How can i add two table data into third internal table see below

hi i insert diffferent table data into different internal table i did try to insert two different internal table data into third internal table by using move
but only single data is coming please help me
i want this two internal table data inot third internal table.
sELECT  * FROM J_1IEXCHDR INTO CORRESPONDING FIELDS OF ITAB1 WHERE STATUS = 'P'.
SELECT * FROM J_1IEXCDTL INTO CORRESPONDING FIELDS OF ITAB2  WHERE LIFNR = J_1IEXCHDR-LIFNR.
                         AND DOCYR  = J_1IEXCHDR-DOCYR,
                         AND DOCNO  = J_1IEXCHDR-DOCNO.
WRITE: /  ITAB1-LIFNR,
          ITAB1-DOCNO,
          ITAB1-EXYEAR,
          ITAB1-BUDAT,
          ITAB2-EXBED,
          ITAB2-RDOC,
          ITAB2-ECS.
ENDSELECT.
ENDSELECT.
thank you .

hi
  Two add two internal tables data.  first we need to create third internal table with all the fields of first two internal tables.
later u move the two internal tables data to third internal table
by looping the internal table which have more records or depending on the requirement and move the corresponding fields of first internal table to the third internal table and use the read statement with condition based on primary key of first itab and get the corresponding data of 2table into 3table.
i am sending the sample code to u.
check it out. i think u will understand how to move.
select vbeln waerk netwr erdat audat kunnr
   into table it_vbeln
   from vbak
   where vbeln in s_vbeln
     and erdat in s_erdat.
  if not it_vbeln[] is initial.
  select kunnr name1
   into table it_kunnr
   from  kna1
   for all entries in it_vbeln
     where kunnr = it_vbeln-kunnr.
  endif.
  loop at it_vbeln.
  clear it_final.
   it_final-vbeln = it_vbeln-vbeln.
   it_final-waerk = it_vbeln-waerk.
   it_final-netwr = it_vbeln-netwr.
   it_final-erdat = it_vbeln-erdat.
   it_final-audat = it_vbeln-audat.
  read table it_kunnr with key kunnr = it_vbeln-kunnr.
   it_final-name1 = it_kunnr-name1.
  append it_final.
  endloop.

Similar Messages

  • To add the multiline data into an internal table from TextEdit

    Hello Experts,
    I have one requirement that I have to use the TextEdit field. and put the values into an internal table.
    can you help me. with some sample code.
    Thanks in Advance
    Kuldeep

    The problem is solved by using the following code
    DATA: data TYPE REF TO CL_HTMLB_TEXTEDIT.
    Data itab1 type itab.
    data ?= CL_HTMLB_MANAGER=>GET_DATA(
                                    request = runtime->server->request
                                     name    = 'textEdit'
                                     id      = 'txt1'
    data text type string.
    IF data IS NOT INITIAL.
      text = data->text.
    ENDIF.
    SPLIT text AT CL_ABAP_CHAR_UTILITIES=>CR_LF INTO
          TABLE itab1.
    Kuldeep

  • Download the KTOPL  field data and GLT0 table data into one Internal table

    Hi,
    I have downloaded GLT0 table fields  data to PC file . But i need to download KTOPL(Chart Of Accounts) data also. in GLT0 table there is no KTOPL field.
    But in SKA1 table have KTOPL field. Then what is the issue is GLT0 data & KTOPL field data needs to download into one Internal Table.
    anybody could you please solve this problem. immediately need to solve this.
    Below is the code.
    REPORT ZFXXEABL_1 NO STANDARD PAGE HEADING
                    LINE-SIZE 200.
    Tables Declaration
    TABLES : GLT0.
    Data Declaration
    DATA :   FP(8)           TYPE C,
             YEAR           LIKE GLT0-RYEAR,
             PERIOD(3)       TYPE C,
             DBALANCE         LIKE VBAP-NETWR VALUE 0 ,
             CBALANCE         LIKE VBAP-NETWR VALUE 0.
    *Internal table for for final data..
    DATA : BEGIN OF REC1 OCCURS 0,
           BAL             LIKE GLT0-TSLVT value 0,
           COAREA          LIKE GLT0-RBUSA,
          CA(4)           TYPE C,
           KTOPL           LIKE ska1-ktopl, 
           CCODE           LIKE GLT0-BUKRS,
           CREDIT          LIKE  VBAP-NETWR,
           CURRENCY        LIKE GLT0-RTCUR,
           CURTYPE(2)      TYPE N,
           DEBIT           LIKE VBAP-NETWR,
           YEAR(8)         TYPE C,
           FY(2)           TYPE C,
           ACCOUNT         LIKE GLT0-RACCT,
           VER             LIKE GLT0-RVERS,
           VTYPE(2)        TYPE N,
           CLNT            LIKE SY-MANDT,
           S_SYS(3)        TYPE C,
           INDICATOR      LIKE GLT0-DRCRK,
           END OF REC1.
    DATA : C(2) TYPE N,
           D(2) TYPE N.
    DATA REC1_H LIKE REC1.
    Variable declarations
    DATA :
           W_FILES(4) TYPE N,
           W_DEBIT LIKE GLT0-TSLVT,
           W_CREDIT LIKE GLT0-TSLVT,
           W_PCFILE LIKE RLGRAP-FILENAME ,
           W_UNIXFILE LIKE RLGRAP-FILENAME,
           W_PCFILE1 LIKE RLGRAP-FILENAME,
           W_UNIXFIL1 LIKE RLGRAP-FILENAME,
           W_EXT(3) TYPE C,
           W_UEXT(3) TYPE C,
           W_PATH LIKE RLGRAP-FILENAME,
           W_UPATH LIKE RLGRAP-FILENAME,
           W_FIRST(1) TYPE C VALUE 'Y',
           W_CFIRST(1) TYPE C VALUE 'Y',
           W_PCFIL LIKE RLGRAP-FILENAME.
    DATA: "REC LIKE GLT0 OCCURS 0 WITH HEADER LINE,
          T_TEMP LIKE GLT0 OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF REC3 OCCURS 0.
          INCLUDE STRUCTURE GLT0.
    DATA: KTOPL LIKE SKA1-KTOPL,
          END OF REC3.
    DATA: BEGIN OF T_KTOPL OCCURS 0,
          KTOPL LIKE SKA1-KTOPL,
          SAKNR LIKE SKA1-SAKNR,
          END OF T_KTOPL.
    Download data.
    DATA: BEGIN OF I_REC2 OCCURS 0,
           BAL(17),        "             like GLT0-TSLVT value 0,
           COAREA(4),      "          like glt0-rbusa,
           CA(4),          "  chart of accounts
           CCODE(4),       "           like glt0-bukrs,
           CREDIT(17),     "          like  vbap-netwr,
           CURRENCY(5),    "       like glt0-rtcur,
           CURTYPE(2),     "      type n,
           DEBIT(17),      "           like vbap-netwr,
           YEAR(8),        "  type c,
           FY(2),          " type c, fiscal yr variant
           ACCOUNT(10),    " like glt0-racct,
           VER(3),         "    like glt0-rvers,
           VTYPE(3),       " type n,
           CLNT(3),        "like sy-mandt,
           S_SYS(3),       "like sy-sysid,
           INDICATOR(1),   "   like glt0-drcrk,
          END OF I_REC2.
    Selection screen.                                                    *
    SELECTION-SCREEN BEGIN OF BLOCK BL1  WITH FRAME TITLE TEXT-BL1.
    SELECT-OPTIONS : COMPCODE FOR GLT0-BUKRS,
                      GLACC FOR GLT0-RACCT,
                      FISYEAR   FOR GLT0-RYEAR,
                    no intervals no-extension,      "- BG6661-070212
                       FISCPER FOR GLT0-RPMAX,
                     busarea   for glt0-rbusa,
                      CURRENCY  FOR GLT0-RTCUR.
    SELECTION-SCREEN END   OF BLOCK BL1.
    SELECTION-SCREEN BEGIN OF BLOCK BL2  WITH FRAME TITLE TEXT-BL2.
    PARAMETERS:
      P_UNIX AS CHECKBOX,                  "Check box for Unix Option
      P_UNFIL LIKE RLGRAP-FILENAME,        " Unix file Dnload file name
       default '/var/opt/arch/extract/GLT0.ASC',  "- BG6661-070212
      P_PCFILE AS CHECKBOX,                "Check box for Local PC download.
      P_PCFIL LIKE RLGRAP-FILENAME         " PC file Dnload file name
                 default 'C:\GLT0.ASC'.           "- BG6661-070212
          DEFAULT 'C:\glt0_gl_balance_all.asc'.     "+ BG6661-070212
    SELECTION-SCREEN END   OF BLOCK BL2.
    *eject
    Initialization.                                                     *
    INITIALIZATION.
    Try to default download filename
    p_pcfil = c_pcfile.
    p_unfil = c_unixfile.
    if sy-sysid eq c_n01.
       p_unfil =   c_unixfile.
    endif.
    if sy-sysid eq c_g21.
       p_unfil =   c_g21_unixfile.
    endif.
    if sy-sysid eq c_g9d.
       p_unfil =   c_g9d_unixfile.
    endif.
    Default for download filename
    *{ Begin of BG6661-070212
      CONCATENATE C_UNIXFILE
                  SY-SYSID C_FSLASH C_CHRON C_FILENAME INTO P_UNFIL.
    *} End of BG6661-070212
    AT SELECTION-SCREEN OUTPUT.
    loop at screen.
       if screen-name = 'P_PCFIL'.        "PC FILE
         screen-input = '0'.
         modify screen.
       endif.
       if screen-name = 'P_UNFIL'.        "UN FILE
         screen-input = '0'.
         modify screen.
       endif.
    endloop.
      if w_first = 'Y'.
        perform path_file.
        w_first = 'N'.
      endif.
    if w_cfirst = 'Y'.
       perform cpath_file.
       w_cfirst = 'N'.
    endif.
    Start-of-Selection.                                                 *
    START-OF-SELECTION.
    *COLLECT DATA
      PERFORM COLLECT_DATA.
    *BUILD FILENAMES
      PERFORM BUILD_FILES.
    *LOCAL
      IF P_PCFILE = C_YES.
       PERFORM LOCAL_DOWNLOAD.
      ENDIF.
    *UNIX
      IF P_UNIX = C_YES.
        PERFORM UNIX_DOWNLOAD.
      ENDIF.
      IF P_PCFILE IS INITIAL AND P_UNIX IS INITIAL.
        MESSAGE I000(ZL) WITH 'Down load flags both are unchecked'.
      ENDIF.
    END-OF-SELECTION.
    IF P_PCFILE = C_YES.
    WRITE :/ 'PC File'  , C_UNDER, P_PCFIL.
    ENDIF.
    *&      Form  DOWNLOAD
          Download                                                       *
    FORM DOWNLOAD.
      P_PCFIL =  W_PATH.
      DATA LIN TYPE I.
      DESCRIBE TABLE I_REC2 LINES LIN.
      WRITE:/ 'No of Records downloaded = ',LIN.
      CALL FUNCTION 'WS_DOWNLOAD'
           EXPORTING
               FILENAME            =  P_PCFIL
               FILETYPE            =  C_ASC   "c_dat   "dat
           TABLES
                DATA_TAB            = I_REC2  " t_str
               fieldnames          = t_strhd
           EXCEPTIONS
                FILE_OPEN_ERROR     = 1
                FILE_WRITE_ERROR    = 2
                INVALID_FILESIZE    = 3
                INVALID_TABLE_WIDTH = 4
                INVALID_TYPE        = 5
                NO_BATCH            = 6
                UNKNOWN_ERROR       = 7
                OTHERS              = 8.
      IF SY-SUBRC EQ 0.
      ENDIF.
    ENDFORM.
    *&      Form  WRITE_TO_SERVER
          text                                                           *
    -->  p1        text
    <--  p2        text
    FORM WRITE_TO_SERVER.
      DATA : L_MSG(100) TYPE C,
             L_LINE(5000) TYPE C.
      P_UNFIL =  W_UPATH.
      DATA LIN TYPE I.                           
      DESCRIBE TABLE I_REC2 LINES LIN.           
      WRITE:/ 'No of Records downloaded = ',LIN. 
      OPEN DATASET P_UNFIL FOR OUTPUT IN TEXT MODE.        " message l_msg.
      IF SY-SUBRC <> 0.
        WRITE: / L_MSG.
      ENDIF.
    perform header_text1.
      LOOP AT I_REC2.
        TRANSFER I_REC2 TO P_UNFIL.
      ENDLOOP.
      CLOSE DATASET P_UNFIL.
      WRITE : / C_TEXT , W_UPATH.
      SPLIT W_UNIXFILE AT C_DOT INTO W_UNIXFIL1 W_UEXT.
      CLEAR W_UPATH.
      IF NOT W_UEXT IS INITIAL.
        CONCATENATE W_UNIXFIL1  C_DOT W_UEXT INTO W_UPATH.
      ELSE.
        W_UEXT = C_ASC. " c_csv.
        CONCATENATE W_UNIXFIL1 C_DOT W_UEXT INTO W_UPATH.
      ENDIF.
    ENDFORM.                               " WRITE_TO_SERVER
    *&      Form  BUILD_FILES
    FORM BUILD_FILES.
      IF P_PCFILE = C_YES.
        W_PCFILE = P_PCFIL.
    ***Split path at dot**
        SPLIT W_PCFILE AT C_DOT INTO W_PCFILE1 W_EXT.
        IF NOT W_EXT IS INITIAL.
          CONCATENATE W_PCFILE1 C_DOT W_EXT INTO W_PATH.
        ELSE.
          W_PATH = W_PCFILE1.
        ENDIF.
      ENDIF.
      IF P_UNIX = C_YES.
        W_UNIXFILE = P_UNFIL.
        SPLIT W_UNIXFILE AT C_DOT INTO W_UNIXFIL1 W_UEXT.
        IF NOT W_UEXT IS INITIAL.
          CONCATENATE W_UNIXFIL1  C_DOT W_UEXT INTO W_UPATH.
        ELSE.
          W_UPATH = W_UNIXFIL1.
        ENDIF.
      ENDIF.
    ENDFORM.
    FORM CPATH_FILE.
    CLEAR P_PCFIL.
       CONCATENATE C_PCFILE
                   C_COMFILE SY-SYSID C_UNDER SY-DATUM SY-UZEIT
                   C_DOT C_ASC INTO  P_PCFIL.
    ENDFORM.                    " CPATH_FILE
    FORM PATH_FILE.
    CLEAR P_UNFIL.
      if sy-sysid eq c_n01.
       CONCATENATE C_UNIXFILE
                   C_COMFILE SY-SYSID C_UNDER SY-DATUM SY-UZEIT
                    C_DOT C_ASC INTO  P_UNFIL.
      endif.
      if sy-sysid eq c_g21.
      concatenate c_g21_unixfile
                  c_comfile sy-sysid c_under sy-datum sy-uzeit
                   c_dot c_asc into  p_unfil.
      endif.
      if sy-sysid eq c_g9d.
      concatenate c_g9d_unixfile
                  c_comfile sy-sysid c_under sy-datum sy-uzeit
                   c_dot c_asc into  p_unfil.
      endif.
    ENDFORM.                    " PATH_FILE
    Local_Download                                                       *
          Local                                                          *
    FORM LOCAL_DOWNLOAD.
    perform header_text.
    LOOP AT REC1.
    REC1-CLNT = SY-MANDT.
    REC1-S_SYS = SY-SYSID.
    MOVE:  REC1-BAL TO I_REC2-BAL,
            REC1-COAREA TO I_REC2-COAREA,
           REC1-CA TO I_REC2-CA,         
            REC1-KTOPL TO I_REC2-CA,       
            REC1-CCODE TO I_REC2-CCODE,
            REC1-CREDIT TO I_REC2-CREDIT,
            REC1-CURRENCY TO I_REC2-CURRENCY,
            REC1-CURTYPE TO I_REC2-CURTYPE,
            REC1-DEBIT TO I_REC2-DEBIT,
            REC1-YEAR TO I_REC2-YEAR,
            REC1-FY TO I_REC2-FY,
            REC1-ACCOUNT TO I_REC2-ACCOUNT,
            REC1-VER TO I_REC2-VER,
            REC1-VTYPE TO I_REC2-VTYPE,
            REC1-CLNT TO I_REC2-CLNT,
            REC1-S_SYS TO I_REC2-S_SYS,
            REC1-INDICATOR TO I_REC2-INDICATOR.
    APPEND I_REC2.
    CLEAR  I_REC2.
    ENDLOOP.
      IF NOT I_REC2[] IS INITIAL.
        PERFORM DOWNLOAD .
        CLEAR I_REC2.
        REFRESH I_REC2.
       ELSE.
       WRITE : / ' no record exist due to unavailability of data'.
      ENDIF.
    ENDFORM.                               " LOCAL_DOWNLOAD
    *&      Form  UNIX_DOWNLOAD
    FORM UNIX_DOWNLOAD.
    LOOP AT REC1.
    REC1-CLNT = SY-MANDT.
    REC1-S_SYS = SY-SYSID.
    MOVE:  REC1-BAL TO I_REC2-BAL,
            REC1-COAREA TO I_REC2-COAREA,
          REC1-CA TO I_REC2-CA,         
            REC1-KTOPL TO I_REC2-CA,       
            REC1-CCODE TO I_REC2-CCODE,
            REC1-CREDIT TO I_REC2-CREDIT,
            REC1-CURRENCY TO I_REC2-CURRENCY,
            REC1-CURTYPE TO I_REC2-CURTYPE,
            REC1-DEBIT TO I_REC2-DEBIT,
            REC1-YEAR TO I_REC2-YEAR,
            REC1-FY TO I_REC2-FY,
            REC1-ACCOUNT TO I_REC2-ACCOUNT,
            REC1-VER TO I_REC2-VER,
            REC1-VTYPE TO I_REC2-VTYPE,
            SY-MANDT TO I_REC2-CLNT,
            SY-SYSID TO I_REC2-S_SYS,
            REC1-INDICATOR TO I_REC2-INDICATOR.
    APPEND I_REC2.
    CLEAR  I_REC2.
    ENDLOOP.
      IF NOT I_REC2[] IS INITIAL.
        PERFORM WRITE_TO_SERVER.
        CLEAR I_REC2.
        REFRESH I_REC2.
      ELSE.
       WRITE : / ' no record exist due to unavailability of data'.
      ENDIF.
    ENDFORM.                               " UNIX_DOWNLOAD
    *&      Form  HEADER_TEXT
          text                                                           *
    -->  p1        text
    <--  p2        text
    *form header_text.
      concatenate c_bal c_ba c_ca c_cc  c_credit c_currency c_curtype
         c_debit c_fisyear c_fisvar c_acct c_ver c_vtype c_indicator
               into t_strhd
               separated by c_comma.
      append t_strhd.
    *endform.                               " HEADER_TEXT
    *&      Form  HEADER_TEXT1
          text                                                           *
    *form header_text1.
      concatenate c_bal c_ba c_ca c_cc  c_credit c_currency c_curtype
        c_debit c_fisyear c_fisvar c_acct c_ver c_vtype c_indicator
               into t_strhd1
               separated by c_comma.
      append t_strhd1.
      transfer t_strhd1 to p_unfil.
    *endform.                    " HEADER_TEXT1
    *&      Form  COLLECT_DATA
          Collect Data                                                   *
    FORM COLLECT_DATA.
    SELECT * FROM GLT0 INTO  TABLE REC3
                        WHERE   BUKRS IN COMPCODE
                        AND     RYEAR IN FISYEAR
                        AND     RPMAX IN FISCPER
                        AND     RACCT IN GLACC
                        AND     RTCUR IN  CURRENCY.
    SELECT KTOPL FROM SKA1
                 INTO TABLE T_KTOPL
                 FOR ALL ENTRIES IN REC3
                 WHERE SAKNR = REC3-RACCT.
    LOOP AT REC3 .
       select *
       from glt0
       into table t_temp
       where rldnr = rec-rldnr
         and rrcty  = rec-rrcty
          and rvers  = rec-rvers
         and bukrs = rec-bukrs
         and ryear = rec-ryear
          and racct  = rec-racct
           and rbusa  = rec-rbusa
           and rtcur <> 'ZAR'
         and rpmax  = rec-rpmax.
    if sy-subrc = 0.
            rec1-bal = '0.00'.
    else.
      rec1-bal = rec-hslvt.
      endif.
    *READ TABLE T_KTOPL WITH KEY SAKNR = REC-RACCT BINARY SEARCH.
    MOVE T_KTOPL-KTOPL TO REC3-KTOPL.
    CLEAR:  CBALANCE, DBALANCE.
    REC1-BAL = REC3-HSLVT.
    IF REC3-DRCRK = 'S'.
    IF REC3-HSLVT NE C_ZERO.
           YEAR   = REC-RYEAR.
           PERIOD = '000'.
           CONCATENATE PERIOD C_DOT YEAR INTO FP.
           REC1-INDICATOR = REC-DRCRK.
           REC1-DEBIT = C_ZERO.
           REC1-CREDIT = C_ZERO.
           REC1-CCODE = REC-BUKRS.
           REC1-YEAR  = FP.
           REC1-CURRENCY = REC-RTCUR.
           REC1-ACCOUNT  = REC-RACCT.
           rec1-bal      = rec-hslvt.
           dbalance = rec1-bal.
           REC1-CURTYPE = C_CTYPE.
           REC1-FY      = C_FY.
           REC1-COAREA   = REC-RBUSA.
           REC1-VER     = REC-RVERS.
           REC1-VTYPE   = C_CTYPE.
           REC1-CA      = C_CHART.
           APPEND REC1.
            C = 0.
          PERFORM D.
    ENDIF.
    IF REC3-HSL01 NE C_ZERO.
            YEAR   = REC3-RYEAR.
            PERIOD = '001'.
            CONCATENATE PERIOD C_DOT YEAR INTO FP.
            REC1-INDICATOR = REC3-DRCRK.
            REC1-DEBIT = REC3-HSL01 .
            REC1-CCODE = REC3-BUKRS.
            REC1-YEAR  = FP.
            REC1-CURRENCY = REC3-RTCUR.
            REC1-ACCOUNT  = REC3-RACCT.
           rec1-bal      = REC3-hsl01 + dbalance.
           dbalance = rec1-bal.
            REC1-CURTYPE = C_CTYPE.
            REC1-FY      = C_FY.
            REC1-COAREA   = REC3-RBUSA.
            REC1-VER     = REC3-RVERS.
            REC1-VTYPE   = C_CTYPE.
          REC1-CA      = C_CHART. 
            REC1-KTOPL = REC3-KTOPL. 
            APPEND REC1.
            C = 1.
         PERFORM D.
    ENDIF.
    IF  REC3-HSL02 NE C_ZERO.
          REC1-DEBIT = REC3-HSL02.
       YEAR   = REC3-RYEAR.
       PERIOD = '002'.
      CONCATENATE PERIOD C_DOT YEAR INTO FP.
         REC1-INDICATOR = REC3-DRCRK.
       REC1-DEBIT = REC3-HSL02.
       REC1-CCODE = REC3-BUKRS.
       REC1-YEAR  = FP.
       REC1-CURRENCY = REC3-RTCUR.
       REC1-ACCOUNT  = REC3-RACCT.
      rec1-bal      = REC3-hsl02 + dbalance.
      dbalance = rec1-bal.
            REC1-CURTYPE = C_CTYPE.
            REC1-FY      = C_FY.
            REC1-COAREA   = REC3-RBUSA.
            REC1-VER     = REC3-RVERS.
            REC1-VTYPE   = C_CTYPE.
          REC1-CA      = C_CHART. "-BF7957-070503
            REC1-KTOPL = REC3-KTOPL.  "+BF7957-070503
       APPEND REC1.
       C = 2.
    PERFORM D.
    ENDIF.
    IF  REC3-HSL03 NE C_ZERO.
            YEAR   = REC3-RYEAR.
            PERIOD = '003'.
            CONCATENATE PERIOD C_DOT YEAR INTO FP.
               REC1-INDICATOR = REC3-DRCRK.
            REC1-DEBIT = REC3-HSL03.
            REC1-CCODE = REC3-BUKRS.
            REC1-YEAR  = FP.
            REC1-CURRENCY = REC3-RTCUR.
            REC1-ACCOUNT  = REC3-RACCT.
           rec1-bal      = REC3-hsl03 + dbalance .
           dbalance =  rec1-bal.
            REC1-CURTYPE = C_CTYPE.
            REC1-FY      = C_FY.
            REC1-COAREA   = REC3-RBUSA.
            REC1-VER     = REC3-RVERS.
            REC1-VTYPE   = C_CTYPE.
           REC1-CA      = C_CHART. "-BF7957-070503
             REC1-KTOPL = REC3-KTOPL. "+BF7957-070503
            APPEND REC1.
          C = 3.
    PERFORM D.
    ENDIF.
    IF  REC3-HSL04 NE C_ZERO.
           REC1-DEBIT = REC3-HSL04.
              YEAR   = REC3-RYEAR.
              PERIOD = '004'.
             CONCATENATE PERIOD C_DOT YEAR INTO FP.
                REC1-INDICATOR = REC3-DRCRK.
             REC1-DEBIT = REC3-HSL04.
              REC1-CCODE = REC3-BUKRS.
              REC1-YEAR  = FP.
              REC1-CURRENCY = REC3-RTCUR.
              REC1-ACCOUNT  = REC3-RACCT.
             rec1-bal      = REC3-hsl04 + dbalance .
            REC1-CURTYPE = C_CTYPE.
            REC1-FY      = C_FY.
            REC1-COAREA   = REC3-RBUSA.
            REC1-VER     = REC3-RVERS.
            REC1-VTYPE   = C_CTYPE.
          REC1-CA      = C_CHART.  "-BF7957-070503
            REC1-KTOPL = REC3-KTOPL.  "+BF7957-070503
            APPEND REC1.
             dbalance = rec1-bal.
              C = 4.
              PERFORM D.
    ENDIF.
    Thanks and Regards,
    Ram

    use logical database SDF, nodes ska1 and  skc1c
    A.

  • How can I add new row/column into existing jTable?

    Hi add!
    Can you help me how can I add new row/column into existing jTable?
    Tnx in adv!

    e.g
    Create two buttons inside the Table ( "Add New Row" ) and ("Add new Column")
    their handlers are:
    add new row:
    //i supose u already have
    DefaultTabelModel tablemodel = new DefaultTableModel(rowdata, columnNames);
    //and   
       JTabel jtable = new JTable(tablemodel);
    // Handler (row)
    jbtAddRow.addActionListener(new ActionListener(){
       public void actionPerformed(ActionEvent e) {
          if(jtable.getSelectedRow() >= 0 )
              tablemodel.insertRow(jtable.getSelectedRow(), new java.util.Vector());  
           else  
                tablemodel.addRow(new java.util.Vector());
        });to add new columns its the same but inside actionPerformed method:
    ask for e.g "Whats the name for the new column"
    then,
       tablemodel.addColumn(nameOfColumn, new java.util.Vector());   Joao
    Message was edited by:
    Java__Estudante

  • How can I combine two itunes accounts into one?

    How can I combine two itunes accounts into one?

    Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased.  Apple provides no way to change this.
    However, if you wish to put content from two accounts into a single iTunes library, you can easily do so.  Use the command File > Add File (or Folder) to Library.

  • How can I add a new column in compress partition table.

    I have a compress partition table when I add a new column in that table it give me an error "ORA-22856: CANNOT ADD COLUMNS TO OBJECT TABLES". I had cretaed a table in this clause. How can I add a new column in compress partition table.
    CREATE TABLE Employee
    Empno Number,
    Tr_Date Date
    COMPRESS PARTITION BY RANGE (Tr_Date)
    PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
    PARTITION JUNK Values LESS THAN (MAXVALUE));
    Note :
    When I create table with this clause it will allow me to add a column.
    CREATE TABLE Employee
    Empno Number,
    Tr_Date Date
    PARTITION BY RANGE (Tr_Date)
    PARTITION FIRST Values LESS THAN (To_Date('01-JUL-2006','DD-MON-YYYY')),
    PARTITION JUNK Values LESS THAN (MAXVALUE));
    But for this I have to drop and recreate the table and I dont want this becaue my table is in online state i cannot take a risk. Please give me best solution.

    Hi Fahed,
    I guess, you are using Oracle 9i Database Release 9.2.0.2 and the Table which you need to alter is in OLTP environment where data is usually inserted using regular inserts. As a result, these tables generally do not get much benefit from using table compression. Table compression works best on read-only tables that are loaded once but read many times. Tables used in data warehousing applications, for example, are great candidates for table compression.
    Reference : http://www.oracle.com/technology/oramag/oracle/04-mar/o24tech_data.html
    Topic : When to Use Table Compression
    Bug
    Reference : http://dba.ipbhost.com/lofiversion/index.php/t147.html
    BUG:<2421054>
    Affects: RDBMS (9-A0)
    NB: FIXED
    Abstract: ENH: Allow ALTER TABLE to ADD/DROP columns for tables using COMPRESS feature
    Details:
    This is an enhancement to allow "ALTER TABLE" to ADD/DROP
    columns for tables using the COMPRESS feature.
    In 9i errors are reported for ADD/DROP but the text may
    be misleading:
    eg:
    ADD column fails with "ORA-22856: cannot add columns to object tables"
    DROP column fails with "ORA-12996: cannot drop system-generated virtual column"
    Note that a table which was previously marked as compress which has
    now been altered to NOCOMPRESS also signals such errors as the
    underlying table could still contain COMPRESS format datablocks.
    As of 10i ADD/SET UNUSED is allowed provided the ADD has no default value.
    Best Regards,
    Muhammad Waseem Haroon
    [email protected]

  • How can i add two values under the same property?

    Hi all,
    How can i add two values under the same property name in a
    prop list? For example:
    [question1: "item1","item2", question2: "item3","item4"]
    To be more precise, i am creating a property list and I want
    whenever a two values have the same property name to be added int
    he list under the same property. For example:
    gMyList.AddProp (#""&question&"" & x,
    member("input").text)
    question is a variable that is updated fromt he user's input.
    Now, whenever somethign like this happens:
    question = "question1"
    member("input").text = "five"
    question = "question1"
    member("input").text = "six"
    I want to output list to be:
    [question1: "five","six"] and so on
    Any ideas?

    Maybe you could make each property a list (so you have a
    property list full
    of lists), and add multiple values to the list held in a
    particular
    property?
    Cheers
    Richard Smith

  • How can I add a new column to an Attachments Table

    How can I add a new column to an Attachments Table??
    And I want to remove the usage column also!
    Thanks!

    I tried to remove the usage column doing this:
    OAAttachmentTableBean attachTable = (OAAttachmentTableBean)webBean.findChildRecursive("attachTable");
    if (attachTable != null)
    attachTable.findChildRecursive("UsageTypeColumn").setRendered(false);
    but I'm getting null pointer exception on "UsageTypeColumn"...
    :(

  • How to read a table and transfer the data into an internal table?

    Hello,
    I try to read all the data from a table (all attribute values from a node) and to write these data into an internal table. Any idea how to do this?
    Thanks for any help.

    Hi,
    Check this code.
    Here i creates context one node i.e  flights and attributes are from SFLIGHT table.
    DATA: lo_nd_flights TYPE REF TO if_wd_context_node,
            lo_el_flights TYPE REF TO if_wd_context_element,
            ls_flights TYPE if_main=>element_flights,
            it_flights type if_main=>elements_flights.
    navigate from <CONTEXT> to <FLIGHTS> via lead selection
      lo_nd_flights = wd_context->get_child_node( 'FLIGHTS' ).
    CALL METHOD LO_ND_FLIGHTS->GET_STATIC_ATTRIBUTES_TABLE
      IMPORTING
        TABLE  = it_flights.
    now the table data will be in internal table it_flights.

  • How can I add keywords for SEO into the code?

    How can I add keywords (for SEO) into the code of a Muse designed site?

    You might also be interested in the upcoming MuseJam on Thursday Muse Jam: Search Engine Optimization | Facebook
    Muse Jam: Search Engine Optimization
    Online May 22, 2013
    Join Principal Product Manager Dani Beaumont of the Adobe Muse team as she explores ways within the Muse application to build search engine optimized sites by way of metadata, keywords, H1 definitions, and sitemap generation. After the presentation we'll open the floor to any questions you might with the application.

  • How to send multiple row data into an internal table??

    I have a view with table control.i want to select multiple row and send all the row data into an internal table.i am able to select multiple row but all the selected row data is not going to the internal table.....only a particular row data which is lead selected is going.
    Do anyone can help me regarding this issue?
    Thanks in advance,
    Subhasis.

    Hey,
    Some code example:
    declaring an internal table and work area to get all the elements from the node.
    data : lt_Elements type  WDR_CONTEXT_ELEMENT_SET,
             ls_Element type  WDR_CONTEXT_ELEMENT_SET,
    considering flights is my node.
             lt_data type sflight.
    Node_Flights is the ref of the node to which ur table is binded.
    Use Code Inspector to read the node.
    lt_Element = Node_Flights->GET_ELEMENTS
    loop at lt_elements into ls_Element.
    l_bollean =   ls_elements->is_selected ( returns abap true/false ).
        if l_bollean IS INITIAL.
           append ls_Element to lt_data.
       endif.
    Hope this would help.
    Cheers,
    Ashish

  • How can I read the trace data into LabVIEW for E5071B

    HI 
    I am setting up the measurement using vector network analyzer (VNA) E5071B controlled by NI 488.2. How can I read the trace data into LabVIEW and display on the graph? If anyone having an idea or know well about this process please give me the suggestion, I will much appreciate it.
    Many Thanks

    You want to start with the driver
     In case you do not know it, you can do the driver search in LabVIEW from Tools>Instrumentation>Find Instrument Drivers. You might also want to bookmark the Instrument Driver Network for information on what a driver is and how to use it.

  • Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

    hi friends
    using `n   how can i add two empty line (two carriage return), between these two lines in the output file?
    PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
    PS C:\> $Env:USERDOMAIN  | add-content c:\file.txt
     i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt   but it results in 
    myPCMyDomain
    but i wanted the contents of the output file be like this:
    MyPC
    #empty line here 
    #empty line here
    MyDomain
     i tested many other forms but didn't work.
    thanks

    I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
    You are using a Unicode file.  Locale is what?
    If you just want notepad compatible line breaks then do this:
    del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
    Look in hex to see that `n is ^L or 0xA and is only one character.  CrLf is 0xD 0xA - two characters.
    My programmers editors and VS all understand a single ^L as a line break so does PowerShell.  Only DOS/Notepad and other utilitis don't understand this..
    ¯\_(ツ)_/¯

  • Writing a stored procedure to import SQL Server table data into a Oracle table

    Hello,
    As a new DBA I have been tasked with writing a stored procedure to import SQL Server table data into an Oracle table. I have been given many suggestions on how to do it from SQL Server but I I just need to write a stored procedure to run it from the Oracle side. Suggestions/guidance on where to start would be greatly appreciated! Thank you!
    I started to write it based on what I have but I know this is not correct :/
    # Here is the select statement for the data source in SQL Server...
    SELECT COMPANY
    ,CUSTOMER
    ,TRANS_TYPE
    ,INVOICE
    ,TRANS_DATE
    ,STATUS
    ,TRAN_AMT
    ,CREDIT_AMT
    ,APPLD_AMT
    ,ADJ_AMT
    ,TRANS_USER1
    ,PROCESS_LEVEL
    ,DESCRIPTION
    ,DUE_DATE
    ,OUR_DATE
    ,OUR_TIME
    ,PROCESS_FLAG
    ,ERROR_DESCRIPTION
      FROM data_source_table_name
    #It loads data into the table in Oracle....   
    Insert into oracle_destination_table_name (
    COMPANY,
    CUSTOMER,
    TRANS_TYPE,
    INVOICE,
    TRANS_DATE,
    STATUS,
    TRANS_AMT,
    CREDIT_AMT,
    APPLD_AMT,
    ADJ_AMT,
    TRANS_USER1,
    PROCESS_LEVEL,
    DESCRIPTION,
    DUE_DATE,
    OUR_DATE,
    OUR_TIME,
    PROCESS_FLAG,
    ERROR_DESCRIPTION)
    END;

    CREATE TABLE statements would have been better as MS-SQL and Oracle don't have the same data types.
    OUR_DATE, OUR_TIME will (most likely) be ONE column in Oracle.
    DATABASE LINK
    Personally, I'd just load the data over a database link:
    insert into oracle_destination_table_name ( <column list> )
    select ... <transform data here>
    from data_source_table@mssql_db_link
    As far as creating the database link from Oracle to MS-SQL ... that is for somebody else to answer.
    (most likely you'll need to use an ODBC driver)
    EXTERNAL TABLE
    If the data from MS-SQL is in a CSV file, just use and external table.
    same concept:
    insert into oracle_destination_table_name ( <column list> )
    select ... <transform data here>
    from data_source_external_table
    MK

  • Can i add two country holiday on my iCal and see them at the same time?

    Can i add two country holiday on my iCal and see them at the same time? HOW?

    Just subscribe to the appropriate calendars: you can subscribe to as many as you like.
    http://www.apple.com/downloads/macosx/calendars/

Maybe you are looking for

  • Error in SAOP adapter : RFC to SOAP Synch Scenario

    Hi Experts, Scenario is "RFC to SOAP Synch". For creating this following this link : **************** - Scenario on RFC to SOAP Trying to send XML to SOAP receiver. Using Below details for SOAP: Website : http://www.webservicex.net/WS/WSDetails.aspx?

  • How to Add/Edit validation rule for Column in ADf table(Jdeveloper11g)

    I am working on Jdevloper11g with ADF table. There i have one column where user can enter numeric value in range 1-1000 .So i have to add validation as such he/she can't enter value apart from 1-1000 range also not any other charcters. I know on form

  • Acrobat 11 installation.

    What are the steps to "move" Acrobat 11 from my old computer to my new computer?

  • CAN I GET MY FULL SCREEN CALLER ID BACK?

    PLEASE TELL ME WE WILL NOT HAVE TO KEEP THE TINY LITTLE PIC ? I WANT THE PIC I TOOK SUCH CARE IN TAKING OF MY FRIENDS TO SHOW UP WHEN THEY CALL , NOW ONLY NOT TO HARDLY SEE WHO IS CALLING ! NOT GOOD ! PLEASE PUT IT BACK

  • Merge Module and Service Paks

    Post Author: iboulder CA Forum: Deployment Hello, Can anyone tell me what service pak the Crystal Reports 9.0 merge module is at?  The merge module appears to be new than SP 3, but older than SP 7. Also, can anyone tell me were to get the merge modul