How can I check the age and the generation on an Apple tv?

Welcome to the Apple Community.
Models
1st generation
2nd generation
3rd generation
3rd generation Rev A
Release date(s)
January 9, 2007
September 1, 2010
March 7, 2012
January 28, 2013
Discontinued
September 1, 2010
March 7, 2012
March 10, 2013[69]
In production
Model Number - Model ID - Order Number
A1218 - AppleTV1,1 - MA711LL/A
A1378 - AppleTV2,1 - MC572LL/A
A1427 - AppleTV3,1 - MD199LL/A
A1469 - AppleTV3,2 - MD199LL/A

Similar Messages

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer ?

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer/ will be deleted on the server ?

For that kind of connectivity you need to be using an email account configured either as IMAP or Exchange.
IMAP & Exchange accounts will maintain a sync across all your devices, so if you read / delete a message on your phone, it will disappear from the server as well. This cannot happen in POP email accounts.
If your using gmail, instructions on how to set up exchange / imap are here http://www.google.com/support/mobile/bin/answer.py?answer=138740&topic=14252
Alternatively, if its anything other than Google, you will need to contact your email providor or IT department (if your email address resides with an enterprise environment) to get the correct settings.
Hope this helps!

How can I save my data and the date,the time into the same file when I run this VI at different times?

I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery

I ordered Illustrator for another user. I received an invitation that was accepted, logged in and tried to change the account to the name and email of the person it was ordered for. How can I get this changed and the invitation sent to the right person?

I ordered Illustrator via creative cloud for another user. I received an invitation that was accepted and tried to change the account to the name and email of the person it was ordered for. How can I get this changed and the invitation sent to the right person?

Cloud as a Gift https://forums.adobe.com/thread/1665610

How can i check that who end the session

Hi to all ,
my query is that how can i check that who end the session.
through SM04 user who have the authontication can end the session so how can i check that who end the session being a BASIS admin.
Thanks & Regards

It's wrotes in system log, check in sm21.
Regards.

BPC 10.0 NW - How can I check & ensure I am the BPC administrator?

Dear All,
I am a BPC developer and have recently assumed BPC admin responsbility.
I am told that I am having BPC admin rights. But, I can see ONLY ONE environment and it seems there are few more environments that exist in the BPC server.
My understanding is:
If I am the BPC admin, I will be having access to all the environments. Since this is not the case, how can I ensure that, as a BPC admin, I have all the necesary rights and hence the access to all the environments?
Thank you.
Regards,
Peri

Hello, the security in BPC is Environment based.
The original installation user has access to all environments.
Check if granting yourself SAP_ALL profile let's you access other environments or ask person with SAP_ALL access to add you to Admin team in other environments.

How can I restore my bookmarks, and the Firefox drop-down in the top left?

I cannot use Firefox as I always used to.
It has lost all of my Bookmarks Bar, so I cannot go to, for example, my email link.
It goes straight to a full screen display of my (Google) homepage and won't let me see the old Firefox drop-down in the top left corner.
How can I get any Firefox help?
I can just about survive using Internet Explorer - is that what Mozilla want?
oh, it's back now. what happened?

Hello,
you can easily move the Bookmark icon to left using the Customize feature from the Menu [[Image:New Fx menu]] button on the Right top corner.
please also see:
*Classic Theme Restorer. https://addons.mozilla.org/hu/firefox/addon/classicthemerestorer/
*https://support.mozilla.org/kb/learn-more-about-the-design-of-new-firefox
*https://support.mozilla.org/kb/how-to-make-new-firefox-look-like-old-firefox

How can i connect home sharing and the control app with 2 IP addresses?

i am using my macbook pro at school and i also take it back home, and when i'm home the home sharing with my iPhone 5's Remote app works perfectly fine, just that when i'm back to res at school it doesn't work for some unknown reason. i've checked everything including the firewall and stuff and itunes home sharing is turned on, i even tried using another home sharing apple id but it still doesn't work. somebody please help!!!
thanks!

If you use eithernet for your main connection then just plug the TC bridged into the network.
If you use wireless for your internet connection then you can use the TC isolated from the network by ethernet.. but this is really only convenient on a desktop Mac.
The instructions I put in this thread with screenshots.. see near the bottom.
https://discussions.apple.com/thread/4817218?tstart=30
It is a bit tricky so if you have questions ask back here.
Just to say a USB for firewire external drive is faster and more reliable than a TC.. cheaper to buy as well.. although since you already have the TC that is not a concern.. but you can ebay the TC and buy a bigger and better external drive with the proceeds.

There is a strange yahoo search in the tabs section. after downloading firefox 8.0.1. how can this be removed? and the defult start up page is yahoo instead of firefox

how can the yahoo extras be removed. is there a way to go back to the older firefox version?

''Yahoo Toolbar messes up Location Bar Search''
'''Remove the Yahoo Toolbar'''
# "Ctrl+Shift+A" (Add-ons Manager)
# Select Puzzle piece on left-side for Extensions List
# Find "Yahoo Toolbar" and click on "Uninstall" button, and restart Firefox. ''(if you really need to keep the Yahoo toolbar, you can hide the toolbar instead with customize, and still change all the search defaults as below)''
'''Then to fix the default search engine''' used at the Location Bar, change the value of '''keyword.URL''' in '''about:config''' to one of the values shown in [http://kb.mozillazine.org/Location_Bar_search#Location_Bar_search_.28external_-_search_engine.29 Location Bar search] at MozillaZine.
* Google Search (Google search results page)<br>'''http://www.google.com/search?ie=UTF-8&oe=UTF-8&q='''
# type in '''about:config''' into the location bar (in a new tab)
# if the warning message nonsense comes up ''uncheck'' the box '''before''' dismissing the dialog message
# '''filter on keyword'''
# right-click on '''keyword.URL''' and choose "modify" then paste in the Google search engine string of your choice.
# '''filter on defaulturl'''
# right-click on '''browser.search.defaulturl''' ''(if it exists)''and again choose "modify" then paste in the Google search engine string of your choice.
# '''filter on ytff'''
# right-click on '''yahoo.ytff.search.popup_src''' ''(if it exists)'' and again choose "modify" then paste in the Google search engine string of your choice, if adventurous might see if "reset" would remove and see if gone in next session (well not for those keeping the extension).
--used in https://support.mozilla.com/questions/850287
'''Avoiding the problems:''' Many software installations contain additional baggage known as crapware. The Yahoo Toolbar is packaged with Java [http://imageshack.us/photo/my-images/266/javainstall.png/ picture]
More information on ask.com, Yahoo Toolbars which involve extensions, not just changes to the home page.
* http://kb.mozillazine.org/Problematic_extensions
* Uninstalling toolbars - MozillaZine Knowledge Base<br>http://kb.mozillazine.org/Uninstalling_toolbars
'''More information on configuration variables''' available in
[http://kb.mozillazine.org/About:config_entries about:config entries] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config] (How to change).

How can I set my mac (and the screen) to not go on sleep mode ?

I just want my mac (and the screen) stay alive for a minimum of 8 to 10 hours, not going in sleep mode (or save screen). Just displaying a web page without doing anything else. In preference system, energy save is all set to «never», but after a while the screen goes to sleep ... ?

You probably have a corrupt .plist file. To fix:
1. Hold down the option key.
2. In the Go menu in the Finder, scroll down to Library
3. In Library, find Preferences
4. In Preferences, find com.apple.systempreferences.plist and drag it to the trash
5. restart
6. you will have to reenter your preferences.
Another option is caffeine: Lighthead - Caffeine

HT1752 how can I check for SpyBots and other invasion things on my computer

I am beginning to have odd things happen to my computer. Someone told me to check for SpyBots, but I don't know how. I participate on Blog Talk Radio, and was informed they use these spybot things. How do I find out if there are invasive things like this affecting my computer?
In the last 2 days I've had two windows pop up saying I needed to restart the computer. This has never happened before. Any help anyone?

Forget about the advise on the spybots. That person doesn't have the foggiest idea what is going on.
You are having kernel panics. The most likely casue for kernel panics is hardware problems usually RAM that has gone bad.
Go to http://thexlab.com/faqs/kernelpanics.html for a good procedure on how to find out what is causing the kernel panics.
Allan

How can I check for keylogger and other malicious software on a used Mac

I purchased a used iMAC (Late 2012 21.5") and it has OSX 10.9.4.
How can I ensure that it is clean and doesn't have any password or key logging or other malicious software installed in it ?
I basically want to ensure I have a clean iMac at the start and not have to worry about security.
Thanks

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

How can I check for viruses and malware on my MacBook Pro?

I have a MacBook Pro running OS X (10.7.5). I don't have any anti-virus or malware software installed. My yahoo email account was hacked last night, after I had added the account to Mail on my mac (which obviously involved typing in my email account password). I'm now worried that I might have a virus or malwre on my computer as I've had that email account for years with the same password (foolish I know) and never had a problem.
Is there a way to check if my mac has any viruses or malware? Which anti-virus/malware software should I install to protect my mac?
Thanks.

Ever hear of this? I was using Mozilla, and now I'm scared, so on Safari. Even so, I'm worried about doing online banking until I know what's up. Despite that, I did online banking on Safari today, and the pages wouldn't load, or weren't clickable. Also, I'm getting blank screens on Safari. It all started after this happened a number of days ago, so I want to do a scan…. but newish to the Apple world, so don't want to screw things up even more (potentially) - by installing some incompatible malware scanner. From the other day:
has anyone's Macbook Pro ever been hacked? I was using Mozilla, just opened a twitter acct, was trying to cross link with G+, and all of a sudden all this weird stuff was happening: url bars erasing on its own (and fast), pages jumping from window to window, 2 unread msgs in Gmail later marked as read. I shut down and restarted. I don't know if it's a key stroke I did or if I may've been hacked. worried.

How can I remove telephone lines and the like, on PS CC?

Hi,
I have done this already but for the life of me I just cant remember how I did it (it was just so easy!!!) and i cant find it in answers either.
Please how do you do it?
Thanks
Serge

Yes those can be used but with CC there is a neater way by simply clicking at the two extremities and pouf it goes away...
But I dont remember how to do it
Thanks
Serge

How can I swap my photos and the apps I have paid for, from my iphone 4s to iphone 5?

I am having trouble swapping my photos and videos along with my paid apps to my new phone
I dont have access to a computer and cant let my old phone go until I have all the pictures.
Also have a few apps i have paid for.
Please can someone advise me on this.
Thank you

Have you set up the new phone yet?
If you did you missed it.
On the iPhone 5:
Settings > General > Reset > Erase All Contents & Settings
When it finishes choose the restore from iCloud backup option

How can I check the age and the generation on an Apple tv?

Similar Messages

Maybe you are looking for