How can I control 4 sets of compact RIO system with my host PC?

Hi all,
As the title.
I want to control 4 sets of compact RIO system at the same time.
I have written TCPIP connection for two PC before.
But I never program to connect more than one PC.
If I need to connect more than one PC, should I set the PC's connection port different?
Could you provide me an example?
Thank you a lot.
Solved!
Go to Solution.

Hi StephenCh...,
you can calculate the transfer rate it depends on your network card. You'll find very good examples on that in the example finder, search for tcp/ip. You can use the server code on each of your cRIOs. Use the client to connect to your servers (cRIO), you only need to change the IP. If you need to connect to all at the same time, then you have to change the client program a bit, so that you are able to build four connections.
Where do you have problems? Did you already see the examples?
Mike

Similar Messages

  • How can I control the setting of quicktime x internet connection speed

    In apple website, They provides a lot of tutorial videos, But thanks to my internet low bandwidth, only low resolution of video can be seen. At the time of leopard(not snow) and quicktime 7, I found that if I select the bandwidth to "LAN" in quicktime control panel of system preference, the video size went up from 480 to 640 pixelin height (although more loading time..)
    Are there any way to control quicktime bandwidth in snow leopard? (quicktime X or quicktime 7 for sowleopard)

    Hi,
    1. How much clients can connect to an access-point (maximum possible vs. recommended)?
    ANS -
    here is the link for Maximum possible..
    http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/
    c70ccfg.html#wp1085099
    Recommended , Not more than 20 clients per AP.
    2.  Can I limit the maximum number of clients connecting to the same  access-point in the controller gui? I only found how to configure  thresholds for sending traps when a specified number of connected  clients on an ap is reached.
    ANS - Here is the software bug whic we had raised with thre development team..
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj94508
    Symptom:
    There should be a way to limit the number of wireless clients that can associate to a lightweight AP.
    Conditions:
    Workaround:
    3. How can I balance the number of clients between two adjacent ap which are using the same SSID?
    ANS- You can configure the feature Aggressive load balancing on the WLC, this may help..
    lemme know if this answered your question..
    Regards
    Surendra
    ====
    Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

  • How can I control a Festo (MH..4) Valve with Labview?

    Hey,
    i'm very new to this Labview stuff and have a minimal background in electronics so I'm struggling with trying to sort this one out.
    I have a high-frequency valve (~400Hz) that we would like to control via the 9 pin RS232 port using labview. is this possible?
    i imagine we will need an interface between the computer and the the valve (which requires a 24Volt digital signal) but I am not sure what to use. Buying a stock pc control board from LabVIEW is not an option because I will be running this from a laptop.
    cheers
    Nic

    Nic,
    you can easely control 2(3) of the 9 Pins of the RS232 Port with the VISA Propeties (Visa Open, VISA Propety (Modem line settings: DTR and RTS state (and Break (TDx)) , VISA Close)
    However, since the serial driver it is not made for this type of timed digital IO, I'm not shure about the resolution you might get. If you have a scope, then do some loop testing and move some windows or do some other system load :-)
    Have a nice weekend
    Greetings from Germany
    Henrik
    LV since v3.1
    “ground” is a convenient fantasy
    '˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

  • How can I control external devices using a touch screen with a standalone LabVIEW app

    For my senior design project my group and I created a hybrid extended range vehicle with 90 Li+ Batteries thats charged by a 15 kW generator and/or that is also being charged by a 5 kW fuel cell. Currently, our system is capable of measuring voltages off of the batteries and displaying them on a laptop via LabVIEW. To process this data, we are using a cRIO FPGA. What we would like to do now is have a touch screen for the driver to choose what power source charges the batteries as well as monitor a pressure reading coming from the fuel cell tank. 
    What sort of small touch screens allow for LabVIEW to be uploaded on and used for controls?
    Does a cRIO have the capability to power such a screen and handle the data transfer from the fuel sensor and switching relays (for switching on and off powersources)? 
    Do I need an additional license for creating standalone applications and how would i go about creating a standalone app?
    sorry for so many question. Any reply helps. Thanks!
    Solved!
    Go to Solution.

    That sounds like a pretty interesting project.  If you are interested, National Instruments hosts a Student Design Competition where you can win cash or a trip to Austin for NIWeek.
    steve215 wrote:
    What sort of small touch screens allow for LabVIEW to be uploaded on and used for controls? 
    NI does sell Touch Panel computers that can be used to control LabVIEW applications.  You can find more information here: HMIs and Industrial Touch Panels and here: LabVIEW Real-Time and Touch Panel Deployment and Replication Resources. Our 6-inch touch panel computers run Windows CE, so programming on them is a little different than programming on a full Windows OS.  You may find the Getting Started with the LabVIEW Touch Panel Module useful.
    You can use third party devices with the LabVIEW Touch Panel Module, although you will need a deployment license for it.  More information can be found in the getting started guide.
    If you were able to send the cRIO information over a network (which from your description sounds unlikely), you may be able to use a smartphone to control your application.  More information can be found on our Community Smartphone Group.
    steve215 wrote:
    Does a cRIO have the capability to power such a screen and handle the data transfer from the fuel sensor and switching relays (for switching on and off powersources)? 
    If you were using the 6-inch touch panels, they require 18 to 32 VDC (the fuse becomes an open circuit if input level exceeds 33 VDC).  The data transfer from the switching relays can be monitored and changed with the touch panel.
    steve215 wrote:
    Do I need an additional license for creating standalone applications and how would i go about creating a standalone app? 
    If you went the touch panel route, you would need to purchase the LabVIEW Touch Panel Module, and a touch panel.  The NI touch panels come with a touch panel deployment license.  Step-by-step guides for creating the standalone app can be found in the Getting Started with the LabVIEW Touch Panel Module guide. 
    Regards,
    Elizabeth K. 
    National Instruments | Applications Engineer | www.ni.com/support 

  • How can I control a button from one swf file to another swf file?

    Hi,
    I have a main.swf file. From that file I am accessing the external.swf file which is an external file.
    Now, how can I write code on my main.swf file for the button which is on my external.swf file?
    Activities.MainPanel.close_btn.addEventListener(MouseEvent.CLICK, btnClickClose);
    Activities.MainPanel.close_btn (This buttons is actually on external.swf file, but I want to write code on main.swf file to execute it on external.swf) how can I control one swf button on other swf file?
    Thanks.

    Here's some example code that you should be able to adapt to your needs.
    // create a new loader object instance...
    var loader:Loader = new Loader();
    // make the download request...
    var request:URLRequest = new URLRequest("external.swf");
    // add a complete event listener to the loader
    loader.contentLoaderInfo.addEventListener(Event.COMPLETE, completeHandler);
    // start the actual loading process...
    loader.load(request);
    // create a new empty movieClip instance, you will put the loaded movie into this movieClip once its loaded
    var externalMovie:MovieClip;
    // this function is called when the download has finished and the file is ready to use...
    function completeHandler(event:Event):void {
       // set the contents of the loaded movie to the new empty movieClip...
               externalMovie = MovieClip(event.target.content);
       // add this new movie to the display list...
       addChild(externalMovie);
    Now you can refer to the loaded movie with the instance name "externalMovie". So if, for instance, you want to address a button in the loaded movie, you could write something like this on the main timeline:
    externalMovie.addEventListener(MouseEvent.CLICK, btnClickClose);
    function btnClickClose(event:MouseEvent):void {

  • How Can I Control Format & Color Of Text Links?

    iWeb appears to colorize and/or box or underline link text according to its own "uncontrollable" set of criteria.
    How can I control the color of a text hyperlink and turn automatic link underlining OFF?

    you CANNOT do that in iWeb. there are the following ways around iWeb which solve it:
    http://www.rowan-cottage.co.uk/Site/CSSiniWeb.html
    im bringing up a video tutorial soon, so check my site in the future!
    max

  • How can I control the size of a cell in the GridBagLayout?

    Hi,Swing Gurus
    I am developing a swing-based program using JBulider5 enterprise.
    It seems to me that the GridBagLayout is really a hard nut!
    How can I control the size of a cell in the GridBagLayout?
    It seems that I cann't control the size of a cell directly.
    But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
    Thx in advance!
    Regards,
    Justine

    hi,i have not done what you are asking but there are fields like
    COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

  • How can i control the timings of my slideshow using iphoto on my ipad

    Q: 1 how can i control the timings of my pupil's slideshows using iPhoto on the iPad?
    Q: 2 then how can i export them?
    Q: 3 how can i combine them from 8 individual slideshows to 1 for showing to their parents at an assembly?
    many thanks in anticipation of your collective help
    brian

    Here's my take on the same thing:
    Short answer: the dpi is set when you decide what size you're printing at.
    Long Answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
    Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
    So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
    For more see http://www.rideau-info.com/photos/mythdpi.html
    Regards
    TD

  • How can I control the list of cipher suites offered in the SSL Client Hello message? I want to forbid MD5 and RC4.

    How can I control the list of cipher suites offered in the SSL Client Hello message?
    I want to limit my browser to negotiating strong cipher suites. I'd like to forbid DES, MD5 and RC4.

    Set the related SSL3 prefs to false on the about:config page (Filter: security.ssl3.).
    *http://kb.mozillazine.org/about:config

  • Why does a new desktop creation unexpectedly initiate with a background differing from the originating desktop? How can I control or eliminate this behavior?

    Why does a new desktop creation unexpectedly initiate with a background differing from the originating desktop? How can I control or eliminate this behavior?

    CT, I suspect that I either mistated the question or don't understand how to set the default back ground.  In any case, with the background that I have set in system settings, and this is the background to which my sessions consistantly boot, new desktops come up for the second or up to the third background with this initially set background. Then in the third or fourth desktop creation (I seldom go beyond four), the background for the new desktop, is one that I was using one or two months ago...

  • How can i control concurrent programs?

    Hi
    When ruinning GL & OPM concurrent programs, de-grades server peformance. How can i control it? I want to restrict the user not to submit or does not run during office-hours. How can it be achieved?
    Regards
    Ariz

    Ariz,
    Please mention the application release, the database version and the OS.
    Was the performance accepted before? If yes, what changes have been done recently?
    Is the issue with standard or custom concurrent programs? Also, please mention the concurrent program names (if possible).
    Do you run "Gather Schema Statistics" concurrent program on regular basis?
    To find out why those concurrent program affects the performance, enable trace as per (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12) and generate the TKPROF file.
    You could schedule the concurrent program to run at certain times -- See "Oracle Applications System Administrator's Guide Documentation Set" for details.
    Oracle Applications Documentation
    http://www.oracle.com/technology/documentation/applications.html
    Regards,
    Hussein

  • BPC 10.0 - How can I control security at Environment level?

    Dear All,
    How can I control environment level security in BPC?
    i.e.
    User1 can work on only ENV01
    User2 can work on only ENV02 & ENV03
    etc...
    I believe this has to be done at BW level, right? If so, how can I do that in BW? Else, how can I achieve this?
    Thanks,
    Peri

    Hi Peri,
    yes, the admin panel is within the environment. So when you add users you add them to that specific environment. You can then log onto another environment and add a different set of users.
    Those users you wand to add need specific SAP role in the BW so you can see them in the first place.
    BR,
    Arnold

  • How can we control the standard filed using CUF?

    Hello
    We use SRM Server 5.5 (SP 07)
    We want to make the Price field as display on shopping cart screen.
    We created CUF for PR type. We have PR01 and PR02.
    If PR type is PR01, we want to make Price field as display.
    So We tried to use BBP_UI_CONTROL_BADI. But this BADI is not working.
    We found notes for this badi and applied this note to our system.
    Notes number:
    1053594
    1046796
    1040879
    1058238
    1021742
    But we still have problem. The parameters IS_HEADER and IS_ITEM are not filled.
    How can we control price field as display, when we choose the PR type with PR01?
    Thank you,
    Best Regards,
    SH.

    Hi,
      You can use the BADI BBP_DOC_CHANGE_BADI along with BBP_UI_CONTROL_BADI.Check the Transaction type calue in BBP_DOC_CHANGE_BADI  badi and acc set a flag(using SET stmt) and pass this flag to the BBP_UI_CONTROL_BADI(using GET parameter) and then change the Field property for PRICE field.
    BR,
    Disha.
    Pls reward points for useful answers.

  • How can I control a mac mini connected to a benchmark dac 2 for the purpose of listening to 24/192 audio files?

    How can I control a mac mini connected by USB to a Benchmark DAC 2 for the purpose of listening to 24/192 music downloads?

    Hello,
    About the dac 1, but may apply to the dac 2 as well in some ways...
    Here are more details:
    1) The current version of iTunes (7.5) for OSX is very broken. Some older versions work properly, but 7.5 introduces truncation and DSP artifacts that can measure as high as –80dBFS. These levels are easily audible. There is no system configuration that will permit transparent playback from 44.1kHz sources with iTunes 7.5. Curiously, the only format that works properly in 7.5 is 24-bit/96kHz. This iTunes problem has nothing to do with USB communications, as the results are the same when using the built-in optical port on our PowerBooks. As a workaround, we suggest using the free VLC for Mac player. VLC works perfectly with all formats (provided OSX is set to match the sample rate of the files being played). We highly recommend the VLC player for OSX users, and strongly advise against using iTunes. We will attempt to identify which versions of iTunes work and which ones don't. But beware, iTunes updates itself without user intervention. One of our test computers "upgraded" itself to the dysfunctional iTunes 7.5.
    2) OSX still does not have the ability to follow sample-rate changes. We consider this a nuisance for most users and a show-stopper for users who want to play a mixed list of 44.1kHz and 96kHz material. An OSX sample-rate mismatch will invoke the very-poor-quality sample-rate conversion that is built into OSX. The iTunes 7.5 bug seems to be locking on this sample-rate conversion at all sample rates other than 96kHz. Until this is fixed, OSX is not the operating system of choice for audio playback.
    http://www.stereophile.com/content/benchmark-dac1-usb-da-processor-headphone-amp lifier-manufacturer-comment

  • How can i control weather a custom transaction is executed

    How can i control whether a custom transaction containing delete sql statement is executed using the results of a record set?
    The custom transactions dialog does no allow me to use anything more than sql and has no conditions so i cannot control flow their.
    Triggers seem not to be able to access record sets defined on the same page and internally seem able to perform select staments but unable to return result sets.
    Please help if you can ?

    What exactly are you trying to do?
    The following partial code-snippet checks a value on a form and performs a sql select query if a condition is met, it could perform any valid sql...
    //start GWB_SetSubscribedToThread trigger
    function GWB_SetSubscribedToThread(&$tNG) {
    //Get the current values from the form
    $threadid = $tNG->getColumnValue('NbForumMessageID');
    $userid = $tNG->getColumnValue('CreatedBy');
    $subscribed = $tNG->getColumnValue('Subscribe');
    //Check current subscription
    $query = "SELECT ms_RandomKey FROM messagesubscribe WHERE ms_MessageTypeID = 1 AND ms_ThreadID = " . $threadid . " AND ms_UserID = " . $userid ;
    // This syntax doesn't work for some reason??
    //$result = $tNG->connection->execute($query);
    //This syntax does work
    $result = mysql_query($query);
    if (!$result) {
    $message = 'Invalid query: ' . mysql_error() . "\n\n";
    $message .= 'Query String: ' . $query;
    $message = nl2br($message);
    die($message);

Maybe you are looking for