How can I automatically have the XRAID turn on and off at a specific time?

Hi Everyone,
I was wondering if anyone can help me figure out how to turn on and off the XRAID at a specific time. My electrical bills are crazy. Is there a way to get this done?
Thanks,
Jorge

Hi Everyone,
I was wondering if anyone can help me figure out how
to turn on and off the XRAID at a specific time. My
electrical bills are crazy. Is there a way to get
this done?
Thanks,
Jorge
I think turning the RAID on and off periodically is a bad idea. But if you really really really want to do this ....
Connect the xserve raid to a 'metered power strip such as those provide by APC. you can telnet to the power strip via the network to power off individual port)
write a script (run on the xserve or powermac that the RAID is connected to (direct or via switch)
0) quit application (issue a quit command or if the application have a stop command (example databse can be stopped)
1) unmount volume (must)
2) issue a telnet command via expect script to control the power strip to power off the array.
If you have java cli access to the array (see alienraid.org).(I have not tried this before.)
http://alienraid.org/article.php?story=xserveraidtools12&query=command
You can issue a command to execute the RAID admin shutdown command.
Put the master script into a unix cron job.
macbook pro Mac OS X (10.4.7) typing this on a white box pc

Similar Messages

How can I automatically have a new tab always be a copy of the current active tab?

The add-on extension "NewTabURL" (by "sogame") provided the option I want and used for a number of years. But it stopped working when Firefox was updated to version 16.0. When I click for a new tab, all I get is a completely blank tab. How can I automatically have the new tab always be a copy of the current active tab?
Can the extension "NewTabURL" be revised to work in version 16 and/or version 17? If not, how else can I get the new tab functionality that I desire? I can't seem to find any other extension that provides that functionality.
Milt Beychok

My trackball has 4 buttons and a scroll wheel. Each of the 4 buttons is programmable. The 4 buttons are normally pre-programmed for single-click, double-click, drag and right-click by simply pressing on them
Each of the 4 buttons may be programmed to also have other functions. For example, I programmed "control/single-click" to produce a middle click. I could also have used "shift/single-click" or "alt/single-click" to produce the middle-click. Or I could have similarly programmed double-click or drag or right-click. The Kensington Expert Mouse is quite versatile ... once you get the hang of programming it.
I have had it for about 4 years and I had never had the need to program one of them until you told me about using a middle-click.
Milt Beychok

How can I automatically create the files with serie-name?

Hello, Everyone,
I have a question again.
How can I automatically create the file with a serie-filename?
e.g. I have a program, it will repeat 5 times, and every time it will create a bmp-file, and I want to let this program automatically save these 5 files with a Serie-filename like File001.bmp, File002.bmp, .... File005.bmp.
How can I do it?`
Thanks a lot.
Regarts,
Johnny

Hi Deepu,
one more comment
The format code should be "%04d" to get leading zeros and have filenames with same length...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can I automatically email the completed form as a pdf for signing to the respondent?

how can I automatically email the completed form as a pdf for signing to the respondent?

Have your husband text the word "stop" to 48369. This should take his number out of the iMessage system.
Go into your settings under messaging and make sure the box to send as an SMS if iMessage is unavailable is checked.
Hopefully this will get your messages sending/receiving to each other.

I have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

i have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

Hi,
Have a Look at these Links on Home Sharing:
http://support.apple.com/kb/HT4620
http://support.apple.com/kb/HT3819
Could be what you need...
Cheers,

How can I stop my daughter from turning location services off from find iPhone?

how can I stop my daughter from turning location services off from find iPhone?

Settings > General > Restrictions
Turn them on, go down and tap Location Services and restrict the ability to turn it off.
Or tell her if she turns it off again you will take the phone away and get her simple flip phone.

TS3899 Can two people have the same email address and password on their phone?

Can two people have the same email address and password on their phone?

I guess so. But the email content will mirror on both phones.
If you are talking about your Apple ID and iCloud email, yes, it is possible, but again the phones will mirror. You should not have the same Apple ID and iCloud both.
Why?
If you explain the reason for the question we may have a solution that works for you.

How can I get rejected photos out of LR5 and off the HD?

When I try to deleted rejected photos in LR5 on my iMac, I get a dialog saying they can't be sent to the trash. How can I get unwanted photos out of LR5 and off the hard drive?

Instead of hitting just the delete key, you need to hit ⌘+Del and one of the choices will be to remove from hard drive.

How can I stop my screen from going on and off when I play games ?

HOw can I stop my screen from going on and off all the time when I touch it.

Maybe it is a hardware problem, but you will not know that unless you start eliminating all possible software issues. Try this. Close all apps in the recents tray and reboot your iPad.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How can you automatically start the next Podcast?

When an audiobook finishes, the next audiobook automatically. How can I get podcasts to do the same? I listen on bike rides and it is difficult to have to switch to the next podcast.
Windows XP

Hi
Welcome to Apple discussions.
2 options (neither of which are particularly great)
First - drag the relevant podcasts into a playlist in iTunes, sync your iPod and then off you go!
Second - Create an on the go playlist of the relveant episodes on your iPod.
I think the thinking behind this is that Apple assume people only have one podcast at a time to listen to i.e. one a day/ week etc. You are right though, it would be nice just to have a preference to set to do what you want.
You should leave your feedback here:
http://www.apple.com/feedback/ipod.html

How can multiple computers have the same library?

My family has one iTunes account, but our iTunes library is different on every computer. Our iPods are each synced with a different computer. How can we have one library with all of our purchases together? We use the same account, so it doesn't make sense that the music purchased on my laptop won't show up on our home desktop. Each of our iPods are synced to a different computer.

No.
Iphone will sync with one and only one computer a a time. Syncing to another will erase the current content from the iphone and replace with content from the new computer.

How can I automatically notify the invitees by email about an event on the calendar on a certain date ?

Hello,
I want to start an event in the calendar, on this very day, for after 2 weeks (just giving an example).
Also I want to add an notification, that is going to notify me and all the invitees, for example 10 before the very event.
How can I do that?
I tried to do it, but it only reminds me, not the invitees.
Thanks in advance!
Have a wonderful day!

I don't enter it , it gets it from my card and i have written 2 there and its allowing me to choose between those two.
Maybe we are talking about different things if you can just let me know the procedure of doing it from the beginning, I will be very grateful, if not thanks!

How can I automatically control the channel selection on the data logger

I am an in-experienced use with a simple system which measures and displays temperature from 16 thermocouples. Not all 16 thermocouples are always connected at once and those that aren't are blanked off from view. I would also like to use the Advanced Data Logger VI to log the measurements but would like to have the logger only record or display the thermocouples that are connected. Un-connected channels give a signal of 1264 degrees so I can use a comparator to give a boolean output to switch them off. Can anyone please tell me how to do this.
Also, I need to expand the VI to read all 16 channels instead of the current 8. Any help would be appreciated

Mike,
Unfortunately I couldn't get the reference of the example you mention, probably you may want to add it as an attachment so the person who decides to answer this question knows exactly which example you are describing. So for the part of making visible/invisible some of the channels I attached an example that I built for demonstrating this feature, simply open the VI and run it, if you want one of the channels or plots from the graph to be invisible just click in the push button that corresponds to it. Switch to the block diagram and review the use of property nodes, using the property of visible.
If you want to generate a support request please visit www.ni.com/ask to see the options of reaching us.
Good luck!
Nestor Sanchez
Applications Engine
er
National Instruments
Nestor
National Instruments
Attachments:
Visible_Plots.vi ‏46 KB

How can I automatically align the bottoms of two-page spreads in a long novel in CS3?

I'm laying out a long novel in InDesign CS3. I've set the text to align to the baseline grid and have the keep options set to prevent widows and orphans. Because of these keep settings, often one page is a line shorter than the one facing it. Is there some way to set things up so that the longer page in a 2-page spread automatically breaks a line sooner, so as to match the shorter facing page -- or do I have to introduce page breaks manually, spread by spread?

If you're the author, you might want to consider rewriting the annoying paragraphs. Perhaps changing a contraction to full words, or replacing full words with a contraction, for example. Yes, it's hard not to change meaning, so it's your call. If you have a good relationship with the author, you could consider suggesting the same thing.
Other possibiliies that may not be acceptable options in your situation include experimenting with applying the single-line paragraph composer instead of the default multi-line composer, adjusting type and leading heights, and/or text frame size, uniformly all across the book, to see if a tiny tweak resolves all or most of the annoyances.
The Auto-Size text frame feature just introduced in InDesign CS6 might work by setting it to a maximum and minimum height that differ by one line, "grow down from the bottom."
Here's the dialog box:
Search Google for terms like "InDesign CS6 auto-size text frame feature" without quotes for more info.
[EDIT] Ooops, I just learned from Anne-Marie Conception's excellent free sample Lynda.com video tutorial that came up in the Google search I suggested above, that Auto-Size can't set a maximum frame height. So it might be tricky or impossible to find the right combination of keep lines together and other settings for your purpose of compensating for only one line of difference.[/EDIT]
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
JWKewet wrote:
I'm laying out a long novel in InDesign CS3. I've set the text to align to the baseline grid and have the keep options set to prevent widows and orphans. Because of these keep settings, often one page is a line shorter than the one facing it. Is there some way to set things up so that the longer page in a 2-page spread automatically breaks a line sooner, so as to match the shorter facing page -- or do I have to introduce page breaks manually, spread by spread?
Message was edited by: peter at knowhowpro

How can I automatically have my iWeb photo albums updated?

Thanks in advance...
I have several iPhoto albums that I've published on my iWeb site. However, I can't seem to figure out if it is possible to have the albums on the iWeb site be automatically updated when I add or delete photos from the corresponding iPhoto album?
Is this possible to do?
Dick

Going along with what Alancito suggested you can then embed an iPhoto MMe gallery into a Web page as shown in this demo page:MobileMe Galleries and Quicktime Movies. I've linked to the mosaic mode of the gallery but you can use any of the modes you'd like.
Then any changes in iPhoto to the gallery will be reflected automatically in your iWeb page. This method also lets you isolate the gallery from the your other MMe galleries if you'd like.
OT
Message was edited by: Old Toad

How can I automatically have the XRAID turn on and off at a specific time?

Similar Messages

Maybe you are looking for