How can I control a hud interface via the keyboard?

I can nowwhere find a way to control a HUD (heads-up display) via the keyboard
any ideas?
I do not like this at all...
if I remember correctly old fashioned inspectors (like the one in the Finder by option selecting "Get Info") could be controlled via keyboard. Control F6
Those were called "Floating window" and for it a keyboard shortcut could be defined in the Keyboard Preferences...
I couldn't figure out yet how to "focus" a HUD. Well to correct: the HUD in Preview to change the color can be activated by Control F6, but the HUDs in Aperture I couldn't figure out yet
any ideas?
Michael

I figured it out. Just make a full-screen invisible button
and place it on a layer on each frame.
For insatnce, Actions - Button for frame 2:
on (keyPress "<PageDown>") {
gotoAndStop (3);
on (keyPress "<PageUp>") {
gotoAndStop (2);
sends the show forward to frame (slide) 3 with a press of the
remote's "Next" button and sends it back to frame (slide) 1 with a
press of the "Back" button.
I have a Stop action on each frame.
This allows me to control a Flash show just like a Powerpoint
show. Cool.

Similar Messages

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

When opening a Photoshop file with Bridge, how can I control which version of Photoshop the file wil

When opening a Photoshop file fthrough Bridge, how can I control which version of Photoshop the file will open in?
I store my PSD files adjacent to the original RAW file from which it was derived.
If I open the file folder and double click on that PSD file, it opens in CS6. But,if I use Bridge (CS6) to navigate to and open the same file, it first opens Photoshop CS5 and then opens that PSD file in CS5.
How can I control which Photoshop will open a file I select when opening it through Bridge?.

Interesting, but it doesn't give a clue what I'm supposed to do. No Photoshop ducuments listed.
Look at the PSD file on the location Curt provided and search for Photoshop Document. Next to it ideally should show Adobe Photoshop CS6 if you have Bridge CS6 open. Click on it to provide the fly out menu and choose the correct Photoshop from the list.
But probably something went wrong with your install. By default Bridge chooses the latest version of PS to open its file in.
Maybe a reset of the preferences might also help you. Can you provide more details about OS version etc.
And do you have a good reason for keeping your Raw and finished files in the same location. Personally I keep them apart and use a proper file name convention (yyyymmdd and details) so I can easily search for the DNG files in my archive if I needed them but I don't make mistakes in opening the wrong one

How can I get an Infoprovider list via the BI XML/A SOAP interface?

I have a followup question for this as well. Currently with xMII we are using the XML/A SOAP interface to query against remote enabled queries in BI. Is it possible through this interface to request a list of InfoProviders? I know that through MDXTEST in SAP GUI there is a list of providers there but is that available through the XMLA interface? The BAPI that I found that will do this is BAPI_MDPROVIDER_GET_CUBES with the CAT_NAME value set to $INFOCUBE. This name/description value set is what I am looking for.

Sorry about that. I had the link ready to paste but neglected to do so: http://acrobatusers.com/tutorials/getting-external-data-into-acrobat-x-javascript
The idea is that you can read in data from an external or attached file, but it will need to be a different format such as XML, tab-delimited text, or CSV, which can all be exported from a spreadsheet.

How can I control video presentations on opening the browser.

The way I work is to allow all tabs to stay open until I have read them or until I have just too many to manage!!! This means when I reopen the browser I may have 5 or 6 videos which open and begin to chatter. I need to be able to close all videos with one action otherwise I have to go through all tabs until I find the chattering culprits! Sometimes I can't even find all of them and I have an "unknown" chatterer which I can't get rid of. Please tell me if it is possible to control all with one action - without losing the tabs and how to do this. If it is not yet possible may I suggest a modification in the very near future which allows e to do this because it is wasting a lot of time for me when I should be working.
Reply please to [email protected] ...soonest.

You don't.
There is no infrared receiver on the iPhone.

How can I validate an email password via the BIS site

I have received a message asking me to validate the password for an MSN email account I access through a work Curve 8520. I have done this before without any problem but now my BB says there is a problem connecting to the server so I can't access my email accounts to validate. Email is still coming through on other accounts. I tried to use the PC and access through the Blackberry Internet Server page but can't find anywhere there to access email account settings (all the guides say email settings are on the left hand pane of the page but not on any page I have found?

Hey idilks,
Welcome to the forums.
Have a look at this article, it should help you with your issue.
How to re-validate your Windows Live Hotmail, MSN, and Bell Sympatico email integrations
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How can I control a FLV video using the main play bar (not the FLV skin)?

I need to have the ability to play/pause an FLV video in a slide with the main play bar. Research has shown me that in previous versions, there was a "synchronize with project" checkbox that enabled this. I cannot find this in version 8. Is there a different way of doing this?

Hello ,
Welcome to Adobe Forums
Try inserting the video as Multi-Slide Synchronized Video instead of Event Video ,
Then down below there will be an option to Distribute the video across the slides and you can select from Slide n to n ,(Where n is your slide number).
Hope this will serve your need.
Regards
Himanshu

How can I control selection on a PDF

I have Acrobat Pro 9 Pro build 9.4.6 and am constantly exporting documents from indesign to .pdf, and also building docs in the 'combine' feature from mixed pages.
While everything seems to go reasonably well, I have a few problems that are due either to my ignorance, or bugs.
1. The biggie; How can I control what I select, for the purpose of copying, moving and deleting? When I drag the touch-up object tool over my selection, it selects what it wants to most of the time; sometimes it selects (i.e., puts a light blue box around) the entire page, instead of my selection (no pages are scanned). There are very few instances when I get exactly what I want; there are usually a few lines above or below, no matter how careful I am in my selection. The funny thing is that this is not a constant; sometimes, the tool works perfectly! and I have my heart in my mouth every time I really need it to work, hoping that it will not force me to go back to Indesign to make minor corrections. Perhaps my problems are connected to options I select when exporting my indds, but I've tried checking, clearing, and selecting various combinations and nothing seems to work.
Sometimes, the text selection tool is strange; a wide blue swath develops over the selected text, even though it is still usually possible to edit the text in this condition. And BTW, is there anything to do about the fact that some text can't be edited at all because a suitable font replacement can't be found? Can't a font be added somehow that will take care of this?
2. Headers and Footers; fairly effortless, but if the footer contains two rows and I want them centered, the second row looks centered in the preview but not in the doc. I have to go back to the footer dialog and guesstimate how many spaces to place before the second row to get it to look centered. Also, is there any way to place a logo in a header? That would be one of my requests for the next version of Acrobat, if not.
3.Hyperlinks; they don't always work,even though I check Hyperlinks in the Export settings. Sometimes yes, sometimes no.
4. Typwriter toolbar; it also seems to offer font and size changes whenever it feels like it, and I've tried all different orders of typing, selecting, etc.

It's me again, sorry! I wanted to save what I'd written, and my message popped up to the board.
Thank you for any advice anyone has!
PS My indd and acrobat are the same version, as they came in the same package (CS4). Windows XP sp3.
Oh, one more thing I just remembered, as long as I'm complaining; sometimes if I place an object (the logo) and copy it to another page, it disappears on the original page, as if I've cut it. Any fix for that? (strange how I can edit tmy 'reply' but not my original post...well, at least I found where to ask a question fairly quickly!)

How can I control a LabView VI using a C++ script/program?

Hi,
I am a developer of a satellite communications system that is being used in
a satellite project I am working on at the University of Colorado - Boulder.
The project is called 3CS. We have built a simple LabView program that uses
some of the server routines to transfer data via TCP/IP protocol. The basic
VI initializes the radio hardware at the site the satellite is currently
over and then opens a data stream. The data is then downloaded back to our
servers via secure VPN. My question is this: How can I control a VI using
a language like C++ to execute certain parts of the VI. I basically have a
VI that listens for radio packets. My program then strips off the satellite
radio ID and protocol information
. I need to get this information into the
VI remotely through a C++ script. Any help would be greatly appreciated.
Sincerely,
Ryan R. Fligg
Colorado Space Grant College
Electrical and Computer Engineering
University of Colorado - Boulder

Hello fellow Boulderite,
The easiest way would probably be to use the application builder to create a DLL from the VI. The other option is to use the LabVIEW ActiveX interface. There are some examples of using C++ to control LabVIEW in the example library of the NI Developer Zone.

Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

Dear Community,
how can I connect SCSI tape recorder via USB to iMac ?
Is there any adapter/converter on the market now ?
Cheers, Marek

Thanks Jan.
Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
Best regards,
Marek

How can I control the size of the af:InputText?

Hi,
How can I control the size of the 'af:InputText' on the UI, without using columns & rows attributes. Even though I am using width & height attributes, the changes are not getting reflected in the UI.
Thanks,
Rajesh.

Hi,
It is inside a 'af:PanelBox'. So, the parent container also determines the size of the child? Here I need a create a 'pidgin chat window' kind of an interface with a fixed size top-level container, inside which I willl put all my components. The code looks something like this:
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1" partialTriggers="it1">
<af:messages id="m4"/>
<af:form id="f1" partialTriggers="it1">
<af:panelBox text="" id="pb1" background="dark" type="stretch"
titleHalign="start" ramp="highlight"
inlineStyle="width:350pt; height:500pt; margin:0.5pt; padding:0.5pt; border-width:0.5pt; "
partialTriggers="it1">
<af:spacer height="15pt" id="s1"/>
<af:inputText id="ot1"
columns="82" rows="25" wrap="hard"
partialTriggers="it1"
value="#{ChatClientBean.chatLog}"
binding="#{ChatClientBean.outputChatTextBox}"
visible="false">
</af:inputText>
<af:spacer height="27pt"/>
<af:inputText id="it1" inlineStyle="width:200pt; height:100pt;"
valueChangeListener="#{sessionScope.ChatClientBean.sendMessage}"
autoSubmit="true" partialTriggers="it1"
binding="#{ChatClientBean.inputChatText}"/>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Thanks,
Rajesh.

How can I control the EJB's Transaction with entity bean

If I use entity bean, the Transaction is managed by container.and I want to create JDBC Connection by myselft ,not the Datasource,how is the transaction is controlled by the container,if transaction is not controlled ,how can I control it??

Hi,
If you want to control the transaction your self then you need to use javax.transaction.UserTransaction interface and methods defined by it.
Hope this helps
Vishal

How can i increase performance of interface

while i am runing interface in odi it takes 5 days.so how can i increase performance of interface.
source contains: 30 crores of records
i want copy 30 crores to target.
source:oracle
target:oracle
i am using lkm:lkm sql to sql
IKM:ikm control append
Edited by: 967609 on 25 Oct, 2012 2:55 AM
Edited by: 967609 on 25-Oct-2012 10:13

IT IS CREATED VIEW AND SYNONYM.
MY SERVER NAME IS REPA,
ANTHOER SERVERNAE IS MISREPL
create or replace view REPA.C$_0XX_TR
     C1_TJD,
     C2_CID,
     C3_BOO,
     C4_TYPE,
     C5_GRP,
     C6_POAM,
     C7_BALINT,
     C8_DUIN2,
     C9_CRLMT,
     C10_IRN,
     C11_TDUE,
     C12_CHKHLD,
     C13_WDLMT,
     C14_ZSBU,
     C15_BAL,
     C16_MCHG,
     C17_LCHG,
     C18_ACR,
     C19_CR,
     C20_DR,
     C21_CRCD
) as
select * from (
select
     XX.TJD     C1_TJD,
     XX.CID     C2_CID,
     XX.BOO     C3_BOO,
     XX.TYPE     C4_TYPE,
     XX.GRP     C5_GRP,
     XX.POAM     C6_POAM,
     XX.BALINT     C7_BALINT,
     XX.DUIN2     C8_DUIN2,
     XX.CRLMT     C9_CRLMT,
     XX.IRN     C10_IRN,
     XX.TDUE     C11_TDUE,
     XX.CHKHLD     C12_CHKHLD,
     XX.WDLMT     C13_WDLMT,
     XX.ZSBU     C14_ZSBU,
     XX.BAL     C15_BAL,
     XX.MCHG     C16_MCHG,
     XX.LCHG     C17_LCHG,
     XX.ACR     C18_ACR,
     XX.CR     C19_CR,
     XX.DR     C20_DR,
     XX.CRCD     C21_CRCD
from     REPA.XX@REMOTE XX
where     (1=1)
create synonym     STG.C$_0XX_TR
for           REPA.C$_0XX_TR@remote
insert into     STG.XX_TR
     TJD,
     CID,
     BOO,
     TYPE,
     GRP,
     POAM,
     BALINT,
     DUIN2,
     CRLMT,
     IRN,
     TDUE,
     CHKHLD,
     WDLMT,
     ZSBU,
     BAL,
     MCHG,
     LCHG,
     ACR,
     CR,
     DR,
     CRCD
select
TJD,     CID,
     BOO,
     TYPE,
     GRP,
     POAM,
     BALINT,
     DUIN2,
     CRLMT,
     IRN,
     TDUE,
     CHKHLD,
     WDLMT,
     ZSBU,
     BAL,
     MCHG,
     LCHG,
     ACR,
     CR,
     DR,
     CRCD
FROM (
select
     C1_TJD TJD,
     C2_CID CID,
     C3_BOO BOO,
     C4_TYPE TYPE,
     C5_GRP GRP,
     C6_POAM POAM,
     C7_BALINT BALINT,
     C8_DUIN2 DUIN2,
     C9_CRLMT CRLMT,
     C10_IRN IRN,
     C11_TDUE TDUE,
     C12_CHKHLD CHKHLD,
     C13_WDLMT WDLMT,
     C14_ZSBU ZSBU,
     C15_BAL BAL,
     C16_MCHG MCHG,
     C17_LCHG LCHG,
     C18_ACR ACR,
     C19_CR CR,
     C20_DR DR,
     C21_CRCD CRCD
from     STG.C$_0XX_TR
where          (1=1)
) ODI_GET_FROM
i am getting following error
ODI-1228: Task INT_DBLINK (Integration) fails on the target ORACLE connection STG.
Caused By: java.sql.SQLException: ORA-12154: TNS:could not resolve the connect identifier specified
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3954)
     at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1539)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
     at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:558)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:662)

How can I control the zoom on my mac mouse?

How can I control the zoom function on my mouse? In the middle of working on things my hand will rub the mouse by accident and all of a sudden the context within the screen is large. I have no idea of how to work this feature on my mouse and most times to get it to return to normal, I have to escape out of the work I am performing.

If you are pressing the "Control" button on the Mac keyboard, scrolling up will zoom in and scrolling down will zoom out. You can disable this if it annoys you through System Preferences > Universal Access. If you are using Mountain Lion, it would be System Preferences > Accessibility.
Uncheck the in the "Seeing" or "Zoom" section that says "Use scroll gesture with modifier keys to zoom". It may be slightly different if you have an older OS X version. I have Mountain Lion and am going off of memory on the older versions.

How can I control a button from one swf file to another swf file?

Hi,
I have a main.swf file. From that file I am accessing the external.swf file which is an external file.
Now, how can I write code on my main.swf file for the button which is on my external.swf file?
Activities.MainPanel.close_btn.addEventListener(MouseEvent.CLICK, btnClickClose);
Activities.MainPanel.close_btn (This buttons is actually on external.swf file, but I want to write code on main.swf file to execute it on external.swf) how can I control one swf button on other swf file?
Thanks.

Here's some example code that you should be able to adapt to your needs.
// create a new loader object instance...
var loader:Loader = new Loader();
// make the download request...
var request:URLRequest = new URLRequest("external.swf");
// add a complete event listener to the loader
loader.contentLoaderInfo.addEventListener(Event.COMPLETE, completeHandler);
// start the actual loading process...
loader.load(request);
// create a new empty movieClip instance, you will put the loaded movie into this movieClip once its loaded
var externalMovie:MovieClip;
// this function is called when the download has finished and the file is ready to use...
function completeHandler(event:Event):void {
   // set the contents of the loaded movie to the new empty movieClip...
           externalMovie = MovieClip(event.target.content);
   // add this new movie to the display list...
   addChild(externalMovie);
Now you can refer to the loaded movie with the instance name "externalMovie". So if, for instance, you want to address a button in the loaded movie, you could write something like this on the main timeline:
externalMovie.addEventListener(MouseEvent.CLICK, btnClickClose);
function btnClickClose(event:MouseEvent):void {

How can I control a hud interface via the keyboard?

Similar Messages

Maybe you are looking for