How can I arrange the need for 2 (successive) commands before a message is actually sent?

In outlook express i have to use 2 successive commands before a message is actually sent. Can i have this also in Thunderbird?

well perhaps you could say what those commands are? Tell the whole story of what and why. Because as it stands I have no idea what your talking about.

Similar Messages

How can I avoid the need for Administrator rights for open registry key.vi

Dear wire workers.
I would like to do an EXCEL export.
Therefore I like to check if EXCEL is installed or not.
I use 'open registry key.vi' and read out the Excel\InstallRoot.
If there is an installed EXCEL than I export the data using ActiveX.
Everything works like a charm with LV 8.5.
The problem I have is that 'open registry key.vi' useses RegOpenKeyExA from the Advapi32.dll.
RegOpenKeyEx does, in fact, create a non-existing key and returns 0 (ERROR_SUCCESS?).
LONG lRegResult = RegOpenKeyEx(HKEY_CLASSES_ROOT, m_RegSubKey, 0, KEY_QUERY_VALUE + KEY_WRITE, &hkRegistry);
Successfully opens or creates m_RegSubKey under HKEY_CLASSES_ROOT.
Is there a way aroun this call?
In fact you need administrator rights to do this call because of the try to write a non exsisting key.
In my case this avoids the EXCEL export and any kind of registry access from LabVIEW without administrator rights.
:-) Who the hell has done this ;-)
All ideas are welcome
With kind regards
Martin Kunze
KDI Digital Instrumentation.com
e-mail: [email protected]
Tel: +49 (0)441 9490852

Hi Martin
Did you try to wire a "KEY_READ" constant to the security access mask input of the open registry key VI? I had a similar problem, if you just need to read a key or check if it's present use read access only, that should work.
Hope this helps,
Daniel

T61p Battery Problem - how can i get the warranty for my baterry?

- My brother bought a lenovo t61p in US and it is a my present but i live in Vietnam.
( Order date and time: 2CQTTE 04/30/08 19:15:30
Customer Number: 4290001
Order Number: 2CQTTE
Ship-To:
KIEN TRAN
321 74TH WAY N. )
- I have a problem with lenovo t61p baterry now, i just can use t61p in baterry mode < 1 hour.
( manufacture name: SONY
manufacture date: 2008-04-15
first used date: 2008-05
serial number: 4125
bar-Code number: 1ZET184F40X
fru-part number: 42T4566
cycle count: 47
- It is still under warranty. But can i get the warranty for battery in Vietnam? because Lenovo have a branch in Vietnam (http://www.lenovo.com/vn/en/) and the warranty center in Vietnam is in FPT company (big vietnamese company).
- Please show me how can i get the warranty for baterry in Vietnam?
Thanks
Message Edited by dracubi on 03-01-2009 01:18 PM

Well I assume that if the laptop is under warranty you should be able to get service for it. You can check the warranty status at http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=LOOK-WARNTY#sw That should tell you what the terms of your warranty are. If it is an international warranty you can get service at your local lenovo distributor. My t61 for example has a 3 year warranty that is valid in Turkey,. But also I have 1 year international, 2 years pan-Europeand and 3 year Turkish warranty. That was one ofthe stipulations in the contract when our thinkpads were purchased....

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

Go to the bottom of the page, click the flag, then select your country.

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

How can we do the validation for non visible records in table control.

Hi Experts,
I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
How can we do the validation for non visible records in table control.
Regards,
Bujji

Hi,
try validating material before displaying it in table control...'
Rgds/Abhhi

Subscription Acrobat Pro DC, Adobe Export PDF, Adobe PDF Pack. How can I activate the need of licens?

Subscription Acrobat Pro DC, Adobe Export PDF, Adobe PDF Pack.
How can I activate the need of licens?
The reason can be Adobe policy, I have change computer, added products, stop using any product and so on.

Hans,
When you no longer need the Adobe software on a computer or you wish to move it to another one, you should deactivate the software.
See this link: how to deactivate software. Installation rules will let you install the software on two computers of the same platform (both windows or both mac) but you are limited to running it on only one at a time. If you have only installed it once, you should be able to install it on the other computer. If you have already installed the software twice and you don't have access to your previous computer or you upgraded your computer's hardware, replace a hard drive, upgraded your operating system, or reformatted your drive before deactivating your software, you can ask Adobe Support to help you deactivate the software from the machine. Just have your serial number or Adobe ID ready, and then contact support. Then you can install the software from the links below and enter your serial number to re-activate the software.
If you need to find your serial number, sign in to your Adobe account. On the Manage Accounts page that appears, all of your registered products and their serial numbers are listed in the Plans & Products section. For more information on locating serial numbers, or on registering a serial number, please see Find a serial number.
Pattie
Download software here:
Downloads
Acrobat: XI, X | 9,8 | 9 standard
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard
Downloads for older versions
Creative Suite CS5.5 | CS5 | CS4 | CS3
Acrobat X | 9, 8
Photoshop Elements 11, 10 | 9, 8 , 7

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

scottypet
For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
on the properties of the first drag to the Timeline.
To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
Then you import your source media, using the appropriate Add Media choice.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
Please let me know if you have any further questions on this or need clarification.
Thank you.
ATR

How Can I change the Authentication for this Dynpage

Hello ,
I have created a rss feed in special Dnypage.   When I try to connect with rss reader to dynpage it occurs an error 500. The problem is that no logon screen appears and the portal would start the Dynpage with the User Guest.
How Can I change the Authentication for this Dynpage ? I need a LogonScreen
RSS URL:
/irj/servlet/prt/portal/prtmode/rss/prtroot/com.geberit.ep.uwlquick.uwlquickstarter?mode=rss

Hi ,
sry the entry in xml does not help. No Logon Prompt
<?xml version="1.0" encoding="UTF-8"?>
<application>
<application-config>
    <property name="SecurityArea" value="NetWeaver.Portal"/>
    <property name="Vendor" value="xx.com"/>
    <property name="PrivateSharingReference" value="com.sap.portal.htmlb,com.sap.portal.pcd.glservice,com.sap.portal.ivs.iviewservice,usermanagement,,com.sap.netweaver.bc.uwl"/>
</application-config>
<components>
    <component name="uwlquickstarter">
      <component-config>
          <property name="SafetyLevel" value="no_safety"/>
        <property name="ClassName" value="com.xx.portal.uwl.uwlquickstarter"/>
      </component-config>
          <component-profile>
               <property name="AuthScheme" value="default"/>
          </component-profile>
    </component>
</components>
<services/>
</application>

How can I change the language for the Quiz Results page?

How can I change the language for the Quiz Results (labels on buttons and text labels)? Is this possible only manually each time, or are general settings possible?

For Quiz Slides you've already added to your project file you will need to change the labels manually. If you change your Quiz Settings and Master Slides that control the defaults and then add new Quiz Slides, THEN those slides will carry your new settings.

How can I change the location for the backup from iphone to itunes?

How can I change the location for the backup from iphone to itunes? I want to backup to my external harddisk and not the computer itself. How do I do it?

Moving the iOS device backup location
Open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up, or with Start > Run on older Windows.
To move the current backup folder from C: to D: (for example) type in this command and press <Enter>
Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
Where <User> is your Windows user name.
To make iTunes look for the data in the new location type in this command and press <Enter>
MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
If your preferred drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
If you have Windows XP then you'll need a third-party tool such as Junction to link the two locations together instead of the MkLink command. The source folder is C:\Documents and Settings\<User>\Application Data\Apple Computer\MobileSync\Backup
tt2

How can I avoid the need to OFTEN refresh or recover HP 2000 notebook?

How can I avoid the need to OFTEN refresh or recover HP 2000 notebook? Windows 8.0.

I found your support page by searching E0M18UA#ABA (as opposed to EOM18UA#ABA) which I assume was a simple typo. To answer your original question, the answer is to identify and isolate the cause of the errors and issues you are experiencing. Once you identify each issue, you can find what it takes to get beyond them without having to refresh or recover so frequently.
You can only troubleshoot and identify the issues that are currently happening. If you are getting freezing right now, first take a look at this document specific to the freezing to narrow down the cause: Computer Locks Up or Freezes (Windows 8)
A link to this document is contained in the previous one, but it is worth pointing out that this might be valuable to test for hardware failures: Testing for Hardware Failures (Windows 8)
Another valuable tool when trying to identify the source of the problems, is to perform a clean boot after having one of the issues and trying to recreate it. This shows how to remove startup items. A good strategy is to disable half of the available items first, then restart and try to recreate the issue. If you cannot recreate it then perhaps there is a problematic startup item. If you can recreate it then disable half more, and repeat a few times until you empty the startup items.: How to perform a clean boot in Windows
I hope this helps, and by no means is this a recipe to fix your current issues, but a few strategies to help you better identify the issues.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How can I designate the disk for the iPhoto library?

how can I designate the disk for the iPhoto library?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

How can I get the invoice for the suscription

How can i get the invoice for the PDF exporter suscription, I need it, thank you

Hi Aurelie,
Firstly, you might need to sign in at "adobe.com" using your Adobe ID credentials.
After you are signed in, click on your name in the navigation bar and then click 'Manage Account'.
Under 'Plan & Products section', choose 'Manage Plan'.
All your plan details, payments, billing history are listed on this page.
To print the invoice, click on 'Print' button next to the invoice. A PDF copy of the invoice will be displayed in the next tab and this is it.
Now check and let me know if you need further assistance.
Regards,
Anubha

How can I bypass the requests for my password?

I'm on a Mac Pro 8 Core, running System 10.7.5. My dealer originally set it up (years ago) so that I simply had to hit the "return" key every time I was asked for a password and this worked fine. Then, when my Mac Mail went wrong and I went through Tech Support, they made me create a password for the Mail account.
I'm now afraid that, if I do anything to the password situation, it will mess up my Mail account once mkore.
Any advice?
Many thanks,
Harry

Hi Kappy,
Thank you very much for your reply.
I have indeed written down my Apple ID and, thanks to you, now understand that this is a completely separate item to my computer password, which I guess is really knows as an admin account password as you point out.
However, my question remains: how can I remove the need to enter my password when I start up my computer, or, alternatively, change it to (say) hitting the "return" key.
When I first bought this computer, my dealer set it up so that the password was the key "return" and also I did not have to "log in" when the computer started up.
Could you possibly find a moment to answer those questions? I'd be most grateful.
Best,
and thanks for your first response. Greatly appreciated.

How can I arrange the need for 2 (successive) commands before a message is actually sent?

Similar Messages

Maybe you are looking for