How can I allow a user to control my Edge Animation using only the scrollbar?

I have seen a few examples of an Edge Animation being conrolled by the scrollbar, and I am wondering how I could achieve the same effect.
Example:
http://dominikruckli.ch/scrolltest/scrolltest.html
I have searched the corners of the internet and have found 2 or 3 different tutorials, but none of them have proven successful.
In basic terms, I am creating an animation that involves a character getting from Point A to Point B, from the beginning of my timeline to the end.
Rather than exporting my animation so that it plays automatically, by itself, I would like for a user to scroll vertically, and the playing of the animation moves in conjunction with the scroll bar.
As the user scrolls from top to bottom on the scrollbar, the character in my animation moves from Point A to Point B.
Also, if the user stops scrolling... the character will stop moving as well.
In addition, I would like the surrounding area, outside of my stage, to remain hidden. I do not want to allow the user the ability to scroll around and see off of my designated stage area. I only want the scroll bar to act as a playhead for the animation.
Any help will be greatly appreciated.
Thank you
Note:
If you have special CSS (or other form of Code), please provide specific instructions on how to insert this code, where it should be located, what part(s) of the code should be altered, and any additional instructions on how to apply any form of coding. (Screenshots would be amazing)

Never mind.  I figured it out myself.  I changed the myComp.play("scenefour"); to myComp.getStage().play("scenefour"); and it worked fine. 

Similar Messages

  • How can I allow other users on my macbook to view my iphoto library when th

    How can I allow other users on my macbook to view my iphoto library when they are logged in. I do not have a network, and the users (my family) all log in seperately when they use the computer. Does anyone know? Thank you.

    rdoss
    Welcome to the Apple Discussions.
    If you want others to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account(s). In the other account(s), enable 'Look For Shared Libraries'. Your Library will appear in their source pane.
    Remember iPhoto must be running in both accounts for this to work.
    Regards
    TD

  • How can I allow a user (client) to choose a local image file (on his hard d

    How can I allow a user (client) to choose a local image file (on his hard drive) and modify it using an applet from his browser ? I am trying to develop a web page that enables the user to choose an Image file, manipulate the image using a java applet, and display the results.
    Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. On the other hand, I can choose and upload any file using a JavaScript form:
    <FORM METHOD="POST" ENCTYPE="multipart/form-data" ACTION="process.asp">
    <INPUT TYPE=FILE NAME="file1"><BR>
    �
    It seems that I can choose an image file with a Java script form and process an image with an applet. How can I choose a file AND process it locally ?
    (I do not wish to upload the file to the server using JavaScript form and then back to the client�s applet for processing since it will be a tremendous waste of resources).
    Will appreciate any solution.
    Thanks !
    ( my email is: [email protected] )

    "Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. "
    You can do this if you sign the applet...

  • How can I obtain my licenses if another email address was used for the purchase?

    How can I obtain my licenses if another email address was used for the purchase?

    Hi 79bison,
    Welcome to Adobe Forum,
    You will have to log in with to www.adobe.comfor retail purchase or licensing.adobe.com if Volume licenses with the E-mail with which it is registered
    Then you can retrieve the serial number, you can opt for transfer of license to get it registered with your Email, if applicable & eligible.
    You can contact Adobe Support for further assistance at http://adobe.ly/yxj0t6.
    Hope it helps you.
    Rajshree

  • How can I allow Contribute Users to save documents somewhere other than "docs"?

    Our website was rebuilt by an outside company, who took my file structure and dumped it into the new site (I use Dreamweaver and our staff uses Contribute for their little niche of the web). We have a large site with multiple folders within the site. Those folders have several folders below them to sub-divide the tons of info we have to keep straight. However when I set up the parameters for the Contribute users, I only seemed to have one option to save documents (the "docs" folder).
    I need for Contribute users to be able to save documents/files deeper in the file structure. How can I do that?
    Thanks for any assistance! I hope this made sense.
    Mark

    The answer depends on how "good" your Contribute users actually are. By default, Contribute always places documents in the same folder as the page in a "documents" folder. I see two potential options: (1) the user(s) needs to go to the where the document needs to live and place the link at that level or (2) you can show your user the "Publish File From My Computer" (under file, in the third section) which would allow them to place the document in the correct location and then link to it from whatever page is appropriate. Personally, that would be a last choice.

  • How can I allow normal user change their LDAP password?

    I use Solaris10 + Sun Directory server 5.2SP6 + Samba, how can allow normal user change the password themselves?
    Thanks.

    Depends on application you are using. I use ColdFusion and here is how I allow users to change their passwords
                        <cfldap action="Modify"
                             dn="uid=#form.UserLogin#,ou=your_ou,dc=example,dc=com"
                             attributes="userpassword=#FORM.newPassword#"
                             server="#servername#"
                             Port="#portnumber"
                             username="uid=#form.UserLogin#,ou=your_ou,dc=example,dc=com"
                             password="#form.userpassword#">

  • How can I allow multiple users on XP pro to use the same itunes files

    I'm new to this iPod/iTunes stuff and i would like to allow my family to use all the songs that I have on the computer. I installed iTunes 7.0 and loaded all 1800 songs using my user profile. I then let my wife signon and when i opened iTunes she couldn't see all the songs. I placed the iTunes directory in the /All Users/Shared Documents/shared music folder and i made the change to the iTunes preferences.
    Other users on the same machine still can't see all the music.
    What am I doing wrong?

    You're half-way there, GrezGolfer.
    To get to the finish line, make sure it's the iTunes Music folder, not the iTunes folder, you've put in the Shared Documents folder. (see http://docs.info.apple.com/article.html?artnum=93195 for details.)
    And finally, follow the instructions in the last part of that Knowledge Base article for each user - File menu > Add Folder to Library ...

  • How can I allow multiple users to edit a single shared iCal calendar?

    Is it possible to allow multiple users to edit a single shared iCal calendar? I also want to provide different permissions to those users. Is this possible through .MAC? Is it possible on Mac OSX Server?

    I would like 2 agenda synced through .Mac but it does not work.
    I have 2 computers and 2 laptops. A very simple agenda with 3 calenders. Myself my partner and the office calender. I want to publish my calender and that of my partner. The office calender I would like to sync so that we can change the office calender at any location.
    I set up sync only for iCall and have a .Mac account. When I change anything on any of the calenders in iCall nothing happens on any of my other locations. Even though the locations are registered as synced. I can see the sync wheel turning but at the end of it the calenders are not synced.
    At this moment I fully understand the publish and unpublished calenders but have no clue what so ever what syncing does for iCall. There seems to be no functionality to it. It does not transport any calender info over .Mac. There is no visable check to see what is happening and the process of syncing is not transperent. Lots of my friends go to me for advise on Apple issues but as far as sync wether iCall or Addressbook I always tell them sync does not work and I have no clue why others have it working. I haven't met any people here in Holland either that got in working. I suppose with iCall you have to get third party software to share calenders editable calenders. Really hopeless situation, wish Apple would just have a manual stating what sync can do and what it can not. Hours wasted on this issue trying to get it to work.
    Hope anyone here can help out.

  • How can I allow network users to use File Sharing on 10.8 Server?

    I am in the process of setting up a new OS X 10.8 Server. I have exported/imported the network users from my previous OS X 10.6.8 Server using Workspace Manager. I have re-entered the passwords of the users. I have existing clients running (stil logged in).
    I have set up the File Sharing service in Server.app. I have several mount points. I have made the Users mount point available for home directories over AFP.
    Now, the system administrator can connect to the server and get access to the file shares. So the basic file sharing system works.
    Also: the users on a client can get there password verified (e.g. when unlocking screen protection) by the server. It is just AFP they can't get access to, while the system administrator account (OD /Local on the server) can be used. So, the password in the server is OK too. It seems to be a matter of privileges.
    But no network user (OD user in directory /LDAPv3/127.0.0.1 on the server) can get access. Where can I give network users privileges for File Sharing on the server?
    I did try to add either the "Open Directory Users" group or a specific user that was imported into com.apple.access_afp. If I do that, there is partial success. I can connect to the server from the client with a user account other than system administrator from the server (but connecting is slow). But Mobile Home Sync does not work:
    1:: [13/04/05 16:11:10.379] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:11:20 +0000
    1:: [13/04/05 16:11:20.782] ==========================================================
    0:: [13/04/05 16:11:20.782] Starting automatic sync of "HomeSync_Mirror".
    1:: [13/04/05 16:11:20.786] Peer "network" reports changes since last sync.
    1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:alias:]: isRemote = NO
    1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: peer = <SPeer_FS:0x7fd5a5009520> = local, optionalStoreID = (null), peer.storeIDString = *
    1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootPath        = /Users/gerben
    1:: [13/04/05 16:11:20.786] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: storePath       = /Users/gerben/.FileSync/store.filesyncstatetree
    1:: [13/04/05 16:11:20.787] [0x7fd5a9224760/<SStore_FS:0x105db3420>] +[SStore_FS newStore_FSForPeer:rootPath:rootAlias:rootRef:storePath:optionalStoreID:]: rootAlias       = {path='/Users/gerben', targetName='gerben', volumeName='Macintosh HD', type=DIR, volumeCreateDate=2010-08-10-12:58:16, targetCreateDate=2011-08-28-18:39:13, parentDirID=37638, nodeID=3003598, filesystemID=0000 ('0000'), signature=0x482b ('H+'), isBootVolume=YES, isAutomounted=NO, isEjectable=NO, hasPersistentFileIDs=YES, mounted=YES, url='file://localhost/'}
    0:: [13/04/05 16:11:20.789] -[SPeer_FS _mountServerCallbackShares:status:]: received error 64
    0:: [13/04/05 16:11:20.790] EXCEPTION: _mountServerCallbackShares:status: (Host is down) <-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64">
    0:: [13/04/05 16:11:20.790] USERINFO: {
    0:: [13/04/05 16:11:20.790]     NSLocalizedDescription = "Host is down";
    0:: [13/04/05 16:11:20.790] }
    0:: [13/04/05 16:11:20.790] BACKTRACE: {
    0:: [13/04/05 16:11:20.790] ? | 0x105cb79b7  
    0:: [13/04/05 16:11:20.790] ? | 0x105cbf0e5  
    0:: [13/04/05 16:11:20.790] ? | 0x105c2c866  
    0:: [13/04/05 16:11:20.790] ? | 0x105c2babd  
    0:: [13/04/05 16:11:20.790] ? | 0x105c2acb4  
    0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb72a
    0:: [13/04/05 16:11:20.790] ? | 0x7fff858bb6a2
    0:: [13/04/05 16:11:20.790] ? | 0x7fff874cf8bf
    0:: [13/04/05 16:11:20.790] ? | 0x7fff874d2b75
    0:: [13/04/05 16:11:20.790] }
    1:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. (-[SPeer_FS mountPeerVolumeWithURLString:] (Peer-FS.m:446): "'(-1)' error 64")
    0:: [13/04/05 16:11:20.790] Peer "network" is unable to sync. Not enough peers will be available to continue syncing.
    0:: [13/04/05 16:11:20.790] Aborting sync of "HomeSync_Mirror".
    1:: [13/04/05 16:11:20.790] -[SPeer abortSync] "local"
    1:: [13/04/05 16:11:20.797] -[SStore_FS setupWithAlias:andRef:] (Store-FS.m:447): unlink('/Users/gerben/.FileSync/.fstemp.QW1Gh-bhvgEhVwmG3.noindex')
    0:: [13/04/05 16:11:20.798] EXCEPTION: !IF <-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'">
    0:: [13/04/05 16:11:20.798] BACKTRACE: {
    0:: [13/04/05 16:11:20.798] ? | 0x105c2bb66  
    0:: [13/04/05 16:11:20.798] ? | 0x105c2acb4  
    0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb72a
    0:: [13/04/05 16:11:20.798] ? | 0x7fff858bb6a2
    0:: [13/04/05 16:11:20.798] ? | 0x7fff874cf8bf
    0:: [13/04/05 16:11:20.798] ? | 0x7fff874d2b75
    0:: [13/04/05 16:11:20.798] }
    1:: [13/04/05 16:11:20.798] -[SStore_FS deleteStateTreeTurdFile] (Store-FS.m:476): unlink('/Users/gerben/.FileSync/store.filesyncstatetree.statetree_dirty')
    1:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. (-[SPeer(protected) doPrepareForSyncWithResolvedConflicts:] (Peer.m:1149): "'(([self checkAbort]))'")
    0:: [13/04/05 16:11:20.798] Peer "local" is unable to sync. Not enough peers will be available to continue syncing.
    1:: [13/04/05 16:11:20.798] EXCEPTION: SFAbortedException <-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'">
    1:: [13/04/05 16:11:20.798] -[SSyncEngine threadMain_SyncEngine_sync:]: sync failed with exception "-[SSyncEngine _waitForPeers:] (SyncEngine.m:1922): "'(_abort)'"".
    0:: [13/04/05 16:11:21.066] Sync of "HomeSync_Mirror" encountered errors. (_mountServerCallbackShares:status: (Host is down))
    0:: [13/04/05 16:11:21.067] Last successful sync completed at 2013-04-04 20:17:15 +0000.
    0:: [13/04/05 16:11:21.067] Finished sync of "HomeSync_Mirror".
    1:: [13/04/05 16:11:21.067] Scheduling next sync of "HomeSync_Mirror" at 2013-04-05 14:31:21 +0000
    1:: [13/04/05 16:11:21.284] 1-pass sync of "HomeSync_Mirror" took 0.02 seconds

    Hi Gerben,
    Try creating a brand new user, that's not imported and see if that works. Every user/group has a little gear in the Server.app/Users or Groups which allows specific access to specific services, perhaps filesharing is off in that section?
    Is your DNS setup properly? Can you verify that clients can see the FQDN of your server?
    After setting up the Users folder for mobilehomes, did you check whether the group and the separate users have access to filesharing? I am able to select the correct homefolder /Users and restrict the homefolder size.
    Goodluck!
    Jeffrey

  • How do you allow multiple users share a common folder that is on the doc?

    I'm coming from many years as an OS 8.6 user. My family expects me to wade though all of the documentation and figure out how to make using the computer easy. One feature they liked was the way I set up the Apple Menu so that only the programs were listed. The categories were Applications, Diversions, Internet, and Utilities. This masked all of the other stuff that may have been associated with a program from them.
    I would like to do the same in OS X (10.4.7). So, in /users/shared I created a folder named of all things "Apple Menu". In this folder I've created new folders for Applications, Diversions, Internet, and Utilities. Into these folders I placed aliases to the various programs. I then took this folder and dragged it to the Doc. On my Doc, with I control click the "Apple Menu" folder, I see my folder names with drop downs listing all of the aliases just like in OS 8.6. Unfortunately, on the other user accounts after dragging the folder /users/shared/apple menu to the Doc, they can only see aliases to files that came with the system. They can not see any of the new files that I've added. How do I set this up so that I maintain one folder of the aliases to various programs and yet every account can see all of these aliases?
    I don't want the Doc cluttered with applications that are not used all of the time. At the same time I don't want to have to navigate to some sub-directory and scan a list of files looking for the application everytime I want to run it. The rest of my family members would go nuts. As a matter of fact, I think I would also. I liked the Apple Menu in OS 8.6. I think this Doc folder thing might just work, if I can get past this security/permissions issue.
    Thanks for the advice.
    Joe
    17" iMac G5   Mac OS X (10.4.7)   various Mac running OS 8.6

    Thanks for the suggestions offered so far, but they don't get to the root of the issue. I only want to maintain one, and only one, "Apple Menu" folder. I'm not looking to restrict user access. I'm trying to streamline user access for those who are not comfortable navigating down 2 or 3 or more levels of directories looking for the "applications". As Administrator I do this at the time an application is installed and place an alias to the application in the appropriate "Apple Menu" folder so that my family members can quickly and easily access it.
    I built the "Apple Menu" folder and placed it in /user/shared. I also built all of the aliases to the applications and placed them in the appropriate sub folder of "Apple Menu". I've chosen, "Applications", "Diversions", "Internet", and "Utilities" as the sub folders.
    Some of the aliases, while logged into a non-administrator account do not show up in the "Apple Menu" while others do. For example TextEdit appears while TextWrangler, which I installed does not. I thought that only programs that I installed are not showing up, but this is not true. I installed Reunion and this program is visible from the non-administrator accounts. Yet I can navigate to the item not appearing in the "Apple Menu" and launch it.
    The top folder's owner is myself, the group is "wheel" and it has read permission, and everyone has read permission. I've made myself and the other users members of the group wheel. And I've propogated these values down the folder hierarchy starting at "Apple Menu". I would like to know why this isn't working?
    Though Classic Apple Menu and XMenu sound like good alternatives in each case I would be responsible for setting these applications up in each environment. I only want to do this set up once as administrator and know that all of system's users have access to this information from the Dock.
    Is there some kind of installation step missing that is not permitting these aliases from being seen by all of the system's users?
    Again, thanks for the advice,
    Joe

  • How can I capture delete user event in Active Directory 2008 using Powershell command

    Hi,
    In my Active Directory every user have own home drive in the file server. When I delete user I also need to delete folder from the server. 
    My target is make the process automated, so that when I delete user account form AD, the folder associate with user also delete.
    Can I write any power shell script to grep the delete event  and remove folder from file server.
    Thanks
    Tamim Khan

    You can setup event viewer to provide alerts (email alerts) for event id 630.
    Find an existing Event ID 630 entry, right click on it and "Attach Task To This Event...."
    Follow the wizard.
    ** Event ID Sample **
    Event ID: 630
    Type: Success Audit
    Description: User Account Deleted:
    Target Account Name: %1 Target Domain: %2
    Target Account ID: %3 Caller User Name: %4
    Caller Domain: %5 Caller Logon ID: %6
    Privileges: %7
    - Chris Ream -
    **Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

  • How can I login with a broken letter of my keyboard used in the password?

    I broke the letter "i" from my keyboard and I need to use  it when a login! Therefore, I cant login. How can I substitute it? Is there any character?

    Take another physical keyboard, connect it, then change password with something without letter i. From now on, you may use that mac without letter i.
    After logging in, you may use Keyboard Viewer with your mouse and may type i as well, if need be.

  • How can we allow internal users to access internet through ASA firewall?

    Hello,
    I am new to security track, i have been asked to setup lab and allow users from inside firewall to access internet. here is my lab setup
    PC -> switch 1 (layer2) -> (inside) ASA (outside) -> switch 2 (Layer2) -> Router
    does switch 2 port needs internet access through router?
    what configuration required on ASA to allow users behind the firewall to access internet?
    any help on this would be much appreciated.
    thanks,

    Hi,
    Okay , can you clarify on this for me. Are you able to ping the internet from the ASA outside interface ?
    Just try something like this:-
    ping 4.2.2.2 .. Does this work ?
    If this does not work , then i think the ASA even is not able to get to the internet and that would be a problem on the router.
    Also , internet from Switch 2 is not a requirement as that is only a Layer 2 device.
    You can assign the ISP allocated address on the PC , connect it to the Switch 2 port and then try to ping something on the internet or surf internet and i think that should work.
    Thanks and Regards,
    Vibhor Amrodia

  • How can I allow standard users to update creative cloud without admin rights.

    I have over 300 users in a domain environment  and I cannot allow them to have admin rights on the machines.Is there a Registry hack or key that we can adjust to allow CC to update without these rights?

    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • How can i allow java in parental control

    Hello,
    I want to allow my son to play to minecraft (wich works with java) . I'm adding minecraft to the list of application that he can access (using parental controls)
    But when I launch minecraft it ask me to authorize the usage of the application. When I click on always authorize (Toujours autoriser in french) , it keeps asking me the same question. I'm entering the correct admin username and passowrd.
    Whenever I click Authorize once, it ask me the admin username and password and then launches minecraft. so it works.
    Thank you
    Best regards
    Jean

    Thanks Liam.
    I imagined that might be the case, but had to ask in case someone found a way.
    I guess I could manually set up subdomains and point them to the individual web-app items. Lot of manual work though. The main purpose would be to give customers a nice tidy URL for them to share. 'myName.thatSite.com' is much better for sharing than 'thatSite.com/profile/myName', even if it ends up showing as 'myName.thatSite.com/profile/myName'
    I thought having subdomain wildcards enabled might help -  javascript might be able to redirect to the relevant item - but apparently this is not posible with current BC systems.
    Do you know if BC are planning to add any API functionality to the site domain management features
    Or if they'd perhaps add subdomain wild-cards?
    Seems unlikely, but I wonder if this might make something possible.
    Cheers,
    Adrian

Maybe you are looking for