectangle rect,int id){
            idNum=id;
            Rect=rect;
            BufferedImage image = new BufferedImage((int)rect.getWidth()+1, (int)rect.getHeight()+1, BufferedImage.TYPE_INT_ARGB);
            Graphics2D g = (Graphics2D) image.getGraphics();       
            g.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
            g.drawRect((int)rect.getX(), (int)rect.getY(), (int)rect.getWidth(), (int)rect.getHeight());
            Icon icon = new ImageIcon((Image)image);
            setIcon(icon);
            setBounds((int)rect.getX()-1, (int)rect.getY()-1, (int)rect.getWidth()+1, (int)rect.getHeight()+1);
            mainFrame.slideArr[mainFrame.sIndx].add(this);
            setVisible(true);
            r=true;       
        object(Oval oval,int id){
            idNum=id;       
            setBounds(oval.getX(), oval.getY(), oval.getWidth(), oval.getHeight());
            getGraphics().drawOval(oval.getX(), oval.getY(), oval.getWidth(), oval.getHeight());
            o=true;
            setVisible(true);
        object(Line2D line,int id){
            idNum=id;       
            setBounds((int)line.getX1(), (int)line.getY1(), (int)line.getX2(), (int)line.getY2()); //Not gunna work
            getGraphics().drawLine((int)line.getX1(), (int)line.getY1(), (int)line.getX2(), (int)line.getY2());
            l=true;
            setVisible(true);
        object(Icon icon,int id){
            idNum=id;
            setIcon(icon);
            setBounds(50,50,icon.getIconWidth(),icon.getIconHeight());
            i=true;
            setVisible(true);
        void drawObject(object obj){
            if(r){
                Rectangle rect=obj.Rect;
                setBounds((int)rect.getX()-1, (int)rect.getY()-1, (int)rect.getWidth()+1, (int)rect.getHeight()+1);          
                Rect=rect;
                BufferedImage image = new BufferedImage((int)rect.getWidth()+1, (int)rect.getHeight()+1, BufferedImage.TYPE_INT_ARGB);
                Graphics2D g = (Graphics2D) image.getGraphics();           
                g.setColor(Color.red);
                g.drawRect(0, 0, (int)rect.getWidth(), (int)rect.getHeight());           
                Icon icon = new ImageIcon((Image)image);
                setIcon(icon);
            }else if(l){
            }else if(o){
            }else if(i){
        public boolean r=false;
        public Rectangle Rect;
        public boolean o=false;
        public Oval Oval;
        public boolean l=false;
        public Line2D Line;
        public boolean i=false;
        public Icon Icon;
        public JLabel label;
        public int idNum;
    }Edited by: ghostbust555 on Feb 12, 2010 2:14 PM

    ghostbust555 wrote:
    Well see the problem is i have an array of 200 objects.What does that have to do with anything? And if it does, why isn't it in the code you posted?
    I dont understand what you mean in your "Edit..." part. could you show some code/ explain farther? sorry if its a dumb question I'm still a bit of a novice at java.Yeah.
    object yuck = (object) e.getComponent(); // That's a cast.
    boolean yucksR = yuck.r; // Get the "r" variable from the object.

  • I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

    I down loaded sygic on my iPhone 3s but the icon is missing even in the search but when I want to download it again ,it say this application is present, how can I make the icon to show up

    - Have you tried a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Try syncing  the iPod to your computer. Then delete from iTunes and sync. that should delete it from the iPod. Then redownload it.

  • How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

    How can I get the 23 July update to load onto my iPad. I haven't been able to access my documents or work for weeks and need to use it. Has anyone else had similar problems?

    Hello Arthur,
    Thank you for the reply.
    You were correct that deleting the app and reinstalling it was the only thing to make it work but unfortunately I lost all the documents I made, even though they were backed up to iCloud before i deleted the app. At the same time as deleting pages I had to delete keynote and numbers too, so I've lost all the documents in them too.
    The mb of data which was assigned to each programme in iCloud has reduced, so. I guess they are gone for good. Is there any other way to reaccess them?
    Not your fault but I am a bit fed up the the iPad. I have lost work that I've done and have no other copy apart from what was in iCloud, as I don't have a printer and couldn't email them too myself as I couldn't get into the programme and  i've also got episodes of tv series I purchased that I can't download and albums that are half downloaded with songs missing, so I feel a bit swindled out of time and money and am going back to DVD ,  pen and paper and CDs .
    Instead of using iCloud I guess the only way to make sure I don't loose any more documents it to email them to myself each time I save them on the iPad. Is there anything else you could suggest please?
    I don't have any other apple products apart from iPods, so I can't access the iCloud on anything else can I?
    Thanks
    Amanda

  • How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

    I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
    Attachments:
    micliente.llb ‏183 KB
    miservidor.llb ‏186 KB
    rdsubvis.llb ‏214 KB

    I down loaded your files but could use some instructions on what needs run.
    It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
    Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
    hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

    How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

    Hey Debbiered1,
    Follow the steps in this link to resolve the issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    When you uninstall, the items you uninstall and the order in which you do so are particularly important:
    Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    Let us know if following that article and uninstalling those components in that order helped the situation.
    Welcome to Apple Support Communities!
    Take care,
    Delgadoh

  • Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

    Our Band purchased Logic Pro and it was loaded to one member's Macbook Pro. Unfortunately, he passed away with cancer in May. How can we transfer the ownership and the software (it was downloaded) to a new user's Macbook?

    Hi Kurt,
    The Mac IIci is not even powering on at all. Tried again with wih a tested power cable and no luck. 
    I think it's best that take  this issue to the Older Hardware Community. Not only did I see a fair number of replacement parts for the IIci avaiable online, but there also vintage external floppy drives as well. I'm not giving up.
    Thank you for your time and interest in helping.

  • My video was recorded on my I phone 4, the camera was held sideways for a horizontal view, but loads in I movie vertically.  How can I rotate the image so it is horizontal?

    My video was recorded on my I phone 4, the camera was held sideways for a horizontal view, but loads in I movie vertically.  How can I rotate the image so it is horizontal?

    Drag the clip from your Event to your Project. Then use the Rotate, Crop, Ken Burns Tool on the Middle Toolbar to rotate it

  • PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

    PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

    adobeamatuer
    Thanks for the reply.
    Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
    I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
    Please update us on your progress when you get a chance.
    Best wishes
    Thanks.
    ATR
    Add On...spelling correct 12 03 2014.

Maybe you are looking for