How can i configure number of decimal places in smartview for Word?
When I open a smart slice in word via smart view all my values are in scientific notation, I have set the options in excel but they don't come over to word. Isa there any way to correct this?
Have you tried formatting the fields in Word? For example, after bringing in your SmartSlice data, right-click on the field where your data resides and select "Toggle Field Codes" from the Windows menu. Modify the field to look something like this for comma delimited with two decimal places: {=HsGetValue("", "Period#Sep", "Account#Cash")|SmartView14103814190|$#,##0.00|||} Comma delimited with no decimal places: {= HsGetValue("", "Period#Sep", "Account#Cash")|SmartView14103814190|$#,##0|||}
Similar Messages
-
How to get the number of decimal places configured for a site column
Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijitGet the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat; -
How to set the number of decimal places.
Just wondering what and where the code would be to set the number of decimal places when calculating an answer.
Depending on exactly what result you want you could alternatively format the result to a set number of decimal places.
This is not so good for financial applications where they want the total of 10 transactions to match the total of each number displayed but can be kind of important for scientific ones.
eg
someNumber.ToString("N3"));
Gives you three decimal places without changing the someNumber.
If this turned out to be wpf then you have stringformat you can use on a binding.
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML -
Can not change the number of decimal places in the normalization of result
dear all
i want to see the proportion of some data, for example, the income of May is 300, and the total income is 1000, i need to display it like 33.33% . so i set the
Calculate single values as normalization of result, and then it display 33.333%, i like to display only two number of decimal places, so i set the number of decimal places as 0.00, but i doesn't work, it still display three decimal numbers.
maybe you say i can use the percentage function like %CT %GT %RT, but i need to allow external access to my query, so the i can not use those functions.
can somebody helps me ? your advice is appreciated.hi,thanks for your advice, but that doesn't suit for my problem.
before i set the normalization of result, i can change the decimal values. After that i cann't.
In your thread, someone proposes use the T-code OY04. but this wouldn't help. As i change to other key figure, such as user quantity, when i set normalization of result, it still display 3 decimal values.
i think the point maybe lie in the normalization of result. please advise... thanks... -
Yielding the desired number of decimal places using the AVG function in t-sql
Hello again. Confused retired hobby coder having trouble setting up a scalar-valued function to return the desired number of decimal places from a AVG query.
Whenever I run the following script I get the number of decimals I desire:
Using the above I created a scalar-valued function as follows:
Running this function as: SELECT [dbo].[TestHCIPartial] (1,3) my return is -7.
Can you help me with the function causing it to yield the answer to 6 decimal places?
Thanks and regards, Minuend.You've not specified precision and scale in UDF return type. So you're leaving it to server to interpret it based on default settings
If you want exactly up to four decimal places tweak udf as below
ALTER FUNCTION..
RETURNS decimal(20,4)
AS
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
Altering number of decimal places of formatted number
Using http://java.sun.com/docs/books/tutorial/i18n/format/numberFormat.html I have worked out how to format a number, almost. When I follow the example in this tutorial that shows how format a double, it always rounds it to 3 decimal places. How do I alter the number of decimal places that this formatting procedure outputs? I used the US as the locale and English as the language. I am assuming that if these parameters are chosen, 3 decimal places is the output. Is this assumption correct?
Look at the next chapter :)
http://java.sun.com/docs/books/tutorial/i18n/format/decimalFormat.html -
Bex: overall Result: number of decimal places
Good day
How to I change the number of decimal places for the "Overall result" in a query?
Your assistance is appreciated.
Cj FaurieThanks for your response.
The number format in properties for the KF (formula created in query) has been set to '0' decimal places. I also use the "Average of all values <>0" in the calculate results for the KF. If you use "Summation" then the decimal will apply, but not with the "Average .....".
My "0CALMONTH" is in rows and results is based on this (set to 'never') as I want the Overall Result to display first as my chart is based on the OResult and not the individual figures.
"This is the layout of my report"
Territory Overall Result 2007/02 2007/03 2007/03
Boland 205.8333 21 242 355
The "overall result' should display as '206'. Why does the 'decimal place' not apply to "Average of all v...."?
Thanks
Cj -
Without to change the setting.how to set the decimal place to 7 for an UDF.
Without to change the setting, how to set the decimal place to 7 for an UDF?
Hi
Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
So i think you can not set the decimal places without changing the setting in display parameters.
i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
Hope it helps you
Regards
Vishnu -
Determine Number of Decimal Place using BigDecimal
I was interested to have the following getNumberOfDecimalPlace function :
System.out.println("0 = " + Utils.getNumberOfDecimalPlace(0)); // 0
System.out.println("1.0 = " + Utils.getNumberOfDecimalPlace(1.0)); // 0
System.out.println("1.01 = " + Utils.getNumberOfDecimalPlace(1.01)); // 2
System.out.println("1.012 = " + Utils.getNumberOfDecimalPlace(1.012)); // 3
System.out.println("0.01 = " + Utils.getNumberOfDecimalPlace(0.01)); // 2
System.out.println("0.012 = " + Utils.getNumberOfDecimalPlace(0.012)); // 3
I use the following code
public static int getNumberOfDecimalPlace(double value) {
final BigDecimal bigDecimal = new BigDecimal("" + value);
final String s = bigDecimal.toPlainString();
System.out.println(s);
final int index = s.indexOf('.');
if (index < 0) {
return 0;
return s.length() - 1 - index;
}However, for case 0, 1.0, it doesn't work well. I expect, "0" as result. But they turned out to be "0.0" and "1.0". This will return "1" as result.
0.0
0 = 1
1.0
1.0 = 1
1.01
1.01 = 2
1.012
1.012 = 3
0.01
0.01 = 2
0.012
0.012 = 3
Any solution?Please [don't cross-post!|http://stackoverflow.com/questions/2296110/determine-number-of-decimal-place-using-bigdecimal], it's considered rude. If you must do it, then at least link each post so that people can find out which answers you've already got in order to avoid duplicate work on our part.
Please read [_How To Ask Questions The Smart Way_|http://www.catb.org/~esr/faqs/smart-questions.html]. -
How do you increase or decrease decimal places
Does anyone know how to increase or decrease the number of decimal places in Numbers?
select the cell(s) then use the cell formatter to adjust the displayed number of digits. To open the formatter click the "Format" button in the top right corner.
Here is a number where the formatting is automatic:
Here is requested 2 significant digits: -
please help!! how can i configure my iphone 3gs because i've been updated a new version, i did it but it's hard to activate it again. this message i always recieved in my iphone
"We're sorry, we are unable to continue with your activation at this time."You phone was hacked. You can not get help with it here. Hacking / Jailbreaking voids any warraty and forfeits your right to support. Discussing jailbroken / hacked devices is forbidden by the terms of service here.
-
How can I configure iCloud so it doesn't restore deleted or moved emails on my Mac?
I moved to iCloud, and so far it looks like everything is where it's supposed to be. My question is about syncing. When I delete an email on my Mac, iCloud restores it. How can I configure iCloud so that changes I make on my Mac and my iPhone stay changed?
On the Mac in System Preferences > iCloud
Make sure Mail & Notes is selected.
ON the iPhone tap Settings > iCloud
Make sure Mail is switched on.
And try restarting your Mac and iPhone. -
How can I configure my new Mac Pro to output the timeline via HDMI
How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide. -
How can I configure printer with iPad to print only grey tones? This works fine from my laptop - not air printing from that one though. I can't find anywhere on the iPad how to do printer settings and this also seems not to be available as an option when doing a printout. In fact, no options seem to be available. Thanks in advance for reacting!
HermiThere is currently no option for this. You can give Apple feedback here:
http://www.apple.com/feedback/ipad.html -
According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
Integrity can be enabled when the system is not running on Storage Spaces. When
integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
fails the read operation by default. If you don’t want the read operation to fail, you
can configure ReFS to continue with the read operation. A related event will be logged
regardless.
So then how do I configure it to do that???
(And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
with integrity streams enabled, via format E: /fs:ReFS /i:enabled
For those who want more details, here's the situation:
I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
And an event ID 133 from ReFSv1 gets logged in the System log:
Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
This is indeed the correct default behaviour.
What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
been able to find anything.Hi Tommy,
>>How can I configure ReFS to NOT fail read operations when a checksum error is detected
We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
-Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.
Regarding this point, the following article can be referred to as reference.
Set-FileIntegrity
https://technet.microsoft.com/en-us/library/jj218351.aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Maybe you are looking for
-
How can I transfer pictures from my mac air to my iphone?
How can I transfer my photos from my Mac Air to my iphone?
-
How to edit BI Publisher Report Data Model in Fusion Apps?
Hello All, I am experiencing issues while modifying the BI Publisher data model in Fusion Apps. Here is the summary of issue, Please assist me. Issue: I have modified the SQL query of Data Set in Data Model, while saving it is prompting for Flex File
-
Digital Signatures on TechNet Gallery - thoughts?
I've recently obtained a code-signing certificate from DigiCert (who are awesome, and offer these certs for free to MVPs for personal use), and was thinking of going back and signing the various bits of script that I've posted to the TechNet Gallery.
-
How to display photos in reverse order (new to old) in photo stream?
In the main Photo Stream (my Photo Stream) which often contains many photos, is there a way to reverse the display order so the newest pictures are shown first? This was the default in one of the old software versions. It would nice nice to have a bu
-
Closed Captioning for Purchased TV Shows
Anyone know which TV shows (if any) have closed captions? I really want to buy the Family Guy series but I don't want to waste my money otherwise. Thanks for your support, -Ian B.