How can I calculate the sum of the text fields?

I'm trying to use a Flash form that has 40 text fields where
the user will enter numeric values. I want to add one field that
will show the total of all those values as the user enters them in.
I have tried the following, but as soon as I add Val(Trim(...))
around the current amount to make it numeric, it doesn't update as
I type anymore. If I take that out, I get an error that it can't be
converted to a numeric value. Any suggestions?
Thanks,

If you want to do your calculations as the data is being
entered, you'll have to write some actionscript to do it on the
client. cfcode runs on the server.

Similar Messages

How can I limit numeric codes in a text field?

How can I limit numeric codes in a text field? For example I want to list Industry SIC codes and I want to block someone from inputting an exlcuded industry code.

We don't offer that type of input restriction for a text field.
Can you create a list of all allowed codes and use a Drop Down menu or Single/multiple Choice field?
Thanks,
Josh

How can I merge 3 or more individual text fields into an editable summary text field?

I am stuck and do not know where to begin. I am self taught in using Adobe LiveCycle and have found many answers here in the forums and via trial and error.
I cannot find or create the correct java script or form calc to feed multiple text fields into one text field. My supervisor is asking me to do this for two sections of a form I created using Adobe LiveCycle Designer ES 8.2.
1) Merge all 3 user entered text fields to an user editable summary text field at the end of the form.
2) Merge all 24 user entered text fields to an user editable summary text field at the end of the form.
Since they are all individual text fields in response to various questions, I cannot use the global binding function. I do not want the summary text field to override the individual text fields.
Here is the java scripting I placed on Show: calculate* Language: javascript Run: at client
1) PDStrengthWeaknessComments.rawValue + "_" + OCStrengthWeaknessComments.rawValue + "_" + CEBAStrengthWeaknessComments.rawValue;
Needless to say, these instructions are not working on my form. Would someone with a lot of experience or an IT degree kindly help me?

I just tried adding the front end as you suggested and confirmed that the Object > Value is set to "calculated - user can override" for the summary text field.
OverallAnalysisAppFeedback.rawValue = PDStrengthWeaknessComments.rawValue + "_" + OCStrengthWeaknessComments.rawValue + "_" + CEBAStrengthWeaknessComments.rawValue;
I was still unsuccessful.
I opened the debugger and received the following information. I do not understand what AdobeLiveCycle is asking me to define.
PDStrengthWeaknessComments is not defined
1:XFA:GARP2011NewRecompeteSRW[0]:Page20-OverallAnalysisAppFeedback[0]:AllOverallAnalysis[0 ]:calculate
PDStrengthWeaknessComments is not defined
1:XFA:GARP2011NewRecompeteSRW[0]:Page20-OverallAnalysisAppFeedback[0]:AllOverallAnalysis[0 ]:calculate
Budget1Comments is not defined
1:XFA:GARP2011NewRecompeteSRW[0]:Page21-OverallAnalysisAppFeedback-Budget[0]:AlBudgetQs[0] :calculate
Budget1Comments is not defined
1:XFA:GARP2011NewRecompeteSRW[0]:Page21-OverallAnalysisAppFeedback-Budget[0]:AlBudgetQs[0] :calculate
Do you have any additional tips or suggestions?

How can I validate numeric values in a text field?

Hi
Once more I have a problem.
I have a field in which the user should enter 10 digits in the pattern 999999-9999. The field must only contain numeric data and must be exactly 10 characters. I have a validation script on the print button, that prevent printing if required fields are empty or not properly filled out.
I have tried two ways to work this out, and I'm not satisfied with any of them, as I can still print despite of validation scripts and warning messages.
1.
I set the field to numeric, limited to 11 characters.
Display pattern num{999999-9999}, edit pattern num{999999-9999} and validation pattern num{999999-9999}
Problems using this solution: When I type 11 digits in the field (ex.12345612345) I get a warning message and 12.345.612.
But when I type 9 digts (ex. 123456-123 or 123456123) I get no warning message and 000000-0000 or 012345-6123
If I type alphabetical characters (ex. 123456-abcd) I get no warning message and 000000-0000.
2.
I set the field to text field, limited to 11 characters.
Display pattern text{999999-9999}, edit pattern text{999999-9999} and validation pattern text{999999-9999}
Now when I type 11 digits in the field (ex.12345612345) I get no warning message and 12345612345.
When I type 9 digts (ex. 123456-123) I get no warning message and 123456-123
When I type 9 digts (ex. 123456123) I get a warning message and 123456123
If I type alphabetical characters (ex. 123456-abcd) I get a warning message and 123456-abcd.
It works slightly better as a text field, but I am not satisfied at all.
Has anyone a solution to this?
Additional I would also like the hyphen to emerge automatically when typing.
K

I just want to summarize my experience.
I found a related discussion here: http://forums.adobe.com/message/2513720#2513720.
Putting the pieces together I came up with this solution.
form1.subform.TextField1::exit - (JavaScript, client)
var
myRegex = /\d{6}\-\d{4}/;
var
singleDigits = [0,1,2,3,4,5,6,7,8,9]; // array for single digit check
if
(this.rawValue != null || this.rawValue != ''){ // only if the field has a value...
     if (!this.rawValue.match(myRegex)){ // and it doesnt match the pattern (i.e. 2 digits)
     this.rawValue
= ''; // clear the field
     xfa.host.setFocus(
this); // set focus back to the field
     xfa.host.messageBox('Error: Pattern Conflict. Please use the pattern 999999-9999.');
// enter any message you wish here
Kirstine

How can I pass URL parameter value to text field?

Dear Masters,
I have a text field. I want it to have a value based on the URL parameter, for example:
http://myapplication.net:7777/pls/apex/f?p=102:1:::::P1_RTNUM:9448,P1_EMAILADD:email.add.here
I want the value of the text field = P1_EMAILADD after the form was loaded. Also, please have it read-only.
Thanks a lot.
Edited by: user6368519 on Sep 16, 2009 11:39 PM

Thanks Saad,
Can I email you(I would need your email) for any concerns or just create a new thread for you to look?
This is ok now. I'm sorry but I just marked this one as an "answered" one last time.
Thanks for all the help again I appreciate it. ;)
Thanks,
Aaron
[email protected]

How can I change background color for a text field

Hi I tried this
style="BACKGROUND-COLOR:#00FFFF"
working fine in IE
but not working in Netscape.. any other way to set the background color?

Netscape 4.x does not support this feature. Only Netscape 6.x does.

How can I calculate the value of the cell, which depends on other rows?

Hi, all!
I have an application with table. In this table i have calculate some fields, that doesn't exists in data class and depends on other row values, e.g. current row number, or sum of previous rows. How can i calculate this values in TableView?
The problem is that I have no information about the current row number in the cell value factory.
Example:
public class Transaction {
public String getName();
public BigInteger getAmount();
} // There is no getter for "Balance"
Result table should be something like this:
Name
Amount
Balance
transaction1
300
300
transaction2
200
500
transaction3
500
1000
Also, after sorting by "Amount", "Balance" should be recalculated:
Name
Amount
Balance
transaction3
500
500
transaction1
300
800
transaction2
200
1000

Strings can be converted to numbers by various parse methods. For instance Strings can be converted to double via Double.parseDouble(myString).
That being said, it appears that your textfield will contain numbers and operators, and so these operators will need to be parsed too. I would advise you to search on the terms Java infix postfix.

How can i calculate the average in java

how can i calculate the avergae mark out of two marks for instance in like exam mark out
of two other ones
thanks for considering this message

Average or Mean:
sum_of_N/N
Here N is the number of marks.
sum_of_N is the total sum of n(all marks added together)
public int average(int[] marks) {
int sum;
sum = 0;
for(int i=0;i < marks.length;i++) {
sum=marks[i]+sum; // keep adding to the total
return average = sum/marks.length;
// warning- using an int here can be a pitfall(we could have a decimal outcome).
}

How can i calculate the percentile rank?

How can I calculate where in percentile terms a single value falls within a array of many values?
In excel it is:
5
10
12
11
26
18
14
11
16
19
=PERCENTRANK(A1:A10,10) = 0.111
Thanks!

Average or Mean:
sum_of_N/N
Here N is the number of marks.
sum_of_N is the total sum of n(all marks added together)
public int average(int[] marks) {
int sum;
sum = 0;
for(int i=0;i < marks.length;i++) {
sum=marks[i]+sum; // keep adding to the total
return average = sum/marks.length;
// warning- using an int here can be a pitfall(we could have a decimal outcome).
}

Text on path: How can I calculate the text length?

Hi
I have a text on path (spline item). Now I need the length of this text and the length of the spline item.
I try to calculate the text length using IWaxLine::GetWidth(), but this is always 0.
- How can I calculate the length of this text?
- How can I calculate the length of the spline item?
Thanks
Hans

It would be interesting if you could describe the purpose of your "length", but I don't have an answer anyway. Would the bounding box be sufficient?
Considering that TOP may be combined with arbitrary spline paths, this could become an exercise in higher math. I haven't yet encountered a function that returns the mathematical length of such a spline.
Otherwise it could be solved if you iterate and sum up the relevant points of the bounding box (ascender, descender, baseline?) of individual glyphs.
Be warned that the whole TOP looks alien, as if it were a transplant from a different program. Experience also shows that documented and actually used interfaces / commands are completely different animals ...
Dirk

How can we calculate no.of leave used by the employee except sunday.

Dear Friends,
i have query how can we calculate no.of leave taken by the employee except sunday & government holiday.
Example: A person take a sick leave From 13/02/2008 to 20/02/2008 with in that period 17th was sunday.
when we calculate absence day for that person,Total value is 8 days but exact output is 7days only.How can i get exact result,any function module is avilable for this issue .
Thanks & Regards,
Rajkumar.A

Hi,
you have to consider SL leave as in holiday's So you can check with clinet if client says consider you can otherwise you con't
its depend client requirement
and you can go to controlls inSAP and change absence controlls for SL with holidays
Regards
Suresh

How can I calculate which is the index (x-value) correspondant to a certain value of a signal?

I just want to calculate the quality of the peak in a FFT, defined as you can see in the attached file.
For that, I would need to know how can I calculate in Labview the index or indices (x-value) correspondant to a certain amplitude value of the function.
Kind regards, and thank you for reading,
Jose
Solved!
Go to Solution.
Attachments:
quality.jpg ‏6 KB

If you know the lineshape (e.g. Lorentzian), you can use nonlinear fit. This will give you the most accurate value.
In the most simple case (insignificant offset and noise, no other peaks) you can apply the following code (if there are other peaks, then take a apropriate array subset before applying the code). To get correct units, just scale with df.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
WidthAtHalfHeight.png ‏52 KB

How can I calculate the request time ?

Hello,
How can I calculate the total consume time in each request ?
For example, I want to start calculating the time when I click on a Link or a button and the end time when it completed load the page !
Eric

You could use a filter like this one:
import java.io.*;
import java.net.*;
import java.util.*;
import java.text.*;
import javax.servlet.*;
import javax.servlet.http.*;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.ServletContext;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
public class TimeFilter implements Filter {
    // The filter configuration object we are associated with. If
    // this value is null, this filter instance is not currently
    // configured.
    private FilterConfig filterConfig = null;
    private static final boolean debug = false;
    private long start = 0;
    private long end = 0;
    public TimeFilter() {
    private void doBeforeProcessing(ServletRequest request, ServletResponse response)
    throws IOException, ServletException {
        if (debug) log("CalendarFilter:DoBeforeProcessing");
        System.out.print("In Filter ");
        this.start = System.currentTimeMillis();
        System.out.println((new java.util.Date()).toString() +
                           " start request ");
    private void doAfterProcessing(ServletRequest request, ServletResponse response)
    throws IOException, ServletException {
        if (debug) log("TimeFilter:DoAfterProcessing");
        System.out.println("Completion Time = " + (System.currentTimeMillis() - start));
     * @param request The servlet request we are processing
     * @param result The servlet response we are creating
     * @param chain The filter chain we are processing
     * @exception IOException if an input/output error occurs
     * @exception ServletException if a servlet error occurs
    public void doFilter(ServletRequest request, ServletResponse response,
    FilterChain chain)
    throws IOException, ServletException {
        if (debug) log("TimeFilter:doFilter()");
        doBeforeProcessing(request, response);
        Throwable problem = null;
        try {
            chain.doFilter(request, response);
        catch(Throwable t) {
            problem = t;
            t.printStackTrace();
        doAfterProcessing(request, response);
        // If there was a problem, we want to rethrow it if it is
        // a known type, otherwise log it.
        if (problem != null) {
            if (problem instanceof ServletException) throw (ServletException)problem;
            if (problem instanceof IOException) throw (IOException)problem;
            sendProcessingError(problem, response);
     * Return the filter configuration object for this filter.
    public FilterConfig getFilterConfig() {
        return (this.filterConfig);
     * Set the filter configuration object for this filter.
     * @param filterConfig The filter configuration object
    public void setFilterConfig(FilterConfig filterConfig) {
        this.filterConfig = filterConfig;
     * Destroy method for this filter
    public void destroy() {
     * Init method for this filter
    public void init(FilterConfig filterConfig) {
        this.filterConfig = filterConfig;
        if (filterConfig != null) {
            if (debug) {
                log("TimeFilter:Initializing filter");
     * Return a String representation of this object.
    public String toString() {
        if (filterConfig == null) return ("TimeFilter()");
        StringBuffer sb = new StringBuffer("TimeFilter(");
        sb.append(filterConfig);
        sb.append(")");
        return (sb.toString());
    private void sendProcessingError(Throwable t, ServletResponse response) {
        String stackTrace = getStackTrace(t);
        if(stackTrace != null && !stackTrace.equals("")) {
            try {
                response.setContentType("text/html");
                PrintStream ps = new PrintStream(response.getOutputStream());
                PrintWriter pw = new PrintWriter(ps);
                pw.print("<html>\n<head>\n</head>\n<body>\n"); //NOI18N
                // PENDING! Localize this for next official release
                pw.print("<h1>The resource did not process correctly</h1>\n<pre>\n");
                pw.print(stackTrace);
                pw.print("</pre></body>\n</html>"); //NOI18N
                pw.close();
                ps.close();
                response.getOutputStream().close();;
            catch(Exception ex){ }
        else {
            try {
                PrintStream ps = new PrintStream(response.getOutputStream());
                t.printStackTrace(ps);
                ps.close();
                response.getOutputStream().close();;
            catch(Exception ex){ }
    public static String getStackTrace(Throwable t) {
        String stackTrace = null;
        try {
            StringWriter sw = new StringWriter();
            PrintWriter pw = new PrintWriter(sw);
            t.printStackTrace(pw);
            pw.close();
            sw.close();
            stackTrace = sw.getBuffer().toString();
        catch(Exception ex) {}
        return stackTrace;
    public void log(String msg) {
        filterConfig.getServletContext().log(msg);
}and in the web.xml :
   <filter>
        <filter-name>TimeFilter</filter-name>
        <filter-class>
            com.filter.TimeFilter
        </filter>
    <filter-mapping>
        <filter-name>TimeFilter</filter-name>
        <url-pattern>/services/*</url-pattern>
    </filter-mapping >

How can I calculate the waveform integral in a defined time interval?

Hi:
I need your help. How can I calculate the waveform integral in a defined time interval? For example: from "0" to "2pi"?!
Thanks.

Hello Clecio,
You might want to try the Integral x(t) VI. The documentation for this VI notes:
Performs the discrete integration of the sampled signal X. Integral x(t) calculates a definite integral. The value of the output array at any value x is the area under the curve of the input array between 0 and x.
You would pass the samples of the waveform that fall between your particular window, then pass 1/number of samples for the d(t) parameter.
Hope that helps.
Wendy L
LabWindows/CVI Developer Newsletter - ni.com/cvinews

How can I calculate the total time in java?

Hello!
I need to calculate the total time!
For example I have start time:
          Format formatter1;
          Date date1 = new Date();
          formatter1 = new SimpleDateFormat("hh:mm:ss");
          String startTime = formatter1.format(date1);
          //startTime = "14:20:40";
And I have finish time:
          Format formatter2;
          Date date2 = new Date();
          formatter2 = new SimpleDateFormat("hh:mm:ss");
          String finishTime = formatter2.format(date2);
          //finishTime = "08:30:55";
So, after manually calculating, I get total time: "18:10:15"
How can I calculate the total time in java? (Using formatter1 and formatter2 I suppose)
What I need is to print "total 18:10:15"
Thanks!

800512 wrote:
I did the following but, I think something is wrong here:
I defined before: Date date1 = new Date(); Date date2 = new Date();
And it should be exactly 5 seconds between them.
I found delta between date1 and date2:
Format formatter = new SimpleDateFormat("HH:mm:ss");
          long timeInMilliFromStart = date1.getTime() - date2.getTime() ;
          Date date3 = new Date(timeInMilliFromStart);
          String timeInSecFromStart = formatter.format(date3);
and I get always
//timeInSecFromStart = 02:00:05
But it should be exactly 00:00:05.
What can be a problem?Because, like I said, a Date measure an instant in time, not a duration. So when you have 5000 ms, and you turn that into a Date, that means 5 sec. after the epoch, which works out to 1/1/1970 00:00:05.000 GMT.
As I mentioned, if you're not currently in GMT, then you have to set the TZ of the DateFormat to GMT. Right now, it's showing you the time in your TZ. If you included the date in your SimpleDateFormat, you'd see either 1/1/1970 or 12/31/1969, depending on which TZ you're in.
Bottom line: You're trying to use these classes in a way they're not meant for, and while you can get the results you want for a limited set of inputs if you understand what these classes do and how to work with that, it's a brittle approach and comes with all kinds of caveats.

How can 2 people use itunes in the same household? we both have iphone 4 and separate id but the same itunes? pleasehelp

how can two people use itunes in the same household? i had a iphone before so alreday had an itunes account now me and my husband have upgraded and we now both have them. he has set up a username and i have mine yet when he logs in he seems to just get my account? please help

Decide which iPhone will be keeping the current iCloud account. On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you are syncing Notes with iCloud, you'll also have to email your notes to yourself so they can be recreated in the new account as they cannot be migrated.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

How can I calculate the sum of the text fields?

Similar Messages

Maybe you are looking for